Professional Documents
Culture Documents
NS Xp600 Printer System Comprehensive User Manual: DC Motor Version
NS Xp600 Printer System Comprehensive User Manual: DC Motor Version
from Chinese (Simplified) to English ‑ www.onlinedoctranslator.com
WellPrint
NSⅡXp600 Printer System Comprehensive User Manual
DC motor version
Shenzhen Weiliyin Technology Co., Ltd.
Shenzhen WellPrint Tech Co.,Ltd.
NS 1 Page/Total 28 Page
WellPrint
Preface
Thank you for purchasing and using the products of Shenzhen Weiliyin. In order to let you use the products better,
please read this user manual carefully before use. If you have any questions during the use of the product, please feel free
to contact us by phone or email.
Our contact information:
Address: 4th Floor, Building 2, Tengluo Science and Technology Park, Tangtou Science and Technology Road, Shiyan, Shenzhen
Phone: 0755‑23444472
URL:http://www.wlyprint.com
NS 2 Page/Total 28 Page
WellPrint
contents
one. Board description......................................... .................................................. .................................................. ......4
1.Board interface and instructions for use............................ .................................................. ........................................ 4
2, The original image of the button panel and PCB view................................................. .................................................. ........................ 7
2. Nozzle ink sequence arrangement............................................ .................................................. ................................................ 9
1.xp600 Nozzle color order.................................. .................................................. ................................... 9
2 . Software color table ink sequence............................................ .................................................. ............................................. 9
3. Supported accuracy andPASS number................................................. .................................................. .............................. 9
3. Software description.............................. .................................................. .................................................. ..... 10
1, The main interface of the software ... .................................................. ................................................. 10
2、Software debugging steps.................. .................................................. ............................................. 11
3、Loading the print file.................................. .................................................. .............................................. 16
4、Software function......................................... .................................................. .................................................. .. 18
Four, common fault handling................................... .................................................. ................................................ 26
1, No action when booting.................................... .................................................. ................................................. 26
2, Boot X The motor only moves in one direction............................................ .................................................. ................... 26
3、The software is not online.................................... .................................................. ................................................ 26
4, After the software is online, the cart keeps moving to the left (drawing ink stack type machines are easy to appear)............................... .............................. 27
5, No‑flash spray nozzle............................................ .................................................. .................................................. 27
6, Can't print the status diagram.................. .................................................. .......................................... 27
7, The status diagram of the print head is missing............................. .................................................. ........................................... 27
8, The print head status diagram is spraying randomly........................................... .................................................. .................................... 28
9, Drawing drawing.............................................. .................................................. .................................................. ... 28
10, Drawing the depth of the picture, revealing the white... .................................................. ............................ 28
11, Read 1PASS Data error, the amount of written data is not equal, the setting of the micro‑spraying state is wrong.......................... .................... 28
NS 3 Page/Total 28 Page
WellPrint
one. Board description
1.Board interface and instructions for use
Y Stepper motor drive interface about UV Light interface
Power connector
Pul+, Pul‑, DIR+, DIR, 5V, GND Y 24v Limit interface
GND,42V,GND,24VGND,42V,24V
Y Shaft motor interface
BP, BM, AM, AP
Wiper motor interface Mozhan motor interface
AM, AP, BM, BP AM, AP, BM, BP
X Shaft DC motor
interface DC+,DC‑
Mozhan limit interface
GND, DWON (NC), PWR (5V) Flat line communication interface
P2,P3,P4
run
old
change
31PIN
Paper test signal port
Scraper limit interface
Control panel interface Grating interface
GND, HB(NC), PWR(5V)
GND, M(NC), PWR(5V) different
noodle
flat
flat
String
Flat line communication interface 31PIN Different sideFlat wire
P2,P3,P4
Grating interface
GND, 5V, AX, BX
Left limit interface
Anti‑collision port
GND, L, PWR (5V)
Left LEFT Left limit interface L
Right limit interface R
XP600Nozzle cable interface
Right limit interface
right RIGHT GND, R, PWR (5V)
Two interface modes of left and right limit are optional, and the two interface indicators are shared
NS 4 Page/Total 28 Page
WellPrint
1.1 Board size chart
1.1.1 Spray car board W802HDB_VA Dimensions
1.1.2 Main control board W802TDB3_VB Dimensions
NS 5 Page/Total 28 Page
WellPrint
1.1.3 The initialization process of lifting ink cup,led Indicator light (here with X For example, the initialization action of the lifting type ink cup of the shaft DC motor)
1 ======Motor motor1 Scraper back to the origin to find the limit
2=====Motor motor0 The ink cup descends to find the lower limit (check whether the lower limit is abnormal, the limit is normally closed, the car does not move with the anti‑scratch function)
1======The ink cup rises a certain distance to seal the nozzle. This distance can be set
2======Motor motor0 Mozhan descends to find the lower limit
3======Motor XDCmotor Move a certain distance in the opposite direction to the origin, the distance can be set
4======Motor XDCmotor Move to the origin, find the limit (the DC motor will stop if there is no limit)
5===Motor XDCmotor After finding the limit, move to the opposite direction of the origin for a certain distance, this distance can be set, align the ink cup, and determine the origin
5======Motor motor0, The ink cup rises a certain distance to seal the nozzle, this distance can be set
P======Initialization completed
Notice:
1. The initialization action of the ink cup does not have the part of the ink cup. The value can be ignored. The wiper depends on its type. The fixed wiper and solenoid valve wiper can be
ignored for non‑motor types.
2. Y Axis selectable drive interface (external drive) can also be selected Y Shaft motor interface (built‑in drive).
3. Please use the corresponding software parameters and start‑up to initialize the action parameters
1.1.4W802TDB3_VB Motherboard precautions
1, The board power supply is 24V, 42VTwo groups of power supplies, the current is guaranteed to be in 5 A above. Power module220V It is recommended to add a secondary filter
to the input.
2, The board must be reliably grounded during use, the board fixing screw should be in full contact with the chassis, and the chassis must be connected to the buried ground wire.
The middle hole of the power socket of the equipment must also be reliably grounded.
3、The equipment requires the ambient temperature: 15℃‑30℃; the normal temperature range value of the board and card: 0℃‑45℃
4. Ensure the air circulation around the board where the main board is installed to prevent the high temperature around the board from affecting the printing effect or damaging the board. The floor should be easy to
clean without generating dust and static electricity
NS 6 Page/Total 28 Page
WellPrint
2, The original image of the button panel and PCBview
2.1 Keypad function description
Offline X and Y manually move, set white margins, perform nozzle detection and vertical calibration, perform cleaning and ink extraction actions, set origin fine‑tuning, cart return to warehouse, switch
between Chinese and English, set backlight and other functions;
Online X, Y manual movement, set white margin, X reset, nozzle detection, perform cleaning and ink pumping actions.
2.2 Key Function
UP: Return material; the menu option moves up.
DOWN: Feeding; the menu option moves down.
LEFT: X moves to the left; the brightness of the backlight increases.
RIHT: X moves to the right; the brightness of the backlight decreases.
EXIT: Return to the previous menu, and return to the origin in the main online interface.
ENTER: Enter the next level menu; execute the actions in the menu; execute the commands in the lower right corner of the interface; save in the offline "state diagram position"; save the white
border under the online main interface.
NS 7 Page/Total 28 Page
WellPrint
2.3 Menu structure in offline and online Chinese and English mode
Note: Use the corresponding software parameters to download the offline cleaning parameters
NS 8 Page/Total 28 Page
WellPrint
2. Nozzle ink sequence arrangement
1.xp600 Nozzle color order
K Y C M C M
From left to right as shown in the picture KYCMCM, The corresponding in the software color table should be KYCMCM,As shown below. This is a case column. If you change the ink sequence at will, you need to
modify the color register in the software to correspond to it, and the two adjacent columns cannot be of the same color.
2 . Software color table ink sequence
3. Supported accuracy andPASSnumber
Four‑color printing change point: use software ink dots 2, The number of ink dots in the picture 2Bit
360 X 360 1PASS 720 X 360 2Pass
360 X 720 2PASS 720 X 720 4PASS
360 X 1080 3PASS 720 X 1080 6PASS
360 X 1440 4Pass 720 X 1440 8PASS
NS 9 Page/Total 28 Page
WellPrint
Three, software description
1, The main interface of the software
After the board is initialized, connect the board to the computer through the USB data cable, plug in the dongle, and open the software, the printer status in the lower left corner will
display high, as shown in the figure below
NS 10 Page/Total 28 Page
WellPrint
2, Software debugging steps
2.1, Calibration level speed and ruler wheel ratio
Click System Maintenance, Sports Settings,
You will see the interface as shown on the right, first in
Fill in a smaller value after moving
(100), click to move, at this time, soft
The position of the trolley will be displayed in the lower left corner of the item, (like
If the display is negative, the raster decoder is extremely
The sex is reversed, swap the raster decoder A and B
Line sequence, just restart the machine). Click to re
Bit. (This step determines the grating polarity)
If you need to change the corresponding speed, you can choose to
Should be the speed, and edit in the corresponding speed
Enter the speed value you want to modify in the field, and then
Just click on calibration. If it exceeds the motor frequency
Rate, the software will prompt as shown below, re‑enter
Enter a relatively small value and calibrate again.
Mark the material first, and then
Fill in 100 after moving, click to move, material
Mark again after the material movement is completed, and measure with a ruler
Out of the actual moving distance, fill in the cloth travel length box
, Click Calculate (Note that you can only click
One‑click calculation).
The second time, fill in 300, click to move,
Measure the actual length of the cloth, click to calculate
For the third time, fill in 600, click to move,
Measure the actual length of the cloth, click to calculate
Note: After the gear ratio is calibrated, you need to click the Apply button at the bottom of the interface to save the parameters
NS 11 Page/Total 28 Page
WellPrint
2.2, Cleaning settings
Ink loading function
The number of flashing starts and stops is at least 1
If it is a fixed scraper, please set all here 0
Cleaning steps:
1, The ink pad descends to the lower limit (the pulse of the platform descending)
2. The ink pad rises to absorb ink against the nozzle (the pulse of the platform to absorb ink)
3. The ink pump starts pumping ink (the pumping time can be set by the tool) 4. After pumping the ink, wait for a certain period of time, and the air pressure in the ink pad is equalized to
prevent ink from sucking back (tool setting, time guaranteed for more than 3 seconds) 5. Ink pad Descending to the lower limit (pulse control of platform descending)
6. The ink pump pumps out the waste ink in the ink pad
7. The trolley moves to the left to the initial ink scraping position (the trolley goes to the scraping blade 1 pulse) 8.
The platform rises to the ink scraping height (the pulse of the platform scraping ink)
This "download DC "Cleaning parameters" mainly download the button board (the above board
9. Remove the wiper to the nozzle position, ready to wipe the ink (pulse when the wiper 1 comes out)
Explain the description of the key board) the entire cleaning process (motor movement speed and stroke)
10. The cart moves to scrape the ink (1 pulse of the cart to scrape the ink) 11. required in the offline operation process, the speed of forward and backward movement of the material, the
The ink pad drops to the lower limit (the pulse of the platform descending) speed of offline printing,x/y The software has calibrated parameters such as shaft gear ratio.
12. Scraper reset (pulse when returning to
When the software actions, especially the cleaning, are in line with the actual debugging of the
Scraper 1) 13. Car reset equipment, connect the key board, and the offline key board displays the online interface. At this point, just
14. The ink pad rises to the flash jet position (the pulse of the platform flash jet) click to download the motor parameters, and the corresponding download is successful.
15, the nozzle starts to flash
Once you set it up, if the software parameters are not changed significantly, you generally don't need to download
16. The ink pump starts to pump waste ink in the ink pad
it again. During the download process, the keypad must be connected and the online status must be displayed.
17. Ink pad descends to the lower limit (pulse of platform descending)
18, The ink pad rises to the standby height (the pulse of the platform rise)
NS 12 Page/Total 28 Page
WellPrint
2.3, Print head status diagram
On the main interface of the software, click Print Status Chart
The print head status diagram is as shown in the figure below:
2.4, The vertical state of the print head
In the main interface of the software, set the parameter basic settings, calibrate operation, click "print calibration chart" in the vertical calibration
When the print head vertical state diagram is as shown in the figure below:
The vertical state as shown in the figure is obviously wrong, and the nozzle needs to be adjusted. The situation shown in the figure above should be the nozzle "
Push left","Pull right back"Make adjustments
When the print head vertical state diagram is as shown in the figure below:
NS 13 Page/Total 28 Page
WellPrint
The vertical state as shown in the figure is obviously wrong, and the nozzle needs to be adjusted. The situation shown in the figure above should be the nozzle "Pull
left","Push right forward"Make adjustments
The vertical state of the print head is not considered to be adjusted until it is adjusted as shown in the figure below:
2.5, Print step calibration chart
In the main interface of the software, in the basic settings of the setting parameters, during the calibration operation, select to print the calibration chart
Step Select the basic step, click to print the calibration chart, and the car will start drawing:
As shown in the figure above, overlap at the position of ‑6, which proves that the basic step has an error of ‑6. You need to adjust the window to input ‑6, click Apply at the bottom of the interface
NS 14 Page/Total 28 Page
WellPrint
Click again to print the calibration chart, as shown below:
exist 0The position overlaps to prove that the reference step has been adjusted well, if it is not there yet 0Point positions overlap, continue to adjust the parameters, continue to print,
until you can 0 The locations overlap.
Step selection drop‑down menu, you can choose different PASS You can select and print the calibration chart after you choose to calibrate separately
2.6, Print two‑way calibration chart
In the main interface of the software, in the basic settings of the setting parameters, during the calibration operation, select to print the calibration chart
First, you need to select the corresponding accuracy, the default is 360 Accuracy, select the corresponding speed, the two‑way value of low, medium and high speed need to be adjusted, click to print
the calibration chart (low, medium and high all need to be calibrated, here is medium speed printing as an example)
NS 15 Page/Total 28 Page
WellPrint
The picture above is‑6 The position is aligned up and down, indicating that the two‑way deviation in the case of medium speed‑6, Need to add – 6, Click Apply under the
software
Click to print the calibration chart:
When 0 When the positions are aligned, it proves that the two‑way value adjustment is completed.
Two‑way calibration accuracy selection instructions:720X720 4PASS The corresponding two‑way calibration is 360 Accuracy, choose to hit 8
PASS When, the corresponding is 180 Accuracy 720X1080 6PASS 360 Two‑way precision,12PASS ,180 Two‑way 720X1440 8PASS 360Accuracy,
16PASS 180Precision
3, Load print file
There are two options for loading the print file. The first one is to click the open file interface in the main menu bar and find it according to the path RIP OK PRN File,
double click after selected or click below to open
NS 16 Page/Total 28 Page
WellPrint
The second kind, RIP The software prints directly. Set the port,127.0.0.1
When you double‑click the task you want to print, the task properties box will pop up, as shown in the figure below:
Task attributes:
You can choose to repeat printing. When repeat printing is checked, each time the printing is completed, the front of the car will be reset, and the same white border starting position will start to print the same
after the original PRN Task.
Multi‑frame settings, you can set the number of horizontal and vertical frames, the interval can be set in the middle, and the unit of the interval is mm Mm
Area printing, you can manually select a part of the file to print, when area printing, repeat printing, and multiple settings are invalid
Ink volume statistics: Indicates the current PRN The amount of ink required for the document
NS 17 Page/Total 28 Page
WellPrint
Click the ink volume control under the task properties, and the interface as shown in the figure below will appear:
Hook the ink volume control, you can control the current PRN The amount of each ink in the document is adjusted,
Note: After the ink volume is intercepted, the output image accuracy will be reduced, and the dots will become thicker. Generally, it is not recommended to adjust the ink volume here
When you click the OK button at the bottom of the properties, the task is imported and you can click Print at the top of the software to start printing. At the same time, the software interface will display the current
PRN The file information of the task, such as the number of colors, area, etc., as shown below:
4, Software function
4.1, Title menu bar
NS 18 Page/Total 28 Page
WellPrint
Open file: Import RIP OK PRN File printing setting parameters: basic mode is set for terminal customers to modify parameters;
advanced mode is set for manufacturers to modify parameters; stop: stop the current printing task
Pause: during printing process, printing is paused, and the carriage is reset, the button changes to continue at this time, click to continue, the task will continue to print
Start printing: when online and dongle is ready, when the task status is ready, click to start printing
Flash spray: turn on or off the nozzle standby flash spray
Print calibration chart: print head status chart
Cleaning: When the nozzle is in poor condition, clean the nozzle
Head back to zero: When the head of the car is not at the origin, right click to reset the car directly and return to the origin.
Move left: the car moves to the left
Move right: get off the car and move right
Return material: material moves backward
Feeding: the material moves forward
Note: Only the parameters that need to be used are explained
4.2, Print control interface
White border settings: current PRN document XThe starting printing position of the direction. You can move the cart to the position where you actually need to print by pressing the button
Set the button to set the current position as the starting printing position, and the white margin value on the interface will also change accordingly
Head speed: You can select high, medium, and low speeds, the specific speed is maintained in the system, and the motion setting interface is adjustable
Printing direction: You can choose one‑way left, one‑way right, and two‑way. When you choose two‑way printing, you must first debug the two‑way value
Eclosion range: Only the mist spray shape is checked B,You can choose weak, medium and strong feathering
NS 19 Page/Total 28 Page
WellPrint
Color bar printing:Check the color bar, the color bar is set in the parameter setting in detail
Interface, you can set the width of the color bar and the distance from the color bar to the printed picture
The color bars are only on the left, right, or both sides of the picture
Queue printing: When importing multiple PRN When task, check the queue to print, all tasks will be printed consecutively
4.3, System setting interface
4.3.1,parameter settings
Edge feathering: By default, you only need to hook the edge feathering. The type is generally fog spray. The amplitude is adjusted according to the actual situation. The larger the amplitude, the higher the speed.
The slower, the better the effect. Spray shapeB The feathering is turned on when printing color blocks or when the nozzle is in poor condition. If you turn on the enhanced
feathering, the printing effect will be improved a lot. You can actually debug according to the printing effect.
Color bar settings: Set the width of the color bar, distance from the picture, position, left, right, or both sides
Automatic cleaning: After checking, click OK to start automatic cleaning.
For example, as shown in the screenshot: Trolley printing 10PASS After returning to the origin, the flash spray cleaning is fast, and the frequency of the flash spray is 512
NS 20 Page/Total 28 Page
WellPrint
Flash spray settings: Check the flashing of the standby time interval
Spray frequency, generally set 4‑16, flash spray
Self‑set time greater than 1000ms
Other settings:
Feeding speed refers to YPaper speed
The value is set in the system maintenance motion parameter setting.
Set.
current PRN After printing, the material moves forward
distance
Automatically adjust white, it will be in X,Y Direction skip empty
White area, only print where there is a picture,(When checked
Color bar, white jump function is invalid)
NS twenty one Page/Total 28 Page
WellPrint
4.3.2, Operation calibration
The operation calibration steps are the same as the above debugging steps
Step calibration: Choose commonly used
PASS Count, print the calibration chart separately,
See if the stepping is correct
Two‑way calibration: need to correct before printing 180 Accuracy,360 Accuracy, low, medium, and high‑speed calibration diagrams are printed separately. In the debugging instructions, the two‑way
The calibration chart has detailed instructions.
UV Lamp parameter setting
Take the right origin as an example,UVThe place where the light starts to light is the minimum range offset value, and
the place where the light is off is the maximum range offset value. The right origin is the most
The small range maximum range debugging value follows the "left plus right minus" to the left
Just add, if you want to go to the right, just subtract, the left origin is the opposite.
NS twenty two Page/Total 28 Page
WellPrint
4.3.3, Sports settings
X Click to set (car direction): Display the current printing control interface low, medium, high, carriage return, reset and other speeds. You can also check whether the raster value is accurate
by moving the corresponding value. If you need to modify the corresponding speed, you need to enter the "advanced mode" to calibrate, see the above software debugging steps for details.
【DCXThe shaft does not need to calibrate the gear ratio, just need to calibrate the lower speed when changing the speed]
Reset speed: When you click the head of the software title menu to return to zero, the movement speed of the trolley
One‑way carriage return speed:When printing in one direction, the speed of the carriage return movement
Move, reset:xThe shaft DC motor is only used to see if the grating value is correct, which is introduced in the debugging steps
Feeding motor setting (Y direction):
The speed of the feeding motor is divided into low, medium and high speed. The value corresponding to the feeding speed in the other settings of the parameter setting interface is set here,Y The faster the speed, the
smoother the printing process looks, but the specific speed needs to be actually adjusted to determine the value under the premise of ensuring that the motor does not lose steps.
Mobile, computing:calibration Y It is used for the directional gear ratio, which is explained in detail in the debugging steps.
Note: After the current interface parameters are modified, you need to click the apply button below, otherwise the modified parameters will be invalid
NS twenty three Page/Total 28 Page
WellPrint
4.4, Advanced settings: initial login password wly1102, Can be modified through the main menu "modify advanced password" in the lower left corner of the software main interface
Basic value of step calibration: Double‑head double‑color default value 360 . The value here generally does not need to be modified, and the software shall prevail.
Start printing offset position: X Direction offset value, generally fill in a value here to make the white margin value of the print interface 0Time, just at the edge of the material.YThe direction
offset value has the same meaning.
Acceleration and deceleration distance: The distance from standstill to the acceleration and deceleration of the carriage at the printing speed. The larger the value, the smoother the carriage. The smaller the value, the faster the motor reverses,
The faster the overall speed, but the motor will jitter, and an appropriate value needs to be actually debugged. Y Because the distance of each step is short, the acceleration
and deceleration distance is generally set very small. 3‑‑8 between.
Ink point selection: default selection singleDot2(The number of ink dots in the sharpened picture is 2 Bit)
Offset voltage: Can be a certain range (‑6 To +6) Adjust the jetting force. The current ink dot can be increased or decreased by changing the waveform voltage. After filling in
the value, you need to click the setting. At this time, the software may freeze because the software is writing to the board. The offset voltage value can be restored after a
while, and the modified offset voltage value will take effect at this time.
NS twenty four Page/Total 28 Page
WellPrint
Color channel selection: When the ink sequence of the channel ink sequence corresponds to the flash and ink sequence of the nozzle, the ink sequence needs to be changed in sequence.
Note: After the parameters are modified, you need to click the Apply button below to save the parameters, otherwise the parameters will not take effect
4.5, System menu
Read hardware flash parameters: read the software parameters in the board (the board needs to have
written and saved software parameters)
Write parameters to the hardware flash: write and save the current software parameters to the board,
next time you need to use "read hardware flash parameters" to read and use
Switch language: switch software system language and keypad online language, offline language
Modify advanced settings password: reset advanced password
Dongle management, when using installment dongle, you need to write a password before you can continue to use it after
expiration
about WellprintExp, It will display the firmware and logic version number of the current board. It can only be used when the software is normally connected to the board, as follows
4.6, Software other information display bar
The connection status of the printer is currently disconnected, and the connection is high after the normal connection.
Current flash spray status, on or off
When the car is moving, the real‑time position of getting off the car
NS 25 Page/Total 28 Page
WellPrint
Four, common fault handling
1, No action when booting
(1) There is a problem with the data line connection, check the data line sequence,P2,P3, P4Whether it corresponds.
(2), check whether the motor signal wire is connected correctly and the wire sequence is correct,X,Y Whether the motor signal wire is connected reversely
(3), check whether the motor driver is normal
(4), confirm whether the boot action settings are correct, and re‑import the parameters or firmware
(5), check the board power supply, observe D71,D72,D46,D49Whether the indicator light is on=>
2, Boot XThe motor only moves in one direction
(1), there is a problem with the motor signal line, only connect 3There is a short circuit between the data line and the line,
Signal line is blocked, etc.
(2), the sensor is broken, manually block the sensor to confirm whether the limit sensor is normal
(3). The limit polarity of the board's power‑on action setting does not correspond to the actual polarity. (At this time, it can be judged by manually
blocking the sensor. If the sensor is blocked, the polarity must be reversed)
(4), electrical drive failure, replace the drive
3, The software is not online
(1), confirm whether the boot action is completed, the board D30 Indicator second flashing watch
Indicates that the boot action is complete
(2), check whether the computer recognizes the board card driver, if not, you need to re‑install
Install the driver
(3), whether the computer is plugged in the dongle, whether the upper left corner of the software shows undetected
To the dongle, re‑plug the dongle
(4), the software version does not correspond, the software USB Type setting does not correspond
NS 26 Page/Total 28 Page
WellPrint
4, After the software is online, the cart keeps moving to the left (the ink stack type machine is easy to appear)
(1), the software cannot read the raster value, and the position of the trolley in the lower left corner of the software is always displayed 0, Check whether the raster decoder is normal and whether there is a problem with the
line connection
(2), the software reads the grating value reversely, the position of the trolley in the lower left corner always shows a negative number, change the grating polarity, or change the grating decoder
A,BLine order
(3), the machine origin direction is set incorrectly
5, No flashing nozzle
(1), board logic, software version, nozzle type does not correspond
(2), check whether the nozzle cable is plugged in,31PI Whether the data cable is plugged in correctly
(3), the board is damaged, change the board to test,
(4), change the nozzle test
(5), the software flash spray area setting is wrong
6, Can't print the status diagram
(1), print the status diagram without action, in the software PRN The file is wrong, contact Veoliyin technical support to solve it
(2), software prompt 1 PASS The data is abnormal, and the software version does not correspond to the board
(3),hint Y DPI Too small, the software configuration file does not correspond, the state diagram and the software settings are not correct, usually single and double heads, the nozzle type does
not correspond, etc.
(4), the software prompts data interleaving error, the number of white ink channels set by the software is incorrect; the second decryption software version is incorrect.
7, The nozzle status diagram is missing
(1), check whether the print head cable is plugged in, and re‑plug the print head data line
(2), software system maintenance, basic setting interface, whether the channel is closed
(3), check the software ink sequence, whether it is installed in accordance with the instructions in this manual, especially the seventh‑generation nozzle, to ensure that the ink sequence flashed out, the two
adjacent columns are the same color
(4), draw more ink, check whether the nozzle does not draw out the ink, wash the nozzle with the cleaning fluid, and confirm whether the nozzle is clogged
NS 27 Page/Total 28 Page
WellPrint
8, The print head status diagram is spraying randomly
(1), check whether the software, board card, and nozzle type correspond to
(2), reinsert the print head cable, check it 31pi Long data cable, whether it is plugged in, whether it is skewed
(3), replace a small nozzle plate, try to replace the nozzle cable
(4), replace the nozzle test
9Tulasi
(1). There are many missing needles in the nozzle. Clean the nozzle to ensure the largest possible number of missing needles in the nozzle.
(2), play more PASS,PASS The more the number, the greater the feathering, and the effect will be improved
(3), turn on the enhanced feathering, it will improve the wire drawing phenomenon, and the speed will be reduced to a certain extent
10, Draw the picture depth and shallow way, reveal the white
(1), check whether the nozzle installation is level with the platform,
(2), step, vertical, two‑way calibration is good
(3), turn on enhanced feathering, the effect will be significantly improved
11, Read 1PASSData error, the amount of written data is not equal, the setting of the micro‑jet state is wrong
(1),USB There is a problem with the interface or data line, please change the data line or replace the computer interface to try
(2),31pi There is a problem with the long data cable, replug it, or replace it
(3), the printing speed of the trolley exceeds the printing frequency of the nozzle, and the printing speed is reduced
(4), replace the board to test
NS 28 Page/Total 28 Page