Professional Documents
Culture Documents
ATT-CEM-19006-OEM Radio Mounting Bracket Standard v1
ATT-CEM-19006-OEM Radio Mounting Bracket Standard v1
(Standard)
Originated By: DOCUMENT # VERSION: ISSUE DATE:
Date: 8/28/2019
Revision History:
Rev. 1 – 08/28/2019 – Initial Release: Alternate brackets for Ericsson 44xx and 88xx radios.
Audience:
• AT&T Market Equipment Engineers, AT&T Quality Inspection personnel, Implementation Project
Managers, Turf Construction personnel
Overview:
The Rosenberger Double RRU Mount (D215RRU) and Universal Remote Radio Head Dual Swivel-Mount
(D218RRUDSM) are being phased and will not be available for inclusion on OOMs after 15-September-2019. Any
purchase of the outgoing product should be added to the OOM prior to the phase date to avoid having obsolete
inventory.
Replacing these products, the Rosenberger Universal Low-PIM RRU Mount (D210RRU) and the Universal
Remote Radio Head Dual Swivel-Mount (D220RRUDSM) have been approved for use on Ericsson RRUs, as
substitutes for Ericsson Dual BTB Mast Bracket (SXK1250461/1).
The application for these mounts is the Ericsson remote radio heads having model numbers 44xx and 88xx.
Page 1 of 2
AT&T C&E Mobility Program Office
Mount Transition
Rationale
The new Rosenberger brackets have improved PIM characteristics relative to the older brackets, and they have a 4-
week delivery.
Although the Ericsson SXK1250461/1 brackets may be used, they have a known problem with bolts becoming loose
under vibration. When installing, AT&T requires that Loctite 243 (blue) medium-strength thread-lock adhesive be
applied to the threads. In order for this solution to be valid, a close-up photograph of the sealed threads must be
taken, and the adhesive must be visible.
Page 2 of 2