In order to cut the cells in a solar panel, knowing its
components is crucial! PV solar cells are typically made by imprinting a crystalline structure of silicon onto a conductive wafer. They must be made in a precise orientation to achieve this accurate alignment. In general, the PV cell is set in a frame that is tilted at an angle of about thirty-five degrees. This tilt enables the PV cell to absorb the maximum amount of solar radiation. In addition, the wafer must be made with an orientation that ensures that the crystalline structure is able to absorb the maximum amount of sunlight for maximum conversion to electricity.
Silicon crystalline properties
Conclusion : The solar panel will always break diagonally, that is due to the silicon crystal structure which is oriented with a 35-45°.