Professional Documents
Culture Documents
LCD TV: User Manual
LCD TV: User Manual
Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.
Country
Web Site
Address
Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronique Canada Inc., Service la Clientle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511
CANADA
1-800-SAMSUNG(726-7864)
www.samsung.com/ca
U.S.A
1-800-SAMSUNG(726-7864)
www.samsung.com
user manual
LCD TV
www.samsung.com/global/register
Model Serial No.
BN68-01514B-00
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the brightness and contrast when displaying still images.
2008 Samsung Electronics Co., Ltd. All rights reserved.
English
Contents
GENERAL INFORMATION
List of Features............................................................................. 2 Accessories .................................................................................. 2 Viewing the Control Panel ........................................................... 3 Viewing the Connection Panel .................................................... 4 Remote Control ............................................................................ 5 Installing Batteries in the Remote Control .................................... 6
PC DISPLAY
Using Your TV as a Computer (PC) Display............................... 34 Display Modes ............................................................................ 34 Setting up the TV with your PC .................................................. 35
TIME SETTING
Setting the Clock ........................................................................ 37
CONNECTIONS
Connecting VHF and UHF Antennas............................................ 6 Connecting Cable TV ................................................................... 7 Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI................................................................ 8 Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI ................................................................... 8 Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables ........................................... 9 Connecting a Camcorder ............................................................ 9 Connecting a VCR...................................................................... 10 Connecting a Digital Audio System ............................................ 11 Connecting an Amplifier/DVD Home Theater ............................. 11 Connecting a PC ........................................................................ 12
FUNCTION DESCRIPTION
Selecting a Menu Language....................................................... 40 Using the V-Chip ........................................................................ 41 Viewing Closed Captions (On-Screen Text Messages) - Analog ...... 48 Viewing Closed Captions (On-Screen Text Messages) - Digital....... 49 Adjusting the TV On/Off Melody Sound...................................... 50 Using the Energy Saving Feature .............................................. 50 Upgrading the Software.............................................................. 51
APPENDIx
Troubleshooting .......................................................................... 52 Installing the Stand ..................................................................... 54 Disconnecting the Stand ............................................................ 54 Auto Wall-Mount Adjustment (Sold separately) (LN32A330J1D, LN37A330J1D, LN40A330J1D)............................ 55 Wall Mount Kit Specifications (VESA) ........................................ 56 Using the Anti-Theft Kensington Lock ........................................ 57 Specifications ............................................................................. 58 Dimensions................................................................................. 59
OPERATION
Turning the TV On and Off ......................................................... 13 Plug & Play Feature ................................................................... 13 Changing Channels .................................................................... 14 Adjusting the Volume.................................................................. 15 Viewing the Display .................................................................... 15 Viewing the Menus ..................................................................... 15 Using the TOOLS Button ............................................................ 16 Memorizing the Channels........................................................... 16 To Select the Source .................................................................. 18 To Edit the Input Source Name .................................................. 18
PICTURE CONTROL
Changing the Picture Standard .................................................. 19 Customizing the Picture Settings ............................................... 19 Configuring Picture Options ....................................................... 20 Resetting the Picture Settings to the Factory Defaults ............... 23
SOUND CONTROL
Changing the Sound Standard ................................................... 24 Customizing the Sound .............................................................. 24 Setting the TruSurround XT........................................................ 25 Choosing a Multi-Channel Sound (MTS) track - Digital ............. 25 Choosing a Multi-Channel Sound (MTS) track - Analog ............ 26 Automatic Volume Control .......................................................... 26 Setting the TV Speakers On/Off ................................................. 27
CHANNEL CONTROL
Clearing Scrambled Channels - Digital ...................................... 28 Adding and Erasing Channels .................................................... 29 To Set-Up Your Favorite Channels ............................................. 30 Viewing the Channel Lists .......................................................... 31 Labeling Channels...................................................................... 32 Fine Tuning Analog Channels .................................................... 33 Checking the Digital-Signal Strength.......................................... 33
Symbol
Press
Note
One-Touch Button
English - 1
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Owners Instructions
Warranty Card / Registration Card / Safety Guide Manual (Not available in all locations)
The items color and shape may vary depending on the model.
English - 2
1 2
The product color and shape may vary depending on the model.
1 SOURCE Toggles between all the available input sources (TV, AV, Component1, Component2, PC, HDMI1, HDMI2). In the on-screen menu, use this button as you would use the ENTER button on the remote control. 2 MENU Press to see an on-screen menu of your TVs features. 3 + VOL Press to increase or decrease the volume. In the on-screen menu, use the + VOL - buttons as you would use the and buttons on the remote control. 4 < CH > Press to change channels. In the on-screen menu, use the < CH > buttons as you would use the and buttons on the remote control.
5 SPEAKERS 6 (POWER) Press to turn the TV on and off. REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV. POWER INDICATOR Blinks and turns off when the power is on and lights up in stand-by mode.
English -
The product color and shape may vary depending on the model.
1 AUDIO OUT Connects to the audio input jacks on your Amplifier/ Home theater. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 PC IN [PC] / [AUDIO] Connects to the video and audio output jacks on your PC. 4 HDMI IN 1, 2 / DVI IN(HDMI2)[R-AUDIO-L] Connects to the HDMI jack of a device with an HDMI output. Use the HDMI IN 2 jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection and the DVI IN (HDMI2) [R-AUDIO-L] jacks for audio. - No sound connection is needed for an HDMI to HDMI connection. - When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. 5 ANT IN Connects to an antenna or cable TV system. 6 POWER INPUT Connects the supplied power cord.
7 SERVICE Connector for SERVICE only. 8 COMPONENT IN 1, 2 / AV 1 The COMPONENT IN 1 jack is also used as the AV IN 1 jack. - Connect the video cable to the COMPONENT IN 1 [Y/ VIDEO] jack and the audio cable to the COMPONENT IN 1 [R-AUDIO-L] jacks. 9 Ex-LINK - LN26A0J1D Connector for SERVICE only. - LN2A0J1D / LN7A0J1D / LN40A0J1D Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control. 0 KENSINGTON LOCK The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV. The location of the Kensington Lock may be different depending on its model.
English - 4
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 Press to select additional channels(digital and analog) being broadcast by the same station. For example, to select channel 54-3, press 54, then press and 3. 5 (MUTE) Press to temporarily cut off the sound. 6 VOL / VOL Press to increase or decrease the volume. 7 TOOLS Use to quickly select frequently used functions. 8 UP / DOWN / LEFT / RIGHT / ENTER Use to select on-screen menu items and change menu values. 9 INFO Press to display information on the TV screen. 0 COLOR BUTTONS Use these buttons in the Channel list, etc. ! CC Controls the caption decoder. @ MTS Press to choose stereo, mono or Separate Audio Program (SAP broadcast). # SOURCE Press to display and select the available video sources. $ PRE CH Tunes to the previous channel. % CH / CH Press to change channels. ^ RETURN Returns to the previous menu. & ExIT Press to exit the menu. * SRS Selects SRS TruSurround XT mode. ( MENU Displays the main on-screen menu. ) FAV.CH Press to switch to your favorite channels. a P.SIZE Picture size selection.
English -
If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75 Round Leads". If you have two antennas, see "Separate VHF and UHF Antennas". Antennas with 300 Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 twin flat leads, follow the directions below. 1. Place the wires from the twin leads under the screws on a 300-75 adapter (not supplied). Use a screwdriver to tighten the screws. 2. Plug the adaptor into the ANT IN terminal on the back of the TV.
ANT IN
Antennas with 75 Round Leads 1. Plug the antenna lead into the ANT IN terminal on the back of the TV.
ANT IN
Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1. Connect both antenna leads to the combiner.
UHF VHF
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.
ANT IN
UHF VHF
English - 6
Connecting Cable TV
To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT IN terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
ANT IN
Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
ANT IN ANT OUT
2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.
ANT IN
Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.) 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN".
ANT IN
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
Incoming cable
4. Connect an RF cable between the ANT OUT terminal on the cable box and the BIN terminal on the RF(A/B) switch.
Incoming cable
RF (A/B) Switch
5. Connect another cable between the other OUT terminal on the splitter and the AIN terminal on the RF (A/B) switch. 6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.
Incoming cable
RF (A/B) Switch
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable boxs output channel, which is usually channel 3 or 4.)
English - 7
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable between the HDMI IN (1 or 2) jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
DVD Player or Cable Box/Satellite receiver (Set-Top Box) Rear Panel TV Rear Panel
What is HDMI? HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable. The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output connector on the external device. 1. onnect a DVI to HDMI Cable C or DVI-HDMI Adapter between the HDMI IN 2 jack on the TV and the DVI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
TV Rear Panel
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
English - 8
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. Connect a Component Cable TV Rear Panel between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT DVD Player or Cable Box / Satellite receiver (Set-Top Box) [Y, PB, PR] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). 2. onnect Audio Cables between C the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting a Component video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
Connecting a Camcorder
They allow you to view the camcorder tapes without using a VCR. 1. Connect a Video Cable between the AV IN 1 [Y/ VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder. 2. Connect Audio Cables between the AV IN 1 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.
TV Rear Panel
Camcorder
Each Camcorder has a different back panel configuration. When connecting a Camcorder, match the color of the connection terminal to the cable. When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
English -
Connecting a VCR
Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system. U 1. nplug the cable or antenna from the back of the TV. 2. onnect the cable or antenna to C the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. 4. onnect a Video Cable C between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] jack on the TV. 5. onnect Audio Cables C between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV. If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCRis stereo, you mustm connect two cables.
VCR Rear Panel
ANT IN
TV Rear Panel
Audio Cable (Not supplied) 4 Video Cable (Not supplied) RF Cable (Not supplied)
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
English - 10
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH. Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TVs Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.
Each Amplifier/DVD Home Theater has a different back panel configuration. When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
English - 11
Connecting a PC
Using the D-Sub Cable 1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. C 2. onnect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
2 PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) TV Rear Panel PC
Using the HDMI/DVI Cable 1. Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer. C 2. onnect a 3.5 mm Stereo mini-plug/2RCA Cable between the DVI IN(HDMI2) [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer.
PC TV Rear Panel
2 . mm Stereo mini-plug/2RCA Cable (Not supplied) 1 HDMI/DVI Cable (Not supplied)
Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
English - 12
Start
Enter
Plug & Play Select Home Use when installing this TV in your home.
Store Demo
Home Use
Move
Enter
Plug & Play Select the antennas to memorize. Air Cable Auto
4. Press the or button to memorize the channels of the selected connection. Press the ENTER button to select Start. Air: Air antenna signal. Cable: Cable antenna signal. Auto: Air and Cable antenna signals. In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the , , or button, then press the ENTER button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
Start
digital
Move
Enter
Skip
Plug & Play Auto Program Auto Program in Progress. DTV Air : 02 Air : 11 DTV Cable : 2 Cable : 21
Cable 0 0 %
Skip
5. The TV will begin memorizing all of the available channels. To stop the search before it has finished, press the ENTER selected. button with Stop
Stop
Enter
After all the available channels are stored, it starts to remove scrambled channels (see page 28). The Auto program menu then reappears. Press the ENTER button when channel memorization is complete. The message Set the Clock Mode. is displayed.
Plug & Play Auto Program Removing scrambled channel. DTV Cable 41 77 %
Stop
Enter Skip
English - 1
Auto Program Plug & Play Auto Program is completed. 7 Channels are memorized. DTV Air : 24 Air : 1 DTV Cable : 17 Cable :
OK
6. Press the ENTER button. Press the or button to select Auto, then Press the ENTER The message Set to daylight saving time. is displayed. If you select Manual, Enter the current date and time. is displayed. (See page 37)
Enter
Skip
button.
Move
Enter
Skip
7. Press the or button to select Off or On, then press the ENTER The message Select the time zone in which you live. is displayed.
button.
Move
Enter
Skip
8. Press the or button to highlight the time zone for your local area. Press the ENTER button. If you have received a digital signal, the time will be set automatically. If not, see page 37 to set the clock.
Plug & Play Select the time zone in which you live.
Newfoundland Atlantic Eastern Central Mountain Pacific Alaska Hawaii
Move
Enter
Skip
9. The message Enjoy your watching. is displayed. When you have finished, press the ENTER button.
OK
If you want to reset this feature... 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER 2. Press the ENTER button again to select Plug & Play. For further details on setting up options, refer to the pages 13~14. The Plug & Play feature is only available in the TV mode. button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move
Enter
Setup
: English Return
Changing Channels
Using the Channel Buttons 1. Press the CH or CH button to change channels. When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 16 to memorize channels. Using the Number Buttons 1. Press the number buttons to go directly to a channel. For example, to select channel 27, press 2, then 7. For quick channel change, press the number buttons, then press the ENTER button.
English - 14
Button , then 1.
button is used to select stations that broadcast a digital signal. HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. For quick channel change, press the number buttons, then press the ENTER button.
Using the PRE CH Button to select the Previous Channel 1. Press the PRE CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE CH button to quickly alternate between them.
Using the MUTE button At any time, you can cut off the sound using the MUTE button. 1. Press MUTE button and the sound cuts off. " " is displayed on the screen. 2. To turn mute off, press the MUTE button again or simply press the VOL or VOL button.
Picture
: Standard 7 4 0 0 R 0 Exit
Enter
English - 1
Tools
Standard : Custom : Off
Move
Adjust
Exit
2. Press the ENTER button to select Antenna. Press the or button to select Air or Cable, then press the ENTER Press the ExIT button to exit.
Move
Enter
Return
button.
TV
Channel
Antenna : Air Air Auto Program Cable Clear Scrambled Channel Channel List Name Fine Tune Signal Strength
Move
Enter
Return
Easy Setting 1. 2. Press the TOOLS button on the remote control. Press the or button to select Switch to Air (or Switch to Cable), then press the ENTER button.
Tools
Picture Mode Sound Mode Sleep Timer Add to Favorite Switch to Air : : Standard Custom Off
Move
Enter
Exit
English - 16
Storing Channels in Memory (Automatic Method) 1. Press the MENU button to display the menu. Press the or button to select Channel, then press the ENTER 2. Press the or button to select "Auto Program", then press the ENTER button. button.
TV Channel
Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength
Move
Enter
Return
3. Press the or button to select the antenna connection, then press the ENTER button. Air: Air antenna signal. Cable: Cable antenna signal. Auto: Air and Cable antenna signals.
TV
Auto Program
Selects the antenna to execute the Auto Program function.
Move Move
TV
Auto Program
Selects a cable signal type for your location.
STD HRC IRC STD HRC IRC
4. When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the or button, then press the or to select the correct analog signal cable system source among STD, HRC, and IRC. Press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
analog
Start
digital
Move Move
Enter Enter
Return Return
Auto Program Plug & Play Auto Program in Progress. DTV Cable : -Cable : 11 Cable 0 11 %
Stop
5. The TV begins memorizing all available stations. After all the available channels are stored, it start to remove scrambled channels(see page 28). If you want to stop Auto Programming, press the ENTER button. The Stop Auto Program? message will be displayed. Select Yes by pressing the or button, then press the ENTER button. Press the ExIT button to exit.
Enter
Return
Plug & Play Auto Program Removing scrambled channel. DTV Cable 40 11 %
Stop
Enter Return
Yes
Move Enter
No
Return
Auto Program Auto Program is completed. Channels are memorized. DTV Cable : 6, Cable : 4
OK
Enter Return
English - 17
TV
Source List Edit Name
Input
: TV
2. Press the ENTER button to select "Source List". Press the or button to select signal source, then press the ENTER
Available signal sources: TV, AV, Component1, Component2, PC, HDMI1, HDMI2. You can choose only those external devices that are connected to the TV.
Move
Enter
Return
Source List
: ---: ---: ---: ---: ---: ---Enter Return
Press the SOURCE button on the remote control to view an external signal source.
Input
: TV
Move
Enter
Return
2. Press the or button to select "AV", "Component1", "Component2", "PC", "HDMI1", "HDMI2" input jack, then press the ENTER button.
TV
AV Component1 Component2 PC HDMI1 HDMI2
Edit Name
: : : : : : ------------------
Move
Enter
Return
3. Press the or button to select VCR, DVD, Cable STB, Satellite STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV, IPTV, Blu-Ray, HD DVD, Digital Media Adapter input source, then press the ENTER button. Press the ExIT button to exit.
TV
AV Component1 Component2 PC HDMI1 HDMI2
Edit Name
: ---: ---- ---VCR : ---DVD : Cable STB ---: Satellite STB ---: PVR ---STB AV Receiver Game
Move
Enter
Return
English - 18
Picture
: Standard 7 4 0 0 R 0 Return
Enter
2. Press the ENTER button to select "Mode". Press the or button to select the Dynamic, Standard or Movie.
Dynamic: Selects the picture for high-definition in a bright room. Standard: Selects the picture for the optimum display in a normal environment. Movie: Selects the picture for viewing movies in a dark room.
TV
Mode Backlight Contrast Brightness Sharpness Color Tint G 0 More Move
Picture
: Standard Dynamic Standard Movie 7 4 0 0 R 0 Return
3. Press the ExIT button to exit. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the or button to select Picture Mode. 3. Press the or button to select the required option. 4. Press the ExIT or TOOLS button to exit.
Enter
Tools
Picture Mode Sound Mode Sleep Timer Add to Favorite Switch to Air Standard : Custom : Off
Move
Adjust
Exit
TV
Mode Backlight Contrast Brightness Sharpness Color Tint G 0 More Move
Picture
: Standard 7 4 0 0 R 0 Return
Enter
English - 1
TV
More Picture Options Reset
Picture
: OK
Move
Enter
Return
Setting the Color Tone 1. ollow the Activating Picture Options instructions numbers 1 and 2. (Refer to F page 20) 2. Press the or button to select Color Tone, then press the ENTER button. 3. Press the or button to select Cool2, Cool1, Normal, Warm1 or Warm2. button. Press the ENTER Warm1 or Warm2 is only activated when the picture mode is Movie. Settings can be adjusted and stored for each external device you have connected to an input of the TV.
TV
Picture Options
Color Tone : Normal Size : 16:9 Digital NR : Auto HDMI Black Level : Normal Film Mode : Off
Move
Enter
Return
TV
Picture Options
Color Tone : Cool1 Cool2 Cool1 Size : 16: Normal Digital NR : Auto Warm1 HDMI Black Level : Normal Warm2 Film Mode : Off
Move
Enter
Return
Setting the Screen Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible. F 1. ollow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 20) 2. Press the or button to select Size, then press the ENTER 3. Press the or button to select the screen format you want. button. Press the ENTER Press the ExIT button to exit. 16:: Sets the picture to 16:9 wide mode. Zoom1: Magnifies the size of the picture on the screen. Zoom2: Magnifies the size of the picture more than Zoom1. Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen. 4:: Sets the picture to 4:3 normal mode. Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i), Component (1080i) or DTV (1080i) signals are input. button.
Move Enter Return
TV
Picture Options
Color Tone : Normal Size : 16:9 Digital NR : Auto HDMI Black Level : Normal Film Mode : Off
TV
16 : Zoom1 Zoom2 Wide Fit 4: Just Scan
Size
Move
Enter
Return
English - 20
Temporary image retention may occur when viewing a static image on the set for more than two hours. After selecting Zoom1, Zoom2 or Wide Fit: Press the or button to select Position, then press the ENTER button. Press the or button to move the picture up and down. Reset: Press the or button to select Reset, then press the ENTER button. You can initialize the setting.
TV
16 : Zoom1 Zoom2 Wide Fit 4: Just Scan
Size
Position Reset
Adjust
Enter
Return
After selecting Just Scan in HDMI (1080i) or Component (1080i) mode: Press the or button to select H-Position or V-Position, then press the ENTER button. Press the or button to adjust the screen Position. Press the ENTER button. Reset: Press the or button to select Reset, then press the ENTER button. You can initialize the setting. HD (High Definition) 16:9 - 1080i (1920x1080), 720p (1280x720) Input Source TV, Video, Component (480i, 480p) DTV(1080i), Component (1080i), HDMI (720p, 1080i) PC change the picture size. Picture Size
TV
H-Position V-Position Reset
Just Scan
0 0
Move
Enter
Return
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
16:9, Zoom1, Zoom2, 4:3 16:9, 4:3, Wide Fit, Just Scan 16:9, 4:3
O Alternately, you can press the P.SIZE button on the remote control repeatedly to
16:
Zoom1 U Move
Zoom2 U Move
4:
Just Scan
Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen.
Just Scan Use the function to see the full image without any cutoff when HDMI (720p/1080i), Component (1080i) or DTV (1080i) signals are input.
English - 21
Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1. ollow the Activating Picture Options instructions numbers 1 and 2. F (Refer to page 20) 2. Press the or button to select "Digital NR", then press the ENTER button. 3. Press the or button to select "Off", "Low", "Medium", "High" or "Auto". Press the ENTER button. Off: Turns the screen noise reduction function off. Low: Reduces screen noise at a low level. Medium: Reduces screen noise at a medium level. High: Reduces screen noise at a high level. Auto: Automatically recognizes and reduces screen noise. Press the ExIT button to exit.
TV TV Picture Options
Color Tone : Normal Size : 16:9 Digital NR : Auto HDMI Black Level : Normal Film Mode : Off
Move
Enter
Return
Picture Options
Color Tone : Normal Size : 16: Digital NR : Auto Off Low HDMI Black Level : Normal Medium Film Mode : Off High Auto Move Enter Return
Setting the HDMI Black Level You can select the black level on the screen to adjust the screen depth. 1. ollow the Activating Picture Options instructions numbers 1 and 2. F (Refer to page 20) 2. Press the or button to select HDMI Black Level, then press the ENTER button. 3. Press the or button to select Normal or Low, then press the ENTER button. Normal: The screen gets brighter. Low: The screen gets darker. This function is active only when an external device is connected to the TV via HDMI. HDMI Black Level function may not be compatible with all external devices. Press the ExIT button to exit.
TV TV Picture Options
Color Tone : Normal Size : 16:9 Digital NR : Auto HDMI Black Level : Low Film Mode : Off
Move
Enter
Return
Picture Options
Color Tone : Normal Size : 16: Digital NR : Auto HDMI Black Level : Normal Normal Low Film Mode : Off
Move
Enter
Return
Setting the Film Mode The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1. ollow the Activating Picture Options instructions numbers 1 and 2. F (Refer to page 20) 2. Press the or button to select "Film Mode", then press the ENTER button.
TV Picture Options
Color Tone : Normal Size : 16:9 Digital NR : Auto HDMI Black Level : Normal Film Mode : Off
Move
Enter
Return
TV
Picture Options
Color Tone : Normal Size : 16: Digital NR : Auto HDMI Black Level : Normal Film Mode : Off Off Auto
3. Press the or button to select "Off" or "Auto", then press the ENTER Press the ExIT button to exit.
button.
Move
Enter
Return
English - 22
TV
More Picture Options Reset
Picture
: OK OK Cancel
English - 2
2. Press the ENTER button to select "Mode". Press the or button to select Standard, Music, Movie, Speech, or Custom sound setting, then press the ENTER button. Press the ExIT button to exit. Standard: selects the normal sound mode. Music: emphasizes music over voices. Movie: provides the best sound for movies Speech: emphasizes voice over other sounds. Custom: recalls your customized sound settings. (see Customizing the Sound)
Move
Enter
Return
TV
Sound
Mode : Custom Standard Equalizer Music SRS TruSurround xT : Off Movie Multi-Track Options Speech Auto Volume : Off Custom TV Speaker : On
Move
Enter
Return
Easy Setting 1. 2. 3. 4. Press the TOOLS button on the remote control. Press the or button to select Sound Mode. Press the or button to select the required option. Press the ExIT or TOOLS button to exit.
Tools
Picture Mode Sound Mode Sleep Timer Add to Favorite Switch to Air : Standard Custom : Off
Move
Adjust
Exit
button. button.
Move
Enter
Return
3. Press the or button to select a particular frequency to adjust. Press the or button to increase or decrease the level of the particular frequency. Press the ENTER button. Press the ExIT button to exit. L/R Sound Balance Adjustment: To adjust the sound balance of the L/R speakers. Bandwidth Adjustment (100Hz,00Hz, 1KHz, KHz, 10KHz): To adjust the level of different bandwidth frequencies. If you make any changes to the "Equalizer" settings, the sound mode is automatically switched to the "Custom" mode.
TV
R + 0 L
Balance
Equalizer
Move
Adjust
Return
English - 24
Move
Enter
Return
3. Press the or button to select "Off" or "On", then press the ENTER Press the ExIT button to exit.
button.
TV
Sound
Mode : Custom Equalizer SRS TruSurround xT : Off Off Multi-Track Options On Auto Volume : Off TV Speaker : On
TruSurround xT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround xT technology is incorporated under license from SRS Labs, Inc. Press the SRS button on the remote control to select "Off" or "On".
Move
Enter
Return
1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER
button.
Quick way to access the MTS menu: Just press the MTS button on the remote control. You can listen in a language other than your chosen language by pressing the MTS button. 2. Press the or button to select Multi-Track Options", then press the ENTER button. 3. Press the ENTER button to select Preferred Language. Press the or button to choose the language (English, Spanish or French) you want, then press the ENTER button. Press the ExIT button to exit. Preferred Language is available only in Digital TV mode. You can only select the language from among the actual languages being broadcast.
TV
Move
Enter
Return
Multi-Track Options
Preferred Language Multi-Track Sound : English : Stereo
Enter
Return
TV
Multi-Track Options
Preferred Language Multi-Track Sound : English English : Stereo Spanish French
Move
Enter
Return
You can listen in a language other than the Preferred language by pressing the MTS button on the remote control.
English - 2
TV
Multi-Track Options
Preferred Language Multi-Track Sound : English : Stereo
button.
3. ress the or button to select Multi-Track Sound, then press the ENTER P button. Press the or button to select a setting you want, then press the ENTER button. Press the ExIT button to exit. Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. Stereo: Choose for channels that are broadcasting in stereo. SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation. Multi-Track Sound is available only in Analog TV mode. Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Press the MTS buttons on the remote control repeatedly to select Mono, Stereo or SAP.
TV
Multi-Track Options
Preferred Language Multi-Track Sound : English : Stereo Mono Stereo SAP
Move
Enter
Return
3. Press the or button to set Auto Volume "Off" or "On" then press the ENTER button. Press the ExIT button to exit.
Move
Enter
Return
TV
Sound
Mode : Custom Equalizer SRS TruSurround xT : Off Multi-Track Options Auto Volume : Off Off TV Speaker : On On
Move
Enter
Return
English - 26
button. button.
Move
Enter
Return
TV
Sound
Mode : Custom Equalizer SRS TruSurround xT : Off Multi-Track Options Auto Volume : Off TV Speaker : On Off On Move Enter Return
3. Press the or button to select Off, then press the ENTER Press the ExIT button to exit.
button.
When TV Speaker is set to Off, Sound menus except Multi-Track Options cannot be adjusted. The VOL , VOL is set to Off. and MUTE buttons do not operate when the "TV Speaker"
TV's Internal Speakers RF TV Speaker On TV Speaker Off Video No Signal Speaker Output Mute Mute AV Speaker Output Mute Mute Component, PC, HDMI Speaker Output Mute Mute
Audio Out (Optical, L/R Out) to Sound System RF Sound Output Sound Output Mute AV Sound Output Sound Output Mute Component, PC, HDMI Sound Output Sound Output Mute
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
English - 27
button.
TV
Channel
Antenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength
2. Press the or button to select "Clear Scrambled Channel", then press the ENTER button. It searches scrambled channels, which are to be removed from the list. To stop searching scrambled channels: Press the ENTER button to select Stop. Press the button to select "Yes", then press the ENTER
Move
Enter
Return
button.
Plug & Play Clear Scrambled Channel Removing scrambled channel. DTV Cable 40 %
3. When the scrambled channel searching is completed, press the ENTER button. Press the ExIT button to exit. This function is only available in Cable mode.
Stop
Enter Return
English - 28
button.
Move
Enter
Return
TV
All Added Favorite
Channel List
Move
Enter
Return
4. Press the , , or button to select a channel to delete, then press the ENTER button. Press the or button to select Delete, then press the ENTER to delete the channel. The mark will disappear. button
Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 List Mode Move Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 List Mode Move Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 List Mode Move Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 List Mode Move Enter Enter Enter Enter
1/2
1/2
5. Press the , , or button to select a channel to add, then press the ENTER button. Press the or button to select Add, then press the ENTER add the channel. The mark will appear and the channel will be added. Press the ExIT button to exit. All selected channels will be shown on Added" menu. Red button: Press repeatedly to select All, Added or Favorite. Green button: Press to add all deleted channels. Yellow button: Press to delete all memorized channels. button to
1/2
1/2
English - 2
Move
Enter
Return
3. Press the or button to select "All" or "Added", then press the ENTER
button.
TV
All Added Favorite
Channel List
Move
Enter
Return
Air
1/2
4. ress the , , or button to select your favorite channels to watch P among the labeled channels. Then press the ENTER button. Press the or button to select Favorite, then press the ENTER button. The " " symbol will be highlighted and the channel will be set as a Favorite. To cancel your Favorite channel selection, press the ENTER button until the " " symbol is no longer highlighted. Press the ExIT button to exit. Only memorized channels can be set as favorite channels. All favorite channels will be shown in the Favorite menu.
DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 List Mode Move Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 List Mode Move Enter
To select the favorite channels you have set up, press the FAV.CH button on the remote control.
Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the or button to select Add to Favorite (or Delete from Favorite), then press the ENTER button. The current channel is added to (or deleted from) Favorites.
Picture Mode Sound Mode Sleep Timer Add to Favorite Switch to Air
Tools
: : : Standard Custom Off
Move
Enter
Exit
English - 0
button.
Move
Enter
Return
3. Press the or button to select All, Added or Favorite, then press the ENTER button.
TV
All Added Favorite
Channel List
4. Press the or button to select Channel, then press the ENTER button. To toggle between your all channels, add channels or favorite channels, use the Red button on the remote control. Red button: Press repeatedly to select All, Added or Favorite
Move
Enter
Return
Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 List Mode Move Enter
1/2
English - 1
Labeling Channels
Channels can be labeled so that their call letters appear whenever the channel is selected. 1. Press the MENU button to display the menu. Press the or button to select Channel, then press the ENTER button. Press the or button to select Name, then press the ENTER button.
TV Channel
Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength
Move
Enter
Return
2. Press the or button to select the channel to be assigned a new name, then press the ENTER button. Press the or button to select a letter, a number or a blank (Results in this sequence: A...Z, 0...9, +, -, *, /, blank). Press the button to switch to the next field, which will be selected. Select a second letter or digit by pressing the or button, as above. Repeat the process to select the last three digits. When you have finished, press the ENTER button to assign the new name. To erase the assigned new name, select "Clear" by pressing the or button, then press the ENTER button. Press the ExIT button to exit. The names of digital broadcasting channels are automatically assigned and cannot be labelled.
TV
Air Air Air Air Air 2 4 6 Move
Name
Clear Clear Clear Clear Clear Enter Return
TV
Air Air Air Air Air 2 4 6 Move
A
Name
Clear Clear Clear Clear Clear Adjust Return
English - 2
Move
Enter
Return
3. Press the or button to adjust the fine tuning. To store the fine tuning setting in the TVs memory, press the ENTER 4. To reset the fine tuning setting, press the button to select "Reset", then press the ENTER button. Press the ExIT button to exit. "*" will appear next to the name of fine-tuned channels. Only analog TV channels can be fine tuned.
Fine Tune
button.
Air 24 0
If you do not store the fine-tuned channel in memory, adjustments are not saved.
Reset
Adjust Save
Return
Reset
Adjust Save Return
Reset
Move Enter Return
button.
2. Press the or button to select Signal Strength, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Press the ExIT button to exit.
TV
Move
Enter
Return
Signal Strength
OK
Enter
Return
English -
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesnt equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub Input
Mode IBM Resolution 640x350 720400 640480 640480 640480 800600 800600 800600 1024768 1024768 1024768 1360 x 768 Horizontal Frequency (kHz) 31.469 31.469 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 47.712 Vertical Frequency (Hz) 70.086 70.087 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 60.015 Pixel Clock Frequency (MHz) 25.175 28.322 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 85.500 Sync Polarity (H/V) +/-/+ -/-/-/+/+ +/+ +/+ -/-/+/+ +/+
VESA
HDMI/DVI Input
Mode VESA Resolution 640480 800600 1024768 1360 x 768 Horizontal Frequency (kHz) 31.469 37.879 48.363 47.712 Vertical Frequency (Hz) 59.940 60.317 60.004 60.015 Pixel Clock Frequency (MHz) 25.175 40.000 65.000 85.500 Sync Polarity (H/V) -/+/+ -/+/+
English - 4
Picture
: Standard 7 4 0 Enter Return
2. Press the or button to select "Auto Adjustment", then press the ENTER Press the ExIT button to exit.
button.
Tools
Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the or button to select Auto Adjustment, then press the ENTER button.
: : :
Move
Enter
Exit
Adjusting the Screen Quality The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen. Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER Press the or button to select "Screen", then press the ENTER 2. Press the ENTER button to select "Image Lock". button.
PC
Image Lock Position Image Reset Resolution
TV
Mode Backlight Contrast Brightness Sharpness Auto Adjustment Screen More Move
Picture
: Standard 7 4 0 Enter Return
button. button.
3. Press the or button to select "Coarse" or "Fine", then press the ENTER Press the or button to adjust the screen quality. Vertical stripes may appear or the picture may be blurry. Press the ENTER button.
Screen
: 160 x 768 @60Hz
PC
Coarse Fine
Image Lock
0 4
Move
Enter
Return
Coarse
Move Adjust
0 Return
English -
Changing the Screen Position Adjust the PCs screen positioning if it does not fit the TV screen. Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER Press the or button to select "Screen", then press the ENTER 2. Press the or button to select "Position", then press the ENTER 3. Press the or button to adjust the V-Position. Press the or button to adjust the H-Position. Press the ENTER button. Press the ExIT button to exit. button. button. button.
Move Enter Return
PC
Image Lock Position Image Reset Resolution
Screen
: 160 x 768 @60Hz
TV
Position
Move
Enter
Return
Initializing the Screen Position, Coarse and Fine You can replace all image settings with the factory default values. Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER Press the or button to select "Screen", then press the ENTER button. button.
PC
Image Lock Position Image Reset Resolution
Screen
: 160 x 768 @60Hz
Move
Enter
Return
2. Press the or button to select "Image Reset", then press the ENTER button. Press the ExIT button to exit.
Viewing the Resolution You can confirm the resolution configured for the PC.
PC
Image Lock Position Image Reset Resolution
Screen
: 160 x 768 @60Hz
Move
Enter
Return
English - 6
Setup
Return
TV
Clock Sleep Timer Timer 1 Timer 2 Timer Move
Time
--/--/----/--:-- -: Off : Inactivated : Inactivated : Inactivated Enter Return
3. Press the ENTER button to select Clock Mode. Press the or button to select Manual, then press the ENTER
button.
TV
Clock Mode Clock Set Time Zone DST
Clock
: Manual Auto Manual : Off
Move
Enter
Return
P 4. ress the or button to select Clock Set, then press the ENTER button.
TV
Clock Mode Clock Set Time Zone DST
Clock
: Manual
: Off
Move
Enter
Return
5. Press the or button to move to Month, Day, Year, Hour, Minute, or am/pm. Set the date and time you want by pressing the or button, then press the ENTER button. Press the ExIT button to exit. The current time will appear every time you press the INFO button. You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control.
TV
Month
Clock Set
Enter the current date and time. Day Year
Hour
Minute
am/pm
Move
Adjust
Return
TV
Month
01
Clock Set
Enter the current date and time. Day
01
Year
2008
Hour
12
Minute
00
am/pm
am
Move
Adjust
Return
English - 7
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Enter : Medium : Off : English
Setup
Return
TV
Clock Sleep Timer Timer 1 Timer 2 Timer Move
Time
--/--/----/--:-- - : Off : Inactivated : Inactivated : Inactivated Enter Return
3. Press the ENTER button to select Clock Mode. Press the or button to select Auto, then press the ENTER
button.
TV
Clock Mode Clock Set Time Zone DST
Clock
: Manual Auto Manual : Off
Move
Enter
Return
4. Press the or button to select Time Zone, then press the ENTER
button.
TV
Clock Mode Clock Set Time Zone DST
Clock
: Auto
: Off
Move
Enter
Return
5. Press the or button to highlight the time zone for your local area, then press the ENTER button.
Time Zone
Select the time zone in which you live.
Newfoundland Atlantic Eastern Central Mountain Pacific Alaska Hawaii
6. Press the or button to select DST, then press the ENTER Press the ExIT button to exit.
button. button.
TV
Move
Enter
Return
Press the or button to select Off or On, then press the ENTER
Clock
Clock Mode Clock Set Time Zone DST : Auto
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. The Antenna or cable must be connected in order to set the time automatically.
: Off
Move
Enter
Return
TV
Clock Mode Clock Set Time Zone DST
Clock
: Auto
: Off Off On
Move
Enter
Return
English - 8
Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. button. button.
TV
Clock Sleep Timer : Off : Inactivated : Inactivated : Inactivated Move Enter Timer 1 Timer 2 Timer
Time
1/ 1/2008 12 : 00 am Return
2. Press the or button to select "Sleep Timer", then press the ENTER 3. Press the or button to adjust Minute, then press the ENTER Setting the Timer sets the Activation to On automatically. To cancel the set sleep timer : Press the or button to select Activation. Press the or button to select Off, then press the ENTER Press the ExIT button to exit.
button.
TV
Sleep Timer
Sets the Sleep Timer options.
button.
Minute
Activation
Off
Move
Adjust
Return
TV
Sleep Timer
Sets the Sleep Timer options. Minute
0
Activation
On
Move
Adjust
Return
Easy Setting 1. Press the TOOLS button on the remote control. 2. . 4. Press the or button to select Sleep Timer. Press the or button to select the minute. Press the ExIT or TOOLS button to exit.
Picture Mode Sound Mode Sleep Timer Add to Favorite Switch to Air
Tools
: Standard : Custom Off
Move
Adjust
Exit
English -
Setting the On/Off Timer 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. button.
TV
Clock Sleep Timer Timer 1 Timer 2 Timer
Time
1/ 1/2008 12 : 00 am : Off : Inactivated : Inactivated : Inactivated Move Enter Return
T 2. hree different On/Off Timer Settings can be made. Press the or button to select Timer 1, Timer 2 or Timer 3, then press the ENTER button.
3. Press the or button to select the desired item below. Press the or button to adjust the setting. On Time: Set the Hour, Minute, am/pm, and Activation/Inactivation. (To activate timer with the setting youve chosen, set to Activate.) Off Time: Set the Hour, Minute, am/pm, and Activation/Inactivation. (To activate timer with the setting youve chosen, set to Activate.) Volume: Set the required volume level. Channel: Select the desired channel. Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, or Manual. When Manual is selected, press the button to select the desired day of the week. Press the ENTER button over the desired day and the mark will appear. Press the ExIT button to exit. You can set the hour, minute and channel by pressing the number buttons on the remote control. Auto Power Off When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.
On Time Off Time Volume Repeat Once Move 12
Timer 1
: : 10 00 00 am am Channel Inactivate Inactivate Air Fri Sat
12
Adjust
Return
Setup
: English Return
2. Press the or button to select English, Espaol or Franais. Press the ENTER button. Press the ExIT button to exit.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move
Setup
: English English Espaol Franais : Medium : Off Enter Return
English - 40
Setting Up Your Personal ID Number (PIN) 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER 2. Press the or button to select V-Chip, then press the ENTER The message Enter PIN will appear. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. button. button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Enter : Medium : Off : English
Setup
Return
TV
Enter PIN * * *
V-Chip
3. The V-Chip screen will appear. Press the or button to select Change PIN, then press the ENTER button. The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Confirm Password screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized. Press the ExIT button to exit. If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. Mute 8 2 4 Power On.
.. Enter PIN TV
V-Chip Lock
Return
V-Chip
: Off TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter Return
TV
Enter new PIN.
Change PIN
Confirm Password
.. Enter PIN
Return
English - 41
How to Enable/Disable the V-Chip 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER 2. Press the or button to select V-Chip, then press the ENTER The message Enter PIN will appear. Enter your 4 digit PIN number. button. button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Enter : Medium : Off : English
Setup
Return
TV
Enter PIN * * *
V-Chip
.. Enter PIN
Return
3. The V-Chip screen will appear. To enable the V-Chip feature, press the ENTER button so that the V-Chip Lock field is On. (Pressing the or button will alternate between On and Off.) Press the ENTER button. Press the ExIT button to exit.
TV
V-Chip Lock
V-Chip
: Off Return TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter
TV
V-Chip
V-Chip Lock : off TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter Off On
Return
How to Set up Restrictions Using the TV Parental Guidelines First, set up a personal identification number (PIN) and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. 1. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER 2. Press the or button to select V-Chip, then press the ENTER The message Enter PIN will appear. Enter your 4 digit PIN number. button. button.
TV
Enter PIN * * *
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Move
Setup
: English Return
V-Chip
.. Enter PIN
Return
English - 42
3. The V-Chip screen will appear. Press the or button to select TV Parental Guidelines, then press the ENTER button.
TV
V-Chip Lock
V-Chip
: On Return TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter
4. The TV Parental Guidelines screen will appear. Press the or button to select one of the six aged based categories: TV-Y: Young children TV-Y7: Children 7 and over TV-G: General audience TV-PG: Parental guidance TV-14: Viewers 14 and over TV-MA: Mature audience
TV
TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA
TV Parental Guidelines
ALL FV V S L D Allow All Block All
Move
Enter
Return
TV
TV Parental Guidelines
TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA ALL FV V S L D Allow All Block All
5. At this point, one of the TV-Ratings is selected. Press the ENTER button. Depending on your existing setup, the symbol will be selected. (Blank = Unblocked, = Blocked) While is selected, press the ENTER button to block or unblock the category. To select a different TV-Rating, press the or button and then repeat the process. Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings. The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings: FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language / S: Sexual situation / V: Violence The V-Chip will automatically block certain categories that are more restrictive. For example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly.(See next section.) 6. How to set the FV, D, L, S and V sub-ratings. First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14 or TV-MA (See Step 4) and press the button. The symbol will be displayed for each sub-rating. While is selected, press the ENTER button to go to a sub rating. Press ENTER to block the sub rating. To select a different TV-Rating, press the or button and then repeat the process. ALL: Lock all TV ratings. FV: Fantasy violence V: Violence S: Sexual situation L: Adult Language D: Sexually Suggestive Dialog The V-chip will automatically block certain categories that are More restrictive. For example, if you block L sub-rating in TV-PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked. 7. Press the ExIT button to clear all the screens. (Or proceed to the next section, and set up additional restrictions based on the MPAA codes.) These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age 7) and TV-G through TV-MA (everybody else). The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV guidelines must be set up separately for each age group. (See next step.)
Move
Enter
Return
English - 4
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-1, R, NC-17, x, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER 2. Press the or button to select V-Chip, then press the ENTER The message Enter PIN will appear. Enter your 4 digit PIN number. button. button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Enter : Medium : Off : English
Setup
Return
3. The V-Chip screen will appear. Press the or button to select MPAA Rating, then press the ENTER button.
TV
Enter PIN * * *
V-Chip
.. Enter PIN TV
V-Chip Lock TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter
Return
V-Chip
: On Return
4. The MPAA Rating screen will appear. Repeatedly press the or button to select a particular MPAA category. Pressing the or button will cycle through the MPAA categories: G: General audience (no restrictions). PG: Parental guidance suggested. PG-1: Parents strongly cautioned. R: Restricted. Children under 17 should be accompanied by an adult. NC-17: No children under age 17. x: Adults only. NR: Not rated. Allow all: Press to unlock all TV ratings. Block all: Press to lock all TV ratings. While a particular category is selected, press the ENTER button to activate it. The symbol will be displayed. Press the ENTER button to block or unblock the category. The V-Chip will automatically block any category that is more restrictive. For example, if you block the PG-13 category, then R, NC-17 and X will automatically be blocked also. Press the ExIT button to exit.
TV
G PG PG-1 R NC-17 x NR
MPAA Rating
Block
Move
Enter
Return
TV
G PG PG-1 R NC-17 x NR
MPAA Rating
Block
Move
Enter
Return
English - 44
How to Set up Restrictions Using the Canadian English 1. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER 2. Press the or button to select V-Chip, then press the ENTER The message Enter PIN will appear. Enter your 4 digit PIN number. button. button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Enter : Medium : Off : English
Setup
Return
TV
Enter PIN * * *
V-Chip
.. Enter PIN
Return
3. The V-Chip screen will appear. Press the or button to select Canadian English, then press the ENTER button.
TV
V-Chip Lock
V-Chip
: On Return TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter
4. Press the or button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. The indicated. Press the ExIT button to exit. Allow all: Press to unlock all TV ratings. Block all: Press to lock all TV ratings.
TV
Canadian English
Block C C8+ G PG 14+ 18+
symbol is
Move
Enter
Return
C: Programming intended for children under age 8. C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. G: General programming, suitable for all audiences. PG: Parental Guidance. 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14. 18+: Adult programming. The V-Chip will automatically block any category that is more restrictive. For example, if you block G category, then PG, 14+ and 18+ will automatically be blocked also.
TV
C C8+ G PG 14+ 18+
Canadian English
Block
Move
Enter
Return
English - 4
How to Set up Restrictions Using the Canadian French 1. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER 2. Press the or button to select V-Chip, then press the ENTER The message Enter PIN will appear. Enter your 4 digit PIN number. button. button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Enter : Medium : Off : English
Setup
Return
TV
Enter PIN * * *
V-Chip
.. Enter PIN
Return
3. The V-Chip screen will appear. Press the or button to select Canadian French, then press the ENTER button.
TV
V-Chip Lock
V-Chip
: On Return TV Parental Guidelines MAPP Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter
4. Press the or button to select an appropriate restriction. Press the ENTER button to activate the restriction selected. The indicated. Press the ExIT button to exit. Allow all: Press to unlock all TV ratings. Block all: Press to lock all TV ratings.
TV
Canadian French
Block G 8 ans+ 1 ans+ 16 ans+ 18 ans+
symbol is
Move
Enter
Return
G: General 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. 1 ans+: Programming may not be suitable for children under the age of 13. 16 ans+: Programming is not suitable for children under the age of 16. 18 ans+: Programming restricted to adults. The V-Chip will automatically block any category that is more restrictive. For example, if you block 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.
TV
G 8 ans+ 1 ans+ 16 ans+ 18 ans+
Canadian French
Block
Move
Enter
Return
English - 46
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER 2. Press the or button to select V-Chip, then press the ENTER The message Enter PIN will appear. Enter your 4 digit PIN number.
TV Setup
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move Enter : Medium : Off : English Return
button. button.
TV
Enter PIN * * *
V-Chip
3. The V-Chip screen will appear. Press the or button to select Downloadable U.S. Rating, then press the ENTER button. If information is not downloaded from the broadcasting station, the Downloadable U.S. rating menu is deactivated. Parental restriction information is automatically downloaded while watching DTV channels. It may take several seconds. The Downloadable U.S. rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the infor mation from the broadcasting station, it may not be available for use. 4. Press the or button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. The indicated. Press the ExIT button to exit. Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings. Parental restriction levels differ depending on the broadcasting station. The default menu name and Downloadable US rating changes depending on the downloaded information. Even if you set the On-screen display to your desired language, the "Downloadable U.S. Rating" menu will appear in English only. The rating will automatically block certain categories that are more restrictive. The rating titles(For example: Humor Level.,etc) and TV ratings (For example: DH, MH, H., etc) may differ depending on the broadcasting station.
.. Enter PIN TV
V-Chip Lock TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move
Rating title
Return
V-Chip
: On Return
Enter
symbol is
TV
Move
Enter
Return
How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: 1. Enter your PIN. To resume normal viewing, tune to a different channel using CH or CH button. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use the V-Chip function for an emergency escape: P 2. ress the MENU button. Press the or button to select "Setup", then press the ENTER button. P 3. ress the or button to select "V-Chip", then press the ENTER E 4. nter your PIN, then press the ENTER temporarily disable the V-Chip Lock. button. button and press the or button to
Channel Is Locked by TV-PG [ S ] Use the NUMBER buttons to enter your pin number to unlock all channels. Press EXIT to clear PIN. Press MENU for main menu. Channel Is Locked by TV-PG [ L ] Use the NUMBER buttons to enter your pin number to unlock all channels. Press EXIT to clear PIN. Press MENU for main menu.
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. MUTE 8 2 4 Power On.
English - 47
Setup
Return
3. Press the ENTER button to select Caption. Press the or button to select On, then press the ENTER
button.
TV
Caption Caption Mode Caption Options
Caption
: Off : Default
Enter
Return
TV
Caption Caption Mode Caption Options
Caption
: Off Off On : Default
Move
Enter
Return
TV
Caption Caption Mode Caption Options
Caption
: On : Default
Move
Enter
Return
P 4. ress the or button to select Caption Mode, then press the ENTER button. Press the or button to select submenu (Default, CC1~CC4 or Text1~Text4) you want, the press the ENTER button. Press the ExIT button to exit. The default is CC1. CC1: The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame. CC2: The Special Non-Synchronous Use Captions. This channel carries data that is intended to augment information carried in the program. CC: Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions. CC4: Special Non-Synchronous Use Captions. Similar to CC2. Text1: First Text Service. This may be various non-program related data. Text2: Second Text Service. Additional data, usually not program related. Text/Text4: Third and Fourth Text Services. These data channels should be used only if Text1 and Text2 are not sufficient. The Caption feature doesnt work in Component, HDMI or PC modes. The availability of captions depends on the program being broadcast. Press the CC button on the remote control to turn the Caption On or Off.
TV
Caption Caption Mode Caption Options
Caption
: On Default CC1 : Default CC2 CC CC4 Text1 Text2 Text Text4 Enter Return
Move
English - 48
Caption
: Off Off On : Default
button.
4. Press the or button to select Caption Mode, then press the ENTER button. Press the or button to select submenu (Default, Service1~Service6,CC1~CC4 or Text1~Text4) you want, then press the ENTER button.
Move
Enter
Return
TV
Caption Caption Mode Caption Options
Caption
: On : Default
Move
Enter
Return
TV
Caption Caption Mode Caption Options
Caption
: On Default Service1 : Default Service2 Service Service4 Service Service6 CC1 Enter Return
5. Press the or button to select Caption Options, then press the ENTER button. Caption Options are available only when Default and Service 1~Service 6 can be selected in Caption Mode. Service1~6 in digital caption mode may not be available depending on the broadcast. 6. Press the or button to select Size, then press the ENTER button. Press the or button to select the desired Caption option, then press the ENTER button. Press the or button to select the desired sub-menu options (see options below), then press ENTER button. Press the ExIT button to exit. The availability of captions depends on the program being broadcast. Default means to follow the standard set by the broadcaster. Foreground and Background cannot be set to have the same color. Foreground Opacity and Background Opacity cannot be both set to Transparent. Size: This option consists of Default, Small, Standard and Large. The default is Standard. Font Style: This option consists of Default, Style0 ~ Style 7. You can change the font you want. The default is Style 0. Foreground Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White. Background Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black. Foreground Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the opacity of the letter. Background Opacity: This option consists of Default, Transparent, Translucent, Solid,and Flashing. You can change the background opacity of the caption. Return to Default: This option sets each of Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.
English - 4
Move
TV
Caption Caption Mode Caption Options
Caption
: On : Service1
Move
Enter
Return
TV
Caption Options
Size Font Style Foreground Color : Default : Default : Default
Background Color : Default Foreground Opacity : Default Background Opacity : Default Return to Default Move Enter
Return
Press the CC button on the remote control to turn the Caption On or Off.
Setup
Return
3. Press the or button to select Off, Low, Medium or High, then press the ENTER button. Off : Turns off the melody function. Low : Sets the melody volume to low. Medium : Sets the melody volume to medium. High : Sets the melody volume to high. Press the ExIT button to exit. The Melody does not play - When no sound is output from the TV because the MUTE button has been pressed. - When no sound is output from the TV because the Volume has been reduced to minimum with the VOL- button. - When the TV is turned off by Timer function.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move
Setup
: English Off Low : Medium Medium : Off High Enter Return
Setup
: English Return
2. Press the or button to select "Energy Saving", then press the ENTER
Select the required option (Off, Low, Medium, High) by pressing the or button. Press the ENTER button. Off: Turns off the energy saving function. Low: Sets the TV to low energy saving mode. Medium: Sets the TV to medium energy saving mode. High: Sets the TV to high energy saving mode.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving Move SW Upgrade Move
Setup
: English
Return Return
English - 0
USB Drive
2. Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER button. 3. Press the or button to select SW upgrade, then press the ENTER button.
TV
Plug & Play Language Time V-Chip Caption Melody Energy Saving SW Upgrade Move
Setup
: English : Medium : Off Enter Return
4. Press the ENTER button. The message Scanning for USB... It may take up to 30 seconds. is displayed. 5. he message Upgrade version XXXX to version XXXX The system would be reset T after upgrade. is displayed. Press the or to select the Yes, then press the ENTER button. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
USB Software Upgrade Upgrade version xxxx to version xxxx The system would be reset after upgrade.
Yes
No
English - 1
Appendix Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Poor picture Poor sound quality. No picture or sound. Possible Solution Try another channel. Adjust the antenna. Check all wire connections. Try another channel. Adjust the antenna. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections. First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly. Check all wire connections. Unplug the TV for 30 seconds, then try operating it again. Make sure the wall outlet is working. Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals. Ensure that the signal cable is firmly connected to the PC source. Check the maximum resolution and connected devices Video frequency. Compare these values with the data in the Display Modes. Please check the digital signal strength and input antenna. Adjust the Brightness and Contrast. Adjust the Fine tuning. Make sure the broadcast youre receiving is High Definition (HD). HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars. Set your cable/satellite box to stretch or widescreen mode to eliminate the bars. Make sure the Component cables are connected to the correct jacks. If you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV. Your cable box may need a firmware upgrade. Please contact your Cable company. This is sometimes caused by compatibility issues with your cable box. Try connecting Component cables instead.
No sound or sound is too low at maximum volume. Picture rolls vertically. The TV operates erratically. The TV wont turn on. Remote control malfunctions Check signal cable message. Not Supported Mode message. Digital broadcasting screen problem. The image is too light or too dark. Black bars on the screen.
Picture has a Red/Green or Pink tint. Closed Captioning not working. Snowy picture Ghosting on picture
English - 2
Problem Horizontal bars appear to flicker, jitter or shimmer on the image. Vertical bars appear to flicker, jitter or shimmer on the image. Screen is black and power indicator light blinks steadily. Image is not stable and may appear to vibrate when you have a computer connected to the PC input.
Possible Solution Adjust the Coarse tuning and then adjust the Fine tuning. Adjust the Coarse tuning and then adjust the Fine tuning. On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard. If the setting is not correct, use your computer utility program to change the display settings. Your TV supports multiscan display functions within the following frequency domain: Horizontal frequency (kHz) Vertical frequency (Hz) PC Maximum refresh rate (at 60 Hz) 30~60 60~75 1360 X 768
Image is not centered on the screen. The picture appears distorted in the corner of the screen. The Resets all settings to the default values message appears.
Adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i.e. STB) with a digital signal. If "Just Scan" is selected with some external devices, the picture may appear distorted in the corner of the screen. This symptom is caused by the external devices, not TV. This appears when you press and hold the ExIT button for a while. The product settings are reset to the factory defaults.
This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English -
1. Attach your LCD TV to the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when attaching it. To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV. 2. Fasten two screws at position 1 and then fasten two screws at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side.
1. Remove four screws from the back of the TV. 2. Separate the stand from the TV. Two or more people should carry the TV. 3. Cover the bottom hole with the cover.
English - 4
Entering the menu 1. Press the , , or button on your remote control. The Wall Mount Adjustment screen is displayed. If the Wall Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV, use the menu to display that screen. Press the MENU butt on to display the menu. Press the or button to select Setup, then press the ENTER button. Press the or button to select External Settings, then press the ENTER button. Press the or button to select Wall-Mount Adjustment, then press the ENTER button. Remembering the Position 2. Adjust to the desired position using the ,,, buttons. If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears. Press the INFO button to reset. Press the or button to select Yes, then press the ENTER button. The position is initialized to the default setting. . Press the blue button. Press the and buttons to select a save mode from either Position 1, Position 2 or Position 3 in order to save the current position. To not save the current position, press the RETURN button. When selecting a save mode, you cannot use the Color buttons. 4. Press the ENTER button to save. When Position1 is selected, the message "Current position saved as Position1" is displayed. . Press the ENTER button. The saved Position appears on the left side of the OSD. Moving to the remembered position 1. Complete Step 1 of Entering the menu. 2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the saved position. You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons. If you adjust the position after moving to a pre-set position, the position display will disappear.
TV
Melody
External Settings
: Medium Wall-Mount Adjustment
Move
Enter
Return
Wall-Mount Adjusment
Position Adjust
1 Save
2
INFO
Center
Position Adjust
1 Save
2
INFO
Center
For installation, refer to the Installation Manual provided with the wall mount. For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company. This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. LN37A330J1D and LN40A330J1D models are not compatible with the older wall mount model (WMN5090A).
English -
Product Family
inches 23~ 26 32 ~ 40 46 ~ 52
VESA Spec. (A * B) 200 * 100 200 * 200 600 * 400 700 * 400 (No VESA) 800 * 400 1400 * 800 600 * 400 800 * 400 No VESA 1400 * 800
Standard Screw M4 M6
Quantity
LCD-TV
57 57 ~ 70 80 ~ 42 ~ 50
4 M8
PDP-TV
55 ~ 70 63 80 ~
4 M8 6 4
Standard dimensions for wall mount kits are shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Do not exceed 15 degrees tilt when mounting this TV. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
English - 6
<Optional>
The location of the Kensington Lock may be different depending on its model. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction (Figure 2). 2. Connect the Kensington Lock cable. 3. Fix the Kensington Lock to a desk or a heavy stationary object.
English - 7
Specifications
Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight Without stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) LN26A0J1D 26 inches 1360 x 768 @ 60 Hz 5W x 2 29.3 X 3.1 X 17.6 inches (743.8 X 79.8 X 447.4 mm) 29.3 X 9.1 X 19.9 inches (743.8 X 232 X 506.5mm) 10.5 kg (23.1 lbs) LN2A0J1D 32 inches 1360 x 768 @ 60 Hz 10W x 2 34.4 X 3.2 X 20.9 inches (874 X 81 X 531 mm) 34.4 X 11.5 X 22.7 inches (874 X 291 X 577 mm) 15 kg (33.1 lbs)
50 F to 104 F (10 C to 40 C) 10% to 80%, non-condensing -4 F to 113 F (-20 C to 45 C) 5% to 95%, non-condensing -20 ~ 20
Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight Without stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right)
LN7A0J1D 37 inches 1360 x 768 @ 60 Hz 10W x 2 39.9 X 3.7 X 23.7 inches (1013 X 93 X 602.3 mm) 39.9 X 11.8 25.7 inches (1013 X 300 X 652 mm)) 20.5 kg (45.2 lbs)
LN40A0J1D 40 inches 1360 x 768 @ 60 Hz 10W x 2 42.7 X 3.7 X 25.2 inches (1084 X 95 X 639 mm) 42.7 X 11.8 X 27.2 inches (1084 X 300 X 690 mm) 21.5 kg (47.4 lbs)
50 F to 104 F (10 C to 40 C) 10% to 80%, non-condensing -4 F to 113 F (-20 C to 45 C) 5% to 95%, non-condensing -20 ~ 20
50 F to 104 F (10 C to 40 C) 10% to 80%, non-condensing -4 F to 113 F (-20 C to 45 C) 5% to 95%, non-condensing -20 ~ 20
Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. For the power supply and Power Consumption, refer to the label attached to the product.
English - 8
Dimensions
LN26A0J1D
TOP VIEW
29.3
22.8
12.8
17.6 19.9
19.1
9.1
REAR VIEW
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 2008 Samsung Electronics America, Inc.
English -
Dimensions
LN2A0J1D
TOP VIEW
34.4
3.2
27.5
15.5
20.9 22.7
21.5
11.5
REAR VIEW
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 2008 Samsung Electronics America, Inc.
English - 60
Dimensions
LN7A0J1D
TOP VIEW
3.7 39.9
32.4
18.3
23.7 25.7
23.3
11.8
REAR VIEW
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 2008 Samsung Electronics America, Inc.
English - 61
Dimensions
LN40A0J1D
TOP VIEW
34.9
19.7
25.2 27.2
23.3
11.8
REAR VIEW
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 2008 Samsung Electronics America, Inc.
English - 62
TLVISEUR ACL
Guide de lutilisateur
www.samsung.com/global/register
Modle N de srie
Prcautions prendre lors de laffichage dune image fixe Une image fixe peut causer des dommages irrmdiables lcran du tlviseur. Naffichez pas une image fixe sur lcran LCD plus de 2 heures. Cela pourrait provoquer une rmanence de limage lcran. Cette rmanence de limage est galement appele brlure de lcran. Pour viter une telle rmanence de limage lcran, rduisez la luminosit et le contraste de lcran lorsque vous laissez une image fixe affiche Regarder lcran LCD du tlviseur en format 4:3 pendant une longue priode peut laisser des traces de bordures gauche, droite et au centre de lcran, cause de la diffrence dmission de lumire sur lcran. La lecture dun DVD ou lutilisation dune console de jeu peut avoir un effet similaire sur lcran. Les dommages provoqus par les effets qui prcdent ne sont pas couverts par la garantie. Laffichage dimages fixes de jeux vido et dordinateurs pendant plus longtemps quune priode spcifique peut provoquer des rmanences.Pour viter cela, rduisez la luminosit et le contraste lors de laffichage dimages fixes.
2007 Samsung Electronics Co., Ltd. All rights reserved.
ConnexIons
Suppression des canaux brouills canaux numriques ............. 28 Ajout et suppression de chanes ................................................... 29 Configuration de vos chanes favorites ......................................... 30 Affichage de la liste des chanes .................................................. 31 Nom des chanes .......................................................................... 32 Syntonisation fine des chanes analogiques ................................. 33 Contrle de la puissance du signal numrique ............................. 33
Connexion dantennes VHF et UHF ................................................ 6 Connexion du cble TV ................................................................... 7 Connexion dun lecteur DVD ou dun dcodeur cble/ rcepteur satellite (botier dcodeur) via HDMI .............................. 8 Connexion dun lecteur DVD ou dun dcodeur cble/ rcepteur satellite (botier dcodeur) via DVI .................................. 8 Branchement dun lecteur DVD, cbloslecteur ou rcepteur satellite laide de cbles composantes ......................................... 9 Connexion d'un camscope ........................................................... 9 Branchement dun magntoscope ................................................ 10 Branchement d'un systme audio numrique ............................... 11 Connexion dun amplificateur/home cinma DVD ........................ 11 Branchement dun PC ................................................................... 12
aFFIChage PC
Franais
Utilisation de votre tlvision comme un cran PC ....................... 34 Modes daffichage ......................................................................... 34 Configurer votre tlviseur avec votre PC .................................... 35
ParamTre dheure
desCrIPTIon de la FonCTIon
FonCTIonnemenT
Mise en marche et arrt de la tlvision ....................................... 13 Fonction Prt lemploi................................................................. 13 Changement des canal ................................................................. 14 Rglage du volume ....................................................................... 15 Visualisation de laffichage ............................................................ 15 Visualisation des menus ............................................................... 15 Utilisation de la touche TOOLS ..................................................... 16 Mmorisation des canal ................................................................ 16 Pour slectionner la source .......................................................... 18 Pour diter le nom de la source .................................................... 18
Slection dune langue de menu ................................................... 40 Utilisation de la fonction puce V-Chip ........................................... 41 Affichage des sous-titres (messages texte l'cran) Analogique ................................................................................. 48 Affichage des sous-titres (messages texte l'cran) Numrique.................................................................................. 49 Rglage de la mlodie de mise sous/hors tension du tlviseur .. 50 Fonction conomiseur dnergie ................................................... 50 Mise niveau du logiciel ............................................................... 51
annexe
ConTrle de lImage
Changement du format normal de limage .................................... 19 Personnalisation des rglages de limage .................................... 19 Configuration des options dimage ................................................ 20 Rtablir les paramtres de rglage de l'image d'usine ................. 23
Identification des problmes ......................................................... 52 Installation du support .................................................................. 54 Dmonter la base .......................................................................... 54 Support mural rglage automatique (vendu sparment) (LN32A330J1D, LN37A330J1D, LN40A330J1D) ............................ 55 Spcifications du jeu dinstallation murale (VESA) ....................... 56 Utilisation du verrouillage Kensington antivol (en fonction du modle) ................................................................ 57 Spcifications ................................................................................ 58 Dimensions ................................................................................... 59
ConTrle du son
Changement du format normal du son ......................................... 24 Personnalisation du son ................................................................ 24 Paramtrage de la technologie TruSurround XT........................... 25 Slection d'une bande son canaux multiples (MTS) Numrique.................................................................................. 25 Slection d'une bande son canaux multiples (MTS) - Analogique .................................................................................. 26 Contrle automatique du volume .................................................. 26 Activation et dsactivation des haut-parleurs ............................... 27
symboles
Appuyer
Remarque
Franais -
Accessoires
Vrifiez que les lments suivants sont inclus avec votre tlvision LCD. Sil manque des lments, contactez votre revendeur.
Panneau arrire (LN26A330J1D: BN63-03176A) (LN32A330J1D: BN63-03093A) (LN37A330J1D: BN63-03127A) (LN40A330J1D: BN63-03127A)
Instructions Dutilisation
Carte de garantie / Cartes denregistrement / Guide de scurit (Nest pas disponible dans toutes les agences)
Socle Vis (M4 X L14) (LN32A330J1D: 6003-001334) (LN37A330J1D: 6003-001334) (LN40A330J1D: 6003-001334)
Franais - 2
1 SOURCE Bascule entre toutes les sources dentre disponibles (TV, AV, Composante 1, Composante 2, PC, HDMI1, HDMI2). Dans le menu lcran, utilisez ce bouton de la mme manire que le bouton ENTER de la tlcommande. 2 MENU Appuyez pour voir lcran le menu des fonctions de votre tlvision. 3 + VOL Appuyez sur ce bouton pour augmenter ou baisser le volume. Dans le menu lcran, utilisez les boutons + VOL - de la mme manire que les boutons et de la tlcommande. 4 < Ch > Appuyez sur ce bouton pour changer de canal. Dans le menu lcran, utilisez les boutons < Ch > de la mme manire que les boutons et de la tlcommande.
5 hAUT-PARLEURS 6 (ALIMENTATION) Appuyez sur ce bouton pour allumer et teindre la tlvision. CAPTEUR DE LA TLCOMMANDE Dirigez la tlcommande vers de point de la tlvision. VOYANT DALIMENTATION Clignote puis sarrte lorsque le tlviseur est allum. Sallume en mode Veille.
Franais -
La couleur et la forme du produit peuvent varier en fonction du modle. 1 AUDIO OUT A connecter aux prises d'entre audio de votre amplificateur/home cinma. 2 DIGITAL AUDIO OUT (OPTICAL) brancher un appareil audio numrique. 3 PC IN [PC] / [AUDIO] A connecter aux prises de sortie audio et vido de votre PC. 4 hDMI IN 1, 2, / DVI IN(hDMI2)[R-AUDIO-L] A connecter la prise HDMI d'un priphrique dot d'une sortie HDMI. Utilisez la borne HDMI IN 2 pour la connexion DVI vers un priphrique externe. Utilisez un cble DVI vers HDMI ou un adaptateur DVI-HDMI (DVI vers HDMI) pour la connexion vido et les prises DVI IN (HDMI2) [R-AUDIO-L] pour la sortie audio. - Aucune connexion audio n'est requise entre deux appareils HDMI. - La prise dentre HDMI IN 2 doit tre utilise pour un branchement de cble HDMI/DVI. 5 ANT IN A connecter une antenne ou un tlviseur par cble. 6 PUISSANCE CONSOMME Connectez le cble d'alimentation fourni.
7 SERVICE Connecteur rserv aux oprations de maintenance uniquement. 8 COMPONENT IN 1, 2 / AV 1 La prise COMPONENT IN 1 sert galement de prise AV IN 1. - Brancher le Cble vido la prise COMPONENT IN 1 [Y/VIDEO] et le Cble audio aux prises COMPONENT IN 1 [R-AUDIO-L]. 9 Ex-LINK - LN26A0J1D Connecteur rserv aux oprations de maintenance uniquement. - LN2A0J1D / LN7A0J1D / LN40A0J1D Brancher cette sortie la prise sur le support mural en option. Cette fonction permet de rgler langle de visionnement du tlviseur laide de la tlcommande. 0 VERROU KENSINGTON Le verrou Kensignton (en option) est un dispositif servant immobiliser un appareil utilis dans un endroit public. Si lon dsire utiliser un verrou, il faut communiquer avec le magasin o le tlviseur a t achet. Lemplacement du verrou Kensington peut tre diffrent selon le modle du tlviseur.
Franais - 4
Tlcommande
Vous pouvez utiliser la tlcommande une distance maximale du tlviseur denviron 7 m. 1 POWER Pour allumer et teindre la tlvision. 2 TV Pour slectionner directement le mode TV. 3 BOUTONS NUMRIQUES Permet de changer de chane. 4 Appuyez sur ce bouton pour slectionner des canaux supplmentaires (numriques et analogiques) diffuses par la mme station. Par exemple, pour slectionner le canal 54-3, appuyez sur 54, puis sur et sur 3. (MUTE) Appuyez sur ce bouton pour couper temporairement le son. @ MTS Appuyez sur ce bouton pour choisir Stro, Mono ou Programme audio spar (Diffusion de programme audio spar). # SOURCE Appuyez sur ce bouton pour afficher toutes les sources vido disponibles. $ PRE Ch Syntonise sur la canal prcdente. % Ch / Ch Syntonise sur la canal prcdente. ^ RETURN Revient au menu prcdent. & ExIT Appuyez sur ce bouton pour quitter le menu. * SRS Slectionne le mode SRS TruSurround XT. ( MENU Pour afficher le menu principal lcran. ) FAV.Ch Appuyez sur ce bouton pour naviguer entre vos chanes favorites. a P.SIZE Slection de la taille de l'image.
6 VOL / VOL Appuyez sur ce bouton pour augmenter ou baisser le volume. 7 TOOLS Permettent de slectionner les fonctions frquemment utilises. 8 UP / DOWN / LEFT / RIGHT / ENTER Autiliser pour slectionner les lments du menu lcran et modifier les valeurs du menu. 9 INFO Appuyez sur cette touche pour afficher de linformation lcran. 0 TOUChES DE COULEUR Utiliser ces touches partir de la liste des canaux, etc. ! CC Permet de commander la fonction de sous-titrage.
Franais -
1. 2.
.
2.
ANT IN
Antennes avec cble rond de 75 1. Branchez le cble de l'antenne dans la prise ANT IN situe en bas du panneau arrire.
ANT IN
Antennes VhF et UhF spares Si vous disposez de deux antennes spares pour votre tlvision (une VHF et une UHF), vous devez combiner les deux signaux des antennes avant de les brancher la tlvision. Cette procdure exige un multiplexeur-adaptateur (disponible dans la plupart des magasins dlectronique). 1. Branchez les deux cbles des antennes au multiplexeur.
UhF VhF
2.
Franais - 6
Connexion du cble TV
Pour brancher un systme de tlvision par cble, suivez les instructions ci-dessous. Cble sans bote de jonction 1. Branchez le cble darrive dans la prise ANT IN situe larrire de la tlvision.
Cette tlvision tant quipe dun dispositif pour le cble, vous navez pas besoin de bote de jonction pour voir des canal cbles en clair.
ANT IN
ANT IN
2.
.
Branchez un cble de RF entre une des prises OUTPUT du sparateur et la prise IN de la bote de jonction.
Cble darrive
4.
Branchez un cble de RF entre la prise ANT OUT de la bote de jonction et la prise B.IN de linterrupteur RF (A/B).
Cble darrive
Interrupteur RF(A/B)
.
Branchez un autre cble entre lautre prise OUT du sparateur et la prise A.IN de linterrupteur RF (A/B).
Cble darrive
Interrupteur RF(A/B)
6.
Connectez le dernier cble RF entre la borne OUT du commutateur RF (A/B) et la borne ANT IN situe larrire du tlviseur.
ANT IN
Cble darrive
Interrupteur RF(A/B)
Arrire de la tlvision
Aprs avoir tabli cette connexion, rglez linterrupteur A/B en position A pour regarder les canal normales. Placez linterrupteur A/B en position B pour une regarder les canal cryptes. (Lorsque vous placez linterrupteur A/B sur B, vous devez syntoniser votre tlvision sur la canal de sortie de la bote de jonction qui est habituellement la canal 3 ou 4.)
Franais - 7
Connexion dun lecteur DVD ou dun dcodeur cble/rcepteur satellite (botier dcodeur) via hDMI
Ceci nest ralisable que si le priphrique externe dispose dun connecteur de sortie HDMI. 1. Branchez un cble HDMI Lecteur DVD ou dcodeur cble/ entre la prise HDMI IN (1 ou Pannear arrire de la tlvision rcepteur satellite (botier dcodeur) 2) du tlviseur et la prise HDMI du lecteur DVD ou du dcodeur cble/rcepteur satellite (botier dcodeur).
Quest-ce que le mode HDMI ? HDMI ou high-definition multimedia interface (interface multimdia haute dfinition) est une interface de nouvelle gnration qui permet la transmission de signaux numriques audio et vido laide dun simple cble et sans compression. La diffrence entre les interfaces HDMI et DVI rside dans le fait que la HDMI est de plus petites dimensions, quelle est dote du composant de codage HDCP (protection contre la copie numrique large bande passante). La configuration du panneau arrire de chaque lecteur DVD ou de chaque dcodeur cble/rcepteur satellite (botier dcodeur) diffre.
Connexion dun lecteur DVD ou dun dcodeur cble/rcepteur satellite (botier dcodeur) via DVI
Ceci nest ralisable que si le priphrique externe dispose dun connecteur de sortie DVI. 1. Branchez un cble DVI vers HDMI ou un adaptateur DVI-HDMI entre la prise HDMI IN 2 du tlviseur et la prise DVI du lecteur DVD ou du dcodeur cble/rcepteur satellite (botier dcodeur). Branchez les cbles audio entre la prise DVI IN (HDMI 2) [R-AUDIO-L] du tlviseur et le lecteur DVD ou le dcodeur cble/rcepteur satellite (botier dcodeur).
Pannear arrire de la tlvision DVD ou du dcodeur cble/ rcepteur satellite (botier dcodeur)
2.
La configuration du panneau arrire de chaque lecteur DVD ou de chaque dcodeur cble/rcepteur satellite (botier dcodeur) diffre. Lorsque vous branchez un lecteur DVD ou un dcodeur cble/rcepteur satellite (botier dcodeur), faites correspondre les couleurs de la borne de connexion celles du cble. La prise dentre HDMI IN 2 doit tre utilise pour un branchement de cble HDMI/DVI.
Franais - 8
Branchement dun lecteur DVD, cbloslecteur ou rcepteur satellite laide de cbles composantes
Les prises du panneau arrire de votre tlviseur ont t spcialement conues pour faciliter le branchement dun lecteur DVD ou dun dcodeur cble/rcepteur satellite (botier dcodeur) votre tlviseur. 1. Branchez un cble composant entre les prises COMPONENT IN (1 ou 2) [Y, PB, PR] du tlviseur et les prises COMPONENT [Y, PB, PR] du lecteur DVD ou du dcodeur cble/rcepteur satellite (botier dcodeur). Branchez les cbles audio entre les prises COMPONENT IN (1 ou 2) [R-AUDIO-L] du tlviseur et les prises AUDIO OUT du lecteur DVD ou du dcodeur cble/rcepteur satellite (botier dcodeur).
Pannear arrire de la tlvision Lecteur DVD ou dcodeur cble/ rcepteur satellite (botier dcodeur)
2.
La composante vido spare la vido entre Y (Luminosit), Pb (Bleu) et Pr (Rouge) pour une qualit vido accrue. Assurez-vous de faire correspondre la composante vido et les connexions audio. Par exemple, si un Cble vido Composante est branch la prise dentre COMPONENT IN 1, le Cble audio doit tre branch la prise dentre COMPONENT IN 1 galement. La configuration du panneau arrire de chaque lecteur DVD ou de chaque dcodeur cble/rcepteur satellite (botier dcodeur) diffre. Lorsque vous branchez un lecteur DVD ou un dcodeur cble/rcepteur satellite (botier dcodeur), faites correspondre les couleurs de la borne de connexion celles du cble.
Camscope
La configuration arrire de chaque camscope est diffrente suivant les appareils. Lorsque vous connectez un camscope, faites correspondre les couleurs de la borne et du cble. La couleur de la prise dentre AV IN 1 [Y/VIDO] (vert) ne correspond pas la couleur du Cble vido (jaune).
Franais -
Si vous avez un magntoscope mono Cble RF (non fourni) (cest--dire quil nest pas stro), utilisez le connecteur Y (non fourni) Suivez les instructions de Visualisation dune cassette laide dun magntoscope ou dun pour le brancher aux prises camscope pour visualiser une cassette laide de votre magntoscope. dentre audio droite et La configuration arrire de chaque magntoscope est diffrente suivant les appareils. gauche de la tlvision. Lorsque vous connectez un magntoscope, faites correspondre les couleurs de la borne Si votre magntoscope et du cble. fonctionne en stro, La couleur de la prise dentre AV IN 1 [Y/VIDO] (vert) ne correspond pas la couleur du vous devez brancher deux Cble vido (jaune). cbles distincts.
Franais - 10
La diffusion audio en 5.1 canaux est possible lorsque le tlviseur est raccord un appareil externe dot de cette fonction audio. La configuration du panneau arrire de chaque systme audio numrique diffre. Lorsque le rcepteur (chane de cinma maison) est rgl On, il est possible dentendre du son provenant de la prise optique du tlviseur. Lorsque le tlviseur met des signaux numriques (air), il transmet le son en 5.1 canaux au rcepteur de la chane de cinma maison. Lorsque la source est un composant numrique, comme un lecteur DVD, et que ce dernier est branch au tlviseur laide dun Cble HDMI, seul un son deux canaux sera mis par le rcepteur de la chane de cinma maison.
La configuration arrire de chaque amplificateur/home cinma DVD est diffrente suivant les appareils. Lorsque vous connectez un amplificateur/home cinma DVD, faites correspondre les couleurs de la borne et du cble.
Franais - 11
Branchement dun PC
Utilisation dun cble secondaire D 1. Branchez un cble secondaire D entre le connecteur PC IN [PC] du tlviseur et le connecteur de sortie PC de votre ordinateur Branchez un cble audio PC entre la prise PC IN [AUDIO] du tlviseur et la prise Sortie audio de la carte son de votre ordinateur.
PC Pannear arrire de la tlvision
2.
Utilisation dun cble hDMI/DVI 1. Connectez le cble HDMI/DVI la prise HDMI IN 2 [PC] l'arrire de votre unit. Branchez un cble mini-prise stro 3,5 mm/2RCA entre la prise DVI IN (HDMI2) [R-AUDIO-L] du tlviseur et la prise Sortie audio de la carte son de votre ordinateur.
PC Pannear arrire de la tlvision
2.
2 Cble mini-prise stro , mm/2RCA (non fourni) 1 Cble hDMI/DVI (non fourni)
La configuration arrire de chaque PC est diffrente suivant les appareils. Lorsque vous connectez un PC, faites correspondre les couleurs de la borne et du cble. La prise dentre HDMI IN 2 doit tre utilise pour un branchement de cble HDMI/DVI.
Franais - 12
Prt lemploi Les modes Langue des menus, Dmo en magasin, Canaux et heure sont rgls.
Dmarrer
Intro.
2.
.
Dmo magasin
Util. domicile
Dpl.
Intro.
Prt lemploi
Dmarrer
Numrique
Dpl.
Intro.
Passer
Plug &auto Prog. Play Rglage auto . en cours DTV Air : 02 Air : 11 DTV Cble : 2 Cble : 21
Une fois tous les canaux mmoriss, le tlviseur commence liminer les canaux brouills (voir la page 28). Puis le menu Prog. auto saffiche. Appuyer sur la touche ENTER lorsque la mmorisation des canaux est termine. Le message Rgler le mode horloge saffiche.
Cble 0 0 %
Passer
Arrt
Intro.
Plug &auto Prog. Play Suppression des canaux brouills. DTV Cble 41 77 %
Arrt
Intro. Passer
Franais - 1
Prog. Play Plug &auto Progr. Aut. termine 7 Channels are memorized. DTV Air : 24 Air : 1 DTV Cble : 17 Cble :
OK
Intro. Passer
6.
Appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Auto, puis appuyez sur le bouton ENTER . Le message Rgler lheure avance. saffiche.
(Voir page 37)
7.
Appuyez sur les bouton ou pour slectionner Off ou On, puis appuyez sur le bouton ENTER . Le message Choisir le fuseau horaire dans lequel vous vivez. saffiche.
Dpl.
Intro.
Passer
8.
Appuyez sur les bouton ou pour slectionner le fuseau horaire de votre rgion. Appuyez sur le bouton ENTER . Si vous recevez un signal numrique, l'horloge se rgle automatiquement. Dans le cas contraire, rendez-vous la page 37 pour savoir comment rgler l'horloge. Le message Prenez plaisir regarder s'affiche. Lorsque vous avez termin, appuyez sur le bouton ENTER
Dpl.
Intro.
Passer
.
Dpl.
Intro.
Passer
Prt lemploi
Si vous souhaitez rinitialiser ce paramtre... 1. Appuyez sur la touche MENU. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . Appuyez sur ENTER pour choisir Plug & Play. Pour en savoir plus sur la configuration des options, consulter les pages 13 et 14. La fonction Plug & Play nest accessible quen mode TV.
TV
OK
Intro.
Configuration
Prt lemploi Langue heure : Franais Retour
2.
Franais - 14
Utilisation du bouton Utilisez le bouton 1. pour slectionner les chanes diffusant un signal numrique. Par exemple, pour choisir le canal 7-1, appuyer sur 7, puis sur et sur 1. HD indique que le tlviseur reoit un signal DHD (Digital High Definition). SD indique que le tlviseur reoit un signal analogique standard (Standard Definition). Pour changer rapidement de chane, appuyez sur le pav numrique, puis sur le bouton ENTER . Appuyez sur la touche PRE Ch pour slectionner la chane prcdente. 1. Appuyez sur le bouton PRE Ch. La tlvision passe la dernire canal regarde. Pour passer rapidement dune canal une autre canal loigne, accdez la canal ini tiale puis utilisez les boutons numriques pour slectionner la seconde canal. Puis, utilisez le bouton PRE Ch pour passer rapidement de lune lautre.
Rglage du volume
Utilisation des touches de rglage du volume 1. Appuyez sur les bouton VOL ume. ou VOL pour augmenter ou diminuer le vol-
Utilisation de la fonction Muet Vous pouvez tout moment couper le son en appuyant sur le bouton MUTE. 1. Appuyez sur bouton MUTE et le son est coup. " Assourdir " saffiche lcran. 2. Pour dsactiver le mode Mute, appuyez de nouveau sur le bouton MUTE ou simplement sur les boutons VOL or VOL .
Visualisation de laffichage
Laffichage identifie la canal en cours et ltat de certains paramtres audio et vido. 1. Appuyez sur le bouton INFO de la tlcommande. La tlvision affiche la canal, le type de son et ltat de certains paramtres de son et dimage. Appuyez de nouveau sur la touche INFO ou attendez environ 10 secondes avant quil disparaisse automatiquement.
Air 7 Mono Mode image Mode sonore MTS V-Chip Sous-titres : 4 pm
2. .
Image
: Standard 7 4 0 0 R 0 Sortie
Intro.
Franais - 1
Dpl.
Rglage
Sortie
Dpl.
Intro.
Retour
Chane
Antenna : Air Air Prog. auto Cble Effacer les canaux brouills Liste des canaux Nom Syn. Prcise Puissance signal
2.
Appuyez sur le bouton ENTER pour slectionner Antenna. Appuyez plusieurs fois sur les bouton ou pour naviguer entre les options Air ou Cble, puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter.
Dpl.
Intro.
Retour
Rglage facile 1. 2. Appuyer sur la touche TOOLS de la tlcommande. Appuyer sur la touche ou pour choisir Commuter sur Air (ou Commuter sur Cble), puis appuyez sur le bouton ENTER .
Outils
Mode image : Mode sonore : Mise en veille Ajouter aux favoris Commuter sur Air Standard Personnel Off
Dpl.
Intro.
Sortie
Franais - 16
Enregistrement des canal dans la mmoire (mthode automatique) 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Chane, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Prog. auto, puis appuyez sur le bouton ENTER .
TV Chane
Antenna : Air Prog. auto Effacer les canaux brouills Liste des canaux Nom Syn. Prcise Puissance signal
2.
Dpl.
Intro.
Retour
.
Utilisez les bouton ou pour slectionner l'antenne souhaite, puis appuyez sur le bouton ENTER . Air: signal d'antenne de type Air. Cble: signal d'antenne de type Cble. Auto: signaux d'antenne de type Air et Cble.
TV
Prog. auto
Choisit lantenne pour excuter la fonction Programmation automatique.
Dpl. Dpl.
4.
Au moment de la slection du systme de tlvision par Cble : Appuyez sur ENTER pour amorcer la mmorisation automatique. Appuyer sur la touche ou , puis sur ou pour choisir la source du signal analogique approprie STD, HRC ou IRC. Appuyez sur le bouton ENTER . Si le Cble est numrique, slectionner la source de signal pour une diffusion analogique et numrique. STD, HRC et IRC dsignent diffrents systmes de cblodistribution. Pour connatre le systme utilis dans votre rgion, communiquez avec votre cblodistributeur. La slection de la source de diffusion est maintenant termine.
TV Analogique
Prog. auto
Choisit un type de signal de cble pour votre emplacement.
STD hRC IRC STD hRC IRC
Dmarrer
Numrique
Dpl. Dpl.
Intro. Intro.
Retour Sortie
Prog. Play Plug &auto Rglage auto . en cours DTV Cble : -Cble : 11 Cble 24 11 %
.
Le tlviseur commence alors mmoriser tous les canaux disponibles. Une fois tous les canaux mmoriss, le tlviseur commence liminer les canaux brouills (voir la page 28). Pour arrter la programmation automatique, appuyer sur ENTER . Le message Arrter Prog. auto? saffiche. Slectionner Oui en appuyant sur la touche ou , puis sur ENTER . Appuyez sur le bouton ExIT pour quitter.
Arrt
Intro. Retour
Prog. Play Plug &auto Suppression des canaux brouills. DTV Cble 80 %
Arrt
Intro. Retour
Oui
Dpl. Intro.
Non
Retour
Prog. auto Progr. Aut. termine Channels are memorized. DTV Cble : 6, Cble : 4
OK
Intro. Retour
Franais - 17
TV
Liste source Entrer le nom
Entre
: TV
2.
TV
Liste source
TV AV S-Vido Composante 1 Composante 2 PC hDMI1 hDMI2 Dpl. : ---: ------: ---: ---: ---: ---Intro. Retour
Appuyez sur le bouton SOURCE de la tlcommande pour afficher une source de signal externe.
Entre
: TV
Dpl.
Intro.
Retour
Entrer le nom
AV Composante 1 Composante 2 PC hDMI1 hDMI2 : : : : : : ------------------
2.
Appuyer sur la touche ou pour slectionner la prise dentre AV, Composante1, Composante2, PC, HDMI1, HDMI2, suivie de la touche ENTER .
Dpl.
Intro.
Retour
.
Appuyez sur les touches ou pour slectionner la source dentre Magntoscope, DVD, Cble STB, Satellite STB, PVR STB, Rcepteur A/V, Jeu, Camscope, PC, TV, IPTV, Blu-Ray, HD DVD ou Digital Media Adapter puis appuyez sur la touche ENTER . Appuyez sur le bouton ExIT pour quitter.
TV
Entrer le nom
AV Composante 1 Composante 2 PC hDMI1 hDMI2 --- ---- --- Magntoscope --- DVD ---Cble STB Satellite STB : PVR --- STB Rcepteur A/V Jeu
: : : :
Dpl.
Intro.
Retour
Franais - 18
Image
: Standard 7 4 0 0 R 0 Retour
2.
Appuyez sur le bouton ENTER pour slectionner Mode. Appuyez sur les bouton ou pour slectionner Dynamique, Standard ou Film. Dynamique : choisit limage pour la haute dfinition dans une pice claire. Standard : choisit la meilleure image possible dans un environnement normal. Film : choisit une dfinitiaon dimage pour regarder des films dans une pice sombre.
Intro.
TV
Mode Contre-jour Contraste Luminosit Nettet Couleur Teinte V 0 Plus Dpl.
Image
: Dynamic Dynamique Standard Film 0 0 R 0 Intro. Retour 7 4
.
Outils
Mode image Standard Mode sonore : Personnel Mise en veille : Off Ajouter aux favoris Commuter sur Air
Rglage facile 1. Appuyer sur la touche TOOLS de la tlcommande. 2. Appuyer sur la touche ou pour choisir Mode image. . Appuyer sur la touche ou pour slectionner loption dsire. 4. Appuyer sur la touche ExIT ou TOOLS pour quitter.
Dpl.
Rglage
Sortie
Image
: Standard 7 4 0 0 R 0 Retour
2.
.
Intro.
Contre-jour
Dpl. Rglage
7 Retour
Franais - 1
Dpl.
Intro.
Retour
Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr HDMI Mode Film : Normal : 16 : 9 : Auto : Normal : Off
Slection de la nuance de couleur 1. Suivre les instructions 1 et 2 de Activation des options dimage. (Consulter la page 20) 2. Appuyez sur les bouton ou pour slectionner Nuance coul., puis appuyez sur le bouton ENTER . . Appuyez sur le bouton ou pour slectionner Froide2, Froide1, Normal, Chaude1 ou Chaude2. Appuyez sur le bouton ENTER . Chaude1 ou Chaude2 nest active quen mode dimage Film. Les rglages peuvent tre dfinis et mmoriss pour chacun des appareils externes branchs une entre sur le tlviseur.
TV
Dpl.
Intro.
Retour
Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr hDMI Mode Film : Froide1 Froide2 Froide1 : 16: Normal : Auto Chaude1 : Normal Chaude2 : Off
Dpl.
Intro.
Retour
Rglage du format de limage Vous pouvez parfois modifier la taille de limage sur votre cran. Six tailles dcran diffrentes sont disponibles pour votre tlviseur, chacune conue pour fonctionner au mieux avec des types dentres vido spcifiques. Votre dcodeur cble ou votre rcepteur satellite peut galement disposer de ses propres tailles dcran. Toutefois, il est conseill dutiliser le mode 16:9, autant que possible. 1. Suivre les instructions 1 et 2 de Activation des options dimage. (Consulter la page 20) 2. Appuyez sur les bouton ou pour slectionner Format, puis appuyez sur le bouton ENTER . . Appuyez sur les bouton ou pour slectionner le format d'cran souhait. Appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter. 16:: Pour rgler limage en mode 16:9. Zoom1: Permet d'agrandir la taille de l'image affiche l'cran. Zoom2: Agrandit davantage la taille de limage que Zoom 1. Format large: Augmente le facteur de forme de limage pour quelle remplisse lcran en entier. 4:: Pour rgler limage en mode normal, c.--d. 4:3. Numr. seul.: Utilisez la fonction pour voir lintgralit de limage sans coupure lors de lentre de signaux HDMI (720p/1080i), Composante (1080i) ou DTV (1080i).
TV
16 : Zoom1 Zoom2 Format large 4: Numr. seul.
TV
Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr HDMI Mode Film : Normal : 16 : 9 : Auto : Normal : Off
Dpl.
Intro.
Retour
Format
Dpl.
Intro.
Retour
Franais - 20
Une rmanence d'image temporaire peut se produire si une image fixe est affiche sur l'cran pendant plus de deux heures. Aprs avoir slectionn Zoom1, Zoom2 ou Format large : Appuyer sur la touche ou pour slectionner Position, puis sur ENTER Appuyer sur la touche ou pour dplacer limage vers le bas et le haut. Rgler: Appuyer sur la touche ou pour slectionner Rgler, puis sur ENTER . Il est possible dinitialiser le rglage. .
TV
16 : Zoom1 Zoom2 Format large 4: Numr. seul.
Format
Position
Rgler
Rglage
Intro.
Retour
Aprs avoir slectionn Numr. seul. en mode hDMI (1080i) ou Composante (1080i) : Appuyer sur la touche ou pour slectionner Position hor. ou Position vert., puis sur ENTER . Appuyer sur la touche ou pour ajuster la position de limage. Appuyer sur la touche ENTER . Rgler: Appuyer sur la touche ou pour slectionner Rgler, puis sur ENTER . Il est possible dinitialiser le rglage.
TV
h-Position V-Position Rgler
Numr. seul.
0 0
HD (Haute dfinition) 16:9 - 1080i (1920x1080), 720p (1280x720) Les rglages peuvent tre dfinis et mmoriss pour chacun des appareils externes branchs une entre sur le tlviseur. Source de lentre TV, Video, Composante (480i, 480p) DTV(1080i), Composante (1080i), HDMI (720p, 1080i) PC tlcommande pour modifier la taille de limage. Format de limage 16:9, Zoom1, Zoom2, 4:3 16:9, 4:3, Format large, Numr. seul. 16:9, 4:3
Dpl.
Intro.
Retour
16:
Zoom1 U Dpl.
Zoom2 U Dpl.
Zoom1 Format d'affichage dans lequel l'cran large est agrandi verticalement.
Zoom2 Format d'affichage dans lequel l'cran Zoom1 est agrandi verticalement.
4:
Numr. seul.
Format large 4: Augmente le facteur de forme de Pour rgler limage en mode normal, limage pour quelle remplisse lcran c.--d. 4:3. en entier.
Numr. seul. Utilisez la fonction pour voir lintgralit de limage sans coupure lors de lentre de signaux HDMI (720p/1080i), Composante (1080i) ou DTV (1080i).
Franais - 21
Rglage de la rduction numrique des bruits Cette fonction rgle la luminosit du tlviseur afin de rduire la consommation d'nergie. Lorsque vous regardez la tlvision la nuit, dfinissez l'option Rduct. bruit num. sur Haute pour rduire la fatigue des yeux et la consommation d'nergie. 1. Suivre les instructions 1 et 2 de Activation des options dimage. (Consulter la page 20) 2. Appuyez sur les bouton ou pour slectionner Rduct. bruit num., puis appuyez sur le bouton ENTER . Slectionnez loption souhaite laide du bouton ou Off, Basse, Moyen, Haute, ou Auto. Appuyez sur le bouton ENTER . Off: Dsactive la fonction conomiseur dnergie. Bas: Rgle le tlviseur au mode dconomie dnergie bas. Moyen: Rgle le tlviseur au mode dconomie dnergie moyen. haute: Rgle le tlviseur au mode dconomie dnergie lev. Auto: Rgle automatiquement le niveau de brillance de lcran afin de ladapter aux scnes.
TV TV Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr HDMI Mode Film : Normal : 16 : 9 : Auto : Normal : Off
Dpl.
Intro.
Retour
Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr hDMI Mode Film : Normal : 16 : : Auto Off Basse : Normal Moyen : Off haute Auto Intro. Retour
Dpl.
Rglage du niveau de noir hDMI Il est possible de slectionner le niveau de noir de lcran afin dajuster la profondeur de lcran. 1. Suivre les instructions 1 et 2 de Activation des options dimage. (Consulter la page 20) 2. Appuyez sur les bouton ou pour slectionner Nv nr HDMI, puis appuyez sur le bouton ENTER . . Appuyez sur la touche ou pour slectionner Normal ou Basse, puis appuyez sur la touche ENTER . Normal: Limage est plus claire. Basse: Limage est plus sombre. Cette fonction est active seulement lorsquun appareil externe est branch un tlviseur par lentremise dun Cble HDMI. Il se peut que la fonction Nv nr HDMI ne soit pas compatible avec tous les appareils externes. Appuyez sur la touche ExIT pour quitter le menu.
TV TV Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr HDMI Mode Film : Normal : 16 : 9 : Auto : Basse : Off
Dpl.
Intro.
Retour
Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr hDMI Mode Film : Normal : 16 : : Auto : Normal Normal Basse : Off
Dpl.
Intro.
Retour
Rglage du Mode Film Il est possible de rgler le tlviseur afin quil dtecte et traite automatiquement les signaux de film provenant de toutes les sources et rgle limage pour obtenir une dfinition optimale. 1. Suivre les instructions 1 et 2 de Activation des options dimage. (Consulter la page 20) 2. Appuyez sur les bouton ou pour slectionner Mode Film, puis appuyez sur le bouton ENTER . . Appuyez sur la touche ou pour slectionner "Off" or "Auto", puis appuyez sur la touche ENTER . Appuyez sur la touche ExIT pour quitter le menu. Le mode "Mode Film" est disponible dans les modes TV, VIDO, et COMPOSANTE (480i / 1080i) et HDMI (480i / 1080i).
Dpl. Intro. Retour
TV
Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr HDMI Mode Film : Normal : 16 : 9 : Auto : Normal : Off
TV
Options dimage
Nuance coul. Format Rduct. bruit num. Nv nr hDMI Mode Film : Normal : 16 : : Auto : Normal : Off Off Auto
Dpl.
Intro.
Retour
Franais - 22
Dpl.
Intro.
Retour
Franais - 2
2. Appuyez sur les boutons ENTER pour slectionner Mode. Appuyez sur les bouton ou pour slectionner le rglage du son "Standard, Musique, Cinma, Parole ou Personn.", puis appuyez sur ENTER . Appuyez sur le bouton ExIT pour quitter. Standard : choisit le mode sonore normal. Musique : accentue la musique par rapport aux dialogues. Film : offre le meilleur son pour les films. Parole : accentue les dialogues par rapport aux autres sons. Personnel : rappelle les rglages sonores personnaliss. (Reportez-vous la rubrique Personnalisation du son)
Dpl.
Intro.
Retour
TV
Son
Mode : Custom Standard galiseur Musique SRS TruSurround xT : Off Film Options multi-pistes Parole Volume auto : Off Personnel haut-parleur TV : On
Dpl.
Intro.
Retour
Rglage facile 1. 2. . 4. Appuyer sur la touche TOOLS de la tlcommande. Appuyer sur la touche ou pour choisir Mode sonore. Appuyer sur la touche ou pour slectionner loption dsire. Appuyer sur la touche ExIT ou TOOLS pour quitter.
Outils
Mode image : Standard Mode sonore Personnel Mise en veille : Off Ajouter aux favoris Commuter sur Air
Dpl.
Rglage
Sortie
Personnalisation du son
Les paramtres du son peuvent tre rgls selon vos prfrences personnelles. (sinon, vous pouvez utiliser lun des paramtres automatiques.) 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Son, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner galiseur, puis appuyez sur le bouton ENTER .
TV Son
Mode : Personnel galiseur SRS TruSurround xT : Off Options multi-pistes Volume auto : Off haut-parleur TV : On
2.
Dpl.
Intro.
Retour
.
Appuyez sur les bouton ou pour slec tionner la frquence rgler. Utilisez les bouton ou pour aug menter ou diminuer le niveau de la frquence slectionne. Appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter. Rglage G/D de la balance: Pour rgler la balance des haut-parleurs G/D. Rglage de la bande passante (100hz,00hz, 1Khz, Khz, 10Khz): Pour rgler les diffrentes frquences de bande passante. Si vous changez de quelque faon que ce soit les rglages de galiseur, le mode son devient automatiquement Personnel.
TV
D + 0 G
Balance
galiseur
Dpl.
Rglage
Retour
Franais - 24
2.
Dpl.
Intro.
Retour
.
Appuyez sur les bouton ou pour slectionner Off ou On, puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter. TruSurround xT, SRS et le symbole sont des marques commerciales de SRS Labs, Inc. La technologie TruSurround xT est intgre sous licence de SRS Labs, Inc. Appuyez sur le bouton SRS de la tlcommande pour slectionner Off ou On.
TV
Son
Mode : Personnel galiseur SRS TruSurround xT : Off Off Options multi-pistes On Volume auto : Off haut-parleur TV : On
Dpl.
Intro.
Retour
TV
Son
Mode : Personnel galiseur SRS TruSurround xT : Off Options multi-pistes Volume auto : Off haut-parleur TV : On
Dpl.
Intro.
Retour
TV
Options multi-pistes
Langue privilgie Son multi-piste : Franais : Stro
Options multi-pistes
: English English : Stereo Espaol Franais
Dpl.
Intro.
Retour
Il est possible dcouter lmission dans une langue autre que la langue privilgie en appuyant sur la touche MTS de la tlcommande.
Franais - 2
TV
Options multi-pistes
Langue privilgie Son multi-piste : English : Stro
2.
.
TV
Options multi-pistes
Langue privilgie Son multi-piste : English : Stereo Mono Stro SAP
Dpl.
Intro.
Retour
2.
Dpl.
Intro.
Retour
.
Appuyez sur les bouton ou pour slectionner Off ou On, puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter.
TV
Son
Mode : Personnel galiseur SRS TruSurround xT : Off Options multi-pistes Volume auto : Off Off haut-parleur TV : On On
Dpl.
Intro.
Retour
Franais - 26
Dpl.
Intro.
Retour
.
Appuyez sur les bouton ou pour slectionner Off, puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter. Lorsque la fonction Haut-parleur TV est rgle Off , les paramtres du menu Son ne peuvent tre configurs, lexception des Options multi-pistes. Les touches VOL rgl Off. , VOL ne fonctionnent pas lorsque Haut-parleur TV est
Internal haut-parleur hF AV Sortie de haut-parleur Mute Mute Composante, PC, hDMI Sortie de haut-parleur Mute Mute
TV
Son
Mode : Personnel galiseur SRS TruSurround xT : Off Options multi-pistes Volume auto : Off haut-parleur TV : On Off On Dpl. Intro. Retour
Sortie audio optique (sortie G/D) vers la chane audio hF Sortie audio Sortie audio Mute AV Sortie audio Sortie audio Mute Composante, PC, hDMI Sortie audio Sortie audio Mute
Fabriqu sous licence par Dolby Laboratories. Dolby et le symbole en forme de double D sont des marques dposes de Dolby Laboratories.
Franais - 27
2.
Appuyez sur les bouton ou pour slectionner Effacer les canaux brouills, puis appuyez sur le bouton ENTER . Cette procdure permet de dtecter les canaux brouills qui doivent tre supprims de la liste. Pour arrter la fonction de recherche des canaux brouills Appuyez sur les bouton ENTER pour slectionner "Arrt". Appuyez sur les bouton pour slectionner "Oui", puis appuyez sur le bouton ENTER .
Dpl.
Intro.
Retour
Autocanaux brouills Effacer PlugProgram les & Play Suppression des canaux brouills. DTV Cble 40 0 %
Arrt
Intro. Retour
.
Lorsque la recherche de canaux brouills est termine, appuyez sur ENTER Appuyez sur la touche ExIT pour quitter le menu. Cette fonction nest accessible quen mode Cble.
Franais - 28
2.
Dpl.
Intro.
Retour
.
TV
Tout Aiout Favori
Dpl.
Intro.
Retour
4.
Appuyez sur les bouton , , ou pour slectionner une chane supprimer, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Supprimer, puis appuyez sur le bouton ENTER pour supprimer la chane. Le symbole disparat.
Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 Mode liste Dpl. Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 Mode liste Dpl.
1/2 DTV Air 10-1 DTV Air 10-2 DTV Air 10- Air 12 DTV Air 1-1 DTV Air 1-2 DTV Air 1- DTV Air 1-4 Supprimer tout
Retour 1/2 DTV Air 10-1 DTV Air 10-2 DTV Air 10- Air 12 DTV Air 1-1 DTV Air 1-2 DTV Air 1- DTV Air 1-4 Supprimer tout Retour 1/2 DTV Air 10-1 DTV Air 10-2 DTV Air 10- Air 12 DTV Air 1-1 DTV Air 1-2 DTV Air 1- DTV Air 1-4 Supprimer tout Retour 1/2 DTV Air 10-1 DTV Air 10-2 DTV Air 10- Air 12 DTV Air 1-1 DTV Air 1-2 DTV Air 1- DTV Air 1-4 Supprimer tout Retour
.
Appuyez sur les bouton , , ou pour slectionner une chane ajouter, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Ajoute, puis appuyez sur le bouton ENTER pour supprimer la chane. Le symbole saffiche et le canal sera ajout. Appuyez sur le bouton ExIT pour quitter. Toutes les chanes slectionnes apparaissent comme Ajoute. Touche rouge : appuyer plusieurs fois pour slectionner Tout, Aiout ou Favori. Touche verte : appuyer pour ajouter tous les canaux supprims. Touche jaune : appuyer pour supprimer tous les canaux en mmoire.
Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 Mode liste Dpl. Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 Mode liste Dpl.
Franais - 2
TV
Chane
Antenna : Cble Prog. auto Effacer les canaux brouills Liste des canaux Nom Syn. Prcise Puissance signal
2.
Dpl.
Intro.
Retour
.
Appuyez sur les bouton ou pour slectionner Tout ou Ajout, puis appuyez sur le bouton ENTER .
Dpl. Intro. Retour
Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 Mode liste Dpl. Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 Mode liste Dpl.
1/2
4.
Appuyez sur les bouton , , ou pour slectionner vos chanes favorites parmi les chanes rpertories. Puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Favori, puis appuyez sur le bouton ENTER . Le symbole sera alors mis en surbrillance et la chane sera enregistre dans les Favoris. Pour annuler votre slection de chanes prfres, appuyez sur le bouton ENTER jusqu' ce que le symbole ne soit plus en surbril lance. Appuyez sur le bouton ExIT pour quitter. Seules les chanes dj en mmoire peuvent faire partie de vos chanes favorites. Toutes vos chanes prfres apparaissent comme Favori.
DTV Air 10-1 DTV Air 10-2 DTV Air 10- Air 12 DTV Air 1-1 DTV Air 1-2 DTV Air 1- DTV Air 1-4 Supprimer tout Retour 1/2 DTV Air 10-1 DTV Air 10-2 DTV Air 10- Air 12 DTV Air 1-1 DTV Air 1-2 DTV Air 1- DTV Air 1-4 Supprimer tout Retour
Pour slectionner les chanes favorites que vous avez configures, appuyez sur le bouton FAV.Ch de la tlcommande.
Rglage facile 1. Appuyer sur la touche TOOLS de la tlcommande. 2. Appuyez sur les bouton ou pour slectionner Ajouter aux favoris (ou Effacer des Favori), puis appuyez sur le bouton ENTER . Le canal slectionn est ajout la liste des favoris (ou en est supprim).
Outils
Mode image : Mode sonore : Mise en veille : Ajouter aux favoris Commuter sur Air Standard Personnel Off
Dpl.
Intro.
Sortie
Franais - 0
2.
.
Appuyez sur les bouton ou pour slectionner Tout, Ajoute ou Favori puis appuyez sur le bouton ENTER .
Dpl.
Intro.
Retour
TV
Tout Aiout Favori
4.
Appuyez sur les bouton ou pour slectionner Chane, puis appuyez sur le bouton ENTER . Pour basculer entre toutes les chanes, les chanes ajoutes ou vos chanes favorites, utilisez le bouton Rouge de la tlcommande. Touche rouge : appuyer plusieurs fois pour slectionner Tout, Aiout ou Favori.
Air DTV Air 2-1 Air Air4 Air Air 6 Air 7 DTV Air 7-1 Air 8 Mode liste Dpl. Intro.
Dpl.
Intro.
Retour
1/2 DTV Air 10-1 DTV Air 10-2 DTV Air 10- Air 12 DTV Air 1-1 DTV Air 1-2 DTV Air 1- DTV Air 1-4 Supprimer tout
Retour
Franais - 1
2.
Utilisez les bouton ou pour slec tionner la chane renom mer, puis appuyez sur le bouton ENTER . Utilisez les bouton ou pour slec tionner une lettre, un chiffre ou un espace (squence de rsultat: A...Z, 0...9, +, -, *, /, espace). Appuyez sur le bouton pour passer au champ suivant, qui sera alors slectionn. Choisissez un deuxime caractre, lettre ou chiffre, l'aide des bouton ou , comme indiqu ci-dessus. Recommencez cette opration pour slectionner les trois derniers chiffres. Lorsque vous avez termin, appuyez sur le bouton ENTER pour valider le nouveau nom. Pour effacer le nouveau nom assign, slectionnez Effacer en appuyant sur le bouton ou puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter. Les noms des canaux numriques sont automatiquement assigns et ne peuvent tre identifis.
Dpl.
Intro.
Retour
TV
Air Air Air Air Air 2 4 6 Dpl.
Nom
Effacer Effacer Effacer Effacer Effacer Intro. Retour
TV
Air Air Air Air Air 2 4 6 Dpl.
A
Nom
Effacer Effacer Effacer Effacer Effacer Rglage Retour
Franais - 2
2.
Dpl.
Intro.
Retour
.
Utilisez les bouton ou pour rgler la syntonisation fine. Pour mmoriser les rglages de syntonisation fine, appuyez sur le bouton ENTER Si vous ne conservez pas de chanes syntonises dans la mmoire, les rglages ne sont pas enregistrs.
.
Rglage
Rgler
Enregistrer Retour
4.
Pour rinitialiser les rglages de syntonisation fine, appuyez sur le bouton et slectionnez Rgler, puis appuyez sur ENTER . Appuyez sur le bouton ExIT pour quitter. Le symbole * apparat ct du nom des chanes syntonises.
Rgler
Rglage Enregistrer Retour
Rgler
Dpl. Intro. Retour
2.
Dpl.
Intro.
Retour
Puissance signal
OK
Intro.
Retour
Franais -
Modes daffichage
Si le signal du systme quivaut au mode de signal standard, lcran se rgle automatiquement. Si le signal du systme ne correspond pas au mode de signal standard, rglez le mode en vous reportant le cas chant au manuel dutilisation de la carte vido. Pour les modes daffichage figurant ci-dessous, limage de lcran a t optimise lors de la fabrication. Entre D-Sub Mode IBM Rsolution 640x350 720400 640480 640480 640480 800600 800600 800600 1024768 1024768 1024768 1360 x 768 Frquence horizontale (khz) 31,469 31,469 31,469 37,861 37,500 37,879 48,077 46,875 48,363 56,476 60,023 47,712 Frquence verticale (hz) 70,086 70,087 59,940 72,809 75,000 60,317 72,188 75,000 60,004 70,069 75,029 60,015 Frquence verticale (hz) 25,175 28,322 25,175 31,500 31,500 40,000 50,000 49,500 65,000 75,000 78,750 85,500 Polarit synchronise (h/V) +/-/+ -/-/-/+/+ +/+ +/+ -/-/+/+ +/+
VESA
Entre hDMI/DVI Mode Rsolution 640480 800600 1024768 1360 x 768 Frquence horizontale (khz) 31,469 37,879 48,363 47,712 Frquence verticale (hz) 59,940 60,317 60,004 60,015 Frquence verticale (hz) 25,175 40,000 65,000 85,500 Polarit synchronise (h/V) -/+/+ -/+/+
VESA
Franais - 4
Outils
Mode image : Standard Mode sonore : Personnel Mise en veille Off Rglage auto. en cours
2.
Appuyez sur les bouton ou pour slectionner Rglage auto. en cours, puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter. Rglage facile 1. Appuyer sur la touche TOOLS de la tlcommande. 2. Appuyez sur les bouton ou pour slectionner Rglage auto. en cours, puis appuyez sur le bouton ENTER .
Dpl.
Intro.
Sortie
Rglage de la qualit de lcran Le but du rglage de la qualit de limage est dliminer ou de rduire le bruit de limage (dfauts). Si le bruit nest pas limin en effectuant uniquement une syntonisation fine, rglez nouveau la frquence pour une syntonisation plus fine. Une fois le bruit rduit, rajustez limage pour la centrer sur lcran. Prrglage : Appuyer sur la touche SOURCE pour slectionner PC. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Image, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner cran, puis appuyez sur le bouton ENTER .
TV Image
Mode : Standard Contre-jour Contraste Luminosit Nettet Rglage auto. en cours cran Plus Dpl. Intro. 7 4 0 Retour
PC
Verrouiller limage Position Rtablir limage Rsolution
cran
: 160 x 768 @ 60hz
2. .
Appuyez sur les boutonsou ou pour slectionner Grain ou Affin, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour rgler la qualit de lcran. Des bandes verticales peuvent apparatre ou limage peut devenir floue. Appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter.
PC
Dpl.
Intro.
Retour
Grain
Dpl. Rglage
0 Retour
Franais -
Changement de la position de lcran Rgler la position de lcran de lordinateur sil ne correspond pas celui du tlviseur Prrglage : Appuyer sur la touche SOURCE pour slectionner PC. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Image, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner cran, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Position, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour rgler Position vert. Appuyez sur les bouton ou pour rgler Position hor. Appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter.
Dpl. Intro. Retour
PC
Verrouiller limage Position Rtablir limage Rsolution
cran
: 160 x 768 @ 60hz
2. .
Dpl.
Intro.
Retour
TV
Position
Initialisation de la position de limage, rapide et fin Vous pouvez remplacer tous les paramtres dimage par les valeurs par dfaut. Prrglage : Appuyer sur la touche SOURCE pour slectionner PC. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Image, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner cran, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Rtablir l'image, puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter.
PC
Verrouiller limage Position Rtablir limage Rsolution
cran
: 160 x 768 @ 60hz
2.
Dpl.
Intro.
Retour
PC
Verrouiller limage Position Rtablir limage Rsolution
cran
: 160 x 768 @ 60hz
Dpl.
Intro.
Retour
Franais - 6
Configuration
Retour
TV
heure
--/--/----/--:-- -horloge Mise en veille Minuterie 1 Minuterie 2 Minuterie Dpl. : Off : Dsactiv : Dsactiv : Dsactiv Intro. Retour
TV
horloge
Mode horloge Rglage horloge Fuseau hor. h. d t : Manual Auto Manuel : Off
pour slectionner Mode horloge. . Appuyez sur les boutons ENTER Appuyez sur les bouton ou pour slectionner Manuel, puis appuyez sur le bouton ENTER .
Dpl.
Intro.
Retour
TV
horloge
Mode horloge Rglage horloge Fuseau hor. h. d t : Manuel
4. Appuyez sur les bouton ou pour slectionner Rglage Horloge, puis appuyezsur le bouton ENTER .
: Off
Dpl.
Intro.
Retour
TV
Rglage horloge
Entrez la date et lheure en cours. Mois
. Appuyez sur les bouton ou pour nav iguer entre les paramtres Mois, Jour, Anne, Heure, Minute, ou am/pm. Dfinissez la date et l'heure souhaites en utilisant les bouton ou puis appuyez sur ENTER . Appuyez sur le bouton ExIT pour quitter. L'heure s'affiche chaque fois que vous appuyez sur le bouton INFO. Vous pouvez rgler directement le mois, le jour, les heures et les minutes en appuyant sur les boutons numriques de la tlcommande.
Jour
Anne
heure
Minute
am/pm
Dpl.
Rglage
Retour
TV
Mois
01
Rglage horloge
Entrez la date et lheure en cours. Jour
01
Anne
2008
heure
12
Minute
00
am/pm
am
Dpl.
Rglage
Retour
Franais - 7
Option 2: Rglage Automatiquement de l'horloge Lhorloge peut tre automatiquement rgle si vous recevez un signal numrique. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Heure, puis appuyez sur le bouton ENTER . 2. Appuyez sur les boutons ENTER pour slectionner Horloge.
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie
Configuration
: Franais : Moyen Retour
TV
horloge Mise en veille Minuterie 1 Minuterie 2 Minuterie Dpl.
heure
--/--/----/--:-- - : Off : Dsactiv : Dsactiv : Dsactiv Intro. Retour
. Appuyez sur les boutons ENTER pour slectionner Mode horloge. Appuyez sur les bouton ou pour slectionner Auto, puis appuyez sur le bouton ENTER .
TV
Mode horloge Rglage horloge Fuseau hor. h. d t
horloge
: Manual Auto Manuel : Off
Dpl.
Intro.
Retour
TV
horloge
Mode horloge Rglage horloge Fuseau hor. h. d t : Auto
4. Appuyez sur les bouton ou pour slectionner Fuseau hor., puis appuyez sur le bouton ENTER .
: Off
Dpl.
Intro.
Retour
Rglage horloge
Choisir le fuseau horaire dans lequel vous vivez.
. Appuyez sur les bouton ou pour slectionner le fuseau horaire de votre rgion, puis appuyez sur le bouton ENTER .
Dpl.
Intro.
Retour
TV
horloge
Mode horloge Rglage horloge Fuseau hor. h. d t : Auto
6. Appuyez sur les bouton ou pour slectionner H. d t, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Off ou On, puis appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter. En fonction de la station mettrice et du signal, il est possible que la fonction de rglage automatique de l'heure ne fonctionne pas correctement. Dans un tel cas, rglez l'horloge manuelle ment. L'antenne ou le cble doit tre branch pour que le rglage automatiquement de l'horloge se fasse.
TV
: Off
Dpl.
Intro.
Retour
horloge
Mode horloge Rglage horloge Fuseau hor. h. d t : Auto
: Off Off On
Dpl.
Intro.
Retour
Franais - 8
Paramtrer le minuteur Cette minuterie teint automatiquement le tlviseur aprs le dlai choisi (de 30, 60, 90, 120, 150 180 minutes). 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Heure, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Mise en veille, puis appuyez sur le bouton ENTER .
TV TV
horloge Mise en veille Minuterie 1 Minuterie 2 Minuterie Dpl. : Off : Dsactiv : Dsactiv : Dsactiv Intro.
heure
1/ 1/2008 12 : 00 am Retour
2.
Mise en veille
Rgle les options de la minuterie de mise en veille. Minute
.
Utilisez les bouton ou pour rgler le paramtre Minute, puis appuyez sur le bouton ENTER . Lorsquon rgle la minuterie, la fonction Activation est rgle On automatiquement. Pour annuler la mise en veille : Appuyez sur le bouton ou pour slectionner Activation. Appuyer sur la touche ou pour slectionner Off, suivie de la touche ENTER . Appuyez sur le bouton ExIT pour quitter.
TV
Activation
Off
Dpl.
Rglage
Retour
Mise en veille
Rgle les options de la minuterie de mise en veille. Minute Activation
0
On
Dpl.
Rglage
Retour
Rglage facile 1. 2. . 4. Appuyer sur la touche TOOLS de la tlcommande. Appuyer sur la touche ou pour choisir Mise en veille. Appuyer sur la touche ou pour slectionner les minutes. Appuyer sur la touche ExIT ou TOOLS pour quitter.
Outils
Mode image : Standard Mode sonore : Personnel Mise en veille Off Ajouter aux favoris Commuter sur Air
Dpl.
Rglage
Sortie
Franais -
Rglage de la minuterie de mise en marche/arrt 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slectionner Heure, puis appuyez sur le bouton ENTER . Trois rglages de minuterie (mise en marche/arrt) peuvent tre effectus. Appuyer sur la touche ou pour slectionner Minuterie 1, Minuterie 2 ou Minuterie 3, puis sur ENTER .
TV
horloge Mise en veille Minuterie 1 Minuterie 2 Minuterie Dpl.
heure
1/ 1/2008 12 : 00 am : Off : Dsactiv : Dsactiv : Dsactiv Intro. Retour
2.
.
Appuyer sur la touche ou pour slectionner llment dsir ci-dessous. Appuyer sur la touche ou pour ajuster ce paramtre. Mise en marche: Slectionner lheure, les minutes, am/pm et Activ/ Dsactiv. (Pour activer la minuterie avec le rglage choisi, slectionner Activ). Arrt: Slectionner lheure, les minutes, am/pm et Activ/Dsactiv. (Pour activer la minuterie avec le rglage choisi, slectionner Activ). Volume: Slectionner le niveau sonore dsir. Chane: slectionne le canal dsir. Rpter: Choisir Une fois, Tous les jours, Lundi-vendredi, Lundisamedi, Sam. dim., ou Manuel. Lorsque Manuel est choisi, appuyer sur la touche pour choisir le jour appropri de la semaine. Appuyer sur la touche ENTER sur le jour voulu et la marque saffichera. Appuyez sur le bouton ExIT pour quitter. Vous pouvez rgler les heures, les minutes et les chanes directement laide du pav numrique de la tlcommande. Arrt automatique Quand la minuterie est active, le tlviseur steint automatiquement au bout de trois heures si aucune commande nest utilise. Cette fonction est disponible uniquement lorsque la minuterie est dfinie sur On ; elle permet dviter toute surchauffe occasionne par une utilisation prolonge du tlviseur.
Minuterie 1
Mise en marche Arrt Volume Rpter Une fois Dpl. Rglage Retour 12
: : 10
00 00
am am Chane
12
Configuration
: Franais Retour
V-Chip Sous-titres Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro.
2.
Utilisez les bouton ou pour slectionner la langue de votre choix English, Espaol ou Franais. Appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter.
TV
Configuration
Prt lemploi Langue : Franais English heure Espaol V-Chip Franais Sous-titres Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro. Retour
Franais - 40
Rglage de votre numro didentification personnel (NIP) 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . 2. Appuyez sur les bouton ou pour slectionner V-Chip, puis appuyez sur le bouton ENTER . Le message Entrez NIP s'affiche. Saisissez votre code NIP 4 chiffres. Le code NIP par dfaut d'un nouveau tlviseur est 0-0-0-0.
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie
Configuration
: Franais : Moyen Retour
TV
Entrez NIP * * *
V-Chip
Retour
.
L'cran V-Chip s'affiche. Appuyez sur les bouton ou pour slectionner Changer NIP, puis appuyez sur le bouton ENTER . L'cran Changer NIP s'affiche. Choisissez un code NIP 4 chiffres et saisissez-le. Lorsque vous avez entr le code NIP, l'cran Confirmer NIP apparat. Saisissez de nouveau le code. Lorsque l'cran de confirmation disparat, votre code NIP est mmoris. Appuyez sur le bouton ExIT pour quitter. Si vous oubliez votre code NIP, appuyez sur les touches de la tlcommande lorsque lappareil est teint) dans lordre suivant afin de remettre le code NIP 0-0-0-0: Power Off (hors tension). MUTE 8 2 4 Power On (sous tension).
TV
Blocage V-Chip : Off Contrle parental TV Classif. MPAA Anglais canadien Franais canadien Catg. amricaine tlchargeable Changer NIP Dpl. Intro.
Retour
Changer NIP
Nouveau NIP
Confirmer NIP
.. Entrez NIP
Retour
Franais - 41
Comment activer/dsactiver la fonction puce V 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . 2. Appuyez sur les bouton ou pour slectionner V-Chip, puis appuyez sur le bouton ENTER . Le message Entrez NIP s'affiche. Saisissez votre code NIP 4 chiffres.
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro. : Franais
Configuration
Retour
TV
Entrez NIP * * *
V-Chip
.. Entrez NIP
Retour
.
Lcran V-Chip apparat. Pour activer la fonction puce V, appuyez sur le bouton ENTER pour rgler le Blocage V-Chip sur On. (Appuyer plusieurs fois sur les bouton ou alterne entre les modes On et Off.) Appuyez sur le bouton ENTER . Appuyez sur le bouton ExIT pour quitter.
TV
Blocage V-Chip
V-Chip
: Off Retour Contrle parental TV Classif. MPAA Anglais canadien Franais canadien Catg. amricaine tlchargeable Changer NIP Dpl. Intro.
TV
V-Chip
Blocage V-Chip : off Off On Contrle parental TV Classif. MPAA Anglais canadien Franais canadien Catg. amricaine tlchargeable Changer NIP Dpl. Intro. Retour
Comment configurer les restrictions laide des Contrle parental TV Rglez dabord le numro didentification personnel (NIP) et activez la fonction puce V. (Voir section prcdente). Les restrictions parentales peuvent tre rgles laide de lune de ces deux mthodes: Les guides TV ou la Classification MPAA. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . 2. Appuyez sur les bouton ou pour slectionner V-Chip, puis appuyez sur le bouton ENTER . Le message Entrez NIP s'affiche. Saisissez votre code NIP 4 chiffres.
TV
Entrez NIP * * *
TV
Prt lemploi Langue Heure V-Chip Sous-titres
Configuration
: Franais Retour
Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro.
V-Chip
.. Entrez NIP
Retour
Franais - 42
. L'cran V-Chip s'affiche. Appuyez sur les bouton ou pour slectionner Contrle parental TV, puis appuyez sur le bouton ENTER .
TV
Blocage V-Chip
V-Chip
: On Retour Contrle parental TV Classif. MPAA Anglais canadien Franais canadien Catg. amricaine tlchargeable Changer NIP
4. L'cran Contrle parental TV apparat. Utilisez les bouton ou pour slectionner l'une des six catgories tablies en fonction de l'ge: TV-Y: Jeunes enfants TV-Y7: Enfants de 7 ans et plus TV-G: Tout public TV-PG: Accord parental TV-14: Tlspectateurs de 14 ans et plus TV-MA: Public averti
Dpl.
Intro.
TV
TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA
Contrle parental TV
ALL FV V S L D Perm. tout Bloq. tout
Dpl.
Intro.
Retour
. A ce stade, une des valuations TV est choisie. Appuyez sur le bouton ENTER . En fonction de la configuration choisie, un symbole est slectionn. (Espace = dbloqu, = bloqu) Si le symbole est slectionn, appuyez sur le bouton ENTER pour bloquer ou dbloquer la catgorie. Pour slectionner une autre valuation TV, appuyez sur les bouton ou puis rptez la procdure. Perm. Tout: dverrouille tous les rglages du tlviseur. Bloq. Tout: verrouille tous les rglages du tlviseur. TV-Y, TV-Y7, TV-G, TV-PG, TV-14, et TV-MA disposent doptions supplmentaires. Voir ltape suivante pour changer une des valuations secondaires suivantes: FV: Fantastique Violence / D: Sexual suggestive Dialog / L: Langage adulte / S: Scnes de sexe / V: Violence La fonction V-Chip bloque automatiquement certaines catgories qui sont plus restric tives. Par exemple, si vous bloquez la catgorie TV-Y, la catgorie TVY7 sera alors bloque automatiquement. De la mme faon, si vous bloquez la catgorie TV-G, toutes les catgories dans le groupe jeunes adultes seront alors bloques (TV-G, TV-PG, TV-14 et TV-MA). Les valuations secondaires (D, L, S, V) fonctionnent de la mme faon. (voir section suivante.) 6. Comment rgler les valuations secondaires FV, D, L, S et V. Pour commencer, slectionnez l'une des catgories: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, ou TV-MA (voir tape 4) et appuyez sur le bouton . Un symbole apparat pour chaque sous-catgorie. Lorsque le symbole est slectionn, appuyez sur le bouton ENTER pour accder une sous-catgorie. Appuyez sur ENTER pour bloquer la sous-catgorie. Pour s lectionner une autre valuation TV, appuyez sur les bouton ou puis rptez la procdure. ALL: Bloquer toutes les classifications. FV: Fantastique Violence V: Violence S: Scnes de sexe L: Langage adulte D: Sexual suggestive Dialog La fonction V-Chip bloque automatiquement certaines catgories qui sont plus restrictives. Par exemple, si vous bloquez lvaluation secondaire L dans TV-PG, les valuations secondaires L dans TV-14 et TV-MA sont bloques `automatiquement. 7. Appuyez sur le bouton ExIT pour effacer tous les crans (ou bien passez la section suivante et dfinissez des restrictions supplmentaires bases sur les codes MPAA). Ces catgories se composent de deux grands groupes: TV-Y et TV-Y7 (jusqu' 7 ans) et TV-G TV-MA (tous les autres). Les restrictions applicables ces deux groupes sont indpendantes: si une famille compte de trs jeunes enfants ainsi que des jeunes adultes, les catgories doivent tre dfinies sparment (voir prochaine tape).
Franais - 4
TV
TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA
Contrle parental TV
ALL FV V S L D Perm. tout Bloq. tout
Dpl.
Intro.
Retour
Comment configurer les restrictions laide des valuations MPAA: G, PG, PG-13, R, NC-17, X, NR Le systme dvaluation MPAA utilise le systme de la Motion Picture Association of America (Association cinmatographique amricaine) (MPAA) dont la principale application concerne les films. (il arrive galement que des vidocassettes de films soient cryptes laide des valuations MPAA). Quand le verrouillage V-Chip est activ, la tlvision bloque automatiquement tout programme cod avec des valuations restrictives (valuations MPAA ou TV). 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . 2. Appuyez sur les bouton ou pour slectionner V-Chip, puis appuyez sur le bouton ENTER . Le message Entrez NIP s'affiche. Saisissez votre code NIP 4 chiffres. . Lcran V-Chip apparat. Appuyez sur les bouton ou pour slectionner Classif. MPAA, puis appuyez sur le bouton ENTER .
TV
Entrez NIP * * *
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie
Configuration
: Franais : Moyen Intro. Retour
V-Chip
Retour
Retour
Anglais canadien Franais canadien Catg. amricaine tlchargeable Changer NIP Dpl. Intro.
TV
G PG PG-1 R NC-17 x NR
Classif. MPAA
Block
Dpl.
Intro.
Retour
4. L'cran Classif. MPAA s'affiche. Appuyez plusieurs fois sur les bouton ou pour slectionner une catgorie MPAA spcifique. Utilisez de nouveau les boutons ou pour parcourir les catgories MPAA: G: Tout public (aucune restriction). PG: Accord parental souhait. PG-1: Parents vivement mis en garde. R: Les enfants de moins de 17ans doivent tre accompag ns dun adulte. NC-17: Aucun enfant de moins de 17 ans. x: Adultes uniquement. NR: Non valu. Perm. Tout: dverrouille tous les rglages du tlviseur. Bloq. Tout: verrouille tous les rglages du tlviseur. Lorsqu'une catgorie spcifique est slectionne, appuyez sur le bouton ENTER pour l'activer. Un symbole s'affiche. Appuyez sur le bouton ENTER pour bloquer ou dbloquer la catgorie. La fonction V-Chip bloque automatiquement toutes catgories qui sont plus restrictives. Par exemple, si vous bloquez PG-13, alors R, NC-17 et X sont galement bloqus automatiquement. Appuyez sur le bouton ExIT pour quitter.
TV
G PG PG-1 R NC-17 x NR
Classif. MPAA
Block
Dpl.
Intro.
Retour
Franais - 44
Comment configurer les restrictions laide des Anglais canadien 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . 2. Appuyez sur les bouton ou pour slectionner V-Chip, puis appuyez sur le bouton ENTER . Le message Entrez NIP s'affiche. Saisissez votre code NIP 4 chiffres.
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro. : Franais
Configuration
Retour
TV
Entrez NIP * * *
V-Chip
.. Entrez NIP
Retour
. Lcran V-Chip apparat. Appuyez sur les bouton ou pour slectionner Anglais canadien, puis appuyez sur le bouton ENTER .
TV
Blocage V-Chip
V-Chip
: On Retour Contrle parental TV Classif. MPAA Anglais canadien Franais canadien Catg. amricaine tlchargeable Changer NIP Dpl. Intro.
4. Appuyez sur la touche ou pour entrer une restriction approprie. Appuyez sur la touche ENTER pour activer la restriction slectionne. Le saffiche. Appuyez sur le bouton ExIT pour quitter. Perm. Tout: Dvverrouille tous les rglages du tlviseur. Bloq. Tout: Verrouille tous les rglages du tlviseur. C : missions destines aux enfants de moins de 8 ans. C8+ : missions convenant gnralement aux enfants de 8 ans et plus, sans surveillance. G : missions grand public convenant tous les auditoires. PG : missions surveillance parentale. 14+ : missions dont la teneur peut ne pas convenir, en tout ou en partie, aux personnes de moins de 14 ans. 18+ : missions pour adultes. La fonction V-Chip bloque automatiquement toutes les catgories qui sont plus restrictives. Par exemple, si vous verrouillez la catgorie G, PG, 14+ et 18+ seront automatiquement verrouilles.
TV
C C8+ G PG 14+ 18+
Anglais canadien
Block
Dpl.
Intro.
Retour
TV
C C8+ G PG 14+ 18+
Anglais canadien
Block
Dpl.
Intro.
Retour
Franais - 4
Comment configurer les restrictions laide des Franais canadien 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . 2. Appuyez sur les bouton ou pour slectionner V-Chip, puis appuyez sur le bouton ENTER . Le message Entrez NIP s'affiche. Saisissez votre code NIP 4 chiffres.
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro. : Franais
Configuration
Retour
TV
Entrez NIP * * *
V-Chip
.. Entrez NIP
Retour
. Lcran V-Chip apparat. Appuyez sur les bouton ou pour slectionner Franais canadien, puis appuyez sur le bouton ENTER .
TV
V-Chip
Blocage V-Chip Contrle parental TV MAPP Rating Anglais canadien : On Retour
4. Appuyez sur la touche ou pour entrer une restriction approprie. Appuyez sur la touche ENTER pour activer la restriction slectionne. Le saffiche. Appuyez sur le bouton ExIT pour quitter. Perm. Tout: Dvverrouille tous les rglages du tlviseur. Bloq. Tout: Verrouille tous les rglages du tlviseur. G: Gnral. 8 ans+: missions non recommandes pour les jeunes enfants. 1 ans+: missions pouvant ne pas convenir aux enfants de moins de 13 ans. 16 ans+: missions ne convenant pas aux enfants de moins de 16 ans. 18 ans+: missions rserves aux adultes. La fonction V-Chip bloque automatiquement toutes les catgories qui sont plus restrictives. Par exemple, si la classification 8 ans+ est bloque, les classifications 13 ans+, 16 ans+ et 18 ans+ sont automatiquement bloques.
TV
G 8 ans+ 1 ans+ 16 ans+ 18 ans+
Franais canadien
Block
Dpl.
Intro.
Retour
TV
G 8 ans+ 1 ans+ 16 ans+ 18 ans+
Franais canadien
Block
Dpl.
Intro.
Retour
Franais - 46
Utilisation de la fonction V-Chip pour les canaux numriques Il est possible dutiliser de linformation sur le contrle parental tout en regardant des canaux numriques. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ou pour slectionner Configuration, puis appuyez sur le bouton ENTER . 2. Appuyez sur les bouton ou pour slectionner V-Chip, puis appuyez sur le bouton ENTER . Le message Entrez NIP s'affiche. Saisissez votre code NIP 4 chiffres.
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro. : Franais
Configuration
Retour
TV
Entrez NIP * * *
V-Chip
.. Entrez NIP
Retour
. Lcran V-Chip apparat. Appuyez sur les bouton ou pour slectionner Catg. amricaine tlchargeable, puis appuyez sur le bouton ENTER . Si linformation nest pas tlcharge partir de la station de radiodiffusion, le menu Catg. amricaine tlchargeable est dsactiv. Linformation sur le contrle parental est tlcharge automatiquement lorsquon regarde des canaux numriques.Cela peut ncessiter plusieurs secondes. Le menu Catg. amricaine tlchargeable est disponible pour utilisation aprs tlchargement de linformation partir de la station de radiodiffusion. Toutefois, selon linformation provenant de la station, il est possible qu'on ne puisse pas l'utiliser. 4. Appuyez sur la touche ou pour entrer une restriction approprie. Appuyez sur la touche ENTER pour activer la restriction slectionne. Le saffiche. Appuyez sur le bouton ExIT pour quitter. Perm. tout: Appuyez sur cette touche pour dverrouiller toutes les catgories. Bloq. tout: Appuyez sur cette touche pour verrouiller toutes les catgories. Les niveaux de contrle parental diffrent selon la station de radiodiffusion. Le nom du menu par dfaut, Catg. amricaine tlchargeable, change en donnes tlcharges. Mme si vous rglez laffichage lcran dans la langue souhaite, le menu Catg. amricaine tlchargeable saffiche en anglais seulement. La classification bloque automatiquement certaines catgories plus restrictives. Les catgories (par exemple: violence, etc.) et les niveaux de classification (par exemple: DH, MH, H, etc.) peuvent diffrer selon la station de radiodiffusion.
TV
V-Chip
Blocage V-Chip Contrle parental TV Classif. MPAA Anglais Canadien : On Retour
Intro.
TV
Dpl.
Intro.
Retour
Rinitialisation du tlviseur lorsque la fonction V-Chip bloque un canal (solution durgence). Si un canal accs restreint est syntonis, la fonction V-Chip la bloque. La chane est bloque Lcran devient vide et le message suivant saffiche : TV-PG [ S ] 1. Entrer le NIP. Pour rtablir limage, syntoniser une autre chane laide des touches CH< Entrer NIP sur les touches num. ou CH>. Dans certains cas (selon la classification des programmes de tlvipour dbloquer toutes les chanes. Presser EXIT pour effacer le NIP sion locaux), la fonction Puce V permet de bloquer tous les canaux. Dans ce MENU pour afficher menu principal. cas, utiliser la touche V-Chip en guise de solution durgence. 2. Appuyer sur la touche MENU. Appuyer sur la touche ou pour slectionner Configuration, suivie de la touche ENTER . . Appuyer sur la touche ou pour slectionner V-Chip, suivie de la touche ENTER . 4. Entrer le NIP et appuyer sur la touche ENTER , suivie la touche ou pour dsactiver temporairement la fonction Blocage V-Chip. Si le NIP est oubli, appuyer sur les touches de la tlcommande dans lordre suivant pour rtablir le code 0-0-0-0 : Power Off (hors tension). MUTE 8 2 4 Power On (sous tension).
Franais - 47
La chane est bloque TV-PG [ L ] Entrer NIP sur les touches num. pour dbloquer toutes les chanes. Presser EXIT pour effacer le NIP MENU pour afficher menu principal.
Configuration
Retour
2.
.
Appuyez sur les boutons ENTER pour slectionner Sous-titres. Appuyez sur les bouton ou pour slectionner On, puis appuyez sur le bouton ENTER.
TV
Sous-titres
Sous-titres
: Off Mode ss-titres cods : Par dfaut Options de sous-titre
Intro.
Retour
TV
Sous-titres
Sous-titres : Off Off On Mode ss-titres cods : Par dfaut Options de sous-titres
Dpl.
Intro.
Retour
TV
Sous-titres
Sous-titres : On Mode ss-titres cods : Par dfaut Options de sous-titres
4.
Appuyez sur les bouton ou pour slectionner Mode ss-titres cods, puis appuyez sur le bouton ENTER . Utilisez les bouton ou pour slection ner le sous-menu de votre choix (Par dfaut, CC1 CC4 ou Texte1 Texte4), puis appuyez sur ENTER . Appuyez sur le bouton ExIT pour quitter.
La valeur par dfaut est CC1. CC1: Sous-titres principaux synchroniss. Il s'agit des sous-titres fournis dans la langue principale, qui doivent tre synchroniss avec le son et de prfrence avec une image spcifique. CC2: Sous-titres spciaux non synchroniss. Ce canal contient les donnes destines augmenter les fournies par le programme. CC: Sous-titres secondaires synchroniss. Donnes de sous-titres alternatives associes au programme. Il s'agit gnralement de la langue secondaire. CC4: Sous-titres spciaux non synchroniss. Similaire CC2. Texte1: Premier service de texte. Il peut s'agir de donnes varies non lies aux programmes. Texte2: Deuxime service de texte. Donnes supplmentaires, gnralement non lies aux programmes. Texte/Texte4: Troisime et quatrime services de texte. Ces chanes de donnes ne doivent tre utilises que si Texte 1 et Texte 2 ne suffisent pas.
Dpl.
Intro.
Retour
TV
Sous-titres
Sous-titres
: On dfaut Par CC1 Mode ss-titres cods : Par dfaut CC2 Caption Option CC CC4 Text1 Text2 Text Text4 Dpl. Intro. Retour
L'options Sous-titres ne fonctionne pas aux modes Composante, PC, ou HDMI. L'option de Sous-titrage dpend du programme diffus. Appuyer sur la touche CC de la tlcommande pour rgler la fonction des sous-titres On ou Off.
Franais - 48
TV
Sous-titres
Sous-titres
: Off Off On Mode ss-titres cods : Par dfaut Options de sous-titres
2. .
Dpl.
Intro.
Retour
4.
Sous-titres
: On Mode ss-titres cods : Par dfaut Options de sous-titre
Dpl.
Intro.
Retour
TV
Sous-titres
Sous-titres : On dfaut Par Service1 Mode ss-titres cods : Par dfaut Options de sous-titres Service2 Service Service4 Service Service6 CC1 Dpl. Intro. Retour
.
Appuyez sur les bouton ou pour slectionner Options de sous-titres, puis appuyez sur le bouton ENTER . La fonction Options de sous-titres nest disponible que lorsque les paramtres Service1~Service6 peuvent tre slectionns en Mode ss-titres cods. Les paramtres service1 6 en mode Sous-titres numriques ne sont pas tou jours disponibles, suivant le systme de diffusion utilis.
TV
Sous-titres
Sous-titres : On Mode ss-titres cods : Service1 Options de sous-titres
6.
Appuyez sur les bouton ou pour slectionner Format, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ou pour slection ner l'option de sous-titres souhaite, puis appuyez sur le bouton de ENTER . Appuyez sur les bouton ou pour slectionnez les options de sous-menu souhaites (voir options ci-dessous), puis appuyez sur ENTER . Appuyez sur le bouton ExIT pour quitter. La disponibilit des sous-titres dpend du programme diffus. La valeur Par dfaut correspond la configuration standard choisie par le fournisseur. Le premier plan et larrire plan ne peuvent pas tre configurs avec la mme couleur. Les opacits de premier plan et darrire-plan ne peuvent pas tre toutes deux transparentes.
Format: Cette option peut prendre les valeurs suivantes: Par dfaut, Petit, Standard et Grand. La valeur par dfaut est Standard. Style des polices: Cette option peut prendre les valeurs suivantes: Par dfaut, Style0 Style7. Vous pouvez modifier la police. La valeur par dfaut est Style0. Couleur avant-plan: Cette option peut prendre les valeurs suivantes: Par dfaut, Blanc, Noir, Rouge, Vert, Bleu, Jaune, Magenta et Cyan. Vous pouvez modifier la couleur des caractres. La valeur par dfaut est Blanc. Couleur arrire-plan: Cette option peut prendre les valeurs suivantes: Par dfaut, Blanc, Noir, Rouge, Vert, Bleu, Jaune, Magenta et Cyan. Vous pouvez modifier la couleur des sous-titres. La valeur par dfaut est Noir. Opacit avant-plan: Cette option peut prendre les valeurs suivantes: Par dfaut, Transparent, Translucide, Opacifi et Luminescence. Vous pouvez modifier l'opacit des caractres. Opacit arrire-plan: Cette option peut prendre les valeurs suivantes: Par dfaut, Transparent, Translucide, Opacifi et Luminescence. Vous pouvez modifier l'opacit d'arrire-plan des sous-titres. Retour par dfaut: Cette option permet de restaurer la valeur par dfaut des paramtres suivants: Format, Style des polices, Couleur avantplan, Couleur arrire-plan, Opacit avant-plan et Opacit arrireplan.
Franais - 4
TV
Dpl.
Intro.
Retour
Options de sous-titres Format : Par dfaut Style des polices : Par dfaut Couleur avant-plan : Par dfaut Couleur arrire-plan : Par dfaut Opacit avant-plan : Par dfaut Opacit arrire-plan : Par dfaut Retour par dfaut Dpl. Intro.
Retour
Appuyer sur la touche CC de la tlcommande pour rgler la fonction des sous-titres On ou Off.
TV
Prt lemploi Langue Heure V-Chip Sous-titres Mlodie
Configuration
: Franais : Moyen Retour
2. . 4.
Rglages externes
Prt lemploi : Franais
Configuration
: Franais Retour
Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro.
Configuration
Prt lemploi Langue : Franais heure V-Chip Sous-titres Off Mlodie : Moyen Basse Moyen conomiseur nergie : Off Mise niveau du logiciel haute Dpl. Intro. Retour
Off : Dsactive la fonction conomiseur dnergie. Basse : Rgle le tlviseur au mode dconomie dnergie bas. Moyen : Rgle le tlviseur au mode dconomie dnergie moyen. haute : Rgle le tlviseur au mode dconomie dnergie lev.
Franais - 0
USB Drive
2.
Appuyez sur la touche MENU Appuyez sur la touche ou pour choisir Configuration, puis sur ENTER
TV
Prt lemploi Langue
Configuration
: Franais Retour
.
Appuyez sur les bouton ou pour slectionner Mise niveau du logiciel, puis appuyez sur le bouton ENTER .
Heure V-Chip Sous-titres Mlodie : Moyen conomiseur nergie : Off Mise niveau du logiciel Dpl. Intro.
4. Appuyez sur le bouton ENTER . Laffichage du message Recherche de la cl USB...Cela peut prendre jusqu 30 secondes.. . Laffichage du message Remplacer la version xxxx par la version xxxx? Lappareil se rinitialise aprs la mise jour.. Appuyez sur les bouton ou pour slectionner Oui, puis appuyez sur le bouton ENTER . Veillez ne pas interrompre lalimentation ou retirer le lecteur USB pendant que la procdure de mise niveau est en cours. Le tlviseur se dsactivera et ractivera automatiquement une fois la mise niveau termine. Veuillez vrifier la version du logiciel une fois que la mise niveau est termine. Au moment de la mise niveau du logiciel, les rglages vido et audio effectus seront remplacs par les rglages par dfaut (dfinis en usine). Nous vous recommandons de noter vos rglages afin de pouvoir les rtablir facilement aprs la mise niveau.
Mise niveau du logiciel Recherche de la cl USB Cela peut prendre jusqu 0 secondes.
Mise niveau du logiciel Remplacer la version xxxx par la version xxxx? appareil rinitialise aprs la mise jour.
Oui
Non
Franais - 1
Il ny a pas de son ou le son est trop bas alors que le volume est rgl au maximum. Limage roule verticalement. La tlvision fonctionne irrgulirement. Le tlviseur ne s'allume pas. Dysfonctionnement de la tlcommande. Message Vrifier signal cble.. Message Mode non disponible. Problme d'cran en diffusion numrique. Limage est trop claire ou trop sombre. Barres noires lcran.
Limage a une teinte rouge/verte ou rose. Le mode Sous-titres ne fonctionne pas. Image embrouille Images fantmes
Franais - 2
Problme Des barres horizontales et clignotent, scintillent ou tremblent sur limage. Des barres verticales et clignotent, scintillent ou tremblent sur limage. Lcran est noir et lIndicateur dalimentation clignote. Il est possible que limage ne soit pas stable et quelle donne limpression de vibrer lorsquun ordinateur est connect lentre PC.
Solution possible Ajustez la fonction de rglage de base, puis rglez la fonction de rglage fin. Ajustez la fonction de rglage de base, puis rglez la fonction de rglage fin. A partir de votre ordinateur, vrifiez: lalimentation, le cble signal. La tlvision est en mode gestion dnergie. Dplacez la souris de lordinateur ou appuyez sur nimporte quelle touche du clavier. Si le rglage est incorrect, utilisez le programme utilitaire de votre ordinateur pour modifier les paramtres daffichage. Votre tlvision prend en charge les fonctions daffichage multiscan dans le domaine de frquence suivant: Frquence horizontale (kHz) Frquence verticale (Hz) Taux de rafrachissement maxi (60 Hz) 30~60 60~75 1360 X 768
Limage nest pas centre sur lcran. Limage semble dforme dans un angle de lcran. Le message rtablit tous les paramtres aux rglages prdfinis saffiche.
Rglez la position horizontale et verticale. Ne rglez pas la position de lcran en Signal Numrique. Si la fonction "Numr. seul." est slectionne avec certains appareils externes, limage peut sembler dforme dans un angle de lcran. Ce dommage est caus par les appareils externes et non par le tlviseur. Ce message saffiche lorsquon maintient la touche ExIT enfonce pendant quelques instants. Les paramtres sont rtablis aux rglages prdfinis en usine.
Lcran TFT LCD utilise un affichage constitu de pixels secondaires (3 133 440) ncessitant une technologie sophistique. Cependant, il se peut quil y ait lcran quelques pixels lumineux ou noirs. Ces pixels nont aucun impact sur les performances de ce produit.
Franais -
Installation du support
1. Connecter le tlviseur et le support. Deux personnes ou plus devraient porter le tlviseur. Sassurer de bien distinguer le devant et larrire du support lors de lassemblage. Pour tre sr que le tlviseur est install sur le support au niveau appropri, ne pas exercer de pression excessive sur les cts suprieurs droit et gauche du tlviseur. 2. Resserrer les deux vis la position 1 puis resserrer les deux (2) vis la position 2. Placer lappareil la verticale puis resserrer les vis. Si lon resserre les vis lorsque le tlviseur est en position horizontale, il pourrait pencher vers un ct.
Dmonter la base
1. Retirez les 4 vis larrire de la tlvision. 2. Sparer le support et le tlviseur. Deux personnes ou plus devraient porter le tlviseur. . Placer le couvercle sur lorifice infrieur.
Franais - 4
Pour entrer dans le menu 1. Appuyez sur la touche , , ou de la tlcommande. Lcran de rglage du support mural saffiche. Si lcran de rglage du support mural ne saffiche lorsquon clique sur une touche de direction pendant que le tlviseur est en marche, utilisez le menu pour lafficher. Appuyez sur la touche ou pour choisir Rglages externes, puis sur ENTER . Appuyez sur la touche ou pour choisir Rglage du support mural, puis sur ENTER . Mmorisation de la position 2. Rglez la position souhaite laide des touches ,,,. Si vous appuyez sur une touche flche lorsquil ny a pas daffichage lcran du tlviseur, lcran de rglage saffiche alors. Appuyez sur la touche INFO pour rinitialiser. Appuyez sur la touche ou pour slectionner Oui, puis sur ENTER . La position est initialise au rglage par dfaut. . Appuyez sur la touche bleue. Appuyez sur les touches et pour slectionner un mode de sauvegarde partir des positions 1, 2 ou 3 afin de sauvegarder la position en cours. Pour ne pas sauvegarder la position en cours, appuyez sur la touche RETURN. Vous ne pouvez pas utiliser les touches de couleur pendant que vous slectionnez un mode de sauvegarde. 4. Appuyez sur ENTER pour sauvegarder. Lorsque la position 1 est slectionne, le message Position en cours sauvegarde comme Position 1. saffiche. . Appuyez sur la touche ENTER .
Rglage
TV
Mlodie
Rglages externes
: Moyen Rglage du support mural
Dpl.
Intro.
Retour
Position Rglage
1 Enregistrer
2
INFO
Centre
La position sauvegarde saffiche gauche de lcran. Rglage la position mmorise 1. Effectuez ltape 1 de la fonction Pour entrer dans le menu. 2. En appuyant sur une touche de couleur (rouge, verte, jaune), le support mural rglage automatique se rgle sur la position mmorise. Vous pouvez rgler le support mural sur une des trois positions prrgles en appuyant sur les touches rouge (Position 1), verte (Position 2) ou jaune (Position 3). Si vous rglez la position aprs avoir activ une position prrgle, laffichage disparat.
Position Rglage
1 Enregistrer
2
INFO
Centre
Pour linstallation, reportez-vous au guide dinstallation fourni avec le support mural. Pour installer le tlviseur ainsi que pour installer et dplacer le support mural, adressez-vous une socit spcialise en installation. Ce dispositif doit tre utilis pour poser le support mural sur un mur. Pour le fixer dautres matriaux, veuillez communiquer avec votre dtaillant. Le support mural automatique ne fonctionne pas lorsque la fonction Anynet+ est active. Les modles LN37A330J1D et LN40A330J1D ne sont pas compatibles avec lancien modle de support mural (WMN5090A).
Franais -
Type de produit
pouces 23~ 26 32 ~ 40 46 ~ 52
Spc. VESA (A * B) 200 * 100 200 * 200 600 * 400 700 * 400 (Pas de spcifications VESA) 800 * 400 1400 * 800 600 * 400 800 * 400 Pas de spcifications VESA 1400 * 800
Vis standard M4 M6
Quantit
LCD-TV
57 57 ~ 70 80 ~ 42 ~ 50
4 M8
PDP-TV
55 ~ 70 63 80 ~
4 M8 6 4
Les dimensions standard pour les ensembles de fixation murale figurent dans le tableau ci-dessus. Un manuel dinstallation dtaille et toutes les pices ncessaires lassemblage sont comprises avec lachat de notre jeu dinstallation murale. Ne pas utiliser de vis plus longues que les dimensions standard : elles pourraient endommager lintrieur du tlviseur. En ce qui a trait aux supports muraux qui ne sont pas conformes aux spcifications de vis standard VESA, la longueur des vis peut diffrer selon leurs spcifications. Nutilisez pas de vis non conformes aux spcifications de vis standard VESA. Ne serrez pas trop les vis, cela pourrait endommager le produit ou en provoquer la chute et causer des blessures. Samsung dcline toute responsabilit dans le cas o de tels accidents se produisent. Samsung ne saurait tre tenu responsable des dommages au produit ou des blessures occasionns par l'utilisation dun support mural autre que VESA ou non recommand, ou si le consommateur ne suit pas les instructions dinstallation du produit. Nos modles de 145 cm (57 po) et 160 cm (63 po) ne sont pas conformes aux spcifications VESA. Par consquent, vous devez utiliser notre ensemble de fixation conu pour ces modles. Lors du montage, linclinaison du tlviseur ne doit pas dpasser 15. N'installez pas votre kit de montage mural lorsque votre tlviseur est en fonctionnement. Une blessure par choc lectrique pourrait en rsulter.
Franais - 6
<Optionnel>
Lemplacement du verrou Kensington peut varier en fonction du modle. 1. Insrez le dispositif de verrouillage dans la fente Kensington de la tlvision LCD (Figure 1) et tournez-le dans le sens de verrouillage (Figure 2). 2. Branchez le cble du verrouillage Kensington. . Fixez le verrouillage Kensington sur un bureau ou tout autre objet lourd inamovible.
Franais - 7
Spcifications
Modle Taille de lcran (diagonale) Rsolution PC Son Sortie Dimensions (WxDxh) TV Avec support Poids Avec support Sans support Considrations environnementales Temprature de fonctionnement Humidit au cours du fonctionnement Temprature de stockage Humidit du stockage Socle orientable (Gauche/Droite) LN26A40C1D 26 pouces 1360 x 768 @ 60 Hz 5W x 2 743.8 X 79.8 X 447.4 mm (29.3 X 3.1 X 17.6 pouces) 743.8 X 232 X 506.5mm (29.3 X 9.1 X 19.9 pouces) 10.5 kg (23.1 lbs) LN2A40C1D 32 pouces 1360 x 768 @ 60 Hz 10W x 2 874 X 81 X 531 mm (34.4 X 3.2 X 20.9 pouces) 874 X 291 X 577 mm (34.4 X 11.5 X 22.7 pouces) 15 kg (33.1 lbs)
50F 104F (10C 40C) 10% 80%, sans condensation -4F 113F (-20C 45C) 5% 95%, sans condensation -0 ~ 0
50F 104F (10C 40C) 10% 80%, sans condensation -4F 113F (-20C 45C) 5% 95%, sans condensation -20 ~ 20
Modle Taille de lcran (diagonale) Rsolution PC Son Sortie Dimensions (WxDxh) TV Avec support Poids Avec support Sans support Considrations environnementales Temprature de fonctionnement Humidit au cours du fonctionnement Temprature de stockage Humidit du stockage Socle orientable (Gauche/Droite)
LN7A40C1D 37 pouces 1360 x 768 @ 60 Hz 10W x 2 1013 X 93 X 602.3 mm (39.9 X 3.7 X 23.7 pouces) 1013 X 300 X 652 mm (39.9 X 11.8 25.7 pouces) 20.5 kg (45.2 lbs)
LN40A40C1D 40 pouces 1360 x 768 @ 60 Hz 10W x 2 1084 X 95 X 639 mm (42.7 X 3.7 X 25.2 pouces) 1084 X 300 X 690 mm (42.7 X 11.8 X 27.2 pouces) 21.5 kg (47.4 lbs)
50F 104F (10C 40C) 10% 80%, sans condensation -4F 113F (-20C 45C) 5% 95%, sans condensation -20 ~ 20
50F 104F (10C 40C) 10% 80%, sans condensation -4F 113F (-20C 45C) 5% 95%, sans condensation -20 ~ 20
Le design et les spcifications peuvent changer sans pravis. Ce priphrique est un appareil numrique de classe B. Pour les caractristiques d'alimentation et de consommation lectrique, voir l'tiquette fixe au produit.
Franais - 8
Dimensions
LN26A0J1D
VUE DU HAUT
29.3
22.8
12.8
17.6 19.9
19.1
9.1
VUE ARRIERE
REMARQUE : Les dessins ne sont pas ncessairement tous lchelle. Certaines dimensions sont susceptibles de changer sans pravis. Consultez les dimensions avant dinstaller votre tlviseur. Aucune responsabilit ne saurait tre accepte en cas derreur typographique ou dimpression. 2008 Samsung Electronics America, Inc. Franais -
Dimensions
LN2A0J1D
VUE DU HAUT
34.4
3.2
27.5
15.5
20.9 22.7
21.5
11.5
VUE ARRIERE
REMARQUE : Les dessins ne sont pas ncessairement tous lchelle. Certaines dimensions sont susceptibles de changer sans pravis. Consultez les dimensions avant dinstaller votre tlviseur. Aucune responsabilit ne saurait tre accepte en cas derreur typographique ou dimpression. 2008 Samsung Electronics America, Inc. Franais - 60
Dimensions
LN7A0J1D
VUE DU HAUT
3.7 39.9
32.4
18.3
23.7 25.7
23.3
11.8
VUE ARRIERE
REMARQUE : Les dessins ne sont pas ncessairement tous lchelle. Certaines dimensions sont susceptibles de changer sans pravis. Consultez les dimensions avant dinstaller votre tlviseur. Aucune responsabilit ne saurait tre accepte en cas derreur typographique ou dimpression. 2008 Samsung Electronics America, Inc. Franais - 61
Dimensions
LN40A0J1D
VUE DU HAUT
34.9
19.7
25.2 27.2
23.3
11.8
VUE ARRIERE
REMARQUE : Les dessins ne sont pas ncessairement tous lchelle. Certaines dimensions sont susceptibles de changer sans pravis. Consultez les dimensions avant dinstaller votre tlviseur. Aucune responsabilit ne saurait tre accepte en cas derreur typographique ou dimpression. 2008 Samsung Electronics America, Inc. Franais - 62