Professional Documents
Culture Documents
WCS 8034
WCS 8034
2014
Edition
CONTACT
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
HOURS
1.1 Gather information on 1.1.1. Define structure design according to
1. RECOGNIZE FUNDAMENTAL Planning and Design Process specification
OF STRUCTURAL DESIGN 1.1.2. Describe stages of structural design for every
feature stated below according to specification:
Planning and conceptual Design
Prelimenary analysis and design
Detail analysis and design
1.2 Identify limit state design and 1.2.1 Define limit state design and design criteria as
design criteria stated in specification
1.3 Gather information on load 1.3.1 Describe load and design safety for every
and design safety feature stated below according to specification:
Identification of load path in structure
Classification of gravity load on structures
Pertmanent vertical load on structure
Imposed vertical load on structure
Imposed load on floor
Imposed load on roof
Wind load on structures
Design load and envelope
Partial safety factors for load
Characteristic values of load
CONTACT
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
HOURS
2.1 Identify simply supported 2.1.1 Specify singly and doubly reinforced concrete
2. DESIGN REINFORCE CONCRETE beam beams for compliance with relevant codes and
BEAM accepted industry construction principles.
2.1.2 Assess Beam specified in building's plan for
structural integrity and compliance with
relevant codes and accepted industry
construction principles.
2.1.3 Define relevant subjects with singly reinforced
concrete beams stated below according to
Last Edited 4-7 Nov 2014
Module Page 3/11 Document Page 3
November
2014
Edition
specification:
Tension reinforcement steel ,As
Effective Depth,d
Shear reinforcement
Minimum areas of reinforcement
2.2 Determine singly reinforced 2.2.1 Design singly reinforced concrete beams by
concrete beams design determine features stated below for
compliance with the design process and
structural integrity of proposed structure ;
Characteristic loads
Design Load
Ulimate bending moment,M
Ultimate moment of resistance, Mu
Tension reinforcement
Minimum main reinforcement
CONTACT
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
HOURS
3.1 Identify type of slab 3.1.1 List down type of slab as required for designing
3. DESIGN REINFORCE process.
CONCRETE SLAB 3.1.2 Assess Slabs specified in building's plan for
structural integrity and compliance with
relevant codes and accepted industry
construction principles.
3.2 Determine reinforced concrete 3.2.1 Design one way spanning slab design by
slab design determine features stated below for
compliance with the design process and
structural integrity of proposed structure
Design loads
Design bending moment
Ultimate bending moment
Main reinforcement
CONTACT
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
HOURS
4.1 Identify type of column 4.2.1 Define type of column stated below as
4 DESIGN REINFORCE CONCRETE required for designing process:
COLUMN Short and slender column
Braced and unbraced column
4.2 Determine reinforced concrete 4.2.1 Design short-braced reinforce concrete column
Column design for compliance with the design process and
structural integrity of proposed structure
CONTACT
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
HOURS
5.1 Identify type of foundation 5.2.1 List down type of shallow as required for
5 DESIGN REINFORCE CONCRETE designing process:
FOUNDATION
5.2.2 Assess foundation specified in building's plan
for structural integrity and compliance with
relevant codes and accepted industry
construction principles.
5.2 State Ground pressure and 6.2.1 Specify Ground pressure and plan area of
plan area of foundation foundation for compliance with the design
process
5.3 Determine reinforced concrete 5.3.1 Design reinforce concrete pad foundation by
foundation design determine features stated below for
compliance with the design process and
structural integrity of proposed structure
Plan area of the base, Ab
Bending reinforcement
Last Edited 4-7 Nov 2014
Module Page 7/11 Document Page 7
November
2014
Edition