Professional Documents
Culture Documents
Department of Industrial Technology I
Department of Industrial Technology I
Department of Industrial Technology I
A Narrative Report
Presented to the Faculty of the Department of Industrial Technology,
on the Industry Immersion Under Dual Department Training (DT) Program in
_____________________________________________
(NAME OF COMPANY AND ADDRESS)
Resume
DEPARTMENT OF INDUSTRIAL TECHNOLOGY iii
Certificate of Completion
(SCANNED)
DEPARTMENT OF INDUSTRIAL TECHNOLOGY iv
Acceptance Letter
(SCANNED)
DEPARTMENT OF INDUSTRIAL TECHNOLOGY v
Endorsement Letter
(SCANNED)
DEPARTMENT OF INDUSTRIAL TECHNOLOGY vi
ACKNOWLEDGEMENT
DEPARTMENT OF INDUSTRIAL TECHNOLOGY vii
Dedication
DEPARTMENT OF INDUSTRIAL TECHNOLOGY viii
Table of Contents
DEPARTMENT OF INDUSTRIAL TECHNOLOGY ix
III. To satisfactory Comply with the Industry Immersion Training Program, one must:
TRAINING AGREEMENT
This AGREEMENT entered into this 21ST day of JUNE between AURORA
ATENCIO born on DECEMBER 23, 2001 and residing at BRGY. DIMANAYAT, SAN
LUIS, AURORA and hereinafter referred to as the student Trainee being minor is
System agrees to apply himself diligently, safely and faithfully to work in the company
during the period of the training in conformity with the standard approved for the
aforementioned company and makes parts of this AGREEMENT, and under the
4. Any student trainee who fails to perform satisfactorily within any stages of
his training may be given, at the discretion of the company, a period of one
week within which to improve his/her performance. If within this period the
5. The student-trainee shall work the equivalent of eight (8) hours a day on
week day in the course of his/her training. Time spent in related theoretical
6. The company’s rule and regulation shall be observed as part of the terms and
THAT, the student-trainee who is able to complete the required training period or
THAT, the student shall be considered apprentice but and as regular employee
and shall have access to technical training and safety and general information concerning
THAT, this AGREEMENT shall take effect on the date of the start of the industry
In WITNESS WHEREOF; the parties have hereunto affixed their signature this
________________________________
(Signature of Student-Trainee)
Baler, Aurora
all of legal age, Filipino and residence of BRGY. DIMANAYAT, SAN LUIS,
AURORA
As a requirement of the College Ladderized and Dual Training Program for the
AUTOMOTIVE.
AURORA .
DEPARTMENT OF INDUSTRIAL TECHNOLOGY xiii
the requirement of the course, RENEBOY B. ATENCIO is taking a part of the Dual
We therefore waive release and discharge the said entity from any liability, claims
or actions that may arise from such training program, except those which cannot
6. We execute this affidavit to attest to the truth of the foregoing statements and for
ACKNOWLEDGEMENT
Known to me to be the same persons who executed the following instrument and
acknowledged to me that the same is of their free and voluntary act and deed.
_______________________________, Philippines.
________________________________
Notary Public
Doc No ________________
Page No ________________
Book No ________________
Series of 2020 ________________
DEPARTMENT OF INDUSTRIAL TECHNOLOGY xv
Grade given by the Industry during the immersion will be recognized as the
Official Grade to reflect in the Grading Sheet as show of faith in respect to the
integrity and independence of the company.
DEPARTMENT OF INDUSTRIAL TECHNOLOGY xvi
REMARKS:
(For the effective and efficient quality of instruction and quality service delivery of
our students and institution, your feedback and suggestions are very valuable to us
and will be treated with confidentiality)
________________________________________________________________________
DEPARTMENT OF INDUSTRIAL TECHNOLOGY xvii
RATING GUIDE:
(Please make your rate daily in accordance to the corresponding performance of the
trainee.)
9-10 Outstanding
7-8 above Satisfactory
5-6 Satisfactory*
3-4 Need Improvement
1-2 Poor
*Passing Grade
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 1
Introduction
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 2
Orientation
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 3
Knowledge /Skills/Quality/Attributes
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 5
Problem Encountered
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 6
Solutions
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 7
Company Profile
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 9
Pictures
DEPARTMENT OF INDUSTRIAL TECHNOLOGY 11
Others Attachments