Professional Documents
Culture Documents
QCP-PZ-18, Rev 2 BINDER
QCP-PZ-18, Rev 2 BINDER
FRESH MIXTURE
rest on sieve
0.63mm:
for small sand: 10-30 %
Particle size distribution
for average sand: 30-45 %
SM STB 1/10 days (accepted
for large sand: 45-65 %
1033:2008; stock-pile)
Grain index GOST 8735- ≥ 1.5
SNiP 3.06.03-
88 Laboratory Test
Sand 85; Laboratory
Dust and clay particles content max 10 % Reports
GOST 8736-93
Clay in lumps content max 2 %
Bulk density 1/1 month -
True density (pyknometer
1/year -
method)
Compressive strength of the SM STB GOST 8269.0-
For source approval min 60 MPa
rock 1033:2008 97
Aggregates Particle size distribution: Laboratory Laboratory Test
Rest on sieve (%): Reports
5 mm = 90÷100;
GOST 8267-93 GOST 8269.0- 1/10 days(accepted 7.5 mm = 30÷60;
Fraction 5-10 mm
SNiP 3.06.03-85 97 stock-pile) 10 mm = max 10;
12.5 mm = max 0.5
Rest on sieve (%):
10 mm = 90÷100;
GOST 8267-93 GOST 8269.0- 1/10 days(accepted 15 mm = 30÷60;
Fraction 10-20 mm
SNiP 3.06.03-85 97 stock-pile) 20 mm = max 10;
25 mm = max 0.5
Fraction 20-40 mm GOST 8267-93 GOST 8269.0- 1/10 days(accepted Rest on sieve (%):
QUALITY CONTROL PLAN
ASPHALT MIXTURE Code: QCP-PZ-18
Ed.1 / Rev. 2
IMPRESA PIZZAROTTI &C SpA BINDER COURSE type SKBg II / 2,5 Page 2 of 5
Rehabilitation of R 16 Balti – Falesti - Sculeni Road
Contract RSPSP/W6/03 Section km 4 + 800 - km 30 + 270
Contract RSPSP/W6/04 Section km 30 + 270 km - km 59 + 480
TS, Standards, Norms
Recommended Form code
Type of checking Checked parameter/ Activity Limits Responsible Quality Records
requirements methods frequency for accepted
works
20 mm = 90÷100;
30 mm = 30÷60;
SNiP 3.06.03-85 97 stock-pile)
40 mm = max 10;
50 mm = max 0.5
Dust and clay particles content max 1 %
1/10 days(accepted
Clay in lumps content GOST 8267-93 GOST 8269.0- max 0.25
stock-pile)
SNiP 3.06.03-85 97
Content of soft particle max 10 %
Shape coefficient max 25%
Mark by crushing GOST 8267-93 1/1 month ≥ 800
GOST 8269.0-
SNiP 3.06.03-85
Bulk density 97 1/1 month -
Resistance by freezing and
GOST 8267-93 GOST 8269.0- 1/6 month F50
thawing
SNiP 3.06.03-85 97
Resistance to fragmentation for source approval mark И II
Moisture content <1%
passing through:
GOST 16557-78 Laboratory Test
GOST 12784-78 1/10 days 1.25mm: 100% Laboratory
Particle size distribution SNiP 3.06.03-85 Reports
0.315mm: min 90%
0.071mm: min 70%
Filler
Porosity GOST 16557 max 35 % by
GOST 12784-78
for source approval volume
Bitumen absorption: GOST 16557 Laboratory Test
GOST 12784-78 max 65 g Laboratory
Reports
The swelling of samples from a GOST 16557 max 2.5 % by
GOST 12784-78 1/6 month
mixture of powder with bitumen volume
Bitumen Penetration at GOST 22245-90 GOST 11501-78 One test/delivery day 61-90 (0,1mm) Laboratory Laboratory Test
25oC Snip 3.06.03-85 min 20 Reports
TS 305.17
QUALITY CONTROL PLAN
ASPHALT MIXTURE Code: QCP-PZ-18
Ed.1 / Rev. 2
IMPRESA PIZZAROTTI &C SpA BINDER COURSE type SKBg II / 2,5 Page 3 of 5
Rehabilitation of R 16 Balti – Falesti - Sculeni Road
Contract RSPSP/W6/03 Section km 4 + 800 - km 30 + 270
Contract RSPSP/W6/04 Section km 30 + 270 km - km 59 + 480
TS, Standards, Norms
Recommended Form code
Type of checking Checked parameter/ Activity Limits Responsible Quality Records
requirements methods frequency for accepted
works
0 oC
Penetration index GOST 22245-90 from -1 to +1
Softening point (ring and ball
GOST 11506-73 ≥47 oC
method)
Ductility at
25oC min 55
GOST 22245-90 GOST 11505
min 3.5
0 oC
Fraas point, oC GOST 22245-90 GOST 11507 max -15 Laboratory Test
1/6 month Laboratory
Reports
Inflamability point, C
o
GOST 22245-90 GOST 4333 min 230
Softening point after heating, C o
GOST 22245-90 GOST 11505-75 max 5
DIN EN 13702- according to EN
Dynamic viscosity EN 12591:2009
1 12591:2009
+/-2% aggregate >
15 mm
+/-1% aggregate >
5 mm
At the start of the +/-0.5% aggregate
Asphalt plant Check the asphalt plant Asphalt plant asphalt plant Asphalt plant
TS 305.04 works and when is < 5 mm
calibration calibration specifications operator register
neccessary Filler Scales +/-
0.5%
Bituminous
material +/-0.1%
Fresh bituminous Bitumen temperature-entering Asphalt plant permanently by asphalt plant Asphalt plant
SNiP 3.06.03-85 130÷150oC
mixture control the mixer specifications asphalt plant operator operator register
QUALITY CONTROL PLAN
ASPHALT MIXTURE Code: QCP-PZ-18
Ed.1 / Rev. 2
IMPRESA PIZZAROTTI &C SpA BINDER COURSE type SKBg II / 2,5 Page 4 of 5
Rehabilitation of R 16 Balti – Falesti - Sculeni Road
Contract RSPSP/W6/03 Section km 4 + 800 - km 30 + 270
Contract RSPSP/W6/04 Section km 30 + 270 km - km 59 + 480
TS, Standards, Norms
Recommended Form code
Type of checking Checked parameter/ Activity Limits Responsible Quality Records
requirements methods frequency for accepted
works
Mineral materials temperature at Asphalt plant permanently by asphalt plant Asphalt plant
SNiP 3.06.03-85 165÷185oC
outlet of rotary drier specifications asphalt plant operator operator register
SM STB
Asphalt mixtures temperature Asphalt plant asphalt plant Asphalt plant
1033:2008 1/800 t 140÷160 oC
leaving the asphalt plant specifications operator register
SNiP 3.06.03-86
± 0.3 % related the
approved mix
Bitumen content design for binder
course and
regulating asphalt.
Tolerance from mix
design:
particle size distribution TS 305.08 SM STB Fr.15÷40 mm: +/- 5 % Laboratory Test
Laboratory
STB 1033:2008 1115:2008 fr. 5÷15 mm: +/- 3 % Reports
fr. 0÷ 5 mm +/- 2 %