Professional Documents
Culture Documents
Grade 8 Science LAS Q1
Grade 8 Science LAS Q1
SCIENCE
FIRST QUARTER
COPYRIGHT PAGE
Learning Activity Sheet in SCIENCE
(Grade 8)
Copyright © 2020
DEPARTMENT OF EDUCATION
Regional Office No. 02 (Cagayan Valley)
Regional Government Center, Carig Sur, Tuguegarao City, 3500
“No copy of this material shall subsist in any work of the Government of the Philippines. However,
prior approval of the government agency or office wherein the work is created shall be necessary
for exploitation of such work for profit.”
This material has been developed for the implementation of K to 12 Curriculum through the
Curriculum and Learning Management Division (CLMD). It can be reproduced for educational
purposes and the source must be acknowledged. Derivatives of the work including creating an
edited version, an enhancement of supplementary work are permitted provided all original works
are acknowledged and the copyright is attributed. No work may be derived from this material for
commercial purposes and profit.
Consultants: Printed by: DepEd Regional Office No. 02
Regional Director : ESTELA L. CARIÑO, EdD., CESO
Address: RegionalRegional
IV Assistant Government Center, Carig: Sur,
Director RHODATuguegarao City,
T. RAZON, 3500
EdD., CESO V
Telephone Nos.: (078) 304-3855;
Schools Division Superintendent (078) 396-9728
: REYNANTE Z. CALIGUIRAN, PhD
EmailAsst.
Address:
SchoolsWebsite:
Division Superintendent : JESUS B. MAGGAY
Chief Education Supervisor, CLMD : OCTAVIO V. CABASAG,
PhD Chief Education Supervisor, CID : ESTELA S. CABARO, PhD
Development Team
Writers : ERIC B. PASION, MARIA LORESA J. TUMANGUIL, RIZZA C. BALORAN, SHEELA A.
APOSTOL, EDGAR A. SADDUL, GEMMA U. PACAMALAN, REOWIN PALATTAO, VENIE DE
LEON, KAREN GACUTAN, MAPHILINDO TURARAY, EDUARDO C. DELA ROSA, DIANA D.
LACAMBRA, VICTORIA T. IRINGAN, Cagayan Nat’l HS, Tuguegarao City Science HS
Content Editor: EDUARDO C. DELA ROSA, Cagayan National High School
ULYSSES DAQUIAOG, Ugad National HS, SDO
Isabela Language Editor : MYRNA Q. ADDURU, VISITACION
LIGUTAN
Illustrators : KATHERINE D. MELAD, TRISHA ELIZABETH J. TUMANGUIL, EMERLITA
N. MORALES, VENIE DE LEON
Layout Artists : ERIC B. PASION, Cagayan National High School
Focal Persons : MYRNA Q. ADDURU, PhD, EPS Science SDO Tuguegarao City
JESSICA T. CASTANEDA, PhD, EPS LRMS, SDO Tuguegarao
City ESTER T. GRAMAJE, EPS Science-CLMD, DepEd RO2
i
Table of Contents
Page
Competency
number
Investigate the relationship between the
amount of force applied and the mass of the
object to the amount of change in the object’s
motion ..................... 1
Infer that when a body exerts a force on
another, an equal amount of force is exerted
back on it ..................... 20
Identify and explain the factors that affect
potential and kinetic energy
..................... 33
Investigates the effect of temperature to the
speed of sound
..................... 45
Explain the hierarchy of colors in relation to the
energy of visible light
..................... 57
Differentiate between heat and temperature
at the molecular level
..................... 68
Infer the relationship between current and
voltage
..................... 78
Explain the advantages and disadvantages of
series and parallel connections in homes
..................... 100
Explain the functions of circuit breakers, fuses,
earthing, double insulation, and other safety
devices in the home
..................... 112
i
SCIENCE 8
Name of Learner: Grade Level:
Section: Date:
1
Learning Competency with Code:
Investigate the relationship between the amount of force applied and the mass of the object to
the amount of change in the object’s motion. (Quarter 1, Week 1, S8FE-Ia-15)
Activity 1. Loop-a-Word
Directions: There are 15 words related to motion which are hidden in the box below. Locate
and encircle them.
M E R N N I W J F W G N E W T O N Q U E
A I F O R C E K H E M S C K H V D W A R
G R O S D G I C U I N T E A C T I O N J
N A P K F S G M T G U A M L Z X C E G B
I F U J N U T Y N H V S Y Q F K M S V T
T M L R D X H Q I T W J N M U L A L O E
U C L S I Z U K I X K V A I Z J S D X N
D G P Y W O G H V T E Q W W A Y S H N S
E F B N O R M A L G G U R T S D G P Q I
H V K V G C C R B B W F K M B I M T W O
I E M G E K U I L I B R O U M R N X V N
R C R S W K F S X U V P L X V E N P O I
Q T I N E R T I A N G S L M W C P A J F
B O P M J Y R L E H K J E N I T L H H R
M R E H L A I Z T A L H O L J I Y H E I
T Q F X T P D G R K Q S B X L O G M D C
Y W A C C E L E R A T I O N P N E D F T
R N M J Z Q D S N Z J F R S C B F I A I
L I N E O F A C T I O N D W O C Z U Z O
T C U W H V D Y J X Q I B P U S H S J N
2
Activity 2. What can Force Do?
Directions: Have you experienced playing football or have you ever watched a football
game? Study the picture below and answer the questions that follow.
1. In a football game, what is exerted on the ball as the player kicks it?
2. If the football is initially at rest, what happens to its speed as the player kicks it?
3. While the football is rolling on the ground, does the surface of the ground offer an
opposite force on the ball?
4. What is this force exerted by the ground surface on the ball?
6. How about when another player blocks a flying football. Does the player exert a force
on the ball?
7. What is the effect of this blocking force to the football’s speed?
3
Activity 4. Balanced Force
Normally, there are more than one forces acting on an object. When two or more
forces act on an object, they add up algebraically to get the combined effect of the forces
called Resultant Force or Net Force.
Directions: A free-body diagram (FBD) illustrates the forces acting on an object to
determine the resultant force. Interpret the free-body diagrams below and answer the
questions that follow.
A. Tension
A pendulum is suspended at a certain height. The string exerts tension on the bob with
a force of 0.01 N. The weight of the bob is also 0.01 N.
String
Tension = 0.01 N
Pendulum bob
Weight = 0.01 N
1. What are the two forces acting on the bob?
2. What is the direction of each force?
3. Using the Cartesian coordinate plane (x-y coordinate plane) what is the sign of an
upward force?
4. Using the Cartesian coordinate plane (x-y coordinate plane) what is the sign of a
downward force?
5. With positive and negative signs affixed with the upward and downward forces,
respectively, add the two forces together. F net = F1 + F2
6. If the Fnet on the pendulum is equal to zero, will the bob swing sideways?
7. If the Fnet on the pendulum is equal to zero, will the bob move upward?
8. If the Fnet on the pendulum is equal to zero, will the bob move downward?
9. Are the two forces acting on the pendulum balanced?
10. What is the Fnet when forces are balanced?
4
B. Normal
A box weighing 20 N is placed on top of a table. The table supports the weight of the
box with an upward normal force of 20 N.
Box Normal = 20 N
Table
Weight = 20 N
1. What are the two forces acting on the box?
2. What is the direction of each force?
3. Which force takes a positive sign?
4. Which force takes a negative sign?
5. With positive and negative signs affixed with the upward and downward forces,
respectively, add the two forces together. F net = F1 + F2
C. Friction
A load is pushed to the right along a horizontal floor with a force of 50 N. Static
friction acts towards the opposite direction with a frictional force of 50 N.
Load
Static Friction = 50 N F1= 50 N
Floor
1.
What is the net force or resultant force, Fnet?
2.
Are the two forces acting on the load balanced?
3.
Will the box move because of balanced forces?
Balanced forces on objects that are initially at rest illustrate the first fragment of
Newton’s First Law of Motion or the Law of Inertia. Complete the statement of the Law of
Inertia for objects that are initially at rest. Write the correct group of words on the blank..
When forces are balanced, objects at rest will .
5
Activity5. Unbalanced Force
Directions: Read and analyze the given situations and the free-body diagrams below.
Answer the questions that follow.
A. A load initially at rest is pushed to the right along a horizontal floor with a force of
50 N. Starting friction acts towards the opposite direction with a frictional force of 20 N.
Load
Starting Friction = 20 N F1= 50 N
Floor
1. What is the magnitude of the resultant force or Fnet?
2. What is the direction of the net force?
3. Are the forces balanced?
4. Will the load move?
5. In what direction will the load move?
B. A boy pushes a toy car at the back with a force of 2 N, to the right. Another boy
applies a force of 3 N to the right by pulling a string attached in front of the toy. The sliding
friction is 2 N to the left.
Toy car F1 = 2 N
Friction = 2N F2 = 3 N
Floor
1. What is the magnitude of the resultant or net force?
2. What is the direction of the resultant force?
3. Will the toy car move? In what direction will it go?
6
C. A ball rolling along a horizontal floor in a straight line path with a constant
velocity of 2 m/s is kicked with a force of 5 N to the right. Rolling friction between the
surfaces of the ball and the ground is 2.5 N
Ball
F1 = 5 N
Floor
Friction = 2N
1. What is the magnitude of the net, resultant force?
2. What is the direction of the net, resultant force?
3. What is the velocity of the ball before it was kicked?
4. What is constant velocity? Does it speed up, slow down, or remain the same?
5. What is expected to happen to the speed of the ball after the kick?
Complete the statement of Newton’s First Law of Motion or the Law of Inertia.
7
Activity 6. Effect of Force to Acceleration
Directions: Investigate how different amounts of force affect the object’s acceleration
differently by examining the given situations below. Answer the questions that follow.
A. Two wooden carts below having the same mass of 2 kilograms are lying on a
frictionless horizontal floor. The first cart is pushed with a force of 2 N to the right,
while the second cart is pushed with a force of 4 N to the right.
Cart 1
Fnet = 2 N
Frictionless Floor
Cart 2
Fnet = 4 N
Frictionless Floor
B. Another cart is now placed on the same floor. Cart 3 has the same mass of 2
kilograms with Cart 1 and Cart 2. A force of 8 N to the right is exerted to it.
Compare the effect of this force with the first two carts. Answer the questions that
follow.
Cart 3
Fnet = 8 N
Frictionless Floor
8
At this point you should be able to state the effect of net force to the acceleration of
an object. This is the first fragment of the statement of Newton’s Second Law of Motion or
the Law of Acceleration!
Encircle the correct term enclosed in the parenthesis to complete each statement in the
box below.
Acceleration is (directly, inversely) proportional to net force. This means that increasing the net external force
9
Activity 7. Effect of Mass to Acceleration
Directions: Investigate the effect of mass to an object’s acceleration by examining the given
situations below. Answer the questions that follow.
A. Two wooden carts lying on a frictionless horizontal floor are pushed with equal
amount of force of 10 N to the right. The first cart has a mass of 5 kg, while the
second cart has a mass of 10 kg.
Cart 1 mass = 5 kg
Fnet = 10 N
Frictionless Floor
Cart 2 mass = 10 kg
Fnet = 10 N
Frictionless Floor
1. Which of the two carts will gain greater acceleration?
2. How many times the acceleration of one cart as compared to the other cart be?
1
B. Another cart is placed on the same floor as shown below. The same amount of force
as Cart 1 and Cart 2 is applied to Cart 3. The mass of Cart 3 is 20 kilograms.
Compare the effect of this mass to acceleration with the other carts. Answer the
questions that follow.
Cart 3
mass = 20 kg
Fnet = 10 N
Frictionless Floor
At this point you should be able to state the effect of mass to the acceleration of an
object. This is the second fragment of the statement of Newton’s Second Law of Motion or
the Law of Acceleration!
Encircle the correct term enclosed in the parenthesis to complete each statement in the
box below.
Acceleration is (directly, inversely) proportional to mass. This means that increasing the mass of an objec
1
Activity 8. Applying Newton’s Second Law of Motion
Newton’s second law of motion or the Law of Acceleration can be summarized by
the equation:
Where: is the acceleration of the object in m/s2; is the net external force in newtons
(N) ; and, m is the mass of the object in kilograms (kg).
Directions: Apply this formula in solving the following problems. Show your complete
solution.
1. A 5 kg object is pushed along a frictionless floor with a force of 3 N. What is the
acceleration of the object?
4. A cart with a mass of 8 kilograms is pulled along a horizontal rough surface with a
force of 56 N. The floor offers a rolling friction of 16 N on the wheels of the cart.
What is the acceleration of the cart?
Cart mass = 8 kg
F1 = 56 N Rough Surface
Rolling Friction = 16 N
1
Activity 9. Summing it Up!
Directions: With activities 1 to 8, you were able to investigate the relationship between the
amount of force applied and the mass of the object to the amount of change in the object’s
motion. In other words you described the motion of an object in terms of the factors causing
such change in motion.
To help you generalize your lesson, answer briefly the questions that follow.
1. In terms of motion, what can net external force do to an object?
Reflection:
1. I learned that
2. I enjoyed most on
1
References:
Campo, Pia C., et. al. 2003..Science – Grade 8. Learner’s Module. Pasig City. Department of
Education. -
Cordero-Navaza, Delia & Bienvenido J. Valdes. 1996. You and the Natural World Series:
Physics. Quezon City, Philippines. Phoenix Publishing House Inc.,
Padua, Alicia L., et.al. 2003. Practical and Explorational Physics, Modular Approach.
Quezon City, Philippines. Vibal Publishing House, Inc.,
Salmorin, Lolita M. & Alberto V. Florido Jr. 2009. Science and Technology IV-Physics.
Quezon City, Philippines. Abiva Publishing House Inc.,
Silverio, Angelina A. & Rosemarie S. Cabauatan. 2006. Exploring Life Through Science.
Physics. Teachers Guide. Quezon City, Philippines. Phoenix Publishing House, Inc.,
Young & Freedman. 2004. Sear’s and Zemansky’s University Physics with Modern
Physics.11th Edition. San Francisco, California, USA. Pearson Education Inc.,
1
Answer Key
Activity 1.
M E R N N I W J F W G N E W T O N Q U E
A I F O R C E K H E M S C K H V D W A R
G R O S D G I C U I N T E A C T I O N J
N A P K F S G M T G U A M L Z X C E G B
I F U J N U T Y N H V S Y Q F K M S V T
T M L R D X H Q I T W J N M U L A L O E
U C L S I Z U K I X K V A I Z J S D X N
D G P Y W O G H V T E Q W W A Y S H N S
E F B N O R M A L G G U R T S D G P Q I
H V K V G C C R B B W F K M B I M T W O
I E M G E K U I L I B R O U M R N X V N
R C R S W K F S X U V P L X V E N P O I
Q T I N E R T I A N G S L M W C P A J F
B O P M J Y R L E H K J E N I T L H H R
M R E H L A I Z T A L H O L J I Y H E I
T Q F X T P D G R K Q S B X L O G M D C
Y W A C C E L E R A T I O N P N E D F T
R N M J Z Q D S N Z J F R S C B F I A I
L I N E O F A C T I O N D W O C Z U Z O
T C U W H V D Y J X Q I B P U S H S J N
Activity 2.
1. Force
2. Speeds up or increases
3. Yes
4. Friction
5. It slows down the ball.
6. Yes
7. The ball may stop or bounce with a faster / slower speed (answers may vary)
8. The ball changes direction
1
Activity 3.
Force is any INTERACTION that causes change in an object’s motion. It is caused by either PUSHor PULL Fo
The SI unit of force is the NEWTON. It is denoted in symbol by capital letter N. It is defined as the amount of f
Activity 4.
A. Tension
1. Weight and Tension
2. Upward for tension, downward for weight
3. Positive
4. Negative
5. F net = F1 + F2= 0 Newton
6. No
7. No
8. No
9. Yes
10. Fnet= 0 N
B. Normal
1. Normal and Weight
2. Upward for normal, downward for weight
3. Normal
4. Weight
5. F net = F1 + F2= 0 N
6. No
7. Yes
8. Forces are balanced when their F net is zero. Two forces are balanced when they are
equal in magnitude but opposite in direction (* Teacher must emphasize that the
forces must act on the same object)
C. Friction
1.
Fnet = 0
2.
Yes
3.
No
1
Complete the statement below.
When forces are balanced, objects at rest will remain at rest.
Activity 5.
A.
1. Fnet = 30 N
2. To the right
3. No
4. Yes
5. To the right
B.
1. 3 N
2. To the right
3. Yes.To the right
C.
1. 3N
2. To the right
3. Constant 2 m/s
4. Velocity/ speed remains the same
5. The ball will gain speed
6. Unbalanced force or net force
Objects at rest will remain at rest. Objects in motion will continue to MOVE in a STRAIGHT line path with a
Activity 6.
A.
1. Net force causes both carts to move
2. Cart 2
3. Cart 2
4. Cart 2 will accelerate 2x greater than Cart 1
5. The acceleration of the cart also doubles.
1
B.
1. Force on cart 3 is 4x greater than that of cart 1?
2. 4x faster
3. 2x greater
4. 2x faster
5. Acceleration also increases
6. Direct relationship/ acceleration increases with force
Encircle the correct term enclosed in the parenthesis to complete each statement in the
tale below.
Acceleration is (directly, inversely) proportional to net force. This means that increasing the net external fo
Activity 7.
A.
1. Cart 1
2. Cart 1 will gain twice as great as the acceleration of Cart 2.
3. Mass
4. Acceleration is halved
B.
1. 4x greater
2. 4x slower
3. 2x greater
4. 2x slower
5. Acceleration decreases
Encircle the correct term enclosed in the parenthesis to complete each statement in the
box below.
Acceleration is (directly, inversely) proportional to mass. This means that increasing the mass an object wi
1
Activity 8.
1. 0.6 m/s2
2. 12 N
3. 5 kg
4. 5m/s2
Activity 9
1. A net force causes an object to move, stop, slow down, speed up, and/or change direction.
Net force causes acceleration.
2. Net external force directly affects the object’s acceleration. When Fnet is increased,
acceleration increases.
3. Mass inversely affects acceleration. When mass is increased, acceleration decreases.
Prepared by:
ERIC B.
PASION
Cagayan National High School
1
SCIENCE 8
Name of Learner: Grade Level:
Section: Date:
Paramed
ic
What is the moral of the story? If you encountered a situation similar to helping a
certain person,
Mike would youborn
Sibal was also extend
ten weeksyour service
early and without hesitation?
in need of a trustworthy doctor. His
parents found Jose Rapatan, MD, a pediatrician who stayed with the baby for two
Take note of what the comic strip is saying.
nights after he came down with a life-threateningly high fever. Thirty years later and
all grown up, Sibal, a paramedic, was called in to help at the site of a car wreck. The
car was on fire with a man still stuck inside. After firefighters helped put out the
Doand
flames youJaws
wantoftoLife
understand
opened the whycar,
thisSibal
is happening?
brought the injured man into an
ambulance. He learned
Scientifically, one’sthe rescued
action and victim’s
its reactionname was Jose Rapatan—the
is explained very same
by the force around us. A
Jose Rapatan who’d saved his life as a baby.
force is always part of a mutual action that involves another force.
Basically, force is a push or a pull. A mutual action is an interaction between one
thing and another.
2
Newton’s third law describes the relationship between two forces in an interaction
which has the following properties:
ACTION
REACTION
REACTI
2
DID YOU KNOW?
Understanding how a helicopter gets its lifting force
Competency (Code): Infer that when a body exerts a force on another, an equal amount of
force is exerted back on it (S8FE-Ia-16)
To identify a pair of action-reaction forces, first identify the interacting objects A and
B, and if the action is A on B, the reaction is B on A. There is a simple recipe for treating
action and reaction forces: First identify the interaction. Let’s say one object, A, interacts
with another object, B.
Second, the action and reaction forces are stated in the form: Action: Object A
exerts a force on object B. Reaction: Object B exerts a force on object A.
2
2. A man is propelled upward and then down into the
swimming pool as he jumps on the diving board.
He exerts a downward force on the diving board
and the diving board simultaneously exerts an
equal force on the man but in the upward
direction.
Walking is possible- as you walk, you exert a force against the floor (down and backward) and the flo
3.
4. A fireman has to hold on tightly to a fire hose. The hose will fly backwards as water shoots out from it.
2
Activity 2. The Direction of Your Reaction
Directions. Consider the following figure. Draw a counterpart arrow that illustrates the
direction of the reaction force.
1. 6.
3. 8.
2
Activity 3. Puzzled with Forces
Directions. Fill in the crossword puzzle with the words missing from the sentences below.
Match the number of the sentence to the boxes placed across or down the grid.
1 2
5 6
10
Across Down
3. Force acting on one direction 1. The force that pull things toward Earth
4. A man shoots a rifle and the force of the 2. A book exerts a force of 2N downwards,
shot results in recoil. The magnitude into a chair that exerts a force of 5N
of the force on the rifle downwards to the floor it stands on. What
the magnitude of force on the bullet. is the force that the floor exerts upwards on
9. The force that acts on an object to stop the chair?
its motion 5. For every action there is an equal
10. Reaction always go in the and opposite reaction
direction of the action 6. Force acting on the opposite direction
7. Forces always come in .
8. A push or a pull
2
Activity 4. Force of Choices
Directions: Choose the answer from the given questions. Encircle the letter of the correct
answer.
1. What could correctly complete the following statement? “A force interaction requires at
least a(n) ”
A. Action force.
B. Pair of force.
C. Reaction force.
D. Single force.
2. What wouldcorrectly fill the following statement? “Whenever one subject exerts a force
on a second object, the second object exerts a force on the first that is ”
A. in the same direction and equal in magnitude at the same time.
B. in the same direction and lesser in magnitude at the same time
C. opposite in direction and equal in magnitude at the same time.
D. opposite in direction and greater in magnitude at the same time
3. What object will provide a forward motion force to a motor scooter along a higway
which is a reaction from the vehicle’s tires?
A. Engine B. Fuel C. Road D. Steering Wheel
4. What is the direction of gravity against a person when he jumps from the ground?
A. Downward B. Upward C. To the left D. To the right
5. What will happen if a net force acts on a horse while pulling a wagon?
A. The horse-wagon system accelerates.
B. The horse-wagon system does not move.
C. The horse-wagon system is pulled backwards.
D. The horse will accelerate but the wagon will be steady.
6. At a pizza shop, the cook throws the pizza dough in the air. On what factor will the
amount of force that the cook exerts on the dough depend on?
A. Brand label of the dough C. Mass of the dough
B. Color of the dough D. Strength of the dough
7. While driving down the road, a firefly strikes the windshield of a bus and makes a quite
obvious mess in front of the face of the driver. The firefly hit the bus and the bus hits the
firefly. Which of the following statements is correct?
A. The force of the firefly on the windshield is zero.
B. The force of the firefly is lesser than the force of the bus.
C. The force of the firefly is greater than the force of the bus.
D. The force of the firefly and the bus have no difference in magnitude.
8. Which of the following situation best describes Newton’s Third Law of Motion?
A. A rifle recoils when fired.
B. Occurrence of high and low tides.
C. A follow through is needed when a golfer hits the ball with a golf club.
D. A chocolate vendor has to move with the bus as he jumps off the bus.
9. Trisha, who has a mass of 30 kg stands on platform. What is the magnitude of force
called Normal Force does the platform exert on Trisha?
A. 9.8 N C. 257.5 N
B. 30.00 N D. 294.00 N
2
10. Two 100-N weights are attached to a scale called spring balance as shown. What is the
reading on the scale?
A. 0 N B. 50 N C. 150 N D.200 N
Directions: Decrypt the following cryptograms. The titles are the clues of the phrases that
you need to crack. These phrases are quotes which exhibits life’s action-reaction forces.
Enjoy decoding!
2
2. Spiritual Reaction of a person
3. Emotional forces
4. To accept or to surrender
2
5. Self-Realization
Reflection:
In the third law of motion, if there is an action, there will be a reaction. In real-life
situations, good deeds can yield the same. Thus, be reminded of the golden rule: do unto
others what you want others to do unto you (Arevalo, R., 2017)
1. I learned that
2. I enjoyed most on
2
References:
Answer Key:
Activity 1
1. Action: A bird wings pushes the air downwards.
Reaction: The air pushes the bird upwards for lift.
2. Action: The man exerts a downward force on the diving board.
Reaction: The diving board simultaneously exerts an equal force on the man but in the
upward direction.
3. Action: A person exerts a force against the floor (down and backward).
3
Reaction: The floor exerts a force back (up and forward), causing you to move forward.
4. Action: A fireman has to hold on tightly to a fire hose
Reaction: The hose will fly backwards as water shoots out from it.
5. Action: The swimmer pushes against the water
Reaction: The water pushes back on the swimmer and pushes him forward.
Activity 2
1. 6.
5. 10.
3
Activity 4
1. B
2. C
3. C
4. A
5. A
6. C
7. D
8. A
9. C
10. A
Activity 5
1. Create gaps between stimulus and reaction and the gap will show you the path by
Amit Ray
2. God’s reaction towards things is different from ours and He wishes that our reaction
will line up with His by Sunday Adelaja
3. How you react emotionally is a choice in any situation. by Judith Orloff
4. Acceptance is an active response to a temporary situation; surrender is a passive
reaction to a situation that you think will last forever by Oli Anderson
5. If a man realizes who he is, he will not react to the negative things surrounding him
by Sunday Adelaja.
Prepared by:
RIZZA C. BALORAN
MARIA LORESA J. TUMANGUIL
Tuguegarao City Science High School
Illustrator:
TRISHA ELIZABETH J. TUMANGUIL
3
SCIENCE 8
Name of Learner: Grade Level:
Section: Date:
3
Credits: https://www.storyboardthat.com/(https://www.storyboardthat.com/portal/storyboards/
sheela0202 88/class-storyboard/potential-and-kinetic-energy3)
Learning Competency and Code: Identify and explain the factors that affect the Potential
Energy and Kinetic Energy of the object. (S8FE-Id-22)
3
Activity 1:
How Potential am I?
Potential energy= weight x height (P.E =w x h)
Directions: Study tableNote:
A andSince
table weight=mass
B below and analyze the different
x acceleration due to quantities given. Then,
answer the questions that follow.
gravity, P.E can be written also as (P.E =m x g x
h)
Table A: PE of the object when the mass varies while the height remains the same
Mass, kg Acceleration due Thetounits used Height, m
gravity, P.E
2are: Energy
m/s (P.E=mgh),
=Joules, J Weight= J
1 9.8 Newtons, N 2 19.6
2 Height= meters, m
9.8 2 39.2
3 9.8 2 58.8
Table B: PE of the object when the mass remains the same as height increases
Acceleration P.E
Mass, kg due to gravity, Height, m (P.E=mgh),
m/s2 J
2 9.8 1 19.6
2 9.8 2 39.2
2 9.8 3 58.8
1: In table A, what happens to the P.E of the object when mass increases but the height of the
object remains the same?
2: In table B, what happens to the P.E of the object when height increases but the mass of the
object remains the same?
3
4: How can mass/weight and height affect the P.E of an object?
6: Give at least two (2) situations where we can apply P.E in our real life.
3
Activity 2: Kick Here! Kick There! KINETIC Anywhere!
(Velocity)2, K.E
Mass, kg m2/s2 (K.E=1/2 mv2),
J
0 2 0
1 2 2
2 2 4
Table D: KE of the object when the mass remains the same while the square of
its velocity increases
1. In table A, what happens to the K.E of the object when mass increases but the velocity
of the object remains the same?
2. In table B, what happens to the K.E of the object when the velocity doubles but the
mass of the object remains the same?
3. What happens to the K.E of an object when the object is massless? When velocity is
zero? What can you infer in this situation?
3
4. What are the factors that affect the K.E of an object?
7. Give at least two (2) applications/situations where we can apply K.E in our real life.
Directions: Identify the relationship between Kinetic Energy and Potential Energy of the
cyclist at each position as shown in the illustration below. Choose the letter of your answer
from the given choices.
1
3
Credits: https://www.google.com/search?q=comic+strip+on+potential+and+kinetic+energy+png
3
Activity 4: Game of Energetics
Adapted from: theeducationcenter.com by PINTEREST
Directions: In the following competition, Team Potential and Team Kinetic will each try to
emerge as the winner. To find out who comes out on top, read the description of each
player’s energetic action. Then check the correct box to indicate which team can take credit
for the action. When finished, total the scores and show the final results on the scoreboard.
ENERGY SCOREBOARD
POTENTIAL KINETIC
3
Activity 5: PE and KE are PROBLEMatic
2. A 1500-kg automobile is traveling at a velocity of 120 m/s. How much kinetic energy
does it possess?
3. A flower pot has a mass of 8kg on a window 30 meters from the ground. What is the
gravitational potential energy of the flower pot in joules?
4. A toy car that weighs 15 kg is rolling down a hill with a velocity of 4.5 m/s. What is
the kinetic energy of the toy car?
5. A 25 kg block is raised by a crane 4 meters above the ground. What is the potential
energy of the block?
4
REFLECTION:
1. I learned that
2. I enjoyed most on
4
References:
Campo, Pia C., et.al. 2003. Science – Grade 8. Learner’s Module. Pasig City. Department of
Education.
4
Answer Key:
4
Activity #4: Game of Energetics
1. P.E 6. K.E
ENERGY SCOREBOARD
2. P.E 7. K.E POTENTIAL KINETIC
3. K.E 8. K.E 5 5
4. P.E 9. P.E
5. K.E 10. P.E
Prepared by:
SHEELA A.
APOSTOL EDGAR A.
SADDUL
Tuguegarao City Science High School
4
SCIENCE 8
4
Activity 1. 3 Pics, 1 Concept
Directions: The diagram below shows the air temperature in some areas, and the speed of sound.
Study the diagram and answer the questions that follow.
Source: www.nde.ed.org/EducationResources/HighSchool/Sound/tempandspeed.html
Questions:
1. What is the speed of sound at the lowest temperature given in the diagram?
2. What is the speed of sound at the highest temperature given in the diagram?
4
Activity 2. Solve for v
Directions: The table below shows some cities in the world and their recorded air temperature in a
certain time. Using the formula v = 331m/s + 0.6m/s/oC (T), calculate the speed of sound in each
given location. Record your answers in the table. Show your complete solution. Start with the given
quantities, required or unknown, formula, solution, and final answer. A rubric will be used to evaluate
your answers. Then, answer the questions that follow.
Madrid, Spain 6
Wuhan, China 15
Tuguegarao City, Philippines 40
Given: Given:
Required: Required:
Formula: Formula:
Solution: Solution:
Answer: Answer:
4
Wuhan, China Tuguegarao City, Philippines
Given: Given:
Required: Required:
Formula: Formula:
Solution: Solution:
Answer: Answer:
Questions:
1. a. What city is relatively the hottest?
b. What is the speed of sound in this city?
c. Is it relatively the fastest? or slowest?
2. a. What city is relatively the coldest?
b. What is the speed of sound in this city?
c. Is it relatively the fastest? or slowest?
3. What is the effect of temperature to the speed of sound in air?
Five parts, Four parts are Three parts are One or Two No part is
namely Given complete and complete and parts are properly written
quantity, properly written properly written complete and
Required or properly written
unknown,
Formula,
Solution, and
Final answer are
complete and
properly written.
Each quantity Each quantity Three or four One or two Quantities have
involved has involved has quantities have quantities have no unit of
correct unit of correct unit of correct unit of correct unit of measurement
measurement measurement measurement measurement
4
Activity 3. Hotter, Faster
Directions: Sound waves also travel through solid, and liquid like water. The table below shows the
speed of sound in water at different temperature. Study the data, and answer the questions that follow.
Questions:
1. What happens to the speed of sound in water when the temperature increases?
2. What happens to the speed of sound in water when the temperature decreases?
3. Based on the table, what is the effect of temperature to the speed of sound in water?
4
Activity 3. Hotter, Faster
Directions: Sound waves also travel through solid, and liquid like water. The table below shows the
speed of sound in water at different temperature. Study the data, and answer the questions that follow.
Questions:
1. What happens to the speed of sound in water when the temperature increases?
2. What happens to the speed of sound in water when the temperature decreases?
3. Based on the table, what is the effect of temperature to the speed of sound in water?
5
Activity 4. #Relationship
Directions: Given the data in Table 3 below, draw the graph properly and find out the relationship
between the Temperature and the Speed of Sound. A Rubric will be used to check your graph.
Temperature (oC)
Questions:
1. What is the shape of the graph?
5
4. At what temperature where the particles of air vibrate the fastest?
5. At what temperature where the particles of air vibrate the slowest?
6. Explain your answer in number 4 and 5 briefly.
7. At what condition where the speed of sound becomes zero? What is its possible implication?
Reflection:
1. I learned that
2. I enjoyed most on
5
References:
Campo, Pia C., et. al. 2003. Science-Grade 8. Learner’s Module. Pasig City. Department of
Education.
Young, Hugh D. and Freedman, Roger A. 2002. University Physics with Modern Physics. Singapore
629733. Pearson Education Asia Pte Ltd.
www.nde.ed.org/EducationResources/HighSchool/Sound/tempandspeed.html
5
Answer Key:
Activity 1. “3 Pics 1 Concept”
1. What is the speed of sound at the lowest temperature given in the diagram? 330.4 m/s
2. What is the speed of sound at the highest temperature given in the diagram? 358.0 m/s
3. At what temperature where sound travels the slowest? - 1 ºC
4. At what temperature where sound travels fastest? 45 ºC
5. How does temperature affect the speed of sound? The higher the temperature, the
faster the speed of sound; or The lower the temperature, the slower the speed of
sound
5 4 3 2 1
Five parts, namely Four parts are Three parts are One or Two No part is
Given quantity, complete and complete and parts are properly written
Required or properly written properly written complete and
unknown, properly written
Formula, Solution,
and Final answer
are complete and
properly written.
Each quantity Each quantity Three or four One or two Quantities have
involved has involved has quantities have quantities have no unit of
correct unit of correct unit of correct unit of correct unit of measurement
measurement measurement measurement measurement
5
Table 1. Speed of sound in some cities in the world at different temperature
Activity 4. “#Relationship”
5
Rubric for the graph
5 4 3 2 1
Numbers in the X Numbers in the X Numbers in the X Numbers in Numbers in both
and Y axes are and Y axes are and Y axes are either X or Y X and Y axes are
properly scaled. properly scaled. properly scaled. axes are properly not properly
scaled. scaled.
5 data points are 4 data points are 3 data points are 2 data points are 1 or no data point
properly plotted. properly plotted. properly plotted. properly plotted. is properly
plotted.
Line that best Line that best Line that best A line is drawn No line is drawn
fits the data fits the data fits the data from one point to
points is points is points is another point.
properly drawn. properly drawn. properly drawn.
Prepared by:
GEMMA U. PACAMALAN
Cagayan National High School
REOWIN PALATTAO
Gosi National High School
5
SCIENCE 8
Name of learner: Grade level:
Section: Date
5
Activity 1. Complete Me
Directions: Unscramble the word/s to get the correct term and fill the appropriate blanks to
complete the statements below.
5
Activity 2. Who Am I?
Directions: The diagram below shows the separation of white light into different colors as it
hits the prism. Color the refracted rays. Then, answer the questions that follow.
1. What do you call the process of separating white light into its components?
6. What name or code could you give according to the hierarchy of colors?
VIOLET
RED
5
Activity 4. Relate Me
Directions: Draw and color the rainbow with the corresponding bond of colors in relation
to its wavelength.
6
Activity 5. Color Me
Directions: Color the spectrum wheel based on the given corresponding frequency,
wavelength and energy.
6
Activity 6. Fill Me
Directions: Using the illustration of Color Wheel in Activity 5, fill out the table with
the corresponding wavelength, frequency and energy.
Table 1
Frequency Wavelength Energy
Red
Orange
Yellow
Green
Blue
Violet
Activity 7. Compare Me
1. Compare the following color bonds using the descriptions (lower, higher, shorter, and
longer).
a. Red is in wavelength than violet.
b. Yellow is in energy than blue.
c. Violet is in frequency than red.
d. Red is in energy than violet.
e. Blue is in wavelength than red.
6
Activity 8. Link Me
Directions: Use the illustration of electromagnetic spectrum in answering the questions that
follow.
https://www.miniphysics.com/electromagnetic-spectrum_25.html
1. Does the frequencies of the colors of light increase from red to violet?
2. What did you observe about the wavelengths and frequencies of the colors of light?
4. What did you observe about the corresponding energies from red to violet?
Reflection:
1. I learned that
2. I enjoyed most on
6
References:
Campo, Pia C., et. al. 2003. Science – Grade 8. Learner’s Module. Pasig City. Department of
Education.
Rabago, Lilia M., Ph.D.,et.al. 2001. Science and Technology IV: Physics Textbook for Fourth
Sotto, R.L., et. al. 2003. Science in Today’s World: Physics. Manila: Rex Bookstore, Inc.
https://www.miniphysics.com/electromagnetic- spectrum_25.html
https://www.youtube.com/watch?v=ASEdGwpyn58&t=4s
https://www.youtube.com/watch?v=TvT3g8kU6SQ
6
Answer Key:
Activity 1- Complete Me
1. White light
2. Spectrum
3. bending
4. Dispersion
5. Total internal reflection
6. Color
7. Critical angle
8. Wavelength
9. Speed
10. Reflection
Activity 2-Who am I?
1. Dispersion
2. Violet
3. Red
4. Spectrum
5. Red, orange, yellow, green, blue, indigo, violet
6. ROY G BIV
Activity 4 – Relate Me
1. Red
2. Violet
3. Red -- Red has longer arc / wavelength
4. Violet – Violet has short arc//wavelength
6
Activity 5 Color Me
Activity 6 – Fill Me
6
Activity 7- Compare Me
1. a. longer
b. lower
c. higher
d. lower
e. shorter
2. a. Red
b. Violet
c. Red
d. Violet
e. Violet
f. Red
Activity 8- Link Me
1. Yes.
2. The wavelengths and frequencies of the colors of light vary. The wavelength
decreases from red to violet while the frequency increases from red to violet.
3. The higher the frequency of the color of light, the greater is its energy.
4. As the frequency of the color of light increase, the energy also increases. Red has the
least frequency with the least energy and violet has the highest frequency and the
highest energy.
5. The spectral colors have the following characteristics; frequency, wavelength and
energy. The color of light with longer wavelength travels slowly and has low
frequency and energy. The color of light with shorter wavelength travels faster and
has higher frequency and energy.
Prepared by:
VENIE N. DE LEON
Cagayan National High School
6
SCIENCE 8
Name: Grade Level:
Date: Score:
Heat is often associated with temperature. In a typical life, one has to cook food using
wood or other fuels like LPG. Burning fuels generate heat. Heat generated, on the other hand,
is associated with increase in temperature. However, this is not always the case. Though heat
and temperature are related to each other, they are two different concepts. The difference
between these terms has something to do with the movement between atoms and molecules –
the kinetic energy of substances. The Kinetic Molecular Theory of matter states that matter
consists of particles that are constantly moving. Take into consideration the Figure 1 below.
Heat
Heat
A B
Figure 1 above shows that regardless of the volume of water, the temperature of the
two set-ups remain the same upon reaching their boiling points. There are more water
molecules in beaker A containing 500 ml water, thus, requiring longer time for it to boil than
100 ml of water in beaker B. The higher the number of water molecules, the higher also is its
heat /internal energy.
6
Temperature is the measure of hotness or coldness of a body and is measured by the
use of thermometer (Madriaga et. al, 2013).It is the average kinetic energy which indicates the
direction in which heat flows. Heat, on the other hand, is the energy that transfers from a
body of higher temperature to another body of lower temperature through molecular
collisions and cannot be directly measured. When heat is absorbed or given off by an object,
its temperature changes. If heat is added to an object, the particles of the object move faster
and the body’s temperature increases. If heat is transferred or removed from an object, the
particles move slower and the body’s temperature decreases. As the thermal energy of a
substance increases, its particles spread out and the substance expands in a process known as
thermal expansion. Almost all materials expand when heated and contract when cooled
(Padua et.al, 2010). Moreover, phase changes occur when heat is added to or removed from
an object. Different materials also have the ability to absorb or release heat that result in
temperature change. The amount of heat required by a material to increase its temperature of
one-unit mass of a given material by one Celsius degree or by one Kelvin is called specific
heat capacity (C). Padua et. Al, 2010).
6
Activity 1: Word Hunt
Directions: Search the words being described in the sentences below. The answers may be
found horizontally, vertically or diagonally.
1. It is a thermal sensor that measures temperature.
2. A process when matter changes from state to another.
3. A measure of the warmth of an object or substance.
4. A measure of relatively low temperature of an object or substance.
5. The energy that is contained within a system that is responsible for its temperature.
6. Increase in the size of a material.
7. The decrease in the size of a material.
7
Activity 2: Heat vs. Temperature
Directions: Choose the corresponding characteristics of heat and temperature on the choices
given below. Write the letter of the correct answer on the space provided.
Heat Temperature
What are the differences between Heat and Temperature?
Directions: Write TRUE if the statement is correct. Write FALSE if the statement is wrong
and change the underlined word/s to make the statement correct. Write your answer on the
space provided.
1. Liquid expands when heated.
2. Thermal expansion applies to solid and liquid.
3. Materials take up more space when heated
4. Solid expands more than liquid when heated.
5. The particles of liquid move freely when
heated.
6. Water expands when cooled.
7. Molecules move far each other during
contraction.
8. Only the spaces between particles changes
during expansion and contraction.
9. Electrical wires could sag during hot days.
10. Tight bottle cap can easily open by putting it in
hot water.
7
Activity 4: Going Phase Change
Directions: Write the letter of the missing data on the graph below showing the phase change
of water. Choose your answer on the box. Then, answer the questions that follow.
A. vaporization B. D. G. melting
C. sublimation E. ice
F. liquid
Temperature
6.
steam
100oC
5.
4.
0oC 3.
2.
1.
Heat Energy
Source: “Phase Change: Evaporation, Condensation, Freezing, Melting ...” Accessed June 4,
2020. https://spiral.ac/lesson-plan-ideas/clips/lessons/phase-change-evaporation-
condensation-freezing-melting-sublimation-deposition.
1. What happens to the temperature and heat energy of a substance during a change of state?
2. What happens when heat is added once the phase change is complete?
7
3. What can you infer about the relationship between phase change and heat energy?
Directions: Analyze the data below of the temperature change of different substances in a
given time. Using the graph, plot the time in the x-axis vs the given values for each substance
in the y-axis. Then, connect the graph of each of the three substances. Create a line graph for
each substance below and answer the questions given. Use colored pen or crayon to connect
the graph following the color coding below:
Blue - water
Yellow- sand
Red - Iron
7
B. Answer the following questions:
1. What is the order of the substances based on the time required to heat from slowest to
fastest?
4. When you boil water using a pot on the stove, which heats faster, the iron pot or the
water? Explain your answer.
5. When you go to the beach you noticed that the sand is hotter than water although both
are exposed under the heat of the sun. Why do you think this happens?
6. Based on the graph, which of the three substances has the highest specific heat
capacity? Which substance has the lowest specific heat capacity?
Reflection:
4. I learned that
5. I enjoyed most on
74
References
Madriaga, Estrellita A, Meliza P Valdoz, and Jonna M Abistado. 2013. Science Links. First
Ed. Sampaloc, Manila, Philippines: Rex Book Store, Inc.
Ocampo, Pia C. et.al. 2013 Science 8 Learner's Module. 1st ed. Pasig City, Philippines:
Department of Education.
Padua, Alicia L, and Ricardo M Crisostomo. 2010. Practical and Explorational Physics.
Second ed. Quezon City, Philippines: Vibal Publishing House, Inc.
Santos, Gil Nonato C., and Alfonso C. Danac. 2006. i-Physics (Investigatory Physics).
Firsted. Sampaloc, Manila, Philippines: Rex Book Store, Inc.
Website
“Ninth Grade Lesson Introduction to Specific Heat ...” Accessed June 3, 2020. Retrieved
from https://betterlesson.com/lesson/640676/introduction-to-specific-heat
“Phase Change: Evaporation, Condensation, Freezing, Melting ...” Accessed June 4, 2020.
Retrieved from
https://study.com/academy/lesson/phase-change-evaporation-condensation-freezing-
melting.html
“The Physics Classroom Tutorial.” The Physics Classroom. Accessed June 3, 2020.
Retrieved from https://www.physicsclassroom.com/Class/thermalP/u18l1d.cfm
Velez, Sierra. “Blendspace Created For Physical Science By Sierra Velez ...” Blendspace
Created For Physical Science. Accessed June 3, 2020. Retrieved from
https://www.tes.com/lessons/AX17cZ8TBxwrrg/blendspace-created-for-physical-
science-by-sierra-velez
“What Is Thermal Energy? (Article) | Khan Academy.” Accessed June 4, 2020. Retrieved
from
https://www.khanacademy.org/science/physics/work-and-energy/work-and-energy-
tutorial/a/what-is-thermal-energy
75
Answer Key
B.
1. During a change of state, the temperature of a substance remains constant, while the
thermal energy changes.
2. Once the phase change is complete, adding more heat causes the temperature to
increase.
3. Heat energy is needed in phase change.
76
Activity 5: Graph it Down
B.
Prepared by:
KAREN C. GACUTAN
Linao National High School
77
SCIENCE 8
Name of Learner: Grade Level:
Section: Score:
In an electric circuit, the voltage is the work done in moving or pushing the charged
electrons (current) from one point to another in the circuit. The current in the circuit, on the
other hand, is responsible for illuminating the bulb or in rotating the electric fan as the case
maybe. The amount of current in the circuit is dependent upon the voltage applied. This
amount of current can be indicated by the intensity of brightness in the case of a lighted bulb.
Voltage, V is directly proportional to current, I, that is
V I
or V= kI
Where k, the proportionality constant, is the slope of the V vs I graph. This constant k
is equal to the resistance, R of the circuit, so
R = V/I
The unit of electrical resistance is defined as
R = volt (V)/ampere (A) or ohm ( )
1 = 1 V/A
The relationship between voltage, current and resistance is known as Ohm’s Law,
named after George Simo Ohm, who pioneered the study of such relation. Ohm’s law states
that current, I is directly proportional to the voltage, V and inversely proportional to the
resistance, R. In equation: I = V/R
78
Most electric circuits we see operate on more than one load called multiple load
circuits. For instance, when you turn on light in the dining room, lamps in your bedroom
remain unlighted, but if you remove one light bulb from Christmas bulbs, the other bulbs no
longer light.
Light bulbs in houses are connected differently from that of Christmas bulbs. The
connection of light bulbs at home is called parallel while the Christmas light bulbs is in
series.
A series connection has two or more loads but current flows through a single
conducting path while parallel connections has more than one path for current to flow. The
figure below shows the differences between series and parallel connections.
Applying Ohm’s law for series and parallel connections consider these equations
below.
Series connections
IT = I1 = I2 = I3 …
VT = V1 + V2 + V3 +…
RT = R1 + R2 + R3 +…
Parallel connections
IT = I1 + I2 + I3 +…
VT = V1 = V2 = V3 …
_1_ = _1_ + _1_ + _1_ + …
RT R1 R2 R3
This learning activity sheet will help you understand more of the relationship between
voltage and current.
79
Activity 1: Voltage vs. Current
Directions: Complete the chart below to show comparison between voltage and current.
Voltage Current
Symbol
Unit
SI Unit
Definition
Measuring
Instrument
80
Activity 2: The Brighter, the Better
Study the circuit diagrams below showing identical bulbs connected to a circuit with different
number of batteries. Then, answer the questions that follow.
Figure 3.
Figure 4
.
Figure 5.
81
Activity 3. “Follow Me”, Relationship between Current and Voltage
The figure below is the Experimental Set-up for finding the relationship between
voltage and current. Analyze the data taken from the experiment and do the instructions that
follow.
Fig. 6
Data taken from the experiment:
82
3. Draw a line of best-fit using the plotted points.
4. Describe the graph?
5. What does the graph indicate?
6. What becomes of current, I as the voltage, V is increased?
7. What becomes of current, I as the voltage, V is decreased?
8. How will you describe the quotient when you divide voltage by current in
column 4 of Table 1?
9. What electrical quantity represents this in the circuit?
10. What can you infer/conclude about the relationship between voltage and
current for the same/constant load or resistor?
2. An electric heater uses 4A when 220-V are applied to its terminals. Determine its
resistance.
83
3. What is the voltage across an electric hot plate which is draws 11A from the line
when its hot resistance is 20 ?
6. What is the resistance of a lamp which allows 10.9A when 220V is applied to it?
7. How much current would a 12 bread toaster draw when connected to a 220V outlet?
8. A resistor is connected to a 12V battery. The ammeter in the circuit reads 2A. What is
the value of the resistance?
84
9. If the voltage in the circuit were doubled, what would happen to the current in the
circuit?
10. If current in the circuit doubles of the same voltage, what will happen to the resistance
in the circuit?
As electrons flow through a conductor, they collide with the vibrating atoms of the conductor and these e
Directions: Use the table below to answer the questions that follow.
Table 2: Resistivity of some materials at 200C.
Material Resistivity (
Silver 1.47 x 10-8
Copper 1.72 x 10-8
Gold 2.44 x 10-8
Aluminum 2.63 x 10-8
Tungsten 5.51 x 10-8
Steel 20.0 x 10-8
Mercury 95.0 x 10-8
Nichrome 100.0 x 10-8
Carbon 3.5 x 10-5
Source: Young, Hugh D. and Roger A freedom. University Physics with Modern Physics. 11 th
Ed. Pearson Wesley. 2004
85
2. Which of the given materials have the greatest resistivity?
3. Explain why silver and gold are not used as household wirings despite of having the
least resistivity.
Figure 7a Figure 7b
1. When you connect the four bulbs to a 12V power supply switch in series as shown in Figure
7a and turn the switch on, what happens to the other bulbs when you unscrew one light
bulb?
2. What if you will screw the one light bulb in Figure 7a, what do you observe?
4. When you connect the three bulbs to a 12V power supply as shown in Figure 7b and turn the
switch on, what happens to the other bulbs when you unscrew one light bulb?
5. What if you will screw the one light bulb in Figure 7b, what do you observe?
86
6. How do you describe this type of connection?
7. What is the difference between series connection and parallel connection based on
your observations from the two set up?
9. Why are electric meters connected in series with the rest of the circuits in the house?
10. Why is the main switch connected in series with the rest of the circuits in the house?
Directions: Perform the indicated operations. Write the equations and solve for the unknown
quantity.
1. Suppose there are four 30 bulbs are connected in series connected to a 220V line,
what is the current in the circuit? Find the voltage drop in each of the four 30 bulbs.
2. You have five appliance connected in series as shown in the figure below. The
refrigerator has a resistance of 20 , the TV set 10 , the radio 5 , the flat iron 75
and the electric stove 55 , what is a( total resistance in the circuit b) total current
c) voltage drop in each appliance
87
a. total resistance in the circuit
b. total current
88
c. Current through each resistor
89
c. Current in each resistor
90
c. Total current through the circuit, and
d. Total resistance
Reflection:
1. I have learned that
2. I enjoyed most on
References:
Acosta Herma D et.a. 2015. Science 10 Learner's Module. 1st ed. Pasig City: Department of
Education.
Arciaga, Marco E et. Al. 2008. Exploring Science and Technology. Paranaque City: Diwa
Scholastic Press Inc.
Benetillo, Eulalia N et. al. 2009. Science and Technology IV Textbook for Fourth Year.
Revised Edition. Quezon City: Book Media Press.
91
"Current vs Voltage." Diffen.com. Diffen LLC, n.d. Web. 13 Jun
2020.< https://www.diffen.com/difference/Current_vs_Voltage >
Ocampo, Pia C. et.al. 2013. Science 8 Learner's Module. 1st ed. Pasig City: Department of
Education.
Padua L Alicia et. al. 2003. Practical and Exploration Physics. Quezon City: Vibal
Publishing House Inc.
Voltage, Current, Resistance and Ohm’s Law. Sparkfun Electronics. Accessed June 17, 2020.
https://learn.sparkfun.com/tutorials/voltage-current-resistance-and-ohms-law
Answer Key:
Activity 1: Voltage vs. Current
Voltage Current
Symbol V I
Unit V or volts or voltage A or Amp or amperage
SI Unit 1 volt = 1 joule/coulomb. 1 ampere =1
(V=W/C) coulomb/second.
Definition Voltage, also called electromotive Current is the rate at which
force, is the potential difference in electric charge flows past a
charge between two points in an point in a circuit. In other
electrical field. words, current is the rate of
flow of electric charge.
Relationship Voltage is the cause and current is Current is the effect (voltage
the effect. Voltage can exist being the cause). Current
without current. cannot flow without Voltage
Measuring Voltmeter Ammeter
Instrument
Field created An electrostatic field A magnetic field
In a series Voltage gets distributed over Current is the same through
connection components connected in series. all components connected in
series.
In a parallel Voltages are the same across all Current gets distributed over
connection components connected in parallel. components connected in
parallel.
92
Activity 2: The Brighter, The Better
1. Figure 5
2. Figure 5
3. Figure 3
4. Figure 3
5. 1 x 1.5 volts = 1.5 volts
6. 2 x 1.5 volts = 3.0 volts
7. 3 x 1.5 volts = 4.5 volts
1. Voltage,V Current, I
Number of
Voltage,V/ Current, I
dry cells (Volts) (Ampere)
1 1.5 0.15 10
2 3.0 0.30 10
3 4.5 0.45 10
4 6.0 0.60 10
2&3
93
9. The electrical quantity being described in this constant value is called resistance, R.
10. Current, I is directly proportional or dependent to voltage, V. For the same load or
resistor, a uniform increase or decrease in voltage would result in a uniform
increase or decrease in current.
Required: I Required: R
3. 4.
Given: I=11A, R=20 Given: V=220V, I=8A
Required: V Required: R
Formula: V = IR Formula: R = V/I
5. 6.
Required: I Required: R
Required: I Required: R
94
9.The current, I in the circuit also 10.The resistance, R in the circuit was
doubled reduced to 50%
95
IT = VT/RT
= 220V/120
= 1.83A
IT= I1 = I2 = I3 = I4
V1 = I1R1
= 1.83A(30
= 54.9V
V2 = I2R2
= 1.83A(30
= 54.9V
V3 = I3R3
= 1.83A(30
= 54.9V
V4 = I4R4
= 1.83A(30
= 54.9V
V T= V 1 + V2 + V3 + V4 = 219.6Vor 220V
2.
a) RT = RT + RT + RT + RT
= 20 + 10 + 5 + 75 + 55
= 165
b) IT = VT / RT
= 220V/165
= 1.33A
c) Iref = V1R1 = (1.33A) ( 00 ) = 26.6V
ITV = V1R1 = (1.33A) ( 10 ) = 13.3V
Iradio = V1R1 = (1.33A) ( 5 ) =
6.65V
Iflat iron = V1R1 = (1.33A) ( 75 ) = 99.75V
Istove = V1R1 = (1.33A) ( 55 ) = 73.15V
3.
a) 1/ RT =1/ R1 + 1/R2 + 1/R3
96
1/ RT =11 / 12
( 11 RT)/ 11 = 12/11
RT = 1.09
b) IT = VT / RT
= 6V / 1.09
= 5.50A
c) I1 = V1//R1
I1 = 6V/ 2
IT = 3A
I2 = V2//R2
I2 = 6V/ 4
IT = 1.5A
I3 = V3//R3
I3 = 6V/ 6
IT = 1A
d) VT = V1 = V2 = V3 = 220V
4.
a) RT = R1 + R2 + R3
= 2 +4 + 6
= 12
b) IT = VT / RT
= 6V / 12
= 0.5A
c) IT = I1 = I2 = I3 = 0.5A
d) V1 = (I1 )(R1)
= (0.5A) (2 )
= 1V
V2 = (I2 )(R2)
= (0.5A) (4 )
= 2V
97
V3 = (I3 )(R3)
= (0.5A) (6 )
= 3V
VT = V1 +V2 + V3
= 1V + 2V + 3V
= 6V
5.
a) Vt = V1 = V2 = V3 = 220V
b) I1 = V1 / R1
= 220V / 240
= 0.92A
I2 = V 2 / R 2
= 220V / 280
= 0.78A
I3 = V3 / R3
= 220V / 300
= 0.73A
c) It = I1 + I2 + I3
= 0.92A + 0.78A + 0.73A
= 2.43A
d) 1 / RT = 1/ R1 + 1/R2 + 1/R3
98
Rubric for the problem solving:
5 4 3 2 1
Five parts, namely Given Four parts Three parts One or Two No part is
quantity, Required or are complete are complete parts are properly
unknown, Formula, and properly and properly complete and written
Solution, and Final written written properly written
answer are complete and
properly written.
Each quantity involved Each Three or four One or two Quantities
has correct unit of quantity quantities quantities have have no unit
measurement involved has have correct correct unit of of
correct unit unit of measurement measurement
of measurement
measurement
Prepared by:
MAPHILINDO C. TURARAY
99
SCIENCE 8
Name: Section:
Date:
From your previous lessons about electricity, you have learned that an electrical
circuit consists of a load which can be electric bulbs or electrical appliances which consumes
electrical power; a voltage source like batteries or generator which supplies electrical energy
or a potential difference between two points within an electrical circuit allowing current to be
flowing around it; and connecting wires which provides the path for electrons or current to
flow. This electrical circuit can be connected either in series or parallel. Series connection
has only one path or route for electrons or current to flow, hence, current is the same
anywhere in the circuit. For example, if there are three bulbs connected in series, the bulbs
will have a lesser brightness since the voltage (measure of strength of electrical power) is
shared in ratio to resistance (limits or opposes the flow of electrical current). If one of the
bulbs gets busted, the other two bulbs will not work properly or do not produce light since the
flow of current is broken or disconnected. Furthermore, as the number of loads are increased
in the series circuit, the greater circuit’s resistance is produced.
Parallel connection on the other hand, has two or more paths or routes for the
flow of current. This explains that the current splits or divides among the loads such as bulbs
or appliances. In this case, the voltage across each pathway is the same throughout the circuit.
For instance, if there are three bulbs of the same wattage connected in parallel, each bulb
produces equal brightness. If one of the bulbs gets busted, the other bulbs will not be affected
and still light up because each bulb has a separate connection to a voltage source in the
circuit. In other words, if problem may occur in one of the connections in the circuit, other
connections will not be affected, hence, current will still pass through in the undisturbed
connections. This is the reason why parallel connections are preferred in household wirings
because home appliances and other electrical devices operate on the same voltage and that
loads or appliances are often switched on and off separately.
10
Activity 1: Label Matters
I. Directions. Name the two circuits according to the type of connection it represents.
Write your answer on the blank below.
A B
b d e f
c
f
Source: www.physicsclassroom.com
II. Directions: Answer the following questions regarding circuits A and B above.
2. In circuit A, if bulbs b and c burn out, will bulb a still light? Why?
4. In circuit B, if bulbs d and f are missing, will bulb e still light? Why?
5. Which do you prefer in your own household electrical wirings, series connection or
parallel connection? Why?
10
Activity 2: Ignite Your Power to Analyze
Directions: Study the illustration below and answer the questions that follow.
Source: VectorStock.com/20558187
1. If the stand fan is switched off, will the other appliances still continue to work? Why?
2. If the stand fan and television are not plugged into an outlet, will the refrigerator function?
Why?
3. If both the refrigerator and stand fan are unplugged, will the television still work? Why?
4. If all appliances are plugged into individual outlets, does it affect the voltage source?
Why?
5. Appliances at home are usually connected in parallel. What are the advantages of having a
parallel connection in household electrical connection?
10
Activity 3: Glow in the Dark
Directions: Analyze the illustrations below and answer the questions that follow.
a b c
1. If bulb a is removed from the circuit, will the rest of the bulbs or appliances still work?
Why?
3. If two more bulbs are added in the circuit, will the brightness be the same as that of the
three bulbs? Why?
5. How are the appliances and electric bulbs connected in the circuit? Is this type of
connection possible? Why or why not?
10
Activity 4: Explore Your Bright Side
Directions: Seek the assistance of your parents to inspect your household electrical
connections and answer the following guide questions.
3. If the electric iron, stand fan and the bulb are connected in series, can your mother still
continue to iron your clothes? Why?
4. If the electric iron, stand fan and the bulb are connected in parallel, can your mother still
continue to iron your clothes? Why?
5. What are the advantages and disadvantages of series connection? How about the
advantages and disadvantages of parallel connection? Complete the table below.
Disadvantages
10
Activity 5: Spark Your Best Option
Directions: Given the situations below, select one of your best choice and work for it.
1. Draw a poster about the advantages and disadvantages of series and parallel connections in
homes.
2. Create a two-minute promotional video on the advantages and disadvantages of series and
parallel connections in homes.
3. Make a rap song in the form of audio-video about the advantages and disadvantages of
series and parallel connections in homes.
POSTER MAKING
Needs
Excellent Good Fair
CATEGORY Improvement
4 3 2
1
Graphics are Most graphics
Most graphics
all in focus are in focus
are in focus and Many graphics
and the content and the
Graphics - the content is are not clear
easily viewed content easily
Clarity easily viewed or are too
and identified viewed and
and identified small.
from 6 ft. identified from
away. 6 ft. away. from 4 ft. away.
Several of the
graphics used One or two of
on the poster the graphics The graphics
reflect a used on the are made by the No graphics
Graphics - exceptional poster reflect student, but are made by the
Originality degree of student based on the student are
student creativity in designs or ideas included.
creativity in their creation of others.
their creation and/or display.
and/or display.
All graphics
All graphics Graphics do
are related to
are related to not relate to
the topic and All graphics
the topic and the topic OR
most make it relate to the
make it easier several
Graphics - easier to topic. Most
to understand. borrowed
Relevance understand. borrowed
All borrowed graphics do
All borrowed graphics have a
graphics have not have a
graphics have source citation.
a source source
a source
citation. citation.
citation.
10
Almost all
All items of items of Several items
importance on importance on of importance Labels are too
the poster are the poster are on the poster small to view
clearly labeled clearly labeled are clearly OR no
Labels
with labels that with labels labeled with important
can be read that can be labels that can items were
from at least 3 read from at be read from at labeled.
ft. away. least 3 ft. least 3 ft. away.
away.
The poster
includes all All but 1 of the
All required Several
required required
Required elements are required
elements as elements are
Elements included on elements were
well as included on the
the poster. missing.
additional poster.
information.
Student can
Student can Student can Student
accurately
accurately accurately appears to
answer about
answer all answer most have
75% of
questions questions insufficient
Knowledge questions
related to facts related to facts knowledge
Gained related to facts
in the poster in the poster about the facts
in the poster
and processes and processes or processes
and processes
used to create used to create used in the
used to create
the poster. the poster. poster.
the poster.
At least 7 5-6 accurate 3-4 accurate Less than 3
Content - accurate facts facts are facts are accurate facts
Accuracy are displayed displayed on displayed on are displayed
on the poster. the poster. the poster. on the poster.
The poster is
The poster is The poster is The poster is
exceptionally
attractive in acceptably messy or very
attractive in
Attractiveness terms of attractive poorly
terms of
design, layout though it may designed. It is
design, layout,
and neatness. be a bit messy. not attractive.
and neatness.
10
VIDEO PRESENTATION
10
RAP MUSIC
Criteria Excellent Good Fair
Accurate All information There are many You rap’s
was accurate in rap inaccuracies information was
very inaccurate
Detailed Your rap was very Your rap gives Your rap and visual
detailed. I felt like I some details about are too general, I
really knew your your person, but I could have made it
person and what felt it was lacking up just by guessing
he/she stood for some specifics about the person
and how they had
great ideas
Thorough Your rap and visual Your rap and visual Your rap and visual
covered all covered a few only covered one
essential beliefs major points about main idea.
and facts about your person
your person
Reflection
5. I enjoyed most on
10
References:
Bentillo, Eulalia. 2012 Physics, Science and Technology. Quezon City, Philippines. FEP
Printing Corporation.
Campo, Pia. et.al. 2016. Science Learners Module. Pasig City, Philippines: FEP Printing
Corporation.
https://www.google.com/search
www.physicsclassroom.com
https://www.qoura.com/search
https://www.google.com/search?q=high+school+rubrics+for+poster&tbm=isch&ved=2ahU
KEwib_Y_Rm-_pAhULvJQKHZARBusQ2-
https://www.google.com/search?q=high+school+rubrics+for+video+presentation&tbm=isch
&ved=2ahUKEwib_Y_Rm_pAhULvJQKHZARBusQ2-
https://www.google.com/search?q=high+school+rubrics+for+a+rap+song&tbm=isch&ved=
2ahUKEwjx3u6bzunpAhVD3pQKHWyNBqIQ2cCegQIABAA&oq=high+school+ru
brics+for+a+rap+song&gs_lcp=CgNpbWcQAzoCCAA6BggAEAgQHlDDthRYk-
YUYL_xFGgBcAB4AIAB
10
Answer Key
Activity 1
I. A B
Series Parallel
II. 1. No, because the flow of current is broken.
2. Yes. Because electrons or current follow different paths as they flow from negative
to positive terminal.
3. Yes. Because it does not affect the paths of the other appliances for current to flow.
4. No. Because all appliances connected in parallel operate with the same voltage source.
5. Parallel connection is preferred over series connection at home for reasons that all
appliances operate with the same voltage that is 220V and aside from that, if one of
the appliances will be damaged, the other appliances will still function. Unlike in
series connection, if one of the appliances will be damaged, the rest of the appliances
will no longer work or will no longer function.
Activity 3.
1. No. Because the flow of electrons or the flow of current is broken or cut.
2. If bulb c get busted, the rest of the circuit will no longer work.
3. No. Because in series connection, the voltage is shared in ratio to resistance. Hence,
the bulbs become dimmer.
4. If the stand fan is damaged, the entire circuit will not function anymore because the
path where current flows is disconnected.
5. No. The reason why homes aren’t connected in series is that, the voltage across each
appliance will be dropped and so, the last appliance will not get sufficient voltage to
drive current and if that happens, some of the appliances will not function well. Aside
from that, once you switched off the light during daytime, none of the appliances will
11
work. Subsequently, if lights are switched on during night time, the rest of the
appliances will also work and so, unnecessary energy is consumed.
Activity 4.
1. The main switch is connected in series with the rest of the loads or appliances at home.
2. Appliances like television, refrigerator, electric fans, electric pot, light bulbs and other
electrical appliances are connected in parallel.
3. No. Because the path for current to flow has been disconnected.
4. Yes. Because current can still flow or travel along a different path.
5.
Series Connection Parallel Connection
Advantages Current flows through every All loads or appliances
component in the circuit. It is connected in the circuit gets
useful when you need to equal amount of voltage; it does
maintain a constant current not affect the entire circuit even
through each component if one of the loads is being
example in Christmas lights damaged and that current can
still pass through the circuit.
Disadvantages If you are going to add more It requires a lot of wires in
output devices, the slower the connecting each appliance.
current becomes and once the There could be a risk of fire in
circuit is broken, the entire some cases and increasing the
circuit will no longer function number of output devices does
not increase the resistance.
Prepared by:
DIANA D. LACAMBRA
Cataggaman National High School
11
SCIENCE 8
Name of Learner: Grade Level:
Section: Date:
11
3. Three-pronged plug. The two flat prongs connect the appliance
to the household circuit. This third prong, which is round,
connects the metal shell of an appliance to the ground wire of a
building. It serves as a ground conductor in order to protect
people from electrocution.
Plug with third prong
lightning rod
11
Activity 1. Let’s Make Connection!
Directions: Match the devices in Column B and their respective functions in Column C with
the given pictures of items in Column A. Write your Coded answer in the space provided.
The first one is done for you.
Column A Column B Column C Column D
Coded answer
Picture Device name Function
1. A. Circuit I. Connects the metal shell of 1. C, II
Breaker an appliance to the ground
wire of a building
11
Activity 2. Can You Be My Partner?
Directions: Fill in the Venn diagram comparing circuit breaker and a fuse by transferring the
sentences below into their appropriate places.
2. 1. 2.
2.
11
Activity 3. Fact or Bluff?
Directions: Write FACT if the statement is correct and write BLUFF if the statement is
wrong and give the correct term in the underlined word to correct the statement. Write your
answer on the space provided.
1. The human body can be seriously injured by shocks, even those of less than one
ampere.
2. Wearing of rubber shoes or slippers when repairing electric appliances is one of the
safety measures in handling electricity.
3. Always plug an electrical appliance before attempting to open or repair it.
7. Don’t ignore switches or outlets that don’t work. Have a qualified electrician check
the outlets.
8. Don’t use old extension cords without inspecting them first.
9. Don’t switch on electric appliances with wet hands.
10. Pull on the plug, not on the cord to disconnect electrical appliance from the outlet.
11
4. Why does connecting too many electrical appliances at the same time in one
extension wire with low quality often” blow “ or “burn” a fuse?
Reflection:
1. I learned that
2. I enjoyed most on
Campo, Pia C., et. al. 2003. Science – Grade 8. Learner’s Module. Pasig City. Department
of Education.
Holt, Rinehart and Winston, Holt. 2001.Science and Technology, Physical Science. Austin,
Texas. A Harcourt Classroom Education Company. Austin, Texas.
Padilla, Michael J.et. al. 2001. Focus on Physical Science. Prentice Hall. New Jersey
Glenview, Illinois,
https://www.gcsescience.com/pe38.htm
https://www.thespruce.com/six-ways-of-prevent
11
Answer Key:
Activity 1.
11
1. C, II
2. E, III
3. B, V
4. A, IV
5. F, I
6. D, VI
Activity 2.
Activity 3.
1. Fact 6. Bluff, Never
2. Fact 7. Fact
3. Bluff , Unplug 8. Fact
4. Fact 9. Fact
5. Fact 10. Fact
Activity 4.
1. Answers vary (fuse ,circuit breaker, ground conductor ,prong)
2. Possible answers
a. Do not “flip”the circuit breaker as ON and OFF switch
b. Do not replace the burn fuse without putting down the main switch.
c. Never use a coin or piece of metal to replace a burn fuse.
d. Do not use old extension wires without inspecting them first.
e. Check the extension cord load limit.
f. Have a qualified or licensed electrician inspect the circuit breaker, fuse,
switches that don’t work anymore.
g. Unplug electrical appliances when not in use.
3. The color of the metal wire is black. If a fuse burns out no current will flow and all
lights and fixtures along the circuit go dead. It has to be replaced with new one.
4. If too many appliances are connected in a single extension cord this is overloading.
Overloading occurs when an electrical wires carries too much current. This may cause
the fuse wire to melt or burn because it exceeds the maximum current the household
wire can handle.
Prepared by:
VICTORIA T. IRINGAN
Cagayan National High School