Professional Documents
Culture Documents
Bill of Quantity Items: Current Tender Details
Bill of Quantity Items: Current Tender Details
Bid Submission Closing Date 02/08/2022 04:30 PM Tender Evaluation Type Percentage
https://tender.apeprocurement.gov.in/BoqItems.html# 1/5
7/29/22, 12:23 PM e Procurement
Labour charges for Slotter cutting to 180 mm dia PVC 6 Kg/Cm2 including CP @ 13.615%
5 RWS S Dept., 1.00 1No 1477.00 1477.00
Towards conducting Geologist site investigation survey charges including hirign of vehicle from Nellore work spot and viceversa and labour charges etc complete including CP @ 13.615%
6 RWS S Dept., 1.00 1No 42179.57 42180.00
Supply and Transportation of 5.00 HP 5 Star rated
Submersible motor pumpset, confirming to IS 8034 and
motor confirming to IS 9283 with water proof winding,Pump
shall be suitable for various delivery head
and discharge
with stainless steel shaft.Motor suitable for working on
415V ± 10% , Three Phase 50 Hz AC supply,etc complete
for 6" Bore well. - 5.00HP, 5-10Stage - ELEC-5.4.5 (b)
Makes: Kirloskar / Crompton /
Texmo / CRI / KSB/Lubi/
PSG/Aryen Varsha including CP % 13.615%
7 RWS S Dept., 1.00 1No 9998.12 9998.00
Fabrication ,transportationand and supply of wall mounted
Control panel board of size 600x600x250mm made of 18
SWG CRCA sheet steel enclosure, 14 SWG mounting
plate for cable entry fabricated , painted
with two coats of
Red oxide primer and two coats of Grey paint, lock and key
arrangements two side lovures with weld mesh inside etc.,
complete consisting of the following equipment with all
internal wiring
using L&T / Finolex copper FRLS cables of
suitable size and capacity and cable clamp etc complete
for 3 phase motor pump sets - .ELEC-5.4.17 (b)
Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S /
SALZAR
/ HPL/ AEI / Meco / Rishab - 1No
0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size).
Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1 No
Single phase preventor of suitable range
Makes: L&T /
Minilec / Powertec. - 1No.
32 A TP, 10KA MCB.
Makes: Legrand / Schneider / - 1No
Indication lamps (R-Y-B) with switch control - 1set
Voltmeter & Ammeter selector switch - 2 Nos
Supply and fixing of ISI Mark
suitable capacitor Makes:
L&T / Siemens / Schneider / Epcos/Havells.
Upto 7.5 HP with DOL Starter of.
Make C&S.Crompton / L&T / Siemens/BCH.
8 RWS S Dept., 270.00 1RM 22.72 6134.00
Cost and supply of 7/16 Alluminium service wire of standard make including CP @ 13.615%
9 RWS S Dept., 80.00 1RM 163.61 13089.00
Cost and supply of PVC insulated and PVC sheathed, flexible 3 core flat type cable 4.00 Sqmm for submersible pumpsets,conductors composed of annealed high conductivity copper wire, confirming to IS 694 &
its revisions and amendments from time to time delivery at site of installation of pumpsetincluding CP @ 13.615%
10 RWS S Dept., 48.00 1RM 519.22 24923.00
Supply of Galvanised Mild steel pipes (Medium class of 50 mm dia nominal bore) confirming to IS 1239 / Part I /1990 continuously welded ERW / HFIW type and screwed at both ends as per IS 554 one end with
socket (Heavy class) as per IS 1239 / Part II / 1992 and other fitted with plastic ring and delivery in small quanities at work site of pump installation with replacement guarentee for a period of six months on
installation for exact length of 3 metres + 5% including cost and conveyance, excise duty and sales tax etc., complete including CP @ 13.615%
11 RWS S Dept., 16.00 1 no 159.06 2545.00
Cost and supply of 50 mm dia GI heavy Coupling including CP @ 13.615%
12 RWS S Dept., 1.00 1 no 340.85 341.00
Cost and supply of 50 mm dia GI Bend including CP @ 13.615%
13 RWS S Dept., 1.00 1 no 1363.38 1363.00
Cost and supply of 50 mm dia CI Non return valve including transportation charges and CP @ 13.615%
14 RWS S Dept., 2.00 1No 340.85 682.00
Cost and supply of 50 mm dia MS Flangeset including CP @ 13.615%
15 RWS S Dept., 2.00 1No 653.29 1307.00
Cost and supply of 50 mm dia MS Clampset including CP @ 13.615%
16 RWS S Dept., 1.00 1No 357.89 358.00
Cost and supply and fixing of 180mm dia PVC Bore Cover including CP @ 13.615%
https://tender.apeprocurement.gov.in/BoqItems.html# 2/5
7/29/22, 12:23 PM e Procurement
Supplying, fitting and placing HYSD bar reinforcement as per drawings and technical specifications, including overlaps and wastage, where they are not welded including cutting, bending, placing in postion
tying grills including cost of binding wire etc., complete
28 RWS S Dept., 1.80 1Cum 1190.44 2143.00
RCC M-20 Nominal mix (Cement : fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc to site and including seignourages charges, sales and other taxes on all materials including all
operational and labour charges such as machine mixing, laying concrete, curing etc., complete including cost of steel and its fabrication charges for finished item of work, including centering, shutteing for
Precast top slab including CP @ 13.615 %
29 RWS S Dept., 12.79 10 Sqm 1416.00 1811.00
Painting with Snowcem or other equal and approved water proof cement paint over primary coat (all colours)
30 RWS S Dept., 20.00 1 Kg 126.11 2522.00
Supply and fixing of MS welded grill gate of size 0.60 x 0.70 M including cost and conveyanceof all materials, labour charges and fabrication charges etc complete
31 RWS S Dept., 500.00 1RM 364.30 182150.00
Providing 75mm dia, 6Kg/Cm2 HDPE PE-100 grade pipes as per IS Specifications, with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc.,
lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation of 0.70 x 1.00 mts . Earth work exvacation in all soils upto SDR using 2/3rd machinery and 1/3rd manual for pipelines
in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the
pipeline with water and testing etc., complete as specified in Technical specifications (Part-B-Volume-I) and as per drawing (Part C-Volume-1). The rates are inclusive of cost and conveyance of all materials and
labour charges for finished item of pipeline work , including Overheads and contractors profit @ 13.615% and excluding GST.
32 RWS S Dept., 250.00 1RM 443.80 110950.00
Providing 90 mm dia, 6Kg/Cm2 HDPE PE-100 grade pipes as per IS Specifications, with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc.,
lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation of 0.70 x 1.00 mts . Earth work exvacation in all soils upto SDR using 2/3rd machinery and 1/3rd manual for pipelines
in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the
pipeline with water and testing etc., complete as specified in Technical specifications (Part-B-Volume-I) and as per drawing (Part C-Volume-1). The rates are inclusive of cost and conveyance of all materials and
labour charges for finished item of pipeline work , including Overheads and contractors profit @ 13.615% and excluding GST.
33 RWS S Dept., 3.68 1Cum 3167.59 11657.00
Cutting of open CC road surface with concrete saw cutter and removal with Breaker including CP @ 13.615%
34 RWS S Dept., 3.68 1Cum 7707.80 28365.00
CC road BCC M20 with 20 mm HBG metal including cost and conveyance of all materials and labour charges etc., complwete for relaying of CC cutting portion including CP @ 13.615%
35 RWS S Dept., 32.00 1 no 677.97 21695.00
Supply and fixing of House service connections (PP Saddle) PP Clam saddles - PP clamp Saddles shall be manufactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water
works purposes and designed for use with PVC / PE pipe as per IS4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue / Black moulded in with Nickle
plated Brass / SS 304 metal female threaded outlets. Seal shall be thermo plasticelastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clampsaddle fittings shall be moulded with SS
304/Nickle plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall confirm to IS-554 / ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place
and avoid leakage while pressure aaplications. Fasteners shall be threaded type, with SS. Fasteners of sie 125 mm and above. The arade of raw material used must be certified by WRAS, UK for typetest as per BS
6920 from their certified laboratories like NSF International Ltd. UK and certificate of compliance to be produced for the follwoing parameters: i) Odour & Flavour of water, ii) Appearance of water, iii) Growth of
Micro Organism, iv) Extaction of substances that may be of concern to public health (Cyto toxicity), v) Extraction of metals (as per SoR 21-22) excluding GST
36 RWS S Dept., 32.00 1 no 265.00 8480.00
https://tender.apeprocurement.gov.in/BoqItems.html# 4/5
7/29/22, 12:23 PM e Procurement
Cost and supply of tamer proof house hold Non return cum Flow control valve (with all three parts made by using solid steel bars of SS 319) with CNC machine make and of 15 mm dia designed for 5 LPM
discharge @ 0.5 bar pressure loss, not excedding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEO manual) including cost of materials, manufacturing, loading, unloadin, stacking,
transit insurance, transportation but excluding GST
37 RWS S Dept., 64.00 1 no 139.83 8949.00
Cost, Supply and fixing of compression fittings shall comply with ISO 17885 2015, PN-16 rating and manufacture from virgin resin of PE-80 having blue colour. Raw material must be WRAS approved as per BS
6920 for effect on water quality intended for human consumption. Compression fittings should have moulded in SS 304 threaeded insert outlet with thread dimension conforming to IS 554/IS07. The cost shall
include testing of all materials, labour all taxes (central and state) inspection charges, transportation up to site, transit insurance, loading, uploading, stacking and fixing etc complete as specified and directed by
the department engineer incharge excluding GST Compression male / female threaded adaptor with SS insert D20 mmx 1/2"
38 RWS S Dept., 96.00 1RM 27.00 2592.00
Manufacture, Supply and delivery of 20 mm dia OD 16 Kg/Cm2 HDPE pipe confirming to IS 4984 - 2016 of PE-100 grade material along with all fittings, including cost of materials, manufacturing, loading,
unloading, stacking, transit insurance, transportation but excluding GST
39 RWS S Dept., 96.00 1RM 35.00 3360.00
Laying, Jointing of 20 mm dia HDPE pipes including trench excavation up to 0.5 mts depth including testing, refilling etc., complete
40 RWS S Dept., 44.80 1RM 188.00 8422.00
Cost and supply of 15 mm dia GI Pipe Medium Grade properties and weight as per IS 12391 ISI mark with GI Gittings including the cost of pipe and its fittings, labour charges etc complete excluding GST
41 RWS S Dept., 32.00 1 no 210.00 6720.00
Supply and fixing of 12.7 mm brass bib cock (long body) Indian make heavy duty excluding GST
42 RWS S Dept., 32.00 1 no 256.22 8199.00
Add Contractor Profit @ 13.615% for Serial Nos 33 to 40
Total(INR): 954844
Back Print
Number of Records per Page :
80
https://tender.apeprocurement.gov.in/BoqItems.html# 5/5