Professional Documents
Culture Documents
Catalogo HAKKO 2014
Catalogo HAKKO 2014
Catalogo HAKKO 2014
DENMARK
SWEDEN
HAKKO G l o
IRELAND
POLAND
GERMANY
UNITED KINGDOM
FRANCE CZECH REPUBLIC
SWITZERLAND HUNGARY
ITALY ROMANIA
PORTUGAL SPAIN CHINA BEIJING
TURKEY KOREA
IRAN
CHINA XIAN
ISRAEL
CHINA SHANGHAI
EGYPT
INDIA
CHINA GUANGZHOU
UAE HONG KONG
VIETNAM
THAILAND PHILIPPINES
MALAYSIA
SINGAPORE
INDONESIA
SOUTH AFRICA
AUSTRALIA
http://www.hakko.com/
b a l Network
USA
MEXICO
BRAZIL
NEW ZEALAND
ARGENTINA
As of Sept. 2013
WORLDWIDE NETWORK
For more details on HAKKO affiliates and distributors,
visit the official HAKKO website at www.hakko.com
!
Click
1
Q u a l i t y To o l s f o r t h e
Click
!
!
Click
https://doc.hakko.com/?l=en
http://www.hakko.com/english/tip_selection/
2
Electronics Industry
New
Products
Page
6
Page
16
3
Index
Soldering Iron
All-round Soldering Station & Accessories High Performance Soldering Station
FX-888D FX-8801 FX-8803 FX-8804 FX-951 FX-950 FX-838
Soldering station (65W) Soldering iron Soldering gun Hot tweezers (70W) (70W) (150W)
Soldering Pot
Soldering Pot
FX-301B FX-300 96/96-1
High performance type High performance type
4
Desoldering / Rework
Desoldering Tool
FM-204 474 809 815 816
Pump built-in type (70W) Pump built-in type (50W) Gun type Stick type (Lead-free) Gun type (Lead-free)
Rework System
808 SPPON WICK 702B
Portable type
Smoke Absorber
Air Purifying Type Desktop Type
FA-430 FA-400 490
5
All-Round Soldering Station
New
N2 Hot Tweezer
Soldering Soldering Rework
(Option) (Option)
Station
Output voltage AC 26 V
Dimensions 100 (W) × 120 (H) × 120 (D) mm
Weight 1.2 kg
Soldering Iron
Power consumption 65 W (26 V)
Tip to ground resistance <2 Ω
Tip to ground potential <2 mV
Heating element Ceramic heater
Standard tip Shape-B (No.T18-B)
Cord length 1.2 m
Total length* 217 mm (with B tip)
Weight* 46 g (with B tip)
* Without cord
6
Soldering Iron
Features
Strict temperature management
● Digital display
● Password function
Settings can be locked using a password to prevent them
from being changed unexpectedly.
● Preset mode
Simply select the desired temperature from a selection of
preset temperatures registered in advance. (Up to 5 preset
temperatures can be registered.)
The display returns to Preset 1 when the UP button is pressed a sixth time.
● Adjustment mode
With adjustment mode, what used to be a troublesome
procedure is now as simple as entering the measured tip
temperature in the FX-888D.
100
50
0
20 40 60 80 100 120 140 160 180
Time (sec.)
7
Accessories for HAKKO FX-888D
Packing List
Tip included
FX-8803 Handpiece, Instruction manual
LEAD
FREE
Handpiece, Caution label, Heat resistant pad,
FX-8804 Instruction manual
Specifications
Model No. FX-8802
Power consumption 65 W (26 V)
Temperature range 50 to 480ºC
Tip to ground resistance <2 Ω
Tip to ground potential <2 mV
Heating element Ceramic heater
Standard tip Shape-B (No.T18-B)
Option
FX-8803
Part No. Name Specifications
Iron holder
C1437 –
(with cleaning sponge)
FX-8804
Part No. Name Specifications
Iron holder
FH800-04BY Blue & yellow
(with cleaning sponge)
Iron holder
FH800-04SV Silver
8 (with cleaning sponge)
Soldering Iron
Replacement Tips for the FX-8801 and FX-8803 Unit: mm
R0
ø0.5
R0 R0 4
.5 .2 .2
0°
R0.2 3
5
45°
0.
14.5 13.2 10.5 22.5 13.5
ø1.5
ø2.5
ø0.8
ø2
ø1
60
°
60
° 45°
7
45°
1.6
1
45°
1
0.
5
2.
2.
13.5 14.5
15.5 13.5 10
ø5
ø0.8
45° 45°
5
45° 45°
2
2
3.
14 0.6 14.5
4.
ø1.2
ø3.2
ø2.4
ø1.2
ø1.6
ø1.3
ø5.2
ø3.2
ø2
25
.1
R0
1 °
1 1.3 60
22.5 1 14.5
22.5 18 16.5
T18-S9 T18-I
R0
ø1.2
.2
0.4
15.5 14.5
* These tips are tinned on the soldering surface only.
9
High Performance Soldering Station
N2
Soldering Soldering
(Option)
N2
Soldering Soldering
(Option)
10
Soldering Iron
Features Packing List
Thermal recovery graph Station, Handpiece (FM-2028), Control card, Power
(Comparison of HAKKO products) FX-951 cord, Connection cable, Heat resistant pad, Iron
holder, Instruction manual
Temperature (℃)
400
Station, Handpiece (FM-2028), Lock key, Heat
mperature (℃)350 FX-950 resistant pad, Iron holder, Instruction manual
400 300
350 250
200
Specifications
300 150 FX-951 and FX-950 Model No. FX-951 and FX-950
Previous model (936 and 937)
250 100 Power consumption 75 W
50 Temperature range 200 to 450ºC
200
0
50 100 150 200 250 300 350 Time (sec.) Temperature stability ±5ºC at idle temperature
150 FX-951 and FX-950 Station
Test criteria Previous model (936 and 937)
Output voltage AC 24 V
100
A thermocouple is mounted on the tip and the FX-951: 80 (W) x 130 (H) x 131 (D) mm
Dimensions
50 tip temperature is measured when soldering FX-950: 80 (W) x 118 (H) x 138 (D) mm
Measurement method Sensor
ø1.6 mm × 5 mm solder to paper phenol Weight 1.2 kg
copper board once every 3 seconds.
0 Tip Heating element
Time (sec.) Iron
50 Board 100 150 Paper200 250
phenol copper board. 300 350 Soldering
Temperature setting 350°C Power consumption 70 W (24 V)
Lead-free solder (Sn/Ag/Cu), Tip to ground resistance <2 Ω
Solder
diameter: 1.6 mm x 5 mm Tip to ground potential <2 mV
Heating element Composite heater
Composite tip Cord length 1.2 m
Total length* 188 mm (with 2.4D tip)
Sensor
Weight* 30 g (with 2.4D tip)
* Without cord
Tip Heating element
For further details, see the N2 soldering system (P.24 & P.25).
11
High Performance Soldering Station
ø5.5
139
T15-B Shape-B T15-B2 Shape-0.5B T15-B3 Shape-0.7B T15-B4 Shape-0.4B T15-BLL Shape-BL
Long
B
.2 .5 .7 .4
R0 R0 R0 R0 .2
7.5 10 5 5 R0 15
T15-BC1 Shape-1BC T15-BC2 Shape-2BC T15-BC3 Shape-3BC T15-BC12 Shape-1.2BC T15-BC15 Shape-1.5BC
T15-BCF1* T15-BCF2* T15-BCF3*
ø1.2
ø1.5
ø2
ø3
ø1
45° °
45° 60
1
°
60
1.
45°
1
3
2.
10
3.
15
1.7
1.5
11.5 11.5 17
BC
T15-BC28 Shape-2.8BC T15-BCM2 Shape-2BC T15-BCM3 Shape-3BC T15-SBC04 Shape-0.4SBC
Bevel with indent Bevel with indent
ø3
ø2.8
ø2
ø0.45
1
2.
° 45° 45°
3.
9
60
1
0.
°
2.
10 60
17.6 11.5
0.6
3.2
14
1.
8
3.
5
ø3
ø1
ø4
C
° ° °
60 60
2
60 45°
1
16
12 19.5 11.5
T15-D08 Shape-0.8D T15-D12 Shape-1.2D T15-D16 Shape-1.6D T15-D2 Shape-2D T15-D24 Shape-2.4D
ø2.4
ø1.6
ø1.2
ø0.8
ø2
T15-D32 Shape-3.2D T15-D4 Shape-4D T15-D52 Shape-5.2D T15-DL32 Shape-3.2D T15-DL4 Shape-4D
Long Long
ø5.2
ø3.2
ø3.2
ø4
ø4
5 8.5 10 22
8
ø1.5
13 15
I
.2 .2 5
.1
R0 R0 R0
9.5 12.7 13.5
T15-J02 Shape-0.2J T15-JD14 Shape-1.4JD T15-JD16 Shape-1.6JD T15-JL02 Shape-0.2JL T15-JS02 Shape-0.2JS
6 6
3.5 7.5 1.6
J 7
30°
30°
2 4.5
30°
30°
30°
.8
4.5
.4
9.3
.6
ø0
7.9
ø1
R0.2
R0.2
ø1
R0.2
12
0.6
R0.3
12
Soldering Iron
T15-K Shape-K
ø4.7 T15-KF Shape-KF T15-KL Shape-KL T15-KU Shape-KU
ø4.7
ø4.7
ø3
K
T15-R20 Shape-2.0R T15-R23 Shape-2.3R T15-R27 Shape-2.7R T15-R34 Shape-3.4R T15-R48 Shape-4.8R
ø4.5
ø4.6
2.03
ø7.2
ø5.8
2.3
4.8
5.2
2.7
3.4
R
1.27 1.57 1.5 1.8 2 1.8 1.8 2.3 1.8
5.2 5.7 5 5.7 5.2
T15-SB02 Shape-0.2SB T15-SB03 Shape-0.3SB T15-SB05 Shape-0.5SB T15-SB08 Shape-0.8SB T15-SBS04 Shape-0.4BS
3 .5 .8
0. R0 R0
.2
.4
R
R0
R0
14 16.5 10.5 10.5 14
SB
T15-SBS07 Shape-0.7BS
3
.7
13
R0
11.1
11.1
11.1
9.5
9.5
9.5
6.7
5.1
10.4 2.3
4.6 2.3 18.3 3.2
4.5 15.8 3.2 13.2 3.2
4.5 5.5 5.5 5.5
TUNNEL
T15-1006** T15-1007** T15-1008** T15-1009** T15-1010**
Tunnel 6.9 x 11.4 Tunnel 7.9 x 18.8 Tunnel 19.5 x 10.2 Tunnel 13.4 x 20.5 Tunnel 19.5 x 12
20.9
19.5
14.8
13.4
20.9
19.5
9.3
7.9
8.7
6.9
17.9
12.8
11.5
8.5
9.7
19
14
QUAD
T15-1206** T15-1207** T15-1208** T15-1209** T15-1210**
Quad 22.5 x 16.5 Quad 15.5 x 15.5 Quad 15.8 x 15.8 Quad 8.4 x 8.4 Quad 15.4 x 12.8
16.5
17.7
12.8
15.5
16.7
15.8
8.4
9.6
14
17
8.4 5.5
22.5 7.3 15.5 6.5 15.8 7 15.4 7
9.6
23.7 16.7 17 16.6
T15-1401** Spatula 10.4 T15-1402** Spatula 15.7 T15-1403** Spatula 21.2 T15-1406** Spatula 40
2
2
SPATULA
10.4 7.2 15.7 7.2 21.2 7.2 40 7.2
9.5 9.5 9.5 10.5
APPLICA
30° 1
TIONS 19
5
TYPE 1.2 4
17
5
.7
R0
13
Heavy Duty Soldering Iron
N2
Soldering Soldering
(Option)
90
T20-B2 Shape-0.5B T20-BC2 Shape-2BC T20-BC3 Shape-3BC T20-BC4 Shape-4BC T20-BCF2* Shape-2BC
ø3
ø2
ø2
ø4
.5
R0 45° 45° 45° 45°
3
10 10
4
2.
2.
4
12 12 12
3.
4.
T20-BCF3* Shape-3BC T20-BCF4* Shape-4BC T20-BCM2 Shape-2BC with Indent T20-BCM3 Shape-3BC with Indent T20-BL Shape-BL
ø3
ø3
ø2
ø4
.2
45° 45° 45° 45° R0
1. .3
2
2. .4
4
10 15
4
3
4
12 12 12
5
3.
4.
T20-BL2 Shape-2BL T20-BL3 Shape-3BL T20-C5 Shape-5C T20-C6 Shape-6C T20-D16 Shape-1.6D
ø1.6
ø6
ø5
45° 45°
6
.5
R1
R0
10 10 0.5
15 15
3
12
5.
T20-D24 Shape-2.4D T20-D32 Shape-3.2D T20-D6 Shape-6D T20-J02 Shape-0.2J (0.2RSB) T20-K Shape-K
3.5
ø3.2
ø2.4
ø5
ø6
30°
1.2 2 45°
0.5 0.5
R0.2
10 10 11.5 14
9
T20-KU Shape-KU
ø3
1.2
45°
14
* These tips are tinned on the soldering surface only.
14
Soldering Iron
Features
Graph of a comparison of the performance of the HAKKO FX-838 and a conventional station
Temperature (˚C)
400
HAKKO FX-838 (150W) HAKKO FX-951 (70W)
14.6 sec. 17.1 sec. Test criteria
350
Thermocouples are mounted on the tip and
the soldered portion on the board, and the
300
Soldering tip Measurement method
Point 1 time until the soldered portion reaches
Point 2
Point 3 250°C is measured for 5 points.
250 Point 4
Point 5 Board Bakelite board
200 Component used Terminal
Tip shape Shape-1.6D
150
Temperature setting 340°C
100 Lead-free solder (Sn/Ag/Cu),
Solder
diameter: 0.5 mm
50
Time (sec.)
0
10 20 30 40 50 60 70 80 90
Soldering Iron
Power consumption 150 W (27 V)
Tip to ground resistance <2 Ω
Tip to ground potential <2 mV
Heating element Ceramic heater
Cord length 1.2 m
Total length* 175 mm (with 2.4D tip)
Weight* 31 g (with 2.4D tip)
For further details, see the N2 soldering system (P.24 & P.25). * Without cord
15
High Performance Rework Station & Accessories
N2 Hot Tweezer
Soldering Soldering Desoldering Rework
(Option) (Option) (Option)
Connection for
FM-2024 suction hose Air output for FM-2029
D S
Handpiece Receptacle 1 Receptacle 2 Receptacle 3
FM-2027
FM-2024 *1 *1
Channel D Channel S FM-2029
Handpiece FM-2022
connector connector
FM-2027 FM-2023
FM-2022 *1 FM-2026
FM-2023 *1 FM-2030
FM-2024 *2 FM-2031 *2 *2
FM-2026 *3 *1 The FM-2024 can be connected to receptacle 2 and 3. However, only one FM-2024 can
*1 When the FM-2022 or FM-2023 is connected to the channel D connector, both channel be used with the station.
connectors can’t be used at the same time. *2 For the FM-2031 and FM-2026, each handpiece needs an N2 generator (HAKKO
*2 When two FM-2024s are connected to the channel connectors, each FM-2024 must be FX-780), flow meter (HAKKO FX-791), compressor, regulator, etc. For further details,
connected to the desolder control box. see the N2 soldering system (P.24).
*3 For the FM-2026, each handpiece needs an N2 generator (HAKKO FX-780), flow meter NOTE: The FM-2024 and FM-2029 can’t be used at the same time.
(HAKKO FX-791), compressor, regulator, etc. For further details, see the N2 soldering
system (P.24).
16
Soldering Iron
Accessories
LEAD LEAD
FREE FREE
LEAD LEAD
FREE FREE
LEAD LEAD
FREE FREE
LEAD LEAD
FREE FREE
17
High Performance Rework Station & Accessories
Specifications
Model No. FM-203 Model No. FM-2022
Power consumption 140 W Power consumption 140 W (24 V)
Temperature range 200 to 450ºC Tip to ground resistance <2 Ω
Temperature stability ±5ºC at idle temperature Tip to ground potential <2 mV
Heating element Composite heater
Station
Cord length 1.2 m
Output voltage AC 24 V
Total length* 148 mm (with SOP 25L tip)
Dimensions 120 (W) × 120 (H) × 190 (D) mm
Weight* 64 g (with SOP 25L tip)
Weight 2.7 kg
* Without cord
Soldering Iron (FM-2027)
Model No. FM-2023
Power consumption 70 W (24 V)
Power consumption 140 W (24 V)
Tip to ground resistance <2 Ω
Tip to ground resistance <2 Ω
Tip to ground potential <2 mV
Tip to ground potential <2 mV
Heating element Composite heater
Heating element Composite heater
Cord length 1.2 m
Standard tip Shape-I: 2 pcs/set (No.T9-I)
Total length* 188 mm (with 2.4D tip)
Cord length 1.2 m
Weight* 30 g (with 2.4D tip)
Total length* 117 mm (with I tip)
* Without cord
Weight* 37 g (with I tip)
Model No. FM-206
* Without cord
Power consumption 410 W (max.)
Model No. FM-2024
FM-2026/2027: 200 to 450ºC
FM-2022/2023: 200 to 400ºC • Desoldering Tool
FM-2024: 350 to 450ºC Power consumption 70 W (24 V)
Temperature range
FM-2029: 100 to 550ºC
FM-2030: 200 to 500ºC Nozzle to ground resistance <2 Ω
FM-2031: 200 to 500ºC Nozzle to ground potential <2 mV
Temperature stability ±5ºC at idle temperature Heating element Composite heater
Cord length 1.2 m
Station
Total length* 180 mm (with ø1.0 mm nozzle)
Output voltage AC 24 V
Weight* 65 g (with ø1.0 mm nozzle)
Vacuum generator Cylinder type vacuum pump
Vacuum pressure 80 kPa (600 mmHg, max.) • Desolder Control Box
Suction flow 14 L/min. Power consumption 12 W (24 V)
Air flow 6 L/min. (max.) Output voltage 24 V
Dimensions 162 (W) × 136 (H) × 245 (D) mm Vacuum generator Ejector type
Weight* 6.2 kg Vacuum pressure Max. 93 kPa (700 mmHg)
18
Soldering Iron
Specifications
Model No. FM-2030 Model No. FM-2031
Power consumption 140 W (24 V) Power consumption 140 W (24 V)
Tip to ground resistance <2 Ω Tip to ground resistance <2 Ω
Tip to ground potential <2 mV Tip to ground potential <2 mV
Heating element Composite heater Heating element Composite heater
Cord length 1.3 m Cord length 1.2 m
Total length* 224 mm (with 2.4D tip) Total length 231 mm (with 2.4D tip)
Weight* 41 g (with 2.4D tip) Weight 47 g (with 2.4D tip and nozzle assembly E)
* Without cord * Without cord and tube
Packing List
Station, Handpiece (FM-2027), Sleeve assembly, FM-2022 Parallel remover, Heat resistant pad, Iron holder,
Connecting cable, Power cord, Control card, Iron (Conversion kit) Connecting cable, Instruction manual
FM-203 holder, Tip tray, Heat resistant pad, Instruction
manual Mini parallel remover, Soldering tip (T9-I), Heat
FM-2023
resistant pad, Iron holder, Component bed,
Station, Power cord, Tip tray, Desoldering tool (Conversion kit) Connecting cable, Instruction manual
(FM‑2024), Handle (for gun configuration for
FM‑2024), Iron holder (for FM‑2024), Ceramic paper Desoldering tool, Handle (for gun configuration),
filter (10 pcs; for FM‑2024), Nozzle remover (for FM-2024 Desoldering control box, Filter pipe assembly, Iron
FM‑2024), Cleaning drill for heating element (for (Conversion kit, holder, Cleaning drill for heating element, Nozzle
FM‑2024), Connecting cable (for FM‑2024), remover, Ceramic paper filter (10 pcs), Connecting
FM-206 with DCB)
Handpiece (FM‑2027), Iron holder (for FM‑2027), cable, Instruction manual
Heat resistant pad (for FM‑2027), Connecting cable
(for FM‑2027), Hot air handpiece (FM‑2029), Iron Handpiece, Sleeve cover, Sleeve assembly
holder (for FM‑2029), Heat resistant pad (for FM-2026
(yellow), Heat resistant pad, Iron holder, Connecting
FM‑2029), Connecting cable (for FM‑2029), (Conversion kit) cable, Instruction manual
Instruction manual
FM-2027 Handpiece, Sleeve assembly (yellow), Heat resistant
(Conversion kit) pad, Iron holder, Connecting cable
150
100
50
Time (sec.)
0
50 100 150 200 250
Test criteria
Turn on and off with a hand switch. Solder at 5 points and measure the time until
Test method the temperature of the workpiece reaches
250°C.
Board Bakelite board
Component used Screw
Tip shape Shape-2.4D
Temperature setting 350°C
Solder Lead-free solder (Sn/Ag/Cu), diameter: 1.0 mm
19
High Performance Soldering Accessories
ø5.5
139
T15-B Shape-B T15-B2 Shape-0.5B T15-B3 Shape-0.7B T15-B4 Shape-0.4B T15-BLL Shape-BL
Long
B
.2 .5 .7 .4
R0 R0 R0 R0 .2
7.5 10 5 5 R0 15
T15-BC1 Shape-1BC T15-BC2 Shape-2BC T15-BC3 Shape-3BC T15-BC12 Shape-1.2BC T15-BC15 Shape-1.5BC
T15-BCF1* T15-BCF2* T15-BCF3*
ø1.2
ø1.5
ø2
ø3
ø1
45° °
45° 60
1
°
60
1.
45°
1
3
2.
10
3.
15
1.7
1.5
11.5 11.5 17
BC
T15-BC28 Shape-2.8BC T15-BCM2 Shape-2BC T15-BCM3 Shape-3BC T15-SBC04 Shape-0.4SBC
Bevel with indent Bevel with indent
ø3
ø2.8
ø2
ø0.45
1
2.
° 45° 45°
3.
9
60
1
0.
°
2.
10 60
17.6 11.5
0.6
3.2
14
1.
8
3.
5
ø3
ø1
ø4
C
° ° °
60 60
2
60 45°
1
16
12 19.5 11.5
T15-D08 Shape-0.8D T15-D12 Shape-1.2D T15-D16 Shape-1.6D T15-D2 Shape-2D T15-D24 Shape-2.4D
ø2.4
ø1.6
ø1.2
ø0.8
ø2
T15-D32 Shape-3.2D T15-D4 Shape-4D T15-D52 Shape-5.2D T15-DL32 Shape-3.2D T15-DL4 Shape-4D
Long Long
ø5.2
ø3.2
ø3.2
ø4
ø4
5 8.5 10 22
8
ø1.5
13 15
I
.2 .2 5
.1
R0 R0 R0
9.5 12.7 13.5
T15-J02 Shape-0.2J T15-JD14 Shape-1.4JD T15-JD16 Shape-1.6JD T15-JL02 Shape-0.2JL T15-JS02 Shape-0.2JS
6 6
3.5 7.5 1.6
J 7
30°
30°
2 4.5
30°
30°
30°
.8
4.5
.4
9.3
.6
ø0
7.9
ø1
R0.2
R0.2
ø1
R0.2
12
0.6
R0.3
20
Soldering Iron
T15-K Shape-K
ø4.7 T15-KF Shape-KF T15-KL Shape-KL T15-KU Shape-KU
ø4.7
ø4.7
ø3
K
T15-R20 Shape-2.0R T15-R23 Shape-2.3R T15-R27 Shape-2.7R T15-R34 Shape-3.4R T15-R48 Shape-4.8R
ø4.5
ø4.6
2.03
ø7.2
ø5.8
2.3
4.8
5.2
2.7
3.4
R
1.27 1.57 1.5 1.8 2 1.8 1.8 2.3 1.8
5.2 5.7 5 5.7 5.2
T15-SB02 Shape-0.2SB T15-SB03 Shape-0.3SB T15-SB05 Shape-0.5SB T15-SB08 Shape-0.8SB T15-SBS04 Shape-0.4BS
3 .5 .8
0. R0 R0
.2
.4
R
R0
R0
14 16.5 10.5 10.5 14
SB
T15-SBS07 Shape-0.7BS
3
.7
13
R0
11.1
11.1
11.1
9.5
9.5
9.5
6.7
5.1
10.4 2.3
4.6 2.3 18.3 3.2
4.5 15.8 3.2 13.2 3.2
4.5 5.5 5.5 5.5
TUNNEL
T15-1006** T15-1007** T15-1008** T15-1009** T15-1010**
Tunnel 6.9 x 11.4 Tunnel 7.9 x 18.8 Tunnel 19.5 x 10.2 Tunnel 13.4 x 20.5 Tunnel 19.5 x 12
20.9
19.5
14.8
13.4
20.9
19.5
9.3
7.9
8.7
6.9
17.9
12.8
11.5
8.5
9.7
19
14
QUAD
T15-1206** T15-1207** T15-1208** T15-1209** T15-1210**
Quad 22.5 x 16.5 Quad 15.5 x 15.5 Quad 15.8 x 15.8 Quad 8.4 x 8.4 Quad 15.4 x 12.8
16.5
17.7
12.8
15.5
16.7
15.8
8.4
9.6
14
17
8.4 5.5
22.5 7.3 15.5 6.5 15.8 7 15.4 7
9.6
23.7 16.7 17 16.6
T15-1401** Spatula 10.4 T15-1402** Spatula 15.7 T15-1403** Spatula 21.2 T15-1406** Spatula 40
2
2
SPATULA
10.4 7.2 15.7 7.2 21.2 7.2 40 7.2
9.5 9.5 9.5 10.5
APPLICA
30° 1
TIONS 19
5
TYPE 1.2 4
17
5
.7
R0
21
High Performance Rework Station & Accessories
SOP
T16-1005 SOP 6L T16-1006 SOP 8L T16-1007 SOP 10L T16-1008 SOP 13L T16-1009 SOP 16L
0.7 6 0.7 8 0.7 10 0.7 13 0.7 16
T22-BL Shape-BL T22-BL2 Shape-2BL T22-BC2 Shape-2BC T22-C3 Shape-3C T22-C5 Shape-5C
ø3
ø5
ø2
5
2
60˚
0.
0.
R
R
45˚ 45˚
3
15 15
3.7
17
2.
5.
12 10
T22-C6 Shape-6C T22-D08 Shape-0.8D T22-D12 Shape-1.2D T22-D16 Shape-1.6D T22-D24 Shape-2.4D
ø6
ø2.4
ø1.6
ø1.2
ø0.8
45° 3 3 3
6
5
10 0.5 12 0.5 10 0.5 12 0.5 7
T22-D32 Shape-3.2D T22-D45 Shape-4.5D T22-D52 Shape-5.2D T22-J02 Shape-0.2J T22-JD08 Shape-0.8JD
ø5.2
ø4.5
ø3.2
4 6.3
.2 30˚
30˚
3 11 5 .8
ø0
0.3
8 0.5 15 8
T22-K Shape-K
ø5
45˚
2 15
22
Soldering Iron
Optional Nozzles for the FM-2024 Unit: mm
N3-06 Nozzle ø0.6 N3-08 Nozzle ø0.8 N3-10 Nozzle ø1.0 N3-13 Nozzle ø1.3 N3-16 Nozzle ø1.6
ø1.6
ø1.9
ø0.6
ø0.8
ø2.6
ø1.3
ø2.2
ø3
ø2
ø1
10.7 10.7 10.7 10.7 10.7
N3-20 Nozzle ø2.0 N3-23 Nozzle ø2.3 N3-L10 Nozzle ø1.0 Long
ø3.8
ø2.3
ø3.4
ø2.3
ø2
ø1
10.7 10.7 16.7
øB
øA
øA øB
23
N2 Soldering System
Connection Method
Water filter Regulator Water filter Air filter Air dryer Compressor
0.01 µm 0.01 µm 0.3 µm
Air tube
Air tube OD ø6 mm
OD ø6 mm
Air in
N2 out
Soldering Station N2 Soldering Iron
N2 gas generator
HAKKO FX-780
HAKKO FX-951 HAKKO FM-206 HAKKO FM-203 HAKKO FM-204 HAKKO FX-950 HAKKO FM-2026
70W
Set-up example
HAKKO FX-780
HAKKO FX-791
HAKKO FX-951
HAKKO FM-2026
24
Soldering Iron
Improved solderability
• Wettability and spreadability comparisons • Less bridging occurs even for components susceptible to
bridging.
Without N2 Approx. With N2
50% up
Without N2 With N2
Specifications
Model No. FX-780 Model No. FX-791
Air supply pressure 0.3 to 0.7 MPa Pressure of discharged gas 0.2 MPa (2.0 kgf/cm2)
Concentration of generated N2 99.9% (max.) Gas flow 0.25 to 2.5 L/min.
1.5 L/min. Dimensions 70 (W) × 121 (H) × 134 (D) mm
(When compressed air of 0.5 MPa is supplied Weight 600 g
Amount of generated N2
at 25ºC, the concentration of the generated
nitrogen is 98%.)
Dimensions* 73 (W) × 282 (H) × 71 (L) mm
Weight** 1.5 kg
* Without sockets and valve
** Without racks
Packing List
FX-780 Unit, Rack for unit (2 pcs), Instruction manual FX-791 Unit, Instruction manual
25
N2 Soldering System
ø5.5
144
Nozzle assembly
T17-B2 Shape-0.5B T17-BL Shape-BL T17-BC1 Shape-1BC T17-BCF1* Shape-1BC T17-BC2 Shape-2BC
ø1
ø1
R0
ø2
.5
.2
R0 45° 45°
12 45°
1
10
2.
11.5 11.5 11.5
1
1.
1.
B2708 B2898 B2899 B2899 B2706
Nozzle assembly C Nozzle assembly E Nozzle assembly F Nozzle assembly F Nozzle assembly A
T17-BCF2* Shape-2BC T17-BC3 Shape-3BC T17-BCF3* Shape-3BC T17-D08 Shape-0.8D T17-D16 Shape-1.6D
ø3
ø3
ø0.8
ø1.6
ø2
45° 45°
3
3
45° 0.5
3.
3.
10 10 0.5 3.2 3.5
1
2.
11.5 9.5 10
ø4.7
3.5
ø4.7
ø2.4
ø3
30°
10 12 17 11 1.2
2. 3
45°
2.
3.
45°
9
11.5 10
1.
3.
8
B2706 B2900
Nozzle assembly A Nozzle assembly G * These tips are tinned on the soldering surface only.
ø5.5
Nozzle assembly 87
T22-BL Shape-BL T22-BL2 Shape-2BL T22-BC2 Shape-2BC T22-C3 Shape-3C T22-C5 Shape-5C
ø3
ø5
ø2
5
2
60˚
0.
0.
R
R
45˚ 45˚
3
15 15
3.7
17
2.
5.
12 10
ø2.4
ø1.6
ø1.2
ø0.8
45° 3 3 3
6
5
10 0.5 12 0.5 10 0.5 12 0.5 7
4 6.3
.2 30˚
30˚
3 11 5 .8
ø0
0.3
8 0.5 15 8
45˚
2 15
B3123
Nozzle assembly C
26
Soldering Iron
Tip and nozzle assembly are supplied separately. Please purchase a
Optional Tips and Nozzle Assemblies for the FX-8302 compatible nozzle assembly for your tip referring the chart below. Unit: mm
ø7.2
Nozzle assembly 90
T20-B2 Shape-0.5B T20-BL Shape-BL T20-BL2 Shape-2BL T20-J02 Shape-0.2J (0.2RSB) T20-KU Shape-KU
3.5
ø3
.5 2
0.
R0
.5
R
30°
1.2
45°
R0
R0.2
10 15 15
9 14
ø2
ø2
ø5
45° 45°
R1
2 45°
0.5
3
15 12
2.
2.
14 12 12
ø3
ø5
ø4
ø4
45° 45° 45° 45° 45°
10 10
3
10
4
4
12 12
5.
3.
3.
4.
4.
B3124 B3124 B3124 B3124 B3124
Nozzle assembly D Nozzle assembly D Nozzle assembly D Nozzle assembly D Nozzle assembly D
T20-C6 Shape-6C T20-D24 Shape-2.4D T20-D32 Shape-3.2D T20-BCM2 Shape-2BC T20-BCM3 Shape-3BC
with Indent with Indent
ø3
ø3.2
ø2.4
ø2
ø6
45°
6
45° 45°
1. .3
0.5
2
10 0.5
2. .4
4
3
10 10 12 12
5
B3124 B3124 B3124 B3124 B3124
Nozzle assembly D Nozzle assembly D Nozzle assembly D Nozzle assembly D Nozzle assembly D
T20-D6 Shape-6D
ø6
1.2
11.5
B3561
Nozzle assembly E * These tips are tinned on the soldering surface only.
Nozzle assembly
T18-B Shape-B T18-C05 Shape-0.5C T18-C1 Shape-1C T18-CF1* Shape-1C T18-C2 Shape-2C
ø0.5
R0
ø2
ø1
ø1
.5
° ° 45°
5
45° 60 60
0.
1
2.
ø3
ø2
ø0.8
ø1.2
0.7
2.
14.5
3.
3.
.2
ø2.4
ø1.6
45°
0.5 14.5 0.5 14.5 14
2 14.5
27
Battery-Powered Soldering Iron
Specifications
Turn the nipple
90˚ clockwise. Model No. FX-901
Power supply AA × 4 pcs
Alkaline batteries: 6 W (6 V)
Power consumption
Nickel hydrogen batteries (2150 mAh): 5 W (4.8 V)
Standard tip Shape-B (No.T11-B)
Easy battery replacement
Alkaline batteries: 60 minutes
Battery life*
Nickel hydrogen batteries (2150 mAh): 120 minutes
Total length** 212 mm
Weight*** 76 g
Measurement conditions
· When using new batteries, performance will vary depending on the batteries.
· The operating time was measured from the point that the soldering iron was turned on to
the point at which the temperature dropped below 300ºC, which is the minimum
temperature at which soldering can be performed.
* When using batteries other than those specified above, the performance and the
operating time will vary.
** Without cap
*** Without battery
78.7
.2
R0
7.5
0.5 7.5
28
Soldering Pot
Soldering Pot
Soldering Pot
50 × 50 square 70 × 70 square
50 mm 70 mm
50 mm
Specifications
32 mm
22 mm
7 mm
54 mm
・Pot
Temperature range 100 to 450ºC 100 to 380ºC
50 (W) × 54 (H) × 70 (W) × 64 (H) ×
Dimensions of solder pot
50 (D) mm 70 (D) mm
Molten solder capacity 0.85 kg 1.2 kg
29
Soldering Pot
LEAD
FREE
LEAD
FREE
• Temperature can be adjusted just by turning
a knob during operation.
• Adding an optional specially coated
stainless-steel pot provides compatibility with
lead-free solder.
30
Soldering Pot
Quick heat up Packing List
Time comparison to reach set temperature Unit (with solder pot, 50 × 50 durable type), Spatula,
FX-301B vs. 96 (conventional model) FX-301B J-shaped waste collector, Hexagon wrench,
Instruction manual
Temperature (°C)
400 Unit (with solder pot, 50 × 50), Spatula, J-shaped
FX-300 waste collector, Hexagon wrench, Instruction manual
300
Specifications
200
Test criteria Model No. FX-301B
Set temperature: 300°C 200 W (100 V), 260 W (110 V), 290 W (120 V),
Solder: Sn-Cu (Tin and copper) Power consumption
Time to reach set temperature (within ±10ºC)
240 W (220 V), 260 W (230 V), 280 W (240 V)
100
FX-301B (Parameter setting Sn-Cu) Dimensions 143 (W) × 100 (H) × 220 (D) mm
96 Weight* 1.7 kg
0 5 10 15 20 25 30 35 40 ・Pot
Time (min.)
50 × 50 square: 200 to 450ºC
Temperature range
75 × 75 square: 200 to 380ºC
FX-300 vs. 96 (conventional model)
50 × 50 square durable type:
Temperature (°C) 50 (W) × 43.5 (H) × 50 (D) mm
400 Dimensions of solder pot
75 × 75 square durable type:
75 (W) × 52.5 (H) × 75 (D) mm
50 × 50 square: 0.85 kg
300 Molten solder capacity**
75 × 75 square: 1.2 kg
Option / Replacements
Loosen the screw on both sides. Change the pot and tighten the Part No. Name Specifications
screws. A1539 Solder pot 50 × 50 durable type
* For your safety, be sure to replace the pot after the solder completely cools. A1540 Solder pot 75 × 75 durable type
A1517 Solder pot 50 × 50
A1518 Solder pot 75 × 75
Specially Coated Solder Pot (Durable type)
For solder bath and
A1310 Temperature probe
pot
The special coating prevents the solder pot from corroding,
which ensures that the solder pot has a long service life.
Dimensions of Solder Pot
50 × 50 square 75 × 75 square
□ 50 mm □ 75 mm
□ 50 mm
10 mm
15 mm
□ 47.4 mm
43.5 mm
24 mm
31
Tip Cleaner and Polisher
Specifications
Model No. FT-710
Power consumption 5W
Standard receptacle Receptacle A and B
Dimensions 71 (W) × 77 (H) × 107 (D) mm
Weight 0.45 kg
Controllable solder removal level
・AC adapter
Cleaning brush A Cleaning brush B
Brush Motor rating DC 24V 130 mA
(standard accessory) (optional)
Dimensions 45 (W) × 40 (H) × 65 (D) mm
Resin Metal
Weight 0.25 kg
Material
・Compatibility table
Tip Receptacle A Receptacle B Receptacle C
Some solder remains. Solder is completely removed.
T7, T11, T15
T18, 900M, T14
Image
T10, T20, T13,
after
T17, T22
cleaning
* This cleaner cannot be used with the T15-JL02, quad type, tunnel type, and spatula type
soldering tips of the T15 series.
* There are some tips with dimensions that cannot be adjusted with the standard
receptacles. In this situation, consult your nearest HAKKO dealer or distributor.
Prevents tip oxidation Suitable for soldering small
Benefit and extends the service sections that require control
life of the tip over the amount of solder.
Option
Minimizes decrease in temperature of the tip during Part No. Name Specifications
cleaning A1567 Cleaning brush B Metal brushes, set of 2
Temperature (°C)
B3519 Receptacle C –
375˚C
2.3 sec 2.9 sec 6.0 sec
350˚C
325˚C
FT-710
Wire-type tip cleaner
323˚C 599 B
300˚C
309˚C
HAKKO 599B
275˚C
Clearing sponge
275˚C Prevents soldering LEAD
250˚C FREE
tip oxidation
Test criteria
225˚C Soldering station: HAKKO FX-951 No.599B
Tip Shape: Shape-2.4D
200˚C
32
Tip Cleaner and Polisher
Chemical Paste
LEAD
FREE
• Chemical paste best suited to the removal of
oxidation on soldering iron tips
• Also used for retinning of soldering tips
33
Self Feeder
Self Feeder
Set-Up Example
・Soldering for one-handed operation
Soldering irons HAKKO 373 Solder diameter Tube unit Guide pipe assembly
adjustment ring with switch
+ + + +
* See the applicable soldering
irons in the P.35.
Set-up example
or or
+ + + +
* Compatible with all soldering
irons
Foot switch
Set-up example
or
Feeder switch
34
Soldering-Related Equipment and Materials
Accessory Selection Guide
■One-handed operation
Options
Solder diameter Guide pipe assembly Tube unit
Applicable soldering adjustment ring
Solder feed unit Solder diameter
iron
or or
■Feeder pen
Options
Solder diameter Feeder pen Switch
Applicable soldering adjustment ring
Solder feed unit Solder diameter
iron
or
35
Self Feeder
V-Groove Maker
LEAD
FREE
• Cutting a V-groove put on the solder surface
reduces the splash of solder and flux.
• The solder feed amount can be controlled by
turning the switch on and off.
• Compact, space-saving automatic solder feeder
Features
Minimize solder and flux splash Solder cross-section view 3D view
Cutting a V-groove on the solder surface enables the release Solder Flux
Solder Flux
Test criteria
Measurement method Measure the amount of solder and flux splashing after solder is fed to the soldering iron
Temperature setting for soldering iron 350°C and 400°C
Lead-free (Sn-3Ag-0.5Cu)
Solder Halogen-free flux
ø0.3 mm and ø1.0 mm
Solder feed length 50 mm
* The effect of solder and flux splashing prevention may differ under different operation conditions.
30 30
20 20
10 10
0 0
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Flux
Flux
Flux
Flux
Flux
Flux
Flux
Flux
With v-groove Without v-groove With v-groove Without v-groove With v-groove Without v-groove With v-groove Without v-groove
36
Thermal Wire Stripper
Features
Solves the problem of whiskers and scratches being left by conventional tools
Thermal Conventional
stripping tool
Scratch
Whisker
Replacement Blades
For FT-8002 For FT-8003 (option)
AWG 24 AWG 36
AWG 22 AWG 33
AWG 20 AWG 30
ø5.2
AWG 18 AWG 28
AWG 26
5
0.2
R1
16
G2-1601 Wire stripper blade G2-1602 Wire stripper blade G2-1603 Wire stripper blade G3-1601 Knife type blade
Straight AWG 18 to 24 AWG 26 to 36
37
Lead Cutter, Former
Packing List
Cutting and Forming
Unit, Parts tray, Clamp, Handle, 2.0 mm Hexagon
HAKKO 153 HAKKO 154
153, 154 wrench, 2.5 mm Hexagon wrench, 3.0 mm Hexagon
Cutting and forming Cutting and forming wrench, 4.0 mm Hexagon wrench, Instruction manual
Max. ø5 mm Max. ø5 mm
Min. Min.
Max. 4.2 mm Max. 4.2 mm
ø0.8 mm ø0.5 mm
Min. 0.75 mm
Min. 5.6 mm Max.
Min. 0.5 mm
Min. 5 mm Max.
Specifications
Max. 37 mm 14.5 mm Max. 37 mm 14.5 mm
Part No. 153-1 154-1
Forming Forming Forming size 5.6 mm pitch 5 mm pitch
Min. Min. Max. diameter of lead wire ø0.8 mm (max.) ø0.5 mm (max.)
4.2 mm 4.2 mm
Lead wire* For annealed copper lead wire only
Min. 5.6 mm Max. Min. 5 mm Max.
Max. 37 mm 14.5 mm Max. 37 mm 14.5 mm Outer width of tape 85 mm (max.)
Taping pitch 5 mm
Cutting Cutting
Dimensions 125 (W) × 130 (H) × 110 (D) mm
Max. 50 mm Max. 50 mm Weight** 2 kg
* These tools are not suited to work on components with lead frames (multiangular lead).
** Including handle and clamp
Lead Cutter
Packing List
Unit, Parts tray, Clamp, Handle, 2.0 mm Hexagon
155 wrench, 2.5 mm Hexagon wrench, 3.0 mm Hexagon
Cutting wrench, 4.0 mm Hexagon wrench, Instruction manual
ø12.5 mm
ø15 mm
Specifications
25 mm Part No. 155-1 155-2
2.0 mm Max. diameter of lead wire ø0.8 mm (max.)
1.5 mm Lead wire* For annealed copper lead wire only
ø4 mm
Max. processing part size ø12.5 × 25 mm (max.)
0.8 mm
Feed hole pitch 12.7 mm 15 mm
5.0 or 2.5 mm Lead pitch** 5.0 mm, 2.5 mm 5.0 mm
1.5 mm from taping end, 2.0 mm from
Min. processing size
12.7 mm (No.155-1) component end
15 mm (No.155-2)
Dimensions 110 (W) × 140(H) × 125 (D) mm
* Cutting only
Weight*** 1.7 kg
* These tools are not suited to work on components with lead frames (multiangular lead).
** When shipped, the unit is set for components with a lead pitch of 5.0 mm.
*** Including handle and clamp
38
Lead Cutter, Former
Packing List
FT100, FT150,
Unit, Instruction manual
FT200, FT300
Specifications
Part No. FT100 FT150 FT200 FT300
Width of IC 7.5 mm 10 mm 15 mm 19 mm
8, 14, 16 24, 28
Number of IC leads 22 64
18, 20 40, 42
39
Cutting Tool and Reel Stand
Cutting Tool
Specifications
Part No. Name Max. copper wire cutting capability A B C D E
C
106-01 Cutting tool for flush cut with safety clip 1.3 mm 132 54 13.5 5 20
E 106-02 Cutting tool for flush cut with angled blade 1.3 mm 129 54 13.5 5 16
106-03 Cutting tool for flush cut with small blade 0.8 mm 130 54 9.5 4 18
D
106-04 Cutting tool for a front, flush cut 1.0 mm 138 54 14 6 27
106-05 Cutting tool for flush cut 1.3 mm 132 54 13.5 5 20
A 106-06 Short nose pliers – 140 54 13 6 29
106-07 Long nose pliers – 154 54 13 6 40
106-08 Bent nose pliers – 146 54 13 4 35
(Unit: mm)
Reel Stand
No.611-2
40
Vacuum Pick-Up Tool
Battery-Powered Type
41
Desoldering Tool
N2
Soldering Soldering Desoldering
(Option) (Option)
N3-06 Nozzle ø0.6 N3-08 Nozzle ø0.8 N3-10 Nozzle ø1.0 N3-13 Nozzle ø1.3
ø1.9
ø0.6
ø0.8
ø2.6
ø1.3
ø2.2
ø2
ø1
N3-16 Nozzle ø1.6 N3-20 Nozzle ø2.0 N3-23 Nozzle ø2.3 N3-L10 Nozzle ø1.0 Long
ø1.6
ø3.8
ø2.3
ø3.4
ø2.3
ø3
ø2
ø1
42
Desoldering and Rework
Features
Excellent thermal recovery
HAKKO FM-204
Temperature (°C) HAKKO 474
450
Approx. 30 sec. Approx. 100 sec.
400
350
300 76 sec.
250 104 sec.
200
Test criteria
150 The time until the soldered portion reaches
Measurement method
100 200°C is measured for 20 points.
50 Nozzle used ø1.0 mm
Solder Lead-free solder
0
50 100 150 200 250 300 350
Time (sec.)
Sleep function and Auto Power Replacing the handpiece enables soldering.
Shut-off function
■Soldering ■N2 System
43
Desoldering Tool
Desoldering
Handpiece Variations
LEAD LEAD
FREE FREE
44
Desoldering and Rework
Packing List
Station, 809 Desoldering gun, Filter pipe, Ceramic paper filter (S; 2 pcs), Ceramic paper filter (L; 4 pcs), Spring filter (3 pcs), Cleaning
474
pin for 1.0 mm diameter nozzle, Cleaning drill for 1.0 mm diameter nozzle, Cleaning pin for heating element, Cleaning pin holder,
(with 809) Wrench, Silicone grease, Iron holder base, Cleaning sponge, Spring iron holder, Instruction manual
Station, 815 Desoldering tool, Filter pipe, Ceramic paper filter (S; 2 pcs), Ceramic paper filter (L; 4 pcs), Spring filter (3 pcs), Cleaning
474
pin for 1.0 mm diameter nozzle, Cleaning drill for 1.0 mm diameter nozzle, Cleaning pin for heating element, Cleaning pin holder,
(with 815) Wrench, Silicone grease, Anti-seizure, Iron holder base, Cleaning sponge, Iron receptacle with holder, Instruction manual
Station, 816 Desoldering gun, Filter pipe, Ceramic paper filter (S; 2 pcs), Ceramic paper filter (L; 4 pcs), Spring filter (3 pcs), Cleaning
474
pin for 1.0 mm diameter nozzle, Cleaning drill for 1.0 mm diameter nozzle, Cleaning pin for heating element, Cleaning pin holder,
(with 816) Wrench, Silicone grease, Anti-seizure, Iron holder base, Cleaning sponge, Iron receptacle with holder, Instruction manual
Specifications
474 474 474
Model No.
(with 809) (with 815) (with 816)
Power consumption 100 W
Temperature range 380 to 480ºC
・Station
Output voltage AC 24 V
Vacuum generator Double cylinder type
Vacuum pressure Max. 80 kPa (600 mmHg)
Suction flow* 15 L/min.
Dimensions 165 (W) × 135 (H) × 260 (D) mm
Weight** 3.8 kg
・Desoldering Tool
Type Gun Pen Gun
Power consumption 50 W (24 V)
Nozzle to ground
<2 Ω
resistance
Nozzle to ground potential <2 mV
Heating element Ceramic heater
ø1.0 mm S type ø1.0 mm S type
Standard nozzle
(No. A1003) (No. A1499)
Dimensions 135 (W) × 174 (H) mm 200 (W) × 80 (H) mm 180 (W) × 150 (H) mm
Weight** 200 g 100 g 120 g
* Measured at the filter case suction port of the station.
** Without cord and hose
A
A1497 B 0.8 2.2
45
Desoldering Tool
Nozzle included
Specifications
Model No. 808
Packing List Power consumption 70 W (100-110 V, 220-230 V), 100 W (120 V, 240 V)
Temperature range 380 to 480ºC
Unit, Pre-filter (3 pcs), Ceramic paper filter (L; 4 pcs), Nozzle to ground resistance <2 Ω
Cleaning pin for 1.0 mm diameter nozzle, Cleaning pin Nozzle to ground potential <2 mV
808 for heating element, Wrench, Filter pipe with pre-filter
Vacuum generator Double cylinder type
and filter holder, Instruction manual
Vacuum pressure Max. 80 kPa (600 mmHg)
Suction flow 10 L/min.
Heating element Ceramic heater
Standard nozzle ø1.0 mm (No. A1005)
Replacement Nozzles
Dimensions 235 (W) × 170 (H) mm
Weight* 420 g
For information on replacement nozzles, see P.45.
* Without cord
46
Desoldering Tool and Wire
Desoldering Wire
Features
Through-hole solder removal Bridging solder removal
Specifications
Regular type (Flux) Unflux type (Unflux) No clean type (Low residue flux) ESD SAFE package
Part No. Description Part No. Description Part No. Description
FR100-00 1.5 m × 0.6 mm FR110-00 1.5 m × 0.6 mm FR120-00 1.5 m × 0.6 mm
FR100-01 1.5 m × 0.9 mm FR110-02 1.5 m × 1.4 mm FR120-01 1.5 m × 0.9 mm
FR100-02 1.5 m × 1.4 mm FR110-03 1.5 m × 1.9 mm FR120-02 1.5 m × 1.4 mm
FR100-03 1.5 m × 1.9 mm FR110-04 1.5 m × 2.5 mm FR120-03 1.5 m × 1.9 mm
FR100-04 1.5 m × 2.5 mm FR110-05 1.5 m × 3.3 mm FR120-04 1.5 m × 2.5 mm
FR100-05 1.5 m × 3.3 mm FR120-05 1.5 m × 3.3 mm
47
SMD Rework Station
Hot Air
Reworking
Hot Air
Reworking
Hot Air
Reworking
48
Desoldering and Rework
Features
New mechanism for maintaining consistent temperature Settable 3-step temperature profile (FR-803B)
Step 1 Step 2 Step 3 Cool down
Air temperature
Closed timer time
Opened timer
time
New Conventional
Time
On-off by handy switch (FR-802 and FR-803B)
Built-in vacuum pickup (FR-803B)
Vacuum pipe
Heat-resistance pad adjustment knob
Sensor A ・Handpiece
280 W (100 V), 330 W (110 V), 400 W (120 V),
Power consumption
540 W (220 V), 600 W (230 V), 650 W (240 V)
Sensor B Total length* 185 mm 200 mm 200 mm
Weight* 115 g 200 g 200 g
* Without cord
49
SMD Rework Station
A
Air flow The size in each description
B indicates the size of the package.
1.8
A1125B QFP 10 × 10 A1262B QFP 12 × 12 A1126B QFP 14 × 14 A1128B QFP 14 × 20 A1127B QFP 17.5 × 17.5
10
19
15
15
12
A1261B QFP 20 × 20 A1129B QFP 28 × 28 A1263B QFP 28 × 40 A1265B QFP 32 × 32 A1203B QFP 35 × 35
31
21
31
29
A1264B QFP 40 × 40 A1215B QFP 42.5 × 42.5 A1180B BQFP 17 × 17 A1181B BQFP 19 × 19 A1182B BQFP 24 × 24
13.6
21
16
39
40
A1131* SOP 4.4 × 10 A1132* SOP 5.6 × 13 A1133* SOP 7.5 × 15 A1134* SOP 7.5 × 18 A1258B SOP 7.6 × 12.7
11.7
15
16
10
19
A1260B SOP 8.6 × 18 A1257B SOP 11 × 21 A1259B SOP 13 × 28 A1185B TSOL 13 × 10 A1186B TSOL 18 × 10
11.7
21
10
29
19
18.5
PLCC
A1188B PLCC 9 × 9 A1140B PLCC 11.5 × 11.5 A1141B PLCC 11.5 × 14 A1139B PLCC 12.5 × 7.3 A1135B PLCC 17.5 × 17.5
(20 pins) (28 pins) (32 pins) (18 pins) (44 pins)
10
A: 11 A: 13 A: 15 A: 9 A: 18.5
10
15
6.9
15
B: 11 B: 13 B: 13 B: 14 B: 18.5
10 6.9 15
10 10
A: 21 A: 26 A: 31 A: 36.5
33.5
29
24
19
B: 21 B: 26 B: 31 B: 36.5
19 24 29 33.5
50
Desoldering and Rework
SOJ
19
16
12 8
10
BGA
A1470 BGA 8 × 8 A1471 BGA 12 × 12 A1472 BGA 13 × 13 A1473 BGA 15 × 15 A1474 BGA 18 × 18
19
16
13
9
14
9 13 16 19
14
39
28
41
28 36 39 41
Single
A1124B* Single 2.5 A1130* Single 4.4 A1142B* Bent Single A1190* A1325*
1.5 × 3 Dual Single 2.5 × 9.5 Dual Single ø1.5 × 5 to 10
Adjustable Pitch
10
5
) .D)
(I. 5 (I
ø3 ø1.
5 10
SIP
26
52.5
51
Preheater
Preheater Analog
LEAD
FREE
• Compact pre-heater best suited for heat
processing on localized areas
• Featuring quick heatup and less variations in
temperature
0
0 100 200 300 400 500
Option
Time (sec.)
Part No. Name Specifications
Test criteria
B3263 Extension pipe With lid
Temperature measured using sensors
Measurement method mounted on both the top and bottom surfaces B2763 Hand switch –
of the P.W.B. B1649 Foot switch –
Distance between air outlet
10 mm
and P.W.B.
Temperature setting 300°C
52
SMD Rework Station
Features Specifications
Model No. C1392B C1390C C1391B
No.C1392B
305 (W) ×
• Smooth vertical motion Dimensions – ø57 × 88 mm 64 (H) ×
140 (D) mm
• The handpiece may be
Weight 4.6 kg 1.2 kg (1 pc) 0.87 kg
easily installed or
removed from the
clamp. Dimensional drawing for C1392B
• Easy to position
Adjustment nut
Handpiece clamp
Collar
Knob
33.5
mm
302 mm
No.C1391B
53
Rework System
・Desoldering Gun
Power consumption 50 W (24 V)
Nozzle to ground resistance <2 Ω
Nozzle to ground potential <2 mV
Heating element Ceramic heater
Standard nozzle ø1.0 mm S type (No. A1003)
Cord length 1.2 m
Dimensions** 135 (W) × 174 (H) mm
Weight** 200 g
Smoke Absorber
Desktop Type Smoke Absorber
Specifications
Model No. FA-400
50 Hz: 15 W (100 V), 18W (110 V), 19 W (220 V),
22 W (230 V), 24 W (240 V)
Power consumption
60 Hz: 13 W (100 V), 15 W (110 V), 19 W (120 V),
16W (220 V), 18W (230 V), 19 W (240 V)
Using a stand:
50 Hz: 48 dB
Noise level*
60 Hz: 51 dB
Vertically: 1.0 m3/min. (50 Hz), 1.1 m3/min. (60 Hz)
Max. suction capacity**
Horizontally: 0.4 m3/min. (50 Hz), 0.5 m3/min. (60 Hz)
Vertically: 1.0 m/s (50 Hz), 1.1 m/s (60 Hz)
Air velocity
Horizontally: 2.6 m/s (50 Hz), 2.9 m/s (60 Hz)
Filter size 130 (W) × 130 (H) × 10 (D) mm
Dimensions 166 (W) × 212 (H) × 113 (D) mm
Weight*** 0.91 kg
* Measured at a distance of 1 m from the face of the unit
** Measured with a filter present
*** Without cord
Option
Part No. Name Specifications
C1568 Arm stand With knobs
55
Smoke Absorber
Specifications
Model No. FA-430
Power consumption 120 W
Noise level* 50 dB
Max. suction With single duct: Max. 4.1 m3/min. (145 cFm)
capacity With two ducts: Max. 4.7 m3/min. (167 cFm)
99.97% 0.3 μm (LOW or MEDIUM mode)
Filtering efficiency**
99.96% 0.3 μm (HIGH mode)
Static pressure 1500 Pa
No.C1571 No.C1572
Duct set (sold separately)*** Duct length: ø55 mm × 1.2 m (ESD safe)
Dimensions 330 (W) × 366 (H) × 343 (D) mm
Weight**** 7.5 kg
* Measured at a distance of 1 m from the face of the unit in an anechoic room.
** An initial value of the collection efficiency based on a counting method for airborne
dust collected by a single plate of filter (unfolded)
*** Nets in duct sets are not protected against electrostatic discharge.
**** Without cord
56
Smoke Absorber
Features
Quiet operation and powerful suction Flexible ducts and compact body for perfect placement
Noise level Air volume
6
60
60
5
55 4.7
53 4
50 3.7
50 3
3.2
45 2.8
44 2
40
1
35
0
30 Air volume
Noise level High Medium Low Previous model m3/min
dB(A)
HAKKO FA-430 HAKKO 421
Quiet office = 50 dB
Basic noise level guide Ringing telephone, noisy street, or office = 70 dB
Pre-filter
Indicator
for pre-filter
HEPA filter (main filter)
Indicator for
main filter * An initial value of the collection
efficiency based on a counting
method for airborne dust collected
by a single plate of filter (unfolded) 0.3 µm
particles
Removes
Control panel 99.97%
of 0.3 µm particles
Solder smoke
Powdered milk
Viruses Bacteria
57
Smoke Absorber
58
Static Control
Static Control
Wrist Strap
Cord helper
Wrist Strap
Packing List
Specifications
Part No. 496B 496R 496G
Color Blue Red Green
Grounding wire 2m
59
Soldering Iron Thermometer/Tester
Tip-to-ground resistance
Most leak current flows from the tip via the ground wire to
the outlet ground terminal, and is prevented from affecting
the device. Because of this, tip-to-ground resistance is
another important issue that must be checked daily.
60
Meter / Tester
Common features of FG-100 and FG-101 Packing List
Dimensional measurement Unit, 006P 9 V Manganese dry battery (for trial),
FG-100 Instruction manual, Sensor (10 pcs)
Specifications
Model No. FG-100
Power supply 006P 9 V dry battery
Temperature resolution 1ºC
Temperature
0 to 700ºC
measurement range
±3ºC (300 to 600ºC)
*Design image only Temperature precision
±5ºC (other than above)
MAX HOLD function Temperature sensor K (CA) type thermocouple
When the “MAX HOLD” button is pressed, “MAX HOLD” is Besides measured temperatures, display
displayed and the highest tip temperature is held on the indications include the following:
display. Burnout
Display* Battery low alarm
alarm
MAX HOLD
“MAX HOLD” is displayed in the lower right of
the LCD.
Operating environment 0 to 40ºC, 20 to 90%RH (without condensation)
Applicable rated pollution degree 2
Environmental conditions
(according to IEC/UL 61010-1)
Dimensions** 68 (W) × 140 (H) × 38 (D) mm
Weight*** 115 g
* When the battery low alarm appears, be sure to replace the battery. Failure to do so will
result in incorrect temperature measurements.
** Excluding protrusions
*** Excluding battery
61
Tester
Specifications
Model No. 498
Power supply 006P 9 V dry battery
Indication: LOW R < 800 kΩ
Indication: GOOD 800 kΩ ≤ R ≤ 9 MΩ
Indication: HIGH R > 9 MΩ
Battery life Approx. 50,000 times
Grounding wire 2.5 m
Operating environment 0 to 40ºC, 20 to 90%RH (without condensation)
Dimensions 80 (W) × 40 (H) × 117 (D) mm
Weight* 150 g
* Including battery
62
HEAD OFFICE
4-5, SHIOKUSA 2-CHOME, NANIWA-KU, OSAKA, 556-0024 JAPAN
TEL: +81-6-6561-3225 FAX: +81-6-6561-8466
http://www.hakko.com E-mail: sales@hakko.com
Please access to the following address for the other Sales affiliates.
http://www.hakko.com
CA00421EbNb001 2013.10