Professional Documents
Culture Documents
ZM9325Installation Manual of Edging Machine
ZM9325Installation Manual of Edging Machine
Instructions
佛山市顺德区正意玻璃机械有限公司
Foshan Shunde Zhengyi Glass Machinery Co.,Ltd.
地址:中国广东省佛山市顺德区伦教工业大道 3 号
Add:No.3 Lunjiao Industrial Road,Lunjiao,Shunde,Foshan,China.
全球售后服务热线(Tel):+86-757-27335268
E-mail:zhengyisales@163.com
Http:// www.zhengyi.cc
Contents
三、Operation··································································································6
五、Electric system··························································································8
六、Warranty instructions··················································································9
www.zhengyi.cc - 1 -
一、Main usage and main specification
The ZM9325 series glass straight line edging machine is suitable for different size and thickness flat glass grinding, it can
rough grinding、fine grinding and polishing finish in one time; the polishing flat is similar to the smooth degree of glass
body, While adjusting the different processing thickness,(you can reference the digital display in front beam to adjust);
front chamfer motor can move synchronically with front beam; with advanced structure; high precision,easy operation. It
is the necessary tool for glass machinery.
Model
7 7
6 5 9 8
Control Panel:
1. Voltmeter
2. Power indicator
3. Wheel ammeter
4. Motor overload warning indicator;
www.zhengyi.cc - 2 -
5. Transmission starter button;
6. Drive reversing switch;
7. Emergency stop button;
8. Water pump start button;
9. Motor start button;
Electric box
Input guide
Output guide
Machine body
www.zhengyi.cc - 3 -
The level of glass support frame is by adjusting two ‘adjusting screw’ in right and left frame, and machine
body horn to assurance (see Figure 9): firstly to loose the ‘locking nut’, that adjusting the ’adjusting
screw’, lastly tighten the‘locking nut’ after it adjusts level.
The level adjusting of transfer guide: firstly to loose the ‘locking nut’, that adjusting the ’adjusting screw’
to reach transfer guide level, lastly tighten the‘locking nut’ after finishing adjusting(see Figure 10).
三、Operation
Turn on the power, connect water pump into water pumps power outlet, start the machine need
according to the following procedure:
Turn on the power, the power indicator light.
Press the water pumps start button, start the pump, check the waterway.
www.zhengyi.cc - 4 -
Press the motor start button to start the 11pcs grinding motor
Press the transmission start button, machine start running.
Put the glass on guide,glass begin processing.
Check each motor ammeter case, when the glass coming, appropriate adjust the handwheel of motor
seat, in order to adapt to different grinding volume requirement.
After finish processing, press the emergency stop button to stop the machine.
Note:
1) Feed speed adjustment, you must adjust the hand wheel on the CVT during operation, avoid
downtime when adjustment.
1) Before you turn on the machine,in addition to access to three-phase power supply in the power
supply terminals must access the zero line. The body grounding screw at a certain ground, so to ensure
the safe and normal operation.
(2) Maintenance:
Maintenance of motor. every 3 -4 months, removed the grinding head motor, replace the skeleton ring
and grease to bearings coated.
B. The maintenance of transmission chain. Every 3 to 4 months, need grease to drive chain, conditional
to remove the drive chain and remove the chain with kerosene soaked cleaning, reinstall smearing
grease.
五、Electric system:
www.zhengyi.cc - 5 -
www.zhengyi.cc - 6 -
www.zhengyi.cc - 7 -
www.zhengyi.cc - 8 -
www.zhengyi.cc - 9 -
六、Warranty instructions
All customers who buy our equipment through legal channels can enjoy six-month equipment warranty service from
the date purchase in condition of electrical parts, plastic parts and non-human cause’s failure.
We can provide paid maintenance service to all equipments which are not covered under warranty, and
can be repaired. Buyer is responsible for travel cost and local accommodation.
Final interpretation of this warranty contents is reserved to Foshan Shunde Zhengyi Glass Machinery
Co.,Ltd.
With the development of production technology, the company’s products will be made some
improvements. If customers purchase machines before improvement, the company will not update
customer’s manuals, also not notice.
品牌 型号
Brand Model
客户
Client
安装情况
Installation
Situation
故障情况
Malfunction
Situation
维修情况
Repair
Situation
更换部件
Components
Changed
收费合计 小 写
万 仟 佰 拾 元 角
Total Charge Lower Case
维修工程师签名 用户签名或盖章
Repair Engineer User Signature
Signature /Seal
www.zhengyi.cc - 10 -