Professional Documents
Culture Documents
Stenner Pump Company: Catalog
Stenner Pump Company: Catalog
2016
STENNER PUMP COMPANY CATALOG
PD E
IN BL
F
LY LA
ON VAI
A
2016
TABLE OF CONTENTS
PRODUCTS 2-37
Pumps 2-27
STENNER PUMP COMPANY CATALOG Classic Series 2-7
SVP 8-10
M128 11-13
Econ Stennicator 14-15
Econ Integrator™ 16-18
Econ FP 19-21
STENNER PUMP ADVANTAGES Econ T 22-24
Econ LD 25-26
Econ OEM 27
Self-priming against maximum Econ OEM Batch 27
working pressure
Meter Systems 13-21, 28-29
Can inject off-gassing solutions Proportional Injection System 28-29
Easy tube replacement without tools PCM 30-31
3 point roller design assists Water Meter 32-33
anti-siphoning Tank Systems 4-5, 13, 15, 18, 21, 24, 26, 34
Food grade pump tube Tanks 35
Mixer 36
Output reproducibility
Flow Switch 37
Output volume not affected by
back pressure PARTS 38-50
Solid one piece tube construction Classic Pump Parts 38-45, 48-49
Tube lubrication not required Pump Tubes 45, 47
Econ Pump Parts 46-49
No vapor lock or loss of prime
Check Valves, Injection Parts 48
Foot valve not required to prime
Miscellaneous Parts 49
Mixer Parts 50
Plastic Water Meter Parts 50
REFERENCE 51-54
Chemical Guide 51-52
Policies 53
Index 54
CLASSIC SERIES Electromechanical Pump
Quick Facts
45 SERIES
• Single Head Adjustable or Fixed output
• 0.2 to 22.0 gpd, pressures to 100 psi
Feed Rate • 0.2 to 50.0 gpd, pressures to 25 psi
Control
• 26 rpm
85 SERIES
Single Head Adjustable Single Head Fixed • Single Head Adjustable or Fixed output
• 0.3 to 40.0 gpd, pressures to 100 psi
• 0.3 to 85.0 gpd, pressures to 25 psi
• 44 rpm
Proportional
Injection System
100 SERIES
• Double Head Adjustable or Fixed output
• 0.3 to 20.0 gpd, pressures to 100 psi
• 0.3 to 100.0 gpd, pressures to 25 psi
Feed Rate • 26 rpm
Control
170 SERIES
• Double Head Adjustable or Fixed output
• 0.5 to 34.0 gpd, pressures to 100 psi
Double Head Adjustable Double Head Fixed • 0.5 to 170.0 gpd, pressures to 25 psi
• 44 rpm
2 www.stenner.com
Specifications
Output Control Adjustable model: External dial ring
Reproducibility ±2%
Maximum Working Pressure
25 psi (1.7 bar), 100 psi (6.9 bar)
Maximum Operating Temperature 125°F (52°C)
Weights and Dimensions Maximum Suction Lift
Single Head Adjustable Single Head Fixed 25 ft (7.6 m) vertical lift, based on water
Shipping Weight 9 lbs (4.1 kg) Shipping Weight 8 lbs (3.6 kg) Motor Type 1/30 HP, shaded pole, class B
Box Dimensions Box Dimensions Duty Cycle Continuous
13 x 8 x 9 in. (33 x 20 x 23 cm) 13 x 8 x 9 in. (33 x 20 x 23 cm) Motor Voltage (Amp Draw)
Product Dimensions Product Dimensions 120V 60Hz 1PH (1.7), 220V 60Hz 1PH (0.9),
230V 50Hz 1PH (0.9) INT'L,
250V 50Hz 1PH (0.9) INT'L
6.0" 6.0" Power Cord Type SJTOW
Power Cord Plug End
8.0" 120V 60Hz NEMA 5/15, 220V 60Hz NEMA 6/15,
230V 50Hz CEE 7/VII, 250V 50Hz CEE 7/VII
5.3" 10.6" 5.3"
Materials of Construction
All Housings Polycarbonate
Pump Tube & Check Valve Duckbill Santoprene®*,
Double Head Adjustable Double Head Fixed optional Versilon™**, FDA approved
Shipping Weight 10 lbs (4.5 kg) Shipping Weight 9 lbs (4.1 kg) CV Duckbill with Versilon™ ** Tube Pellathane®†
Box Dimensions Box Dimensions Pump Head Rollers HDPE
18 x 8 x 10 in. (45 x 20 x 25 cm) 18 x 8 x 10 in. (45 x 20 x 25 cm) Roller Bushings Oil impregnated sintered bronze
Product Dimensions Product Dimensions Suction/Discharge Tubing, Ferrules 1/4" & 6 mm
Polyethylene, FDA approved
Tube Fittings, Check Valve Fittings
6.0" 6.0" Gray fittings: Type 1 Rigid PVC, NSF listed
Black fittings: PP, NSF listed
Connecting Nuts PP or Type 1 Rigid PVC
5.3" 5.3" 3/8" Adapter Type 1 Rigid PVC, NSF listed
12.7" 10.2"
Suction Line Strainer PP or Type 1 Rigid PVC body
with Type 1 Rigid PVC cap, NSF listed; ceramic weight
All Fasteners Stainless steel
Pump Head Latches Polypropylene
Agency Listings
• Models (Santoprene® only) tested by Water Quality
Accessory Kit Shipped with Each Pump Association to conform to ANSI/NSF STD 61
• Adjustable models (Santoprene® only) tested by
3 connecting nuts 1/4" or 3/8" ETL to conform to ANSI/NSF STD 50
3 ferrules 1/4" or 6 mm EUROPE • Fixed output models (Santoprene® only) tested by
1 injection check valve 100 psi (6.9 bar) OR 1 injection fitting 25 psi (1.7 bar) ETL to conform to ANSI/NSF STD 50 only when
used with ANSI/NSF STD 50 listed controllers
1 weighted suction line strainer 1/4", 3/8" or 6 mm EUROPE
1 20' roll suction/discharge tubing 1/4" or 3/8", white or UV black
OR 6 mm white EUROPE
1 additional pump tube
2 additional latches
USE ONLY WITH ANSI/NSF 50
1 mounting bracket
LISTED CONTROLLERS
Performance Plastics.
† Pellathane® is a registered trademark of The Dow Company.
Single Head Adjustable Output 0-25 psi (0-1.7 bar) Approximate 20:1 turndown, 2.5% increments
Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters
Model
Prefix Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute
45M1 45MJL1 #1 0.2 to 3.0 0.8 to 11.4 0.01 to 0.13 0.03 to 0.48 0.02 to 0.27 0.56 to 7.92 0.6 to 9.1 0.02 to 0.38 0.31 to 6.32
45M2 45MJL2 #2 0.5 to 10.0 1.9 to 37.9 0.02 to 0.42 0.08 to 1.58 0.04 to 0.89 1.32 to 26.32 1.5 to 30.3 0.06 to 1.26 1.04 to 21.04
45 SERIES
45M3 45MJL3 #3 1.1 to 22.0 4.2 to 83.3 0.05 to 0.92 0.18 to 3.47 0.10 to 1.96 2.92 to 57.85 3.3 to 66.6 0.14 to 2.78 2.29 to 46.25
45M4 45MJL4 #4 1.7 to 35.0 6.4 to 132.5 0.07 to 1.46 0.27 to 5.52 0.15 to 3.11 4.44 to 92.01 5.1 to 106.0 0.21 to 4.42 3.54 to 73.61
45M5 45MJL5 #5 2.5 to 50.0 9.5 to 189.3 0.10 to 2.08 0.40 to 7.89 0.22 to 4.44 6.60 to 131.43 7.6 to 151.4 0.32 to 6.31 5.28 to 105.14
85M1 85MJL1 #1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13 0.9 to 15.1 0.04 to 0.63 0.52 to 10.49
85M2 85MJL2 #2 0.8 to 17.0 3.0 to 64.4 0.03 to 0.71 0.13 to 2.68 0.07 to 1.51 2.08 to 44.65 2.4 to 51.5 0.10 to 2.15 1.67 to 35.76
85 SERIES
85M3 85MJL3 #3 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.14 6.1 to 121.1 0.25 to 5.05 4.24 to 84.10
85M4 85MJL4 #4 3.0 to 60.0 11.4 to 227.1 0.13 to 2.5 0.48 to 9.46 0.27 to 5.33 7.92 to 157.71 9.1 to 181.7 0.38 to 7.57 6.32 to 126.18
85M5 85MJL5 #5 4.3 to 85.0 16.3 to 321.8 0.18 to 3.54 0.68 to 13.4 0.38 to 7.55 11.32 to 223.40 13.0 to 257.4 0.54 to 10.73 9.03 to 178.75
Approximate Output @ 60Hz Approximate Output @ 50Hz
Single Head Adjustable Output 26-100 psi (1.8-6.9 bar) Approximate 20:1 turndown, 2.5% increments
Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters
Model
Prefix Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute
45MHP2 45MJH1 #1 0.2 to 3.0 0.8 to 11.4 0.01 to 0.13 0.03 to 0.48 0.02 to 0.27 0.56 to 7.92 0.6 to 9.1 0.02 to 0.38 0.31 to 6.32
45 SERIES
45MHP10 45MJH2 #2 0.5 to 10.0 1.9 to 37.9 0.02 to 0.42 0.08 to 1.58 0.04 to 0.89 1.32 to 26.32 1.5 to 30.3 0.06 to 1.26 1.04 to 21.04
45MHP22 45MJH7 #7 1.1 to 22.0 4.2 to 83.3 0.05 to 0.92 0.18 to 3.47 0.10 to 1.96 2.92 to 57.85 3.3 to 66.6 0.14 to 2.78 2.29 to 46.25
85MHP5 85MJH1 #1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13 0.9 to 15.1 0.04 to 0.63 0.52 to 10.49
85 SERIES
85MHP17 85MJH2 #2 0.8 to 17.0 3.0 to 64.4 0.03 to 0.71 0.13 to 2.68 0.07 to 1.51 2.08 to 44.65 2.4 to 51.5 0.10 to 2.15 1.67 to 35.76
85MHP40 85MJH7 #7 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.14 6.1 to 121.1 0.25 to 5.05 4.24 to 84.10
4 www.stenner.com
Single Head Fixed Output 0-25 psi (0-1.7 bar)
Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters
Model
Prefix Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute
45MP1 45MFL1 #1 3.0 11.4 0.13 0.48 0.27 7.92 9.1 0.38 6.32
45MP2 45MFL2 #2 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04
45 SERIES
45MP3 45MFL3 #3 22.0 83.3 0.92 3.47 1.96 57.85 66.6 2.78 46.25
45MP4 45MFL4 #4 35.0 132.5 1.46 5.52 3.11 92.01 106.0 4.42 73.61
45MP5 45MFL5 #5 50.0 189.3 2.08 7.89 4.44 131.43 151.4 6.31 105.14
85MP1 85MFL1 #1 5.0 18.9 0.21 0.79 0.44 13.13 15.1 0.63 10.49
85MP2 85MFL2 #2 17.0 64.4 0.71 2.68 1.51 44.65 51.5 2.15 35.76
85 SERIES
85MP3 85MFL3 #3 40.0 151.4 1.67 6.31 3.55 105.14 121.1 5.05 84.10
85MP4 85MFL4 #4 60.0 227.1 2.50 9.46 5.33 157.71 181.7 7.57 126.18
85MP5 85MFL5 #5 85.0 321.8 3.54 13.40 7.55 223.40 257.4 10.73 178.75
Approximate Output @ 60Hz Approximate Output @ 50Hz
45MPHP2 45MFH1 #1 3.0 11.4 0.13 0.48 0.27 7.92 9.1 0.38 6.32
45 SERIES
45MPHP10 45MFH2 #2 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04
45MPHP22 45MFH7 #7 22.0 83.3 0.92 3.47 1.96 57.85 66.6 2.78 46.25
85MPHP5 85MFH1 #1 5.0 18.9 0.21 0.79 0.44 13.13 15.1 0.63 10.49
85 SERIES
85MPHP17 85MFH2 #2 17.0 64.4 0.71 2.68 1.51 44.65 51.5 2.15 35.76
85MPHP40 85MFH7 #7 40.0 151.4 1.67 6.31 3.55 105.14 121.1 5.05 84.10
Approximate Output @ 60Hz ApproximateOutput @ 50Hz
NOTE: Injection check valve included with pumps rated 26-100 psi (1.8-6.9 bar).
NOTICE: The information within these charts is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing
environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical
testing to confirm their outputs.
Double Head Adjustable Output 0-25 psi (0-1.7 bar) Approximate 20:1 turndown, 2.5% increments
Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters
Model
Prefix Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute
100DM1 100JL1 #1 0.3 to 6.0 1.1 to 22.7 0.01 to 0.25 0.05 to 0.95 0.03 to 0.53 0.76 to 15.76 0.9 to 18.2 0.04 to 0.76 0.61 to 12.64
100JL2
100 SERIES
100DM2 #2 1.0 to 20.0 3.8 to 75.7 0.04 to 0.83 0.16 to 3.15 0.09 to 1.78 2.64 to 52.57 3.0 to 60.6 0.13 to 2.53 2.11 to 42.06
100DM3 100JL3 #3 2.2 to 44.0 8.3 to 166.5 0.09 to 1.83 0.35 to 6.94 0.19 to 3.91 5.76 to 115.63 6.6 to 133.2 0.28 to 5.55 4.58 to 92.50
100DM4 100JL4 #4 3.5 to 70.0 13.2 to 265.0 0.15 to 2.92 0.55 to 11.04 0.31 to 6.22 9.17 to 184.03 10.6 to 212.0 0.44 to 8.83 7.36 to 147.22
100DM5 100JL5 #5 5.0 to 100.0 18.9 to 378.5 0.21 to 4.17 0.79 to 15.77 0.44 to 8.88 13.13 to 262.88 15.1 to 302.8 0.63 to 12.61 10.49 to 210.28
170DM1 170JL1 #1 0.5 to 10.0 1.9 to 37.9 0.02 to 0.42 0.08 to 1.58 0.04 to 0.89 1.32 to 26.32 1.5 to 30.3 0.06 to 1.26 1.04 to 21.04
170DM2 170JL2 #2 1.7 to 34.0 6.4 to 128.7 0.07 to 1.42 0.27 to 5.36 0.15 to 3.02 4.44 to 89.38 5.1 to 102.6 0.21 to 4.29 3.54 to 71.55
170 SERIES
170DM3 170JL3 #3 4.0 to 80.0 15.1 to 302.8 0.17 to 3.33 0.63 to 12.62 0.35 to 7.11 10.49 to 210.28 12.1 to 242.2 0.50 to 10.09 8.40 to 168.22
170DM4 170JL4 #4 6.0 to 120.0 22.7 to 454.2 0.25 to 5.00 0.95 to 18.93 0.53 to 10.66 15.76 to 315.42 18.2 to 363.4 0.76 to 15.14 12.64 to 252.36
170DM5 170JL5 #5 8.5 to 170.0 32.2 to 643.5 0.35 to 7.08 1.34 to 26.80 0.76 to 15.10 22.36 to 446.88 25.7 to 514.8 1.07 to 21.45 17.92 to 357.50
Double Head Adjustable Output 26-100 psi (1.8-6.9 bar) Approximate 20:1 turndown, 2.5% increments
Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters
Model
Prefix Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute
100JH1
170 SERIES 100 SERIES
100DMHP5 #1 0.3 to 6.0 1.1 to 22.7 0.01 to 0.25 0.05 to 0.95 0.03 to 0.53 0.76 to 15.76 0.9 to 18.2 0.04 to 0.76 0.61 to 12.64
100DMHP20 100JH2 #2 1.0 to 20.0 3.8 to 75.7 0.04 to 0.83 0.16 to 3.15 0.09 to 1.78 2.64 to 52.57 3.0 to 60.6 0.13 to 2.53 2.11 to 42.06
170DMHP9 170JH1 #1 0.5 to 10.0 1.9 to 37.9 0.02 to 0.42 0.08 to 1.58 0.04 to 0.89 1.32 to 26.32 1.5 to 30.3 0.06 to 1.26 1.04 to 21.04
170DMHP34 170JH2 #2 1.7 to 34.0 6.4 to 128.7 0.07 to 1.42 0.27 to 5.36 0.15 to 3.02 4.44 to 89.38 5.1 to 102.6 0.21 to 4.29 3.54 to 71.55
6 www.stenner.com
Double Head Fixed Output 0-25 psi (0-1.7 bar)
Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters
Model
Prefix Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute
100DMP1 100FL1 #1 6.0 22.7 0.25 0.95 0.53 15.76 18.2 0.76 12.64
100FL2
100 SERIES
100DMP2 #2 20.0 75.7 0.83 3.15 1.78 52.57 60.6 2.53 42.06
100DMP3 100FL3 #3 44.0 166.5 1.83 6.94 3.91 115.63 133.2 5.55 92.50
100DMP4 100FL4 #4 70.0 265.0 2.92 11.04 6.22 184.03 212.0 8.83 147.22
100DMP5 100FL5 #5 100.0 378.5 4.17 15.77 8.88 262.88 302.8 12.61 210.28
170DMP1 170FL1 #1 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04
170DMP2 170FL2 #2 34.0 128.7 1.42 5.36 3.02 89.38 102.6 4.29 71.55
170 SERIES
170DMP3 170FL3 #3 80.0 302.8 3.33 12.62 7.11 210.28 242.2 10.09 168.22
170DMP4 170FL4 #4 120.0 454.2 5.00 18.93 10.66 315.42 363.4 15.14 252.36
170DMP5 170FL5 #5 170.0 643.6 7.08 26.80 15.10 446.88 514.8 21.45 357.50
100FH1
170 SERIES 100 SERIES
100DMPHP5 #1 6.0 22.7 0.25 0.95 0.53 15.76 18.2 0.76 12.64
100DMPHP20 100FH2 #2 20.0 75.7 0.83 3.15 1.78 52.57 60.6 2.53 42.06
170DMPHP9 170FH1 #1 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04
170DMPHP34 170FH2 #2 34.0 128.7 1.42 5.36 3.02 89.38 102.6 4.29 71.55
Quick Facts
• 0.3 to 40.0 gpd, pressures to 100 psi
• 0.3 to 85.0 gpd, pressures to 25 psi
• Digital keypad with LED display
• 20:1 turndown, 1% increments, non-scalable
SVP1
• Manual output control
SVP4
SVP1 • Automatic output control via 4-20mA signal
Digital keypad or manually adjusted
The SVP is categorized into two sub-series, SVP1 and SVP4. The SVP1 is • Advantages of Stenner peristaltic pumps on page 1
manually adjusted using the keypad. The SVP4 is designed to respond directly • Fast tube replacement without tools with patent
to a 4-20mA input signal from water treatment controls. The pump is equipped pending QuickPro® pump head
with an external port to accept the signal or it can override the 4-20 mode to be • DC motor
manually adjusted with the arrows on the keypad. • Motor and pump head detachable without tools
• Rugged polycarbonate housing
• Heavy duty gear motor
• 4 button keypad: prime, on/off, up & down arrows
8 www.stenner.com
Specifications
Output Control Digital keypad
Reproducibility ±2%
Maximum Working Pressure
25 psi (1.7 bar), 100 psi (6.9 bar)
Maximum Operating Temperature 125°F (52°C)
Weights and Dimensions Maximum Suction Lift
Shipping Weight 10 lbs (4.5 kg) 25 ft (7.6 m) vertical lift, based on water
Box Dimensions 14 x 9 x 9 in. (35 x 23 x 23 cm) Motor Type 12VDC gear motor
Product Dimensions Shaft rpm 47
Duty Cycle Continuous
Motor Voltage (Amp Draw)
6.1" 10.1" 120V 50/60Hz 1PH (1.5) , 220V 50/60Hz 1PH (1.5),
12VDC (4.2), 230V 50/60Hz 1PH (1.5) INT'L,
250V 50/60Hz 1PH (1.5) INT'L
Power Cord Type
7.0" 120V, 220V, 230V, 250V: SJTOW
12VDC: VW-1
Power Cord Plug End
120V 60Hz NEMA 5/15, 220V 60Hz NEMA 6/15,
230V 50Hz CEE 7/VII, 250V 50Hz CEE 7/VII
12VDC Pigtail connection
Materials of Construction
All Housings Polycarbonate
Pump Tube & Check Valve Duckbill Santoprene®*,
optional Versilon™**, FDA approved
CV Duckbill with Versilon™** Tube Pellathane®†
Pump Head Rollers HDPE
Roller Bushings Oil impregnated sintered bronze
Suction/Discharge Tubing, Ferrules 1/4" & 6 mm
Polyethylene, FDA approved
Tube Fittings, Check Valve Fittings
Accessory Kit Shipped with Each Pump Gray fittings: Type 1 Rigid PVC, NSF listed
3 connecting nuts 1/4" or 3/8" Black fittings: PP, NSF listed
3 ferrules 1/4" or 6 mm EUROPE Connecting Nuts PP or Type 1 Rigid PVC
3/8" Adapter Type 1 Rigid PVC, NSF listed
1 injection check valve 100 psi (6.9 bar) OR 1 injection fitting 25 psi (1.7 bar)
Suction Line Strainer PP or Type 1 Rigid PVC body
1 weighted suction line strainer 1/4", 3/8" or 6 mm EUROPE
with Type 1 Rigid PVC cap, NSF listed; ceramic weight
1 20' roll suction/discharge tubing 1/4" or 3/8", white or UV black All Fasteners Stainless steel
OR 6 mm white EUROPE
Pump Head Latches Polypropylene
1 additional pump tube
2 additional latches Agency Listings
1 manual • Models tested by Water Quality Association to
conform to ANSI/NSF STD 61 (Santoprene®* only)
SVP1L1 SVP1L1 #1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13
SVP1L2 SVP1L2 #2 0.8 to 17.0 3.0 to 64.4 0.03 to 0.71 0.13 to 2.68 0.07 to 1.51 2.08 to 44.65
MANUAL
SVP1L3 SVP1L3 #3 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.14
SVP1L4 SVP1L4 #4 3.0 to 60.0 11.4 to 227.1 0.13 to 2.50 0.48 to 9.46 0.27 to 5.33 7.92 to 157.71
SVP1L5 SVP1L5 #5 4.3 to 85.0 16.3 to 321.8 0.18 to 3.54 0.68 to 13.40 0.38 to 7.55 11.32 to 223.40
SVP4L1 SVP4L1 #1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13
4-20mA INPUT*
SVP4L2 SVP4L2 #2 0.8 to 17.0 3.0 to 64.4 0.03 to 0.71 0.13 to 2.68 0.07 to 1.51 2.08 to 44.65
SVP4L3 SVP4L3 #3 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.14
SVP4L4 SVP4L4 #4 3.0 to 60.0 11.4 to 227.1 0.13 to 2.50 0.48 to 9.46 0.27 to 5.33 7.92 to 157.71
SVP4L5 SVP4L5 #5 4.3 to 85.0 16.3 to 321.8 0.18 to 3.54 0.68 to 13.40 0.38 to 7.55 11.32 to 223.40
SVP1H1 SVP1H1 #1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13
MANUAL
SVP1H2 SVP1H2 #2 0.8 to 17.0 3.0 to 64.4 0.03 to 0.71 0.13 to 2.68 0.07 to 1.51 2.08 to 44.65
SVP1H7 SVP1H7 #7 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.14
SVP4H1
4-20mA INPUT*
SVP4H1 #1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13
SVP4H2 SVP4H2 #2 0.8 to 17.0 3.0 to 64.4 0.03 to 0.71 0.13 to 2.68 0.07 to 1.51 2.08 to 44.65
SVP4H7 SVP4H7 #7 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.14
10 www.stenner.com
M128 SERIES 1:128 Medicator with Relay
Quick Facts
• Potentiometer with adjustable pulse rate
1, 2, 4, 10 ppg (10 ppg in M07 model only) or 1 ppl
• Standby setting
• Internal relay
M05
• 8.4 oz/min, pressures to 25 psi
Potentiometer M07
backside of pump • 3.5 oz/min, pressures to 100 psi
M128
Activated by a Pulse Water Meter
The M128, also referred to as a medicator, doses solution at a 1:128 ratio to • Advantages of Stenner peristaltic pumps on page 1
inject livestock water with sanitizers, disinfectants, nutrients and medication. • Fast tube replacement without tools with patent
Featuring an internal relay, the pump has a cable with four lead wires; two are pending QuickPro® pump head
connected to the water meter. For installations with a house controller, the two • A water bypass is not needed; there is no water
remaining wires are connected to the controller to register water consumption. restriction or pressure loss
If the pump is placed in standby, the internal relay allows the pulse meter to • No need for back pressure valves and filters
continue to register water consumption with the house controller. upstream to pull out grit, sand and debris
• Solution is not in contact with moving parts
M128 Meter System or Tank System
For convenient and quick installations or turnkey operations, the M128 Meter
System is equipped with the pump and corresponding dry contact 3/4" or 1"
water meter mounted on a heavy duty panel. The tank system is also shipped
pre-assembled.
12 www.stenner.com
M128 Output 0-25 psi (0-1.7 bar)
Item Number Pump Tube Ounces Gallons Gallons Milliliters Liters Liters
Model
Prefix Number per Minute per Hour per Day per Minute per Hour per Day
Maximum system water flow for 1:128 dosing is 8.4 gallons/minute or 31.8 liters/minute.
Maximum system water flow for 1:128 dosing is 3.5 gallons/minute or 13.2 liters/minute.
NOTE: 1 oz = 29.57 ml ; 1 gallon = 3.78 liters. Contact factory for assistance with sizing.
NOTE: Injection check valve included with pumps rated 26-100 psi (1.8-6.9 bar).
NOTICE: The information within these charts is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing
environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of
analytical testing to confirm their outputs.
Omit if not ordering a Meter System Omit if not ordering a Tank System
Voltage & Hertz
1 120V 60Hz Includes PLASTIC WATER METER certified with WQA under ANSI/NSF-372 Tank
2 220V 60Hz System (Pump and Plastic Water Meter mounted on a panel) 7N 7.5-Gallon White
7G 7.5-Gallon UV Gray
34 1P 3/4" 1 pulse/gallon 0 11 P 1" 1 pulse/gallon
1N 15-Gallon White
34 2P 3/4" 2 pulses/gallon 0 12 P 1" 2 pulses/gallon
1G 15-Gallon UV Gray
34 4P 3/4" 4 pulses/gallon 0 14 P 1" 4 pulses/gallon
3N 30-Gallon White
3G 30-Gallon UV Gray
NOTE: Tanks also sold separately on page 35.
NOTE: Includes 1/4" white suction/discharge tubing only.
Tank System and Meter System are two separate systems and are not sold as one.
Quick Facts
• 2.7 ounces per minute, pressures to 80 psi
• 1,10 ppg and 1 ppl water meter pulse settings
• Internal relay
• Standby setting
• Wall adapter power supply
14 www.stenner.com
Specifications
Output Control On/off switch, fixed output
Reproducibility ±2%
Maximum Working Pressure 80 psi (5.5 bar)
Maximum Operating Temperature 104°F (40°C)
Maximum Suction Lift
Weights and Dimensions 25 ft (7.6 m) vertical lift, based on water
Pump Motor Type 24VDC, brushless
Shipping Weight 4 lbs (1.8 kg) Shaft rpm 60
Box Dimensions 8 x 7 x 10 in. (20 x 18 x 25 cm) Duty Cycle Continuous
Product Dimensions Max Viscosity 50 cps
Motor Voltage (Amp Draw) 120V 60Hz (0.17)
External Power Supply 100-120VAC, 60Hz
5.9" Power Cord Type STP-2W
Power Cord Length 10 ft (3.05 m)
Power Cord Plug End
Wall adapter power supply 100-120V, 60Hz, 0.75A input,
3.7" two prong, polarized 24VDC, 1.25A, Class II output
4.4" 5.4" Classification Indoor/Outdoor
Meter System
Shipping Weight Box Dimensions Materials of Construction
Single 17 lbs (7.5 kg) All Housings Polycarbonate
24 x 12 x 23 in. (60 x 30 x 58 cm) Pump Tube & Check Valve Duckbill Santoprene®*,
Dual 20 lbs (8.8 kg)
FDA approved
Pump Head Rollers Polyethylene
ECON STENNICATOR Output 80 psi (5.5 bar) maximum Suction/Discharge Tubing, Ferrules
Pump Roller Ounces Milliliters Polyethylene, FDA approved
Item Number
Tube Assembly per Minute per Minute Tube Fittings Polypropylene, NSF listed
E20MH81S H Black 2.7 74.0 Check Valve Fittings
Approximate Maximum Output @ 50/60Hz
Type 1 Rigid PVC, NSF listed
NOTE: Injection check valve included. Connecting Nuts PP or Type 1 Rigid PVC
NOTICE: The information within this chart is solely intended for use as a guide. The output data Suction Line Strainer PP or Type 1 Rigid PVC body
is an approximation based on pumping water under a controlled testing environment. Many
variables can affect the output of the pump. Stenner Pump Company recommends that all with Type 1 Rigid PVC cap, NSF listed; ceramic weight
metering pumps undergo field calibration by means of analytical testing to confirm their outputs. All Fasteners Stainless steel
Agency Listings
E 2 0 M H 8 1 S
Select Item Number Prefix from output chart above
* Santoprene® is a registered trademark of Exxon Mobil Corporation.
Quick Facts
• 4.5, 16.0, 30.0 gpd, pressures to 80 psi
• Digital keypad with with LCD display
• 10:1 turndown, 1% increments
• Flow activated with internal relay
• Wall adapter power supply
Livestock Water
16 www.stenner.com
Specifications
Output Control Six button control panel with
LCD display
Reproducibility ±2%
Maximum Working Pressure 80 psi (5.5 bar)
Maximum Operating Temperature 104°F (40°C)
Weights and Dimensions Maximum Suction Lift
Pump 25 ft (7.6 m) vertical lift, based on water
Shipping Weight 4 lbs (1.8 kg) Motor Type 24VDC, brushless
Box Dimensions 8 x 7 x 10 in. (20 x 18 x 25 cm) Shaft rpm 60
Product Dimensions Duty Cycle Continuous
Motor Voltage (Amp Draw)
120V 60Hz (0.17)
External Power Supply
5.9" 100-120VAC, 60Hz
Power Cord Type STP-2W
Power Cord Plug End
Wall adapter power supply 100-120V, 60Hz 0.75A input,
3.7" 5.4" two prong, polarized 24VDC, 1.25A, Class II output
Classification Indoor/Outdoor
Meter System
Materials of Construction
Shipping Weight 17 lbs (7.5 kg)
All Housings Polycarbonate
Box Dimensions 24 x 12 x 23 in. (60 x 30 x 58 cm)
Pump Tube & Check Valve Duckbill Santoprene®*,
FDA approved
Pump Head Rollers Polyethylene
Suction/Discharge Tubing, Ferrules
Polyethylene, FDA approved
Tube Fittings Polypropylene, NSF listed
Check Valve Fittings
Type 1 Rigid PVC, NSF listed
Connecting Nuts PP or Type 1 Rigid PVC
Suction Line Strainer PP or Type 1 Rigid PVC body
with Type 1 Rigid PVC cap, NSF listed; ceramic weight
All Fasteners Stainless steel
Accessory Kit Shipped with Each Pump
Agency Listings
3 connecting nuts 1/4"
3 ferrules 1/4" or 6 mm EUROPE
1 injection check valve
1 weighted suction line strainer 1/4"
1 20' roll suction/discharge tubing 1/4" white or UV black * Santoprene® is a registered trademark of Exxon Mobil Corporation.
OR 6 mm white EUROPE
1 additional pump tube
1 manual
E20RHF F White 10:1 4.5 0.19 24.0 0.40 17.01 0.71 708.8 11.8
E20RHG G Black 10:1 16.0 0.67 85.3 1.42 60.48 2.52 2520.0 42.0
E20RHH H Black 10:1 30.0 1.25 160.0 2.67 113.40 4.72 4725.0 78.8
S
Select Item Number Prefix from output chart above
Tank System and Meter System are two separate systems and are not sold as one.
18 www.stenner.com
ECON FP SERIES Flow Activated Pump
Quick Facts
• 4.5, 16.0, 30.0 gpd, pressures to 80 psi
• Digital keypad with LCD display
• 10:1 turndown, 1% increments
• Wall adapter power supply
Control Panel The Econ FP is activated by flow and offers three control
capabilities to choose from all in one pump. The pump can
accept a dry contact signal or a 12-24 VAC/VDC signal from
ECON FP
control equipment that responds to flow. Based on the mode
of operation selected, the pump runs at a set time or a set
speed in response to receiving a signal. The control panel
displays one of three operating modes: Seconds, Flow Switch
or Auxiliary. The pump is designed for light duty applications
such as drinking water disinfection or pH adjustment for
private water wells in homes or farms.
The Econ FP is offered as a Meter System or Tank System,
shipped pre-assembled for quick installations.
SECONDS: The pump can accept a dry (non-voltage) contact signal and • Advantages of Stenner peristaltic pumps on page 1
will run for a set time in response to receiving the signal. There are five • Patented quick release pump head
pump operating time ranges; the maximum time is displayed on the • Effortless tube replacement without tools
control panel. The run time is adjustable from 10% to 100% in 1% • Enclosed housing
increments. • Solid one piece tube construction
1 second = 0.1-1.0 5 seconds = 0.5-5.0 10 seconds = 1.0-10.0
• Wall mountable
20 seconds = 2.0-20.0 60 seconds = 6.0-60.0
• Optional mounting accessories available
FLOW SWITCH: The pump can accept a dry (non-voltage) contact signal
• cULus for indoor/outdoor use
from a 2 wire flow switch and will run at the set speed as long as it
• NSF 61 & 372
receives the dry contact. The pump speed is adjustable from 10% to 100%
• CE
in 1% increments.
AUXILIARY: The pump can accept a 12-24 VAC/VDC signal from control
equipment that responds to flow and will run at a set speed for as long
as it receives the signal. The pump speed is adjustable from 10% to 100%
in 1% increments.
3.7" 5.4"
Meter System
Shipping Weight 17 lbs (7.5 kg)
Box Dimensions 24 x 12 x 23 in. (60 x 30 x 58 cm)
20 www.stenner.com
ECON FP OUTPUT 80 psi (5.5 bar) maximum
Item Number Pump Tube Roller Turndown Gallons Gallons Ounces Ounces Liters Liters Milliliters Milliliters
Prefix Number Assembly Ratio per Day per Hour per Hour per Minute per Day per Hour per Hour per Minute
E20PHF F White 10:1 4.5 0.19 24.0 0.40 17.01 0.71 708.8 11.8
E20PHG G Black 10:1 16.0 0.67 85.3 1.42 60.48 2.52 2520.0 42.0
E20PHH H Black 10:1 30.0 1.25 160.0 2.67 113.40 4.72 4725.0 78.8
S
Select Item Number Prefix from output chart above
Tank System and Meter System are two separate systems and are not sold as one.
Quick Facts
• 2.5-15.0 gpd, pressures to 25 psi
• 0.6-21.7 gpd, pressures to 80 psi
• Digital keypad with LCD display
• Adjustable run time per event
• Wall adapter power supply
The Econ T has 24 independent programmable on and off events within a 7 • Advantages of Stenner peristaltic pumps on page 1
day period. Each event can be programmed for a specific On time and • Patented quick release pump head
specific Off time for each selected day or days of the week. Each timer can be • Effortless tube replacement without tools
set in hour and minute increments. The programmable clock uses a 24 hour • Enclosed housing
format. A battery is included as a back-up to power loss, to maintain the • Wall mountable
internal time and programmed event settings. When the pump is operating, • Optional mounting accessories available
the screen displays the current day, time of day, and the mode of operation.
• cULus for indoor/outdoor use
• NSF 61 & 372
• NSF 50 (25 psi models only)
• CE
22 www.stenner.com
Specifications
Output Control 24-hr programmable clock;
7 day, 24 event timer
Reproducibility ±5%
Maximum Working Pressure
80 psi (5.5 bar) and 25 psi (1.7 bar)
Weights and Dimensions Maximum Operating Temperature 104°F (40°C)
Shipping Weight 4 lbs (1.8 kg) Maximum Suction Lift
Box Dimensions 8 x 7 x 10 in. (20 x 18 x 25 cm) 25 ft (7.6 m) vertical lift, based on water
Product Dimensions Motor Type 24VDC, brushed
Shaft rpm 9, 18 or 40
Duty Cycle Continuous
Motor Voltage (Amp Draw) 120V 60Hz (0.17)
External Power Supply
5.9" 100-120V, 60Hz
Power Cord Type STP-2W
Power Cord Plug End
3.7" Wall adapter power supply 100-120V, 60Hz, 0.75A
4.4" 5.4" input, two prong, polarized 24VDC, 1.25A,
Class II output
Classification Indoor/Outdoor
Materials of Construction
All Housings Polycarbonate
Pump Tube & Check Valve Duckbill Santoprene®*,
FDA approved
Pump Head Rollers Polyethylene
Suction/Discharge Tubing, Ferrules
Polyethylene, FDA approved
Tube Fittings Polypropylene, NSF listed
Check Valve Fittings
Type 1 Rigid PVC, NSF listed
Connecting Nuts PP or Type 1 Rigid PVC
Suction Line Strainer PP or Type 1 Rigid PVC body
Accessory Kit Shipped with Each Pump with Type 1 Rigid PVC cap, NSF listed; ceramic weight
All Fasteners Stainless steel
3 connecting nuts 1/4"
3 ferrules 1/4" or 6 mm EUROPE Agency Listings
1 injection check valve 80 psi (5.5 bar) • 25 psi models tested and certified by Intertek to
OR 1 injection fitting 25 psi (1.7 bar) Standard ANSI/NSF 50, Equipment for Swimming
1 weighted suction line strainer 1/4" Pools, Spas, Hot Tubs, and Other Recreational
Water Facilities.
1 20' roll suction/discharge tubing 1/4" white or UV black
OR 6 mm white EUROPE
1 additional pump tube
1 manual
E10T1A A White 2.5 0.10 13.2 0.22 25 9.5 0.39 396.0 6.60 1.7
E10T2A A White 5.0 0.21 26.4 0.44 25 18.9 0.79 786.0 13.10 1.7
E10T2B B White 8.5 0.35 45.6 0.76 25 32.2 1.34 1338.0 22.30 1.7
E10T2C C White 15.0 0.63 79.8 1.33 25 56.8 2.37 2364.0 39.40 1.7
E10T1F F White 0.6 0.02 3.0 0.05 80 2.2 0.09 90.0 1.50 5.5
E10T2F F White 1.3 0.05 6.6 0.11 80 4.8 0.20 198.0 3.30 5.5
E20T4F F White 3.4 0.14 18.0 0.30 80 13.1 0.54 544.8 9.08 5.5
E20T4G G Black 12.3 0.51 65.4 1.09 80 46.5 1.94 1937.4 32.29 5.5
E20T4H H Black 21.7 0.90 115.2 1.92 80 82.0 3.41 3416.4 56.94 5.5
NOTE: Injection check valve included with pumps rated 80 psi (5.5 bar).
NOTICE: The information within these charts is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing
environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of
analytical testing to confirm their outputs.
S
Select Item Number Prefix from output chart above
24 www.stenner.com
ECON LD SERIES Low Volume Pump
Quick Facts
• 0.04-8.1 oz/hr, pressures to 80 psi
• Adjustable potentiometer
• 50:1 turndown
Features
ECON Tank System
• Advantages of Stenner peristaltic pumps on page 1
• Patented quick release pump head
• Effortless tube replacement without tools
Accessory Kit Shipped with Each Pump • Brushless motor
3 connecting nuts 1/4" • Enclosed housing
3 ferrules 1/4" • Optional mounting accessories available
1 injection check valve • Tank System ships with pump pre-mounted to
the tank.
1 weighted suction line strainer 1/4"
• cULus for indoor/outdoor use
1 20' roll suction/discharge tubing 1/4" white
• CE listed, varies by model
1 additional pump tube
1 manual
Approximate Maximum
Output @ 50/60Hz
NOTE: Injection check valve included.
NOTICE: The information within this chart is solely intended for use as a
5.9" guide. The output data is an approximation based on pumping water
under a controlled testing environment. Many variables can affect the
output of the pump. Stenner Pump Company recommends that all
metering pumps undergo field calibration by means of analytical testing
to confirm their outputs.
3.7"
4.4" 5.2"
S
Select Item Number Prefix from output chart above
On/Off Switch
Stenner’s custom OEM pump can be designed with the The custom OEM batch pump is factory programmed to run a
customer’s supplied motor and gearbox. A standard OEM specific length of time when manually activated by an integral
bracket is provided, or a custom bracket can be designed. The switch or can be designed to activate with an input signal. The
pump is offered with a brushless or brushed DC motor, and as customer selects the pump run time from 0.1 seconds to 24
an open or enclosed version. hours per activations.
Enclosed versions offer an optional internal power supply and The pre-set fluid volume choices are up to 50 gallons per day,
customizable power cord for 100-240VAC, 50/60Hz. The up to 80 psi (189.3 liters per day, up to 5.5 bar). The pump is
customer selects the fixed output from ranges of 0.04 ounces supplied with a 24VDC brushless motor and a customizable
per hour to 2.08 gallons per hour, up to 80 psi (1.3 milliliters power cord for 100-240VAC, 50/60Hz. The pump can also be
per hour to 7.88 liters per hour, up to 5.5 bar). supplied without an internal power supply.
5.9"
3.7"
4.4" 5.2"
Features
• Patented quick release pump head • Select custom color • Serviceable liquid end, gear train & motor
• Anti-siphon 3 point roller design • Optional tube materials • Agency approvals available
• Indoor/Outdoor • Dual bearing support output shaft • Voltage options
Components
1 Classic single head fixed output pump
2 PCM (pump control module)
3 Plastic 3/4" dry contact water meter, certified
by WQA to ANSI/NSF 372, low lead
4 Flow Indicator to confirm pump is operating
5 Filter with 30 and 100 mesh screens
6 Unions for easy installation and removal
7 Cabinet to keeps cords and wires contained
8 Heavy duty panel and wall mounting bracket
7 4
8
5 3 6
28 www.stenner.com
Specifications
Weights and Dimensions Voltage 120V 60Hz
Shipping Weight
Materials of Construction
• Single: 33 lbs (15.0 kg)
Panel & Panel Fittings Polyethylene
• Dual: 45 lbs (20.4 kg)
Mounting Hardware Stainless steel
Box Dimensions Piping and Associated Fittings PVC
• Single: 36 x 11 x 23 in. (90 x 28 x 58 cm) Water Meter Plastic lead free (certified with
• Dual: 43 x 27 x 12 in. (109 x 69 x 30 cm) WQA/ANSI-372)
Filter PVC with polycarbonate cover and two
polyester screens 30 and 100 mesh
NOTE: PVC connections are socket weld union 3/4" connections.
Two 1" to 3/4" reducer couplings are included in the accessory kit
to allow unit to adapt to 1" piping systems.
System Classic Single Head Pump & PCM Voltage PCM Plastic Water Meter 3/4"
S Single Fixed Pump 1 120V 60Hz Operating Range (sec.) Model 341P 1 pulse/gallon
D Dual gpd lpd Model 01 0.1 to 1.0 PCM1 3 42 P 2 pulses/gallon
03 3 11.4 45MPHP2 05 0.5 to 5.0 PCM5 344P 4 pulses/gallon
05 5 18.9 85MPHP5 10 1.0 to 10.0 PCM10
10 10 37.9 45MPHP10 20 2.0 to 20.0 PCM20
17 17 64.4 85MPHP17
22 22 83.3 45MPHP22
40 40 151.4 85MPHP40
NOTE: Proportional Injection System includes 1/4" white suction/discharge tubing only.
Quick Facts
Features
• Chemical resistant ABS plastic housing
Potentiometer • On-time duration set with knob adjustment with locking feature
• 10' power cord and jacketed signal input cable
Pump Control Module
The PCM is one of the components in the Proportional Injection System or a proportional feed installation. A proportional feed set-up is suited
for constant pressure (variable speed) well pumps and applications with varying flow rates requiring proportional injection.
3/4" Plastic
Water Meter
Water Meter
The Proportional Injection System includes a You can customize your own proportional feed installation by
PCM, a Classic Series single head fixed individually selecting a PCM, a Classic Series single head
output pump and a 3/4" plastic water meter. fixed output pump and water meter. The components are
sold separately.
30 www.stenner.com
The PCM’s operating range can be converted by
Weights and Dimensions
changing the position of the jumpers on the circuit
Shipping Weight 2 lbs (0.9 kg) board so another model doesn’t have to be purchased.
Box Dimensions 9 x 8 x 7 in. (23 x 20 x 18 cm)
Jumpers
1.8"
5.8"
3.6"
Agency Listings
Quick Facts
The plastic water meter doesn’t require power and utilizes a reed switch to
provide a pulsing dry contact signal. The meter is certified by WQA to ANSI/NSF
372, low lead.
The 3/4" or 1" meter is included with the Econ or M128 Meter Systems. The 3/4"
is included with the Proportional Injection System. Purchase components
individually to assemble your own system.
1" 3 lbs (1.2 kg) 10.25" (26.0 cm) 15.25" (38.7 cm) 1.25" 1"
1 1/2" 7 lbs (2.7 kg) 9.63" (24.4 cm) 14.75" (37.5 cm) 2" 1 1/2"
Flow Rates*
Size Flow Rate gpm Pulses Per Gallon
32 www.stenner.com
STAINLESS STEEL WATER METER
Quick Facts
The stainless steel water meter doesn’t require power and utilizes a reed switch
to provide a pulsing dry contact signal. The meter is certified by WQA to ANSI/NSF
372, low lead.
The meter is sold separately for selecting products individually for a proportional
feed installation.
Materials of Construction
Body Stainless steel
Internal Engineered thermoplastic
Magnet Alnico
Quick Facts
The tank system consists of a tank and pump. The system is factory assembled with
your pump choice: Classic single head adjustable or fixed, M128 or Econ and your
tank choice: 7.5, 15, 30 gallon, in white or UV resistant gray.
Features
7.5-Gallon (28.4 Liters)
• Includes rain roof to help protect motor (Classic series only)
• Vertically mounted for solution containment
• Child resistant lid
• Polyethylene construction is lightweight and rugged
15-Gallon 27 lbs (12.3 kg) 26 lbs (11.8 kg) 22 lbs (10.0 kg) 23 x 23 x 26 in. (58 x 58 x 66 cm)
30-Gallon 34 lbs. (15.4 kg) 32 lbs (14.5 kg) 28 lbs (12.7 kg) 23 x 23 x 38 in. (58 x 58 x 96 cm)
NOTE: Build a tank system item number on pages 4-5, 13, 15, 18, 21, 24, 26.
Product Dimensions
• 7.5-Gallon: 20.5 OD x 19.6 in. (52.1 OD x 49.8 cm)
• 15-Gallon: 20.5 OD x 25.3 in. (52.1 OD x 64.1 cm)
• 30-Gallon: 20.5 OD x 37.5 in. (52.1 OD x 95.3 cm)
Rain Roof
30-Gallon (113.6 Liters)
Vertical mount over
containment basin
Materials of Construction Child Resistant Lid
Tank Polyethylene
Lid with child resistant lock Polypropylene Level Indicators
Grommets Viton
Screws Stainless steel
Tank system with Classic Series
Agency Listings
single head adjustable pump
34 www.stenner.com
TANKS 7.5, 15 or 30 Gallon
Quick Facts
• UV resistant gray or translucent white
• 7.5, 15 or 30 gallon
• Child resistant lid
• Polyethylene construction
• Lightweight
7.5-Gallon (28.4 Liters)
Weights and Dimensions
Shipping Weight and Box Dimensions
Tank Size Shipping Weight Box Dimension
7.5-Gallon 15 lbs (6.8 kg) 23 x 23 x 20 in. (58 x 58 x 50 cm)
Product Dimensions
15-Gallon (56.8 Liters) • 7.5-Gallon: 20.5 OD x 19.6 in. (52.1 OD x 49.9 cm)
• 15-Gallon: 20.5 OD x 25.3 in. (52.1 OD x 64.1 cm)
• 30-Gallon: 20.5 OD x 37.5 in. (52.1 OD x 95.3 cm)
Quick Facts
7.5-Gallon Features
The Mixer’s design creates a rapid flow in a circular path. The speed and constant
movement delivers high volume output for constant mixing to help keep the
15-Gallon chemical in solution and prevent it from settling out around the outer edges of the
solution tank.
The mixing head is sealed to keep it from getting entangled with the suction line. The
sealed design eliminates the need for a suction line guard.
The mixer is easily installed by placing the unit in the solution tank opening, then,
attaching the safety screws with a Phillips head screwdriver and plugging it in.
30-Gallon
36 www.stenner.com
FLOW SWITCH Dry Contact
Quick Facts
The flow switch for PVC includes a glue-in adapter for easy mounting to a
standard PVC slip fit tee. The flow switch for copper has an adapter for
soldering to copper pipe. The nominal activation points are based on
installation into a Spears 3/4" or 1" schedule 80 PVC tee or an industry
standard, smooth 3/4" or 1" copper pipe. The activation points are 1.2
gallons per minute for 3/4" and 1.9 gallons per minute for the 1" flow switch.
Specifications A wiring harness is included with the Econ FP and the Econ Integrator for an
Switching Function Contact closes at increasing easy connection to the dry contact flow switch.
flow, opens at decreasing flow
Pressure Rating Maximum 145 psi*
Medium Temperature Maximum +212°F* (+100°C) Flow Switch
Ambient Temperature Maximum +158°F* (+70°C) ITEM NUMBER UM DESCRIPTION
Protection Class IP 65 EC500 EA 3/4" for PVC pipe
Switching Current Maximum 1A EC501 EA 1" for PVC pipe
Switching Voltage Maximum 230VAC, 48VDC EC50C EA 3/4" for copper pipe
Switching Capacity Maximum 26VA, 20W EC51C EA 1" for copper pipe
Materials of Construction
Body/Paddle System PPO Noryl GFN3
Adapter
PVC: Glue-in,
Copper: Brass, soldering
Gasket EPDM
Magnet Hard Ferrite
Cable PVC
Agency Listings
• cETLus Component Recognized
• UL 508
• UL 353
• CSA C22.2#14-05
• Water Regulations Advisory Scheme
Motor Base
38 www.stenner.com
CLASSIC SERIES CLASSIC SERIES
MOTOR SERVICE KITS FEED RATE CONTROL
AquaShield® (1)
Index Plate (1) AquaShield® (1)
Metal
Reduction Motor Shaft
Gear (1) with Gear (1)
Lifter (1) Screw A (3) Variable Cam (1)
Phenolic Gear Cover Screw
Gear Post (2) with Spacer (1) B (4)
PART NUMBER UM DESCRIPTION Works with PART NUMBER UM DESCRIPTION Works with
GSK45A KIT Gear Case Adjustable 45 & 100 FSK100 KIT Feed Rate Control Adjustable 45, 85,
GSK85A KIT Service Kit Adjustable 85 & 170 Service Kit 100 & 170
GSK45F KIT Fixed 45
GSK85F KIT Fixed 85
❶ ❷ ❸ ❹ ❺
❽ ❾
DIAGRAM PART NUMBER UM DESCRIPTION Works with DIAGRAM PART NUMBER UM DESCRIPTION Works with
❶ MP90000 EA Rain Roof All Classic Pumps PM6K0BL EA Gear Case with Posts All Classic Pumps
Not shown MP90001 EA Pump Cover Adjustable 45 & 85 PM6M000 EA Gear Posts
Not shown MP90002 KIT Pump Cover & Adjustable 45 & 85 MP6N040 EA Phenolic Gear with Adjustable 45 & 100 /
Rain Roof Spacer 26 rpm Fixed 45 & 100
❷ MP6B010 EA Power Cord 120V All Classic Pumps MP6N080 EA Phenolic Gear with Adjustable 85 & 170 /
MP6B020 EA Power Cord 220V Spacer 44 rpm Fixed 85 & 170
❸ MP6C000 EA Switch Boot MP6O040 EA Metal Reduction Adjustable 45 & 100 /
❹ MP6D000 EA On-Off Switch Plate Gear 26 rpm Fixed 45 & 100
40 www.stenner.com
CLASSIC SERIES
FEED RATE CONTROL PARTS
26-100 psi (1.8-6.9 bar) Santoprene®* tube Classic 100 & 170 only
Includes pump tube, duckbill, ferrules 1/4" (EUROPE 6 mm) QPA69■-2 2-PK select # 1 or 2 for ■
* Confirm material compatibility by referring to the chemical resistance guide in the catalog or on the website. Santoprene® is beige; Versilon™ and Pellathane® are clear; FKM is black.
42 www.stenner.com
QuickPro® PUMP HEAD PARTS
QuickPro® PUMP HEAD PARTS QuickPro® PUMP HEAD SERVICE KITS
Connecting
Nuts 1/4" (2)
Latches (2)
Duckbill (1) 26-100 psi only
Roller Assembly (1) Ferrules 1/4"
or 6 mm (3)
** Confirm material compatibility by referring to the chemical resistance guide in the catalog or on the website. Santoprene® is beige; Versilon™ and Pellathane® are clear; FKM is black.
** Confirm material compatibility by referring to the chemical resistance guide in the catalog or on the website. Santoprene® is beige; Versilon™ and Pellathane® are clear; FKM is black.
44 www.stenner.com
PUMP TUBES
** Confirm material compatibility by referring to the chemical resistance guide in the catalog or on the website. Santoprene® is beige; Versilon™ and Pellathane® are clear; FKM is black.
Drive Assembly
46 www.stenner.com
ECON SERIES
PUMP HEAD PARTS
❷ ❸
INJECTION FITTINGS
Ferrule 6 mm
* Confirm material compatibility by referring to the chemical resistance guide in the catalog or on the website. Santoprene® is beige; Versilon™ and Pellathane® are clear; FKM is black.
48 www.stenner.com
MISCELLANEOUS PARTS SUCTION/DISCHARGE TUBING
Connecting Nut 1/4" Connecting Nut 3/8" Connecting Nut 3/8" Ferrule 1/4"
with Adapter
PART NUMBER UM DESCRIPTION Works with PART NUMBER UM DESCRIPTION Works with
UCAK100 10-PK Connecting Nut 1/4" All Pumps AK4002B ROLL 1/4" x 20' UV Black All Pumps
MCAK100 24-PK AK4002W ROLL 1/4" x 20' White
MANUT00 EA Connecting Nut 3/8" Classic / SVP AK4010B ROLL 1/4" x 100' UV Black
UCADPTR 2-PK Connecting Nut 3/8" Classic / SVP AK4010W ROLL 1/4" x 100' White
MCADPTR 5-PK with Adapter AK4100B ROLL 1/4" x 1000' UV Black
UCAK200 10-PK Ferrule 1/4" All Pumps AK4100W ROLL 1/4" x 1000' White
MCAK200 24-PK
MALT02B ROLL 3/8" x 20' UV Black Classic / SVP
ST114 EA Weighted Suction Line Strainer All Pumps
MALT002 ROLL 3/8" x 20' White
1/4"
MALT10B ROLL 3/8" x 100' UV Black
ST138 EA Weighted Suction Line Strainer Classic / SVP
3/8" MALT010 ROLL 3/8" x 100' White
MAGRE55 EA AquaShield 5.5 oz. Tube ®
All Pumps MALTB10 ROLL 3/8" x 1000' UV Black
AK600 EA Flow Indicator 1/4" with Bracket All Pumps MALT100 ROLL 3/8" x 1000' White
AK20W6M ROLL 6 mm x 20' White All Pumps
EUROPE
Classic / SVP
Strainer 6 mm
AK800 EA Flow Indicator 6 mm with Bracket Classic / SVP
Head Assembly
PART NUMBER UM DESCRIPTION
MX100 EA For all mixers
50 www.stenner.com
CHEMICAL RESISTANCE GUIDE
Ratings Key – Chemical Effect The information is provided ONLY as a guide to assist in determining chemical compatibility
A Fluid has minor or no effects for wetted components. Testing under the specific conditions of the application is recommended. Stenner Pump
Company assumes no responsibility for its accuracy. Outside factors including but not limited to temperature,
B Fluid has minor to moderate effects
pressure, mechanical stress, and solution concentration can affect material compatibility in a particular application.
C Fluid has severe effects Stenner makes no warranty, expressed or implied, as to the accuracy of this guide or any materials’ suitability for
* No data available fitness or purpose for any application. User assumes all risk and liability for use of this guide.
Chemical / Solution PP/Santoprene® Versilon™ PVC LDPE FKM Chemical / Solution PP/Santoprene® Versilon™ PVC LDPE FKM
52 www.stenner.com
POLICIES
Limited Warranty
Stenner Pump Company will for a period of one (1) year from the date of purchase (proof of
purchase required) repair or replace – at our option – all defective parts. Stenner is not
responsible for any removal or installation costs. Pump tube assemblies and rubber components
are considered perishable and are not covered in this warranty. Pump tube will be replaced each
time a pump is in for service, unless otherwise specified. The cost of the pump tube replacement
will be the responsibility of the customer. Stenner will incur shipping costs for warranty products
shipped from our factory in Jacksonville, Florida. Any tampering with major components, chemical
damage, faulty wiring, weather conditions, water damage, power surges, or products not used
with reasonable care and maintained in accordance with the instructions will void the warranty.
Stenner limits its liability solely to the cost of the original product. We make no other warranty
expressed or implied.
Returns
Stenner offers a 30-day return policy on factory direct purchases. Except as otherwise provided, no
merchandise will be accepted for return after 30 days from purchase. To return merchandise at any
time, call Stenner at 800.683.2378 for a Return Merchandise Authorization (RMA) number. A 15%
restocking fee will be applied. Include a copy of your invoice or packing slip with your return.
Disclaimer
This information is not intended for specific application purposes. Stenner Pump Company
reserves the right to make changes to prices, products, and specifications at any time without
prior notice
Trademarks
Santoprene®* is a registered trademark of Exxon Mobil Corporation.
Versilon™* is a registered trademark of Saint-Gobain Performance Plastics.
Pellathane®* is a registered trademark of The Dow Company.
AquaShield® is a registered trademark of Houghton International.
*
Refer to chemical resistance guide for compatibility.
INDEX
54 www.stenner.com
STENNER PUMP COMPANY
CATALOG 2016
021516