Professional Documents
Culture Documents
Name Roll No Department Year/Semester Batch Name of The Skill
Name Roll No Department Year/Semester Batch Name of The Skill
Name Roll No Department Year/Semester Batch Name of The Skill
Student Photo
Name :
Roll No :
Department :
Year/Semester :
Batch :
Name of the Skill :
1
Day Brief Description of Every Marks
day Task Obtained
Introduction to Active and Passive components and Implementation of
FN the circuit using active and passive components
1
AN Applying clipper, clamper, filter circuit, and power supply design
concept in the circuit development
Introduction to Arduino with basic examples using
FN Integrated Development Environment and hardware
2
AN Interfacing Liquid crystal display with Arduino
FN TEST PROJECT
5
AN
Overall Performance Graph of Tasks:
Performance Graph
2
PROCESS PLAN FOR TASK-
1 FN
Proposed Process Plan Actual Plan Executed
3
Reflection Sheet for Task – 1 FN
Status Legend :
4
Daily Task Details
Day: Name of the Task:
Brief description
about the task
2. J Identification of 0 – Others - 1
Capacitor value 1- 100µF, 10µF
4. J Identification of IC 0 – Others - 1
555 terminal – 0.5 – Any two
Control, trigger, 1 – For all
discharge, output
5
6. J Ground Connection 0-Others - 1
1 - Properly Grounded
10
Total Marks
6
PROCESS PLAN FOR TASK-
1 AN
Proposed Process Plan Actual Plan Executed
7
Reflection Sheet for Task – 1 AN
Status Legend :
8
Daily Task Details
Day: Name of the Task:
Brief description
about the task
2. J Identification of 0 - Others - 1
Capacitor value 1- 100µF, 10µF
4. J Identification of IC 0 – Others - 1
555 terminal – 0.5 – Any
Control, trigger, two 1 – For
discharge, output all
9
6. J Ground Connection 0-Others - 1
1 - Properly Grounded
10
Total Marks
1
PROCESS PLAN FOR TASK-
2 FN
Proposed Process Plan Actual Plan Executed
2
Reflection Sheet for Task – 2 FN
Status Legend :
2
Daily Task Details
Day: Name of the Task:
Brief description
about the task
Identification of
1 – Completed
0- Non Properly
5. J Circuit Wiring stripped - 1
1- Properly Stripped
0-Others
6. J Ground Connection - 1
1 - Properly Grounded
Power Supply 0- Others
7. J - 1
Connection 1 -Proper supply
0- Poor
Arrangement of the
8. M 0.5- Partially good - 1
component
1- Good
0- Others
1 – Completed
0- No output
10. J Output - 1
1- Obtained output
Total Marks 10
PROCESS PLAN FOR TASK-
2 AN
Proposed Process Plan Actual Plan Executed
Status Legend :
2
Daily Task Details
Day: Name of the Task:
Brief description
about the task
Identification of
0- Others
required sensor –
1. M - 1
based on the color 1- Correct sensor
coding.
Identification of 0 - No
2. J - 1
pin description 1- Yes
Buzzer 0- Others
3. J - 1
connection 1- Properly connected
0 - Others
1 – Completed
0- Non Properly
5. J Circuit Wiring stripped - 1
1- Properly Stripped
0-Others
6. J Ground Connection - 1
1 - Properly Grounded
7. J Power Supply 0- Others - 1
2
Connection 1 -Proper supply
0- Poor
Arrangement of the
8. M 0.5- Partially good - 1
component
1- Good
0- Others
1 – Completed
0- No output
10. J Output - 1
1- Obtained output
Total Marks 10
3
PROCESS PLAN FOR TASK-
3 FN
Proposed Process Plan Actual Plan Executed
2
Reflection Sheet for Task – 3 FN
Status Legend :
2
Daily Task Details
Brief description
about the task
1- Yes
Including Basic Library 0- No
6. J - 1
Files 1- Yes
Programming
Functionality1: Functional logics are written
i)Writing the functional correctly
7. J logic to interface App - 1
0- No
ii) Include printf () to
display the output in 1- Yes
serial monitor
Programming
Functionality1: Coding Coding for interfacing input and
output modules are done
8. J to connect a motor - 1
correctly
,motor driver modules 0- No
with microcontroller 1- Yes
Total Marks 10
3
PROCESS PLAN FOR TASK-
3 AN
Proposed Process Plan Actual Plan Executed
3
Reflection Sheet for Task – 3 AN
Status Legend :
3
Daily Task Details
Day: Name of the Task:
Brief description
about the task
Aspect
Sl. Requirement Max.
Type Aspect of description Extra aspect of description
No. (only for M) marks
(M or
J)
Work place safety 0 – Don’t display all 3 aspects as
listed in i, ii, iii 0.33–
i) Clean-up workplace
demonstrated little of 3 aspects or
after use only one 0.66 – demonstrated the
ii) Respectful and do 3 aspects 1 – Strong
not cause disruption to demonstration of all 3 aspects
others 0 – Don’t display
1. J all 3 aspects as listed in - 1
i, ii, iii 0.33–
demonstrated little of 3
aspects or only one 0.66
– demonstrated the 3
aspects 1 – Strong
demonstration of all 3
aspects
3
iii)Inbuilt LED
pin
3
The library files are included
Including Basic Library for Ultrasonic sensor and
5. J - 1
Files Adafruit Motor Shield to drive
the motor 0- No
1- Yes
The library files are included
for Ultrasonic sensor and
Including Basic Library Adafruit Motor Shield to drive
6. J the motor - 1
Files
0- No
1- Yes
Programming
Functionality1: i)Writing
the functional logic to Functional logics are written
7. J interface App correctly - 1
0- No
ii) Include printf () to
1- Yes
display the output in
serial monitor
Total Marks 10
3
PROCESS PLAN FOR TASK-
4 FN
Proposed Process Plan Actual Plan Executed
3
Reflection Sheet for Task – 4 FN
Status Legend :
3
Daily Task Details
Day: Name of the Task:
Brief description
about the task
Aspect
Sl. Requirement Max.
Type Aspect of description Extra aspect of description
No. (only for M) marks
(M or
J)
Work place safety 0 – Don’t display all 3 aspects
as listed in i, ii, iii 0.33–
i) Clean-up demonstrated little of 3
workplace after use aspects or only one 0.66 –
ii) Respectful and do demonstrated the 3 aspects 1 –
not cause disruption to Strong demonstration of all 3
others 0 – Don’t aspects
1. J display all 3 aspects as - 1
listed in i, ii, iii 0.33–
demonstrated little of
3 aspects or only one
0.66 – demonstrated
the 3 aspects 1 –
Strong demonstration
of all 3 aspects
3
The library files are included
for Ultrasonic sensor and
Adafruit Motor Shield to
Including Basic drive the motor
5. J - 1
Library Files
0- No
1- Yes
1- Yes
Programming
Functionality1:
i)Writing the Functional logics are
functional logic written correctly
7. J to interface App - 1
0- No
ii) Include printf() to 1- Yes
display the output in
serial monitor
3
App
Total Marks 10
3
PROCESS PLAN FOR TASK-
4 AN
Proposed Process Plan Actual Plan Executed
3
Reflection Sheet for Task – 4 AN
Status Legend :
3
Daily Task Details
Brief description
about the task
1- Yes
Programming
Functionality1:
i)Writing the Functional logics are
functional logic written correctly
7. J to interface App - 1
0- No
ii) Include printf () 1- Yes
to display the output
in serial monitor
Total Marks 10
TEST PROJECT – 1
Aspect
Sl. Requirement Max.
Type Aspect of description Extra aspect of description
No. (only for M) marks
(M or
J)
Work place safety 0 – Don’t display all 3 aspects as
listed in i, ii, iii 0.33–
i) Clean-up workplace demonstrated little of 3 aspects or
after use only one 0.66 – demonstrated the
ii) Respectful and do not 3 aspects 1 – Strong
cause disruption to demonstration of all 3 aspects
pin
The library files are included
for Ultrasonic sensor and
Including Basic Library Adafruit Motor Shield to drive
5. J the motor - 1
Files
0- No
1- Yes
The library files are included
for Ultrasonic sensor and
Including Basic Library Adafruit Motor Shield to drive
6. J the motor - 1
Files
0- No
1- Yes
Programming
Functionality1: i)Writing
Functional logics are written
the functional logic to RF
correctly
Transmitter mdule,
7. J MPU6050 Sensor - 1
0- No
ii) Include printf () to 1- Yes
display the output in
serial monitor
Total Marks 10
Test Project -2
4
9. J Damage to tools by
No damage to tools personnel=0 - 1
No damage=1
10. J Tools should be
placed properly =1
Proper placing of tools - 1
Tools are not kept properly
in their place=0
11. J Components choice is
The choice of not relevant to the task=
0 Components choice is
components is relevant
somewhat relevant to the - 1
considering the task to
task=0.5
be done
Components choice is relevant
to the task=1
12. J No labelling of components=0
All components
Partial labelling=1 - 2
labelled correctly
Accurate labelling=2
13. J Proper components used=1
Usage/fixing of Partial usage of relevant
components=0.5 - 1
components
Inappropriate choice of
components=0
14. J Components are fixed
appropriately without any
No Loose connections loose connections=0.5 - 0.5
Components are fixed
with loose connections=0
15. J Damage to components
No damage
by personnel=0 - 0.5
to
No damage=0.5
components
16. J Appropriate cable rating
Rating of cables - 0.5
=0.5 Irrelevant cable
rating=0
17. J 0 – Don’t display all 3
Cable channels : aspects as listed in i, ii, iii
i)Securely fitted. 0.33 – demonstrated little of 3
ii) Joints and angles aspects or only one
- 1
are neat with no gaps. 0.66 – demonstrated the 3
iii) Secure with aspects
no movement 1 – Strong demonstration of all
3 aspects
18. J Rating of switches Proper switch
rating=0.5 Irrelevant - 0.5
according to the
rating of the switches=0
loads
19. J Appropriate MCBs
Rating of MCBs - 0.5
rating=0.5 Incorrect rating of
MCBs=0
4
20. J Proper choice of fuses=0.5
Rating of fuses - 0.5
Inappropriate choice of
fuses=0
4
21. J No burn out of fuses=
Burn out of fuses - 0.5
0.5 Burn out of fuses=0
22. J RYB differentiation
The colour code is as
is clear=0.5 - 0.5
per rule(RYB)
Differentiation is not clear=0
23. J Termination of Cables are terminated =1
- 1
the cables Cables are not terminated
=0
24. J Functioning of the Working of the switch 0.5
according to the -
switch
function=0.5 Malfunction of
the switch=0
25. J Socket fixed without loose 0.5
Functioning of the connections=0.5
-
socket Socket with loose
connections=0
26. J Functioning of the 0.5
Functioning of the
fuses without burn out -
fuses
= 0.5
Burn out of the fuses=0
27. J MCBs should function without
Functioning of the tripping=0.5 - 0.5
MCBs Response time of the
MCBs not proper=0
28. J No short circuit in 0.5
switches=0.5
Short circuit in
Short circuit occurs -
switches
in switches=0
4
34. J Connections from one point to
another should be
optimized=0.5
Connections from one
Connections are not - 0.5
point to another point
optimized=0.25
Connections are incorrect=0
5
Total marks 30