Professional Documents
Culture Documents
Inspection & Testing Requirements Scope:: Test and Inspection Per
Inspection & Testing Requirements Scope:: Test and Inspection Per
TEST AND INSPECTION PER: 32-SAMSS-004 & ASME Section VIII, and Specifications As Noted Below.
0020 R X Raw Material Test Certificates, identification and traceability All material per scope of 32-SAMSS-004(See note 3).The steel
including Plates. plate for(HIC resistance/Cladded plates, as applicable shall be
procured from SaudiAramco latest approved steel mills list.
0022 R X Pressure retaining parts MTC’s Verification of sub-components shall be performed on material
and test certificates with original equipment approved
manufacturer (OEM).
0030 R X Welding Procedure Specifications , Procedure Qualification Per SAES-W-010 & ASME Sec. IX. Verify Company approval.
Records( WPS & PQR) and Weld Map Repair procedure as Per 32-SAMSS-004
0040 R Welders Qualification Records Shall be qualified per ASME section IX or equivalent.
Performance records shall show acceptable rejection rate level
0042 R Welding Inspector Qualification Shall be certified to AWS (CWI) or CSWIP3.1 or equivalent.
0044 R Coating Inspector Qualification Shall be certified to NACE or SSPC or equivalent. Inspectors
shall be skillful in Surface Preparation / Painting / Galvanizing
0050 R X NDT Procedures and Personnel Personnel Shall be certified in accordance with ASNT CP-189
as indicated in 32-SAMSS-004 Para 14.1.2 or Company
approved equivalent.
0060 R Data sheet & Detailed assembly Drawing Drawings as per applicable NMR
0070 R X PWHT, Hardness and PMI Procedures (If applicable) Verify Company approval (If required)
0020
0010
***
W R X
In process inspection & test requirement
PMI
Specification Details / Notes:
Per SAES-A-206 and SA-175 form 320300.
0030 R X Nondestructive Testing (NDT): MT, PT, RT, UT,TOFD and PA (As Per 32-SAMSS-004.
applicable)
IR321900 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 07/06/2017 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 04/27/2017 IR321900 2 of 3
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0050 R X Charpy Impact Testing Per 32-SAMSS-004.(if required)
0052 W R X Pre heating activities Per SAES-W-010 and approved WPS , for critical joint/material
0030
0010
***
H X
Final inspection & test requirements
Visual and Dimensional Inspection
Specification Details / Notes:
Per 32-SAMSS-004
0020 H R X Hydrostatic Test Per 32-SAMSS-004 . verify the cleanliness of all slag, scale,
dirt, grit, weld spatter, paint, oil, etc prior to the Hydro test
0050 W X Painting Shall be in accordance with the Data Sheet and SAPCS
attached to the Purchase Order. SAES-H-Series and SA-175
form 091900.
0060 W R X Nameplates and Stamping Vessels shall be ASME code stamped for all services in
accordance with the applicable code.
0070 W X Preparation for Shipment,Internal and external protection Per 32-SAMSS-004 and Purchase Order requirements.
0090 R X Product Test Certificate and records As per applicable SAMSS and IR
IR321900 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 07/06/2017 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 04/27/2017 IR321900 3 of 3
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0100 W Pre-Release Inspection Complete / Fill SAIC D-2002 & D-2003 (Optional for vendor &
contractor )
Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.
(2)Shall be in accordance with 32-SAMSS-004 Witnessing pneumatic testing shall be for all weld attachments with telltale holes. Witness percentage
shall be selected by inspector.
(3) HIC materials per 01-SAMSS-16/NACE MR0175/ISO 15156 as applicable.
End of IR321900