Professional Documents
Culture Documents
O Parabola: o o o o
O Parabola: o o o o
7. The center of a circle that is inscribed in the triangle coincides with which of the following points
associated with triangle?
o Circumcenter
o Incenter
o Centroid
o Apothem
8. A description of the arrangement of atoms or ions in a material is called_______.
o Structure
o Composition
o Mixture
o Component
9. What refers to a slender member which prevents part of a structure moving to each other under
compressive force?
o Arch
o Strut
o Tie
o Column
10. What refers to the point in which the bending moment changes sign through a zero value?
o Point of contra flexure
o Point of zero stress
o Point of inflection
o Critical point
11. What are the four basic forms of deformation of solid bodies.
o Tension, compression, plastic, and elastic
o Tension, compression, bending and twisting
o Tension, compression, elongation, and torsion
o Tension, compression, elongation and bending
12. Within elastic limit, the volumetric strain is proportional to the hydrostatic stress. What is the
constant that relates these two quantities called____?
o Modulus of rigidity
o Bulk modulus
o Young’s modulus
o Modulus of elasticity
13. What is the ratio of the transverse strain to the corresponding axial strain in a body subjected to
uniaxial stress?
o Poisson’s ratio
o Dielectric index
o Refractive index
o Euler’s ratio
14. What does the processor first look at when booting up a PC?
o Motherboard
o Hard drive
o BIOS
o RAM
15. Convert the binary number 10101 to decimal number
o 1
o 25
o 18
o 29
16. What is the MAXIMUM distance from the flooring to the receptacle outlet in dwelling unit in
mm?
o 1500
o 2800
o 1800
o 2500
17. A continuous electrical load is one where the maximum current is expected to continue for a
minimum duration of time. What is this minimum duration of time?
o 4 hours
o 2 hours
o 3 hours
o 1 hours
18. Which of these modes requires the least amount of time to boot up in order to retrieve the
previous computing previous session?
o Shutdown
o Standby
o Hibernate
o Restart
19. A technician has installed a new video card and the computer will now only boot into VGA
mode. Which of the following may be the cause of the problem?
o The incorrect drivers are installed
o There is an operating system incompatibility
o The new card is not DVI compatible
o The external monitor is not compatible
20. Which of the following is not a programming language?
o COBOL
o FORTRAN
o PASCAL
o LOTUS
21. Engineering thermodynamics does not include energy
o Transfer
o Storage
o Utilization
o Transformation
22. What law asserts that energy has quality as well as quantity?
o Zeroth law of thermodynamics
o Third law of thermodynamics
o Second law of thermodynamics
o First law of thermodynamics
23. A leak from a faucet comes out in separate drops. Which of the following is the main cause of
this phenomenon?
o Viscosity of the fluid
o Air resistance
o Surface tension
o Gravity
24. An opening provided in the side of a tank or vessel such that the liquid surface in the tank is
below the top edge of the opening
o Orifice
o Notch
o Mouthpiece
o Weirs
25. Which of the following processes or systems does not involve heat?
o Thermal process
o Isothermal process
o Adiabatic process
o Steady process
26. The sum of the strains in the three-coordinate direction is known as ____.
o Dilution
o Dilation
o Position
o Solution
27. Is software that translates a program written in a high-level language into low-level instructions
before the program is executed?
o Assembler
o Interpreter
o Debugger
o Compiler
28. What refers to the computer’s use of hard disk storage to stimulate RAM?
o Volatile memory
o ROM
o Virtual memory
o Cache memory
29. What is the meaning of WESM?
o World Electricity Saving Market
o Wholesale Electricity Spot Market
o Wholesale Energy Saving Market
o World Energy Spot Market
30. Who is the board of trustee or board member of TRANSCO?
o President of TRANSCO
o President of DOE
o President of DENR
o Department of Finance
31. The minimum size of copper equipment grounding conductor is?
o 2.0 mm2
o 8.0 mm2
o 5.5 mm2
o 3.5 mm2
32. It is defined as the ratio of the RMS value of the harmonic content to the RMS value of the
fundamental quantity, expressed in percent?
o Voltage variation
o Frequency variation
o Total Demand Distortion (TDD)
o Total Harmonic Distortion (THD)
33. In the Philippines Distribution Code Purpose. Which of the following does NOT belong?
o To specify standards for the protection of personnel in the work environment
o To specify customers services for the protection of end users
o To ensure distribution system will be operated by only one distribution company
o To specify standards for the protection of personnel in the work environment
34. What is otherwise known as “PRC Modernization Law”?
o RA8819
o RA8981
o RA7981
o RA7819
35. What size of conductor shall be connected between the ground grid and all metal parts of
swimming pools?
o 14 mm2
o 5.5 mm2
o 8.0 mm2
o 22 mm2
36. Who shall be executive officer of the board of Electrical Engineering and shall also conduct the
examination given by the Board, as provided in Article ll, Sec.9 of R.A.7920?
o Chairman of the board of EE
o The commissioner of the PRC
o The president of the Philippines
o A member of the Board of EE
37. Which of the following clauses is NOT included in Article VI, final provisions of R.A.7920?
o Repealing
o Penalty
o Effectivity
o Separability
38. Which of the following electromagnetic waves has the maximum frequency?
o Gamma rays
o Beta rays
o Alpha rays
o Infrared
39. What does “DCTL” means?
o Diode Capacitor Transistorized Logic
o Diode Coupled Transistor Logic
o Direct Connected Transistor Logic
o Direct Coupled Transistor Logic
40. If the heat of the solution is negative, heat is given off when the solute dissolves in the solvent,
what type of reaction is this?
o Exothermic
o Endothermic
o Ideal
o Efflorescent
41. An essential part of a large dam and provides an efficient and safe means of releasing flow water
that exceeds the design capacity of the reservoir
o Weir
o Standpipe
o Culverts
o Spillway
42. All switches and circuit breakers used as switches shall be installed that the center of the grip of
the operating handle when in its highest position shall NOT be more than _____mm above the
floor or working platform
o 1,200
o 1,500
o 2,000
o 2,200
43. Find the gray code of the four digit 2
o 1010
o 1100
o 0011
o 1111
44. What prefix refers to 10 to the negative 18 th power?
o femto
o exa
o atto
o pico
45. What is the absolute value of the ratio of the transverse strain to the corresponding axial strain
in a body subjected to uniaxial stress?
o Euler’s ratio
o Poisson’s ratio
o Polarization index
o Dielectric index
46. Which of the following values characterize the state of the system?
o Property
o Cycle
o Process
o Entropy Change
47. What is the strong bond between hydrogen atoms known as?
o The metallic bond
o The covalent bond
o The ionic bond
o Ionic and metallic bonds
48. Article lll of Code of Ethics for Electrical Engineers contains:
o SEC. 1 to 6
o SEC. 1 to 5
o SEC. 1 to 8
o SEC. 1 to 7
49. How many atoms are there per unit cell for a face-centered cubic structure?
o 1
o 3
o 4
o 2
50. The overall energy program formulated and updated yearly by the DOE and submitted to
Congress pursuant to R.A 7638
o Preliminary Project Planning Data (PPPD)
o Philippine Electrical Code (PEC)
o Philippine Energy Plan (PEP)
o Power Development Program (PDP)
51. The electric power industry is divided into how many sectors?
o 6
o 3
o 5
o 4
52. RA 7920 contains how many sections all in all?
o 40
o 41
o 45
o 43
53. The most important element that controls the physical properties of steel is
o Silicon
o Manganese
o Carbon
o Tungsten
54. A voltage level exceeding one (1) kV up to 34.5 kV is:
o Extra High Voltage
o Low Voltage
o High Voltage
o Medium Voltage
55. Article lll of Code of Ethics for Electrical Engineers contains:
o SEC. 1 to 6
o SEC. 1 to 7
o SEC. 1 to 8
o SEC. 1 to 5
56. Varignon’s theorem is used to determine the _____.
o Mass moment of inertia
o Moment of inertia
o Location of centroid
o Moment of area
57. What is R.A 9136 stand for?
o Electric Power Industry Reform Act of 2001
o Electrification Power Reform Act of 2001
o Energized Power Reform Act of 2001
o Energy Power Reform Act of 2001
58. Which of the following computer program is NOT considered open-source software?
o Microsoft Office
o OpenOffice.org
o Firefox
o Linux