Professional Documents
Culture Documents
80V - 80W Dmos Audio Amplifier With Mute/St-By: Multipower BCD Technology
80V - 80W Dmos Audio Amplifier With Mute/St-By: Multipower BCD Technology
80V - 80W Dmos Audio Amplifier With Mute/St-By: Multipower BCD Technology
R3 22K
+Vs +PWVs
C2
R2 7 13
22µF
680Ω IN- 2
-
14 OUT
C1 470nF
IN+ 3
+ C5
R1 22K 22µF
6
IN+MUTE 4 BOOT-
STRAP R6
2.7Ω
R5 10K MUTE 10
VM MUTE THERMAL S/C
STBY 9 C10
VSTBY STBY SHUTDOWN PROTECTION
100nF
R4 22K
1 8 15
STBY-GND -Vs -PWVs
C3 10µF C4 10µF
C9 100nF C8 1000µF
D93AU011
-Vs
Note: The Boucherot cell R6, C10, normally not necessary for a stable operation it could
be needed in presence of particular load impedances at VS <±25V.
BLOCK DIAGRAM
2/13
TDA7295
THERMAL DATA
Symbol Description Value Unit
Rth j-case Thermal Resistance Junction-case Max 1.5 °C/W
3/13
TDA7295
Figure 2: P.C.B. and components layout of the circuit of figure 1. (1:1 scale)
Note:
The Stand-by and Mute functions can be referred either to GND or -VS.
On the P.C.B. is possible to set both the configuration through the jumper J1.
4/13
TDA7295
5/13
TDA7295
TYPICAL CHARACTERISTICS
(Application Circuit of fig 1 unless otherwise specified)
Figure 5: Output Power vs. Supply Voltage Figure 6: Distortion vs. Output Power
6/13
TDA7295
Figure 9: Quiescent Current vs. Supply Voltage Figure 10: Supply Voltage Rejection vs. Frequency
Figure 11: Mute Attenuation vs. Vpin10 Figure 12: St-by Attenuation vs. Vpin9
Figure 13: Power Dissipation vs. Output Power Figure 14: Power Dissipation vs. Output Power
7/13
TDA7295
8/13
TDA7295
+Vs
(V)
+35
-35
-Vs
VIN
(mV)
VST-BY
PIN #9 5V
(V)
VMUTE 5V
PIN #10
(V)
IP
(mA)
VOUT
(V)
OFF
ST-BY
PLAY ST-BY OFF
MUTE MUTE
D93AU013
9/13
TDA7295
+Vs
0.22µF 2200µF
7 13
6
3
Vi + 14 22µF
0.56µF 22K -
22K
1 2
4
680
ST-BY/MUTE 10
9 15 8
20K
22µF 22K
-Vs
1N4148 2200µF 0.22µF
9 15 8
10
10K 30K 22µF
6
3 22µF
+ 14
0.56µF 22K -
22K
1 2
4
7 13
680
D93AU015A
10/13
TDA7295
Figure 19: Frequency Response of the Bridge Figure 20: Distortion vs. Output Power
Application
11/13
TDA7295
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX. OUTLINE AND
A 5 0.197 MECHANICAL DATA
B 2.65 0.104
C 1.6 0.063
D 1 0.039
E 0.49 0.55 0.019 0.022
F 0.66 0.75 0.026 0.030
G 1.02 1.27 1.52 0.040 0.050 0.060
G1 17.53 17.78 18.03 0.690 0.700 0.710
H1 19.6 0.772
H2 20.2 0.795
L 21.9 22.2 22.5 0.862 0.874 0.886
L1 21.7 22.1 22.5 0.854 0.870 0.886
L2 17.65 18.1 0.695 0.713
L3 17.25 17.5 17.75 0.679 0.689 0.699
L4 10.3 10.7 10.9 0.406 0.421 0.429
L7 2.65 2.9 0.104 0.114
M 4.25 4.55 4.85 0.167 0.179 0.191
M1 4.63 5.08 5.53 0.182 0.200 0.218
S 1.9 2.6 0.075 0.102
S1 1.9 2.6 0.075 0.102 Multiwatt15 V
Dia1 3.65 3.85 0.144 0.152
12/13
TDA7295
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
13/13