Professional Documents
Culture Documents
K6 6 Cavities Blowing Machine QUOTATION
K6 6 Cavities Blowing Machine QUOTATION
, Ltd
张家港羽成机械有限公司
Bottle Specifications:
Bottle
Bottle Material Bottle Volume (ml) Preform Weight Neck Size
Shape
The adjustment of the bottle type requires the customer to purchase replacement
Bottle type parts separately;
Adjustable If there are special requirements from customers,need confirm with Technical
Specifications Department of Eceng;
Customer Bottle
type
confirmation
Other
Requirements
2、Technical Parameters
Model K6
Cavity 6
Max.volume 200ml-2000ml
Bottle type specification Bottle mouth maximum overall
25-29mm NECK
diameter
Bottle biggest diameter 100mm
Bottle maximum height 330mm
Theory output 9000-10000BPH
Capacity specification Bottle type volume 500ML
Bottle type weight 13.5g
Bottle type Round
Light tube quantity 32pcs
Light tube power 1.25KW
Power specification Maximum heating power 40KW
All electric machine installation 49KW
Actual consumption 30%--60%
Work pressure 5-6kg/cm2
Air pressure specification Blow bottle pressure 25-45kg/cm2
Higher -pressure gas
8000Ltr/min
consumption
Air pressure specification Work pressure 5-6 kg/cm2
Temperature range 10℃
Consumption 8000kcal/hr
Name Brand
PLC controller Delta TAIWAN
Touch screen Delta TAIWAN
Clamping servo Delta TAIWAN
Stretch servo Delta TAIWAN
Range servo Delta TAIWAN
Bottle out servo Delta TAIWAN
Main chain servo Delta TAIWAN
Cylinder FESTO Germany
Magnet valve FESTO Germany
Photoelectric switch OMRON Japan
Proximity switch OMRON Japan
Contactor Schneider France
Switch power Schneider France
Sensor Sutonics Korea
4、Product Features:
K series linear bottle blowing machine is used in the production of PET water
bottles,hot filling bottles,carbonated beverage bottles and edible oil bottles.Eceng
Machinery K series linear bottle blowing machine stretches the preform by
controlling the stretching rod by servo motor. The advantage is that it can be stretched
in sections, firstly position the preform,ensure the verticality of the preform when
stretching then secondary stretching.Ensure uniformity and consistency of stretch of
each preform. At the same time, the blower is faster and less energy consumed.
6、Component Display:
7、Auxiliary Equipment:
1, High pressure air compressor
Air compressor system,combined series
of high pressure air system for
use,convenient maintenance,easy
inspection and troubleshooting
3, Filter system
二、 Delivery Schedule:
二、Training Requirements:
Before shipment the buyer need send technician to seller’s factory doing training at
least 7 working days,the staff will be trained for no less than 7 working days after
equipment arrive,if there is a change of position,the new employee should go to the
seller’s factory to retrain and take up his post,the training time is not less than 7
working days,during the training period,the buyer need cover board and lodging,the
buyer also is responsible for all the consequences of direct employment without
training.
三、Acceptance Methods
Before the equipment leaves the factory,the buyer will go to the supplier’s factory to
inspection,after acceptance then delivery.the buyer inspect whether the equipment is
damaged,lost and recorded during the transportation process,and negotiates with the
supplier for solutions in case of damage or loss.
5.2 During warranty period ,the equipment is damaged due to incorrect operation by
the buyer,we provide maintenance solutions,the buyer will cover the loss and
cost.during warranty period we provide technical service,which is usually solved by
telephone,etc.if not,provide door-to-door service.