Professional Documents
Culture Documents
WELCOME TO POWERSOFT SERVICE TRAINING COURSE Level. 1. (Racks Amps Only) Rev. 15 May 2017
WELCOME TO POWERSOFT SERVICE TRAINING COURSE Level. 1. (Racks Amps Only) Rev. 15 May 2017
Ottocanali HGT 4K4, 8K4, 12K4 with or without DSP, ETH board
X Series X4, X8
K SERIES
K LGT Series layout
K STDREMPLUG
SM0000641.R
AMP BOARD
SMD00565.R
P.S. BOARD
SMD00880.R
K2 RES BOARD
SM000526.R
DRIVER BOARD
K3 SM000291.R
DSP BOARD
SM000640.R
K CTRL BOARD
SM000741.R
AESOP BOARD
SM000579.R
K FRONT BOARD
SMC00635B
K2 KLAMSV BOARD
CS000444
K3 KLALSV BOARD
CS000455
Duecanali
KLALSV BOARD
CS000445
K2
K3
Duecanali KLAMSV BOARD
CS000444
AMP BOARD
SMD00528.R
P.S. BOARD
SMD00642.R
K6 RES BOARD
SM000289.R
DRIVER BOARD
(K8) SM000291.R
KALSU BOARD
SM000404.R
K FRONT BOARD
SMC00635B
Vers. DSP AESOP
K STDREMPLUG
K HGT Series layout SM0000641.R
AMP BOARD
SMD00559.R
P.S. BOARD
SMD00651.R
RES BOARD
SM000289.R
DRIVER BOARD
K20 SM000291.R
KALSU BOARD
SM000404.R
DSP BOARD
SM000640.R
K CTRL BOARD
SM000740.R
K FRONT BOARD
SMC00635B
Vers. DSP AESOP
K STD, HGT Series layout
K6 KAMSV BOARD
CS000440
(K8)
KALSV BOARD
K10 CS000376
K20
KALSV BOARD
CS000376
K6
(K8)
K10
KAMSV BOARD
K20 CS000440
KLAMSV BOARD
CS000444
K6
(K8)
K10
KAMSV BOARD
K20 CS000440
Warning
Please refer to the KCRTL board replacement procedure for
tuning up the trimmer for output current offset calibration
Vers. DSP AESOP mandatory requirement after the CTRL board replacement.
Duecanali
K STDREMPLUG
Duecanali SM0000641.R
AMP BOARD
SMD00581.R
P.S. BOARD
3904 SMD00880.R
RES BOARD
5204 SM000526.R
DRIVER BOARD
SM000291.R
K CTRL BOARD
SM000741.R
K FRONT BOARD
SMC00636B
Vers. DSP
Vers. DSP AESOP
Duecanali
AMP BOARD
SMD00581.R
3904
5204
K FRONT
BOARD
SMC00636B
Vers. DSP
Vers. DSP AESOP
K SERIES KCTRL – DSP – AESOP boards
K2, K3 KCTRL BOARD p.n. SM000741.R K2, K3 DSP BOARD p.n. SM000640.R K2, K3 AESOP BOARD p.n. SM000579.R
K6, K8, K10 KCTRL BOARD p.n. SM000717.R K6, K8, K10 DSP BOARD p.n. SM000640.R K6, K8, K10 AESOP BOARD p.n. SM000579.R
K20 KCTRL BOARD p.n. SM000740.R K20 DSP BOARD p.n. SM000640.R K20 DSP AESOP BOARD p.n. SM000579.R
K2, K3, K6, K8, K10, K20 AESOP BOARD p.n. SM000579
K2, K3, K6, K8, K10, K20 DSP BOARD p.n. SM000640.R
K2, K3, K6, K8, K10, K20 KCTRL BOARD p.n.
SM000XXX.R
SMD00611 / SMD00880 LED MEANING
D67
K3
D39, D40
D9
K6 D75, D76
(K8)
K10 D60
D61
D62
D9 Green led VAUX +15
D63
D60 Red led Bus 0V
D61 Green led +VAUX2
D62 Green led - VAUX1
D63 Green led +VAUX1
D75 Green led Rail Bus Voltage + 195 Vdc
D76 Green led Rail Bus Voltage – 195 Vdc
SMD00651 LED MEANING
D9
D75, D76
K20
D60
D61
D62
D9 Green led VAUX +15 Vdc
D63
D60 Red led Bus 0V
D61 Green led +VAUX2
D62 Green led - VAUX1
D63 Green led +VAUX1
D75 Green led Rail Bus Voltage + 225 Vdc
D76 Green led Rail Bus Voltage – 225 Vdc
K Series Rail Voltage
OUTPUT
V RAIL
TYPE MODEL V RAIL CURRENT
OVERVOLTAGE
PEAK
K – Series’ Composition
NEW ALIN OLD ALIN AMIN OLD OLD ACTUAL K AESOP FRONT DRIVER
MODEL K ALSU DSP BOARD RES BOARD FIRMWARE
(Power supply) (Power supply) (Amplifier) K CTRL 14 K CTRL 15 CTRL 16 BOARD BOARD BOARD
POWERSOFT K2, K3 SMD00880.R SMD00611 SMD00565.R SM000548 SM000741.R SM000640.R SM000579.R SMC00635B SM000291.R SM000526.R 5.3.11
5.3.11
POWERSOFT DUECANALI SMD00880.R SMD00611 SMD00581.R SM000741.R SM000640.R SM000579.R SMC00636B SM000291.R SM000526.R (Special
version)
POWERSOFT K6, K8, K10 SMD00642.R SMD00453 SM000404.R SMD00528.R SM000471 SM000546 SM000717.R SM000640.R SM000579.R SMC00635B SM000291.R SM000289.R 5.3.11
POWERSOFT K20 SMD00651.R SMD00423 SM000404.R SMD00559.R SM000481 SM000547 SM000740.R SM000640.R SM000579.R SMC00635B SM000291.R SM000289.R 5.3.11
K Series
K FRONT
BOARD
SMC00635B
At amp.’ the start-up, the K- Front firmware checks if the DSP and/or AESOP board is
installed on the amplifier.
DISPLAY
KT000888.R
In case it’ required to replace the SMC00635B, it’s mandatory to inform Powersoft about of the model, and serial number of the faulty unit before to ship the
replacement board; without this two information, it’s possible to replace just the display.
K Series – Duecanali
ERROR CODES
K Series – DUECANALI
Error’ Code Error’ Description
1 192KHz clock is not present
5 Positive 5V analog
(Check rail fuses Check rail fuses Ch1 and Ch2) From FW ver. 5.3.11 the message has been changed with Call
Check rail fuses service centre
The error code value displayed in the main screen is the sum of the single error code values. An “error” occurs when the following voltage values
or power conditions fall outside normal ranges.
The firmware card is used to update the K Series and/or Duecanali with the latest version of firmware released
from Powersoft officially.
The latest version of the firmware is available to download on the Powersoft web site.
It recommended all the times that has replaced the K-CTRL or/and DSP board.
After you have upgraded the firmware please follow the procedure for adjusting Offset output current expalined in
the service manual or the procedure powersoft_ KseriesCTRLBoard_servnote.
The amplifier power supply board replcament does not require any firmware updated
The procedure to updated the K-Series, with the firmware card is described on K - Series service manual.
OUTLINE T Eleven
OUTLINE M SERIES
APG SA20:2
K Series – Duecanali
KIT KAESOP
KIT KAESOP
KAESOP plug-in board provides Powersoft K Series amplifiers with a proprietary AESOP (AES Ethernet
Simple Open Protocol) network dedicated to live applications where high quality audio, easy system
configuration and reliability must be guaranteed.
Required for manageing the amp by Armonia Pro Audio suite remotely.
KIT OP000001 TWO FRONT PLUGS FOR K STD - HGT (K6 - K8 - K10 - K20)
FRONT PLUGs
FRONT PLUGs
KIT AESOP K LGT 4 PORT
Service Code
Rev. B 09/03/2017 POWERSOFT MARTIN AUDIO OUTLINE VOID APG MSI LEMUSE K&HUMMEL CLAIR BROS
Service Menu Code 766071 717660 716076 701075 526984 766071 241174 170667 607671
Key unlock code 270156 270156 270156 270156 270156 270156 270156 270156 100000
Preset slot unlock code 081268 081268 081268 081268 081268 081268 081268 081268 081268
Warning
All the times that you replace the power supply board or K-CTRL board must be adjusted the input mains
voltage from the service menu. (VMains Low and VMains High)
To access at the service menu is required the password based of the brand
X4 & X8 SERIES
X Series
MANDATORY
X Series Mains connection
MANDATORY
X4 Series
CH1 CH4
CH2 CH3
POWER ON - PSU
X Series LED Illuminated buttons
RING COLOUR
CENTER COLOUR
CHANNELS
White
Input channel presence
blinking
RING COLOR
Red Input channel clipping
Input channel presence
X Series – LED Illuminated buttons meaning
ADLINK BOARD
PSU Board
SMD01007.R
X Series
DIGI BOARD
PSU Board
SMD01007.R
X4 Series
AMP Module
SMD01006.R
PSU Module
SMD01009.R
X4 Series
MAINS FUSES
FU000057
X4 Series
VARISTOR BOARD
SM001011.R
X8 Series
USB port
Push button x WiFi Push button X Armonia
On / OFF switch CH8 callback
CH1
CH2 CH7
CH3 CH6
CH4 CH5
POWER ON - PSU
X8 Series
AMP Module
SMD01005.R
PSU Module
SMD01037.R
X8 Series
PSU Module
SMD01037.R
MAINS FUSES
FU000059
X8 Series
PSU Module
SMD01037.R
D & Q SERIES
(discontinued products)
MAINS PLUG
D Series layout SM000117
AMP
BOARD
SMD00367
P.S. BOARD
D1602 SMD00288
MAINS PLUG
SM000117
D2002 ALSU
BOARD
SM000405
FRONT BOARD
SM000178
Q Series layout MAINS PLUG
SM000117
AMP BOARD
SMD00367
P.S. BOARD
Q3002 SMD00288
MAINS PLUG
SM000117
Q3204
ALSU BOARD
Q4002 SM000405
REMOTE BOARD
Q4004 SM000113
CTRL BOARD
SM000321
FRONT BOARD
SM000163
D&Q Series boards
Programming chip
D&Q Series Boards
MAIN BOARD
M20D
SMD00755.R
MAIN BOARD
M30D
M14D SMD00756.R
CTRL PLUS BOARD
M14D SM000687.R
FRONT BOARD
SM000733.R
FRONT BOARD
SM000735.R
For Martin Audio
M Series layout
MAIN BOARD
M28Q SMD00757.R
MAIN BOARD
M50Q SMD00751.R
M28Q
M50Q CTRL PLUS BOARD
M28Q SM000687.R
FRONT BOARD
SM000733.R
FRONT BOARD
SM000735.R
For Martin Audio
M Series layout
REMPLUG
SM000737.R
MAIN BOARD
M14D
SMD00754.R
MAIN BOARD
M20D
SMD00755.R
M14D HDSP ETH MAIN BOARD
M30D
SMD00756.R
M20D HDSP ETH
M30D HDSP ETH HDSP BOARD
SM000810.R
REMMAIN BOARD
SM000736.R
FRONT BOARD
SM000733.R
FRONT BOARD
SM000735.R
For Martin Audio
M Series layout REMPLUG
SM000737.R
REMMAIN BOARD
SM000736.R
MAIN BOARD
M28Q
SMD00757.R
MAIN BOARD
M50Q
M28Q HDSP ETH SMD00751.R
HDSP BOARD
M50Q HDSP ETH SM000810.R
FRONT BOARD
SM000733.R
FRONT BOARD
SM000735.R
For Martin Audio
M Series Led meaning
MAIN BOARD
SM000801.R
JUMPTRANSFER
BOARD
SM000789.R
Ottocanali
Ottocanali DSP DSP BOARD
SM000806.R
ANALOG BOARD
SM000785.R
FRONT BOARD
SM000787.R
Ottocanali layout
Ottocanali DSP
In every DSP board has installed firmware Vers. 1.2.0 with flat preset but is required an initialization procedure
to become full compliant with Armonia application software.
Every service centre should provide to Powersoft the serial number of the fault unit for processing this
initialization of replacement DSp board.
This procedure can be proceed in Powersoft only
Labels meaning on Amps.
Every single amp or module is identified with own serial number that Powersoft has assigned
during the manufacturing process.
The serial number is essential information for recovering the history of the amp / module and should be always
mentioned every time for RMA request, warranty status, technical matter.
MODEL
MODEL
MODEL
SERIAL NUMBER
SERIAL NUMBER
PART NUMBER
PART NUMBER
MANUFACTURED DATE WEEK/YEAR
MANUFACTURED DATE WEEK/YEAR
Labels meaning on the boards
Every single board is identified with own serial number that Powersoft has assigned during the manufacturing process.
The serial number is essential information for recovering the history of the board and should be always mentioned in
the monthly service report or in the temporary exportation documents.
K - SERIES BOARD SERIAL NUMBER M - SERIES BOARD SERIAL NUMBER Q & D BOARD SERIAL NUMBER
Some examples:
• PFXXXXXX (FINAL PRODUCT)
• SMXXXXXX (PARTIAL PARTS such as BOARD)
• CAXXXXXX (CAPACITORS)
• DIXXXXXX (DIODES)
• FUXXXXXX (FUSE)
• IGXXXXXX (IGBT)
• MOXXXXXX (MOSFET)
• ISXXXXXXX (SILPAD)
• REXXXXXX (RESISTOR)
• RESXXXXX (SMD RESISTOR)
• VRXXXXXX (VARISTOR)
• VNXXXXXX (FAN)
Thank you for your attention!