Professional Documents
Culture Documents
Sikagard®-705 L: Product Data Sheet
Sikagard®-705 L: Product Data Sheet
Sikagard®-705 L: Product Data Sheet
Sikagard®-705 L
SILANE BASED REACTIVE WATER REPELLENT IMPREGNATION.
1/4
PRODUCT INFORMATION
Composition Alkoxy silanes (99 % active ingredient)
Packaging 25 L pail and 200 L drum.
Appearance / Colour Water like liquid, colourless.
Shelf life 24 months from date of production
Storage conditions Store in original, unopened, sealed and undamaged packaging in dry condi-
tion at temperatures between +5°C and +30°C. Protect from moisture and
direct sunlight.
Density ~0.900 kg/l (+25 °C)
Volatile organic compound (VOC) con- ~327 g/l (ASTM D 3960)
tent
Viscosity ~9 mm²/s (25 °C)
TECHNICAL INFORMATION
Resistance to Alkalinity Comply (EN 13580)
Permeability to Water Vapour 40 x 103 s/m (Requirement of BRO 2002: < 200 x 103 s/m) (EN ISO 12 572)
Chloride Ion Diffusion Resistance Control (CEM II/A-LL 42.5 13.1 x 10-12 m2/s (SIA 262/1)
N; W/C = 0.53)
Treated with Sikagard®- 1.2 x 10-12 m2/s
705 L
Control (CEM III/B 42.5 N; 0.9 x 10-12 m2/s
W/C = 0.45)
Treated with Sikagard®- 0.6 x 10-12 m2/s
705 L
SYSTEMS
System Structure 2 to 3 coats either as stand alone or combined with surface applied corro-
sion inhibitor and/or protective coating.
APPLICATION INFORMATION
Consumption Dependent on absorbency of the substrate as well as the required penetra-
tion depth: ~ 150 g/m2 per coat.
Ambient Air Temperature +5 °C min. / +35 °C max.
Dew Point 3 °C above dew point
Substrate Temperature +5 °C min. / +40 °C max.
Substrate Moisture Content < 5 - 6 % when measured with Tramex or equivalent.
2/4
Waiting Time / Overcoating Can be overcoated with water and solvent based polymer paint - contact
the proposed paint manufacturer for recommendations.
Sikagard®-705 L can be used as a water repellent primer under many Sik-
agard® protective coatings inclusive of water based dispersion. Penetra-
tion of water is thus prevented at possible weak spots or in the event of
damage to the top coat and the risk of consequential damages such as
paint flaking can be reduced.
Waiting time: minimum 5 hours, maximum 1 week.
Curing Treatment Sikagard®-705 L does not require any special curing but must be protected
from rain for at least 4 hours at +20 °C.
3/4
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
Sikagard-705L-en-AE-(10-2017)-3-1.pdf
4/4