Professional Documents
Culture Documents
Final DG Set 1500KVA X 2 Set 24062022
Final DG Set 1500KVA X 2 Set 24062022
SUPPLY INSTALLATION
JAKSON
S.No. DESCRIPTION UNIT QTY VISAKHAPATNAM,Mobile:
RATE AMOUNT RATE AMOUNT
Supply, Installation & Commissioning of 1500KVA @ 0.8PF DG Set, Outdoor Type, 8790100555 ,Mr.KYLN Murthy
with prime duty diesel engine, radiator cooled, alternator, Prime Rating, 415V, 50HZ
A Set 2 2
@ 1500RPM, Complete with all fitting accessories as
A1.0 MAKE & MODEL KTA-50-G8I
required
A1.1 RATING KVA 1500
A1.2 OUPUT VOLTAGE & FREQUENCY 415 V, 50 HZ
A1.3 POWER FACTOR 0.8 LEG
A1.4 NO OF PHASE 3 PHASE
B Supply,
BOM Unloading, Shifting, Installation & commissioning, Testing (FAT) of free
1 standing, floor Mounting,Synchronization cum AMF Panel [As per Set 1 1
Supply of Isolator panel mounted on top of alternator with 2500A TPN MF ACB
2 SLD No. GCPL-767-LV-SLD-04] Set 1 1
with copper flexibles and rubber bellow Breaker Make: L&T
3 Supply of Acoustic enclosure suitable for 1500KVA DG set Set 1 1
4 Transportation of DG set upto site Job 1 1
EXHAUST SYSTEM
Supply of exhaust piping of following sizes MS B Class exhaust pipes conforming to IS:3589 with welding joint including bends,
4 clamps, dash fastener, flanges, nuts, bolts etc. complete as required and as per specifications detailed below. (Make -
Jindal/Surya/Tata)
4.01 Dia 10" / 250mm, MS ERW B Class Pipe. Shall be duly cleaned with Wire Brush and Coated Mtrs 12 12 (6 mtr each for Y joint)
Exhaust pipeofThermal
with 1 coat Primer &Insulation
2 coats ofand cladding
Heat for Paint
Resistant 10"dia pipe, using Rockwool Insulation of
4.02 density
Dia 16" 64Kg/m3
/ 400mm withor 14"50mm
350mm, thickMSbound
ERW with GI chicken
B Class Pipe. Shallwire
bemesh & Cladding
duly cleaned withusing
Wire24 Mtrs 12 12
4.03 SWG
Brush Aluminium
and Coated sheet
with 1 coat of Primer & 2 coats of Heat Resistant Paint - Bends
Exhaust pipe Thermal Insulation and cladding for 14"dia pipe, using Rockwool Insulation of shall be Mtrs 36 36 (14inch)
4.04 measured
density and billed
64Kg/m3 withfor 2 Times
50mm of bound
thick Straight Length
with GI chicken wire mesh & Cladding using 24 Mtrs 36 36
SWG
SupplyAluminium
& sheet
Installation of- Bends
Silencer shall be measured and billed for 2 Times of Straight
Thermal Insulation and cladding of Silencers, using Rockwool Insulation of density 64Kg/m3 Length Set 4
with 50mm thick bound with GI chicken wire mesh & Cladding using 24 SWG Aluminium Set 4
sheet
16" /14 " SS Flexible Bellows with Table D Flanges, Gaskets and Hardwares Nos 2
10" SS
M.S Flexible Supports
Structural Bellows with Table D Stack
for Exhaust Flanges, Gaskets
using and Hardwares
ISA / ISMC. Nos 4
Supports shall be Duly Cleaned with Brush follwed by One Coat of Primer and Two Coats of Tons 12
Synthetic Enamel Paint
Lightning Arrestor / Aluminium
- Convetional Paint
- Spike and Sphere Type Nos 1
6 25 x 3 CU Strip for LA earthing with insulators
CU Earth pit for Lightening Arrestor earthing Mtrs 50
7 (600x600x3.15mm Cu Plate, 3 Mtrs of Dia 40 mm GI B Class Pipe, 2 Runs of 25x3 Cu strip & Nos 1
8 Funnel arrangement)
Aviation Lamp - LED Type Nos 1
Page 1 of
9 3C x 2.5 sq.mm 1.1 KV XLPE, Cu.Ar.Multistrand Cable Mtrs 100
10 End Termination
Dia 2" / 50mm, MS forERW
the above
B ClassCable
Pipe for Crank Case Breather. Pipes shall be duly cleaned Nos 2
11 with Wire Brush and Coated with 1 coat of Primer & 2 coats of Syntehtic Enamel Paint. Mtrs 10
Collection
FUEL SYSTEMPit - Existing
Supply and Installation of MS Class C Pipe 25 mm ID with Bends, flanges packing
12.1 Mtrs. 12 25
as required. (Considering DG set to be placed at a distance of9-10 mtr)
12.2 Supply and fixing of set of Fuel Pipe fittings like valves, tee, elbows etc. Lot 1 1
CONTROL CABLES
21.1 Supply & laying of Power & Control Cables
a 24 C x 2.5 Sqmm CU armoured Control Cable. Mtrs 60
b 4C x 2.5 Sqmm CU armoured Control Cable. Mtrs 60
c 2C x 2.5 Sqmm CU armoured Control Cable. Mtrs 60
d 2C x 4 Sqmm CU armoured Control Cable. Mtrs 60
e 3C x 6 sqmm (Shielded Cable) Mtrs 60
f 24 C x .75 sqmm (Shielded Cable) Mtrs 60
8cx.75 Sqmm ( Shielded cable) mtrs 60
21.2 Providing & Fixing of Cables End Termination for following size of cables.
a 24 C x 2.5 Sqmm CU armoured Control Cable. Nos 2
b 4C x 2.5 Sqmm CU armoured Control Cable. Nos 2
c 2C x 2.5 Sqmm CU armoured Control Cable. Nos 4
d 2C x 4 Sqmm CU armoured Control Cable. Nos 2
e 3 C x 6 sqmm (Shielded Cable) Nos 2
f 24 C x .75 sqmm (Shielded Cable) Nos 0
8cx.75 Sqmm ( Shielded cable) Nos 2
22 MS perforated cable trays:
600 mm wide, 75 mm deep, 2 mm thick perforated cable tray Mtrs 25
Earthing with Copper earth plate 600mm x 600mm x 3mm thick including
23 EARTHING
accessories and providing masonary enclosure with cover plate having locking
23.1 Earthing with GI earth plate 600mm x 600mm x 6mm thick including accessories No. 2
arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt
23.2 and providing masonary enclosure with cover plate having locking arrangement No. 2
Supply, Installation, of following bare strips including all necessary fixing
as required.
23.3 and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required.
accessories and effecting connections as per specifications.
a Cu flat size 50 x 6mm Mtrs. 25
b GI MS flat size 50 x 6 mm Mtrs.
b GI MS flat size 25 x 6 mm Mtrs. 25
11 STATUTORY APPROVALS
Liasoning Charges towards Obtaining CEIG/ CEA approvals, Official Fees Payable to
11.01 Department to be bourne by Customer at Actuals Job 1 Colorshine scope
11.02 PCB approvals Job 1 Colorshine scope
12 Consumable list with Price for one year
Page 2 of
1500 KVA DG SET COMPARISON SHEET
A Supply of 1500 KVA OPEN DG Set make alternator mounted on a common base frame, complete with: Set
5 EXHAUST SYSTEM
6 FUEL SYSTEM
7 CONTROL CABLES
8 Supply & laying of Power & Control Cables
9 Providing & Fixing of Cables End Termination for following size of cables.
10 MS perforated cable trays:
11 EARTHING
12 STATUTORY APPROVALS
Liasoning Charges towards Obtaining CEIG/ CEA approvals, Official Fees Payable to Department to be bourne by
12.01
Customer at Actuals
Job 1
12.02 PCB approvals Job 1
13 Just in time for Services Hrs
14 Delivery time at site week
Total Score
17 Technical Rating
PROJECT : Comparison_Scope
PACKAGE : 2 x 1500kVA, 415V DG SETS Matrix
13 Any other works, Not specified in but required to successful commissioning of DG set ü
14 Contact Detail