Professional Documents
Culture Documents
Waste Water Submersible Pumps - 50Hz SM, SH & DM Series
Waste Water Submersible Pumps - 50Hz SM, SH & DM Series
T H E B E G I N N I N G
of C.R.I., way back in 1961, was a resolute attempt to produce a few irrigation C O N T E N T S
equipments using the limited facilities of an in-house foundry. Eventually the
founder's dream was coming true as the small production unit he started kept
growing rapidly. Now, after more than five eventful decades, it is an enormous,
widely reputed organization, which produces more than 2300 varieties of PageNo.
perfectly engineered pumps and motors and sells its products in numerous Model identification Code 02
countries spread across 6 continents. General Information 03
C . R . I . I S O N E A M O N G SEWAGE PUMPS
the few pioneers in the world to produce 100% stainless steel submersible
SM & SH Series - Cast Iron Medium & Heavy Sewage Pumps
pumps. Having achieved a record production capacity of over 2 million
Specifications & M.O.C. 04
pumps per annum, today C.R.I. is rubbing its shoulders with the best brands
Cross Sectional Drawing 05
in the world, with advanced technology and safety standards as its hallmarks.
Performance Table 06
Performance Curves 07
T H E I N F R A S T R U C T U R E Dimensional Details 12
of C.R.I. is pretty comprehensive with state-of-the-art machineries and
SMC Series - Cast Iron Sewage Pump with cutter
high potential in-house R&D recognised by the ministry of science and
Specifications, M.O.C., Performance Table & Curves 13
technology, Govt. of India - all within its own covered area of 200,000 square
metres. The production environment is accredited with ISO 9001, ISO 14001
SMS Series - Stainless Steel Medium Sewage Pumps
& OSHAS 18001 certifications and the products are CE, UR/UL, TSE & ISI Specifications, M.O.C. 14
certified. The R&D team always stays in tune with the changing scenario Performance Table & Performance Curves 15
and seldom fails in coming up with outstanding solutions every time. Dimensional Details 18
Guide Rail System 19
N E E D L E S S T O S A Y , DRAINAGE PUMPS
behind this legendary growth lies the untiring, innovative, enthusiastic and
dedicated team work. And, of course, a flawlessly maintained value system DMS Series - Stainless Steel Drainage Pumps
too. The name C.R.I. itself encapsulates the company's ethos: ‘‘ Commitment, Specifications, M.O.C. & Performance Table 20
Reliability, Innovation’’. Performance Curves 21
Features
I International standard design I Auto cut I Silicon Carbide / Tungsten Carbide mechanical seal I SS I good quality and
Description
DMA - 2D - 60GT/4 : 6 kW - 3 Phase 4Pole, 4” outlet Medium Drainage Pump with Agitator & Open Double Channel Impeller. performance.
SMS - 5E - 75GT : 7.5 kW - 3 Phase 2Pole, 4” outlet Stainless steel Medium Sewage Pump with SS Closed Double Channel Impeller.
SH - 5E - 110ET : 110 kW - 3 Phase 2Pole, 2½” outlet Heavy Drainage Pump with Closed Double Channel Impeller.
Multiple impeller design to handle different sewage & waste water.
Full range from low head to high head, Compact & easy installation, Equipped with guide rail system.
Applications
I Draining sewage water from hotels, houses, commercial buildings complexes etc I Pumping waste water in industries
I Tunnel and mines I Pumping sewage water from stock farms & manhole sewer I Sewage treatment plants I Pumping
municipal sewage water I Septic tank I Leather factories I Aquaculture water supply and drainage I Dewatering in
construction sites I Water supply for agriculture irrigation, underground water pumping I Land scape and horiculture
irrigation I Pumping of water from rivers & lakes
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
Medium and Heavy Sewage Pumps - SM & SH Series Cross Sectional Drawing
4
MEDIUM & HEAVY SEWAGE PUMPS SM & SH SERIES 5
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
2900 RPM
H-(m)
H max Current
Model Power - P1 size in Passage Flow Head Eff. %
kW HP in m (kg)
(kW) inches (mm) (m3/h) (m) (A)
SM
-1
SH-1E-150ET 15 20 18.5 2½ 25 62.5 35 54.5 29 44 250 30
E-
40
DT
SM
-1E
SM- -55
1450 RPM 1E-3 DT
20 0DT
Power-P2 Input Outlet Solid Duty Point F.L. SM-
H max Weight 1E-2
Model Power-P1 size in Passage Current Eff. % 2DT
kW HP in m Flow Head (kg)
(kW) inches (mm) (m3/h) (m) (A)
10
SH-1E-75GT/4 7.5 10 9.5 4 35 21 80 18.5 15 54 126
SH-1E-75IT/4 7.5 10 9.5 6 35 16.5 100 10 15 38.5 160
SH-1E-110GT/4 11 15 13.8 4 35 28.5 100 23.5 22 72.6 230 0
SH-1E-110IT/4 11 15 13.8 6 45 21 130 18 22 70 250 0 5 10 15 20 25 30 35 40 45 50
H-(m)
SH-1E-185JT/4 18.5 25 22.5 8 55 27.5 250 18.5 36 66.5 349
SH-1E-220IT/4 22 30 26 6 45 33 180 27 42 66.23 360
SH-1E-220JT/4 22 30 26 8 50 33.5 350 17.5 42 59.73 364 50
0
0 5 10 15 20 25 30 35 40 45 50
Q-(m³/h)
*In view of continuous developments, the information / description / specifications / illustrations are subject to change without notice. Note : Performance curve are as per specific gravity and viscosity of water.
6
MEDIUM & HEAVY SEWAGE PUMPS SM & SH SERIES 7
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
H-(m)
40
60
30 50
SH
-1
40 E-
SM 15
-1E 0E
SM T
-40 -1
20 FT E-
55 30 SH SH
SM- FT SH-1E -1
1E- -75FT -1E E-
30F -75 11
T ET 0 ET
SM-1
E-22F 20 SH-1
T E-75G
10 T
10
0
0
0 10 20 30 40 50 60 70
Q-(m³/h) 0 10 20 30 40 50 60 70 80 90 100 110 120
Q-(m³/h)
H-(m)
H-(m)
50 50
40 40
30
30
SM
20 -1E
-55 20
GT
SM SH-1
-1E E-75
-40 SH-1E IT
10 SM-1E-30G GT -55IT
T
10
0
0 10 20 30 40 50 60 70 80 90 100 0
0 20 40 60 80 100 120 140 160 180 200
Q-(m³/h)
Q-(m³/h)
Note : Performance curve are as per specific gravity and viscosity of water. Note : Performance curve are as per specific gravity and viscosity of water.
8
MEDIUM & HEAVY SEWAGE PUMPS SM & SH SERIES 9
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
H-(m)
H-(m)
50 40
SH-
1E-3
00J
T/4
40 SH-1
30 E-37
0JT/
4
SH-1 SH
-1E
30 E-15 -18
0GT 5GT 20 SH SH
/4 /4 -1E
-18 -1
5JT E-
SH-1 /4 22
E-11 0J
0GT SH-1E T/
/4 -150JT 4
20 /4
SH-1 10
E-75
GT/4
10
0
0 50 100 150 200 250 300 350 400 450 500
Q-(m³/h)
0
0 20 40 60 80 100 120 140 160 180 200
Q-(m³/h)
25
H-(m)
50
20
40
15
SH
SH -1E
30 -1E -37
SH-1E-2 -37 0K
20IT/4 0IT T/4
/4 SH
-1E
SH- 10 -30
20 1E- SH- 0K
SH-1 185 1E-3 T/4
E-150 IT/4 00IT
IT/4 /4
SH
SH- -1E
1E-7 -11
5IT/ 0IT
10 4 /4 5
0
0 40 80 120 160 200 240 280 320 360 400 440 480 0
Q-(m³/h) 0 80 160 240 320 400 480 560 640 720 800
Q-(m³/h)
Note : Performance curve are as per specific gravity and viscosity of water. Note : Performance curve are as per specific gravity and viscosity of water.
10
MEDIUM & HEAVY SEWAGE PUMPS SM & SH SERIES 11
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
Dimensional Details - SM & SH Series Sewage Pump with Cutter - SMC Series
Specifications
Pump Type SMC Series
Power Range 1.1 - 1.85 kW
Speed 2900 rpm
1Ph, 230V, 50Hz
Versions 3Ph, 380V, 50Hz
Pole 2 Pole
Protection IP 68
H
L2 Insulation Class Class F
Direction of Rotation Clockwise viewed from driving end
Max. immersion depth 50 m
n - d1
D Max. liquid temperature 40OC
D1
Impeller Type Semi open multi channel
B
d
DN Outlet Size 2”
H1
L1 Meterials of Construction
L
Part Name Material
Pump Flange and elbow Weight
Model Handle SS 304
(kg)
L L1 L2 H H1 D D1 DN –d1 d Stator Housing Cast Iron
SM-1E-22DT 320 255 150 550 115 140 110 50 4-14 50 36 Pump Casing Cast Iron
SM-1E-22ET 325 255 155 560 120 160 130 65 4-14 65 36 Shaft SS 420
SM-1E-22FT 360 285 170 570 125 190 150 80 4-18 80 38 Mechanical Seal Silicon - Ceramic
Impeller Cast Iron
SM-1E-30DT 330 265 155 580 115 140 110 50 4-14 50 50
Cable Rubber
SM-1E-30ET 330 260 160 585 115 160 130 65 4-14 65 51
Bearing Housing Casted SS304
SM-1E-30FT 375 300 175 605 125 190 150 80 4-18 80 57
Cutter SS 400C
SM-1E-30GT 430 310 185 605 125 210 170 100 4-18 100 62
Oil Seal NBR
SM-1E-40DT 380 315 195 615 130 140 110 50 4-14 50 68
SM-1E-40ET 380 310 195 620 135 160 130 65 4-14 65 68
SM-1E-40FT 395 320 195 620 135 190 150 80 4-18 80 68 Performance Curves - SMC Series
SM-1E-40GT 460 340 205 655 155 210 170 100 4-18 100 70
SM-1E-55DT 380 315 195 645 135 140 110 50 4-14 50 83 Output : 2” 2900 rpm
H-(m)
30
SM-1E-55ET 390 320 210 650 155 160 130 65 4-14 65 85
SM-1E-55FT 395 320 195 650 135 190 150 80 4-18 80 85
SM-1E-55GT 460 340 205 685 155 210 170 100 4-18 100 85 25
SMC
SH-1E-75GT 505 385 250 725 185 210 170 100 4-18 100 138 -1M-
18DT
SH-1E-75IT 580 400 245 735 185 240 200 150 4-18 150 138 SMC-
20 1M-15
SH-1E-75FT - - 220 800 185 190 150 80 4-18 80 130 DT
SMC
SH-1E-110ET - - 310 920 165 190 150 80 4-18 80 230 -1M-
13DT
SMC-
SH-1E-150ET - - 310 935 170 160 130 65 4-14 65 250 15
1M-11
DT
SH-1E-75GT/4 - - 250 780 180 210 170 100 4-18 100 126
SH-1E-75IT/4 - - 195 810 195 240 200 150 4-18 150 160
SH-1E-110GT/4 - - 320 925 200 210 170 100 4-18 100 230 10
SH-1E-110IT/4 - - 350 1010 230 240 200 150 4-18 150 250
SH-1E-150GT/4 - - 320 965 200 210 170 100 4-18 100 260
5
SH-1E-150IT/4 - - 350 1040 230 240 200 150 4-18 150 272
SH-1E-150JT/4 - - 350 1065 245 320 280 200 8-18 200 271
SH-1E-185GT/4 - - 320 980 200 210 170 100 4-18 100 305 0
SH-1E-185IT/4 - - 390 1060 260 240 200 150 4-18 150 323 0 5 10 15 20 25
SH-1E-185JT/4 - - 350 1110 245 320 280 200 8-18 200 349 Q-(m³/h)
SH-1E-220IT/4 - - 390 1090 260 240 200 150 4-18 150 360 Performance Table
SH-1E-220JT/4 - - 350 1097 245 320 280 200 8-18 200 364
Power - P2 Outlet Max Max Duty Point
SH-1E-300IT/4 - - 400 1105 265 240 200 150 4-18 150 370
Model size Head Flow Flow Head
SH-1E-300JT/4 - - 360 1230 280 320 280 200 8-18 200 380 kW HP (mm) (m) (m3/h) (m3/h) (m)
SH-1E-300KT/4 - - 395 1150 275 375 335 250 12-18 250 600
SMC-1M-11DT 1.1 1.5 50 16.5 19 10 12.5
SH-1E-370IT/4 - - 400 1105 265 240 200 150 4-18 150 650
SMC-1M-13DT 1.3 1.8 50 18 20 10 14.5
SH-1E-370JT/4 - - 360 1230 280 320 280 200 8-18 200 509
SMC-1M-15DT 1.5 2 50 21 20 10 17
SH-1E-370KT/4 - - 395 1150 275 375 335 250 12-18 250 588
SMC-1M-18DT 1.85 2.5 50 23.5 20 10 19
*All dimensions are in mm
*In view of continuous developments, the information / description / specifications / illustrations are subject to change without notice. *In view of continuous developments, the information / description / specifications / illustrations are subject to change without notice.
12
MEDIUM & HEAVY SEWAGE PUMPS SMC SERIES 13
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
Specifications
Pump Type
Power Range
SMS Series
2.2 kW - 7.5 kW
Performance Curves
Speed 2900 rpm
Version 380V, 50Hz, 3Phase AC Supply
Insulation Class F 2” Outlet 2900 rpm
Degree of Protection IP68 60
H-(m)
Direction of Rotation Clockwise viewed from driving end
Max. Liquid temperature 40OC
Max. Ambient temperature 40OC
50
Permissible pH value 4~10
Impeller Type Closed Double Channel
Max. Solid Handling Capacity Upto 35 mm
SMS-
Pump Outlet Size 2”, 2½”, 3”, 4” & 6” 40 5E-75
DT
SMS
-5E-
40D
T
Meterials of Construction
30
Part Name Material SMS-5
E-30DT
Stator Housing Casted SS304
Rotor Shaft Casted SS304 SMS-
5E-22
Bearing Housing Cast Iron 20 DT
Pump Casing Casted SS304
Mechanical Seal VITON
Impeller Casted SS304
10
Oil Seal VITON
Bracket Casing Casted SS304
“O” Ring VITON
Cable Rubber 0
0 5 10 15 20 25 30 35 40 45 50
Q-(m³/h)
*In view of continuous developments, the information / description / specifications / illustrations are subject to change without notice. Note : Performance curve are as per specific gravity and viscosity of water.
14
S TA I N L E S S S T E E L M E D I U M S E W A G E P U M P S SMS SERIES 15
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
H-(m)
45
H-(m)
30
40
35
SMS-5E-7
5ET 25
30
SMS
25 -5E-4 20
0ET
SMS
SMS -5E
20 -5E-3 -30G
0ET T
SM
SMS 15 S-5
-5E-2 E-4 SMS
15 2ET 0G -5E-7
T 5GT
10 SMS
10 -5E-
22G
T
5
5
0
0 10 20 30 40 50 60 70 80 90
Q-(m³/h)
0
0 10 20 30 40 50 60 70 80 90 100 110 120
Q-(m³/h)
H-(m)
25
SMS
-5E-
75F
T
25
SMS
-5E-4
0FT
20
20
15 SMS
-5E
-30F
T
SMS-5E-22FT 15
10
SM
S-5
E-7
10 5IT
5
5
0
0
0 10 20 30 40 50 60 70 80 90 0 20 40 60 80 100 120 140 160 180 200
Q-(m³/h)
Q-(m³/h)
Note : Performance curve are as per specific gravity and viscosity of water. Note : Performance curve are as per specific gravity and viscosity of water.
16
S TA I N L E S S S T E E L M E D I U M S E W A G E P U M P S SMS SERIES 17
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
Dimensional details
H GUIDE RAIL SYSTEM
n-d1
D
D1
B
DN
C.R.I. Guide Rail System consists of a base elbow, guide rails, top bracket, sliding hook & chains.
H1
L1
L Features
L2 Guide Rail System is used for easy & handle free installation. Further this helps for raising / lowering the pump quickly &
conveniently for maintenance without entering the sump and without disturbing the pipe connections..
Applications
Waste water pumping stations where the pumps are subject to regular maintenance & inspection such as Effluent
Pump Flange and elbow Weight
Model Treatment Plants (ETP), Sewage Treatment Plants (STP) & Sewage Pits.
(kg)
L L1 L2 B H H1 D D1 DN n-d1 d
* All our Medium & Heavy Sewage pump can be supplied with guide rail system.
SMS-5E-22DT 340 262 154 216 543 112 140 110 50 4-14 50 36.1
SMS-5E-22ET 358 276 166 220 543 114 160 130 65 4-14 65 38.3
SMS-5E-22FT
SMS-5E-22GT
381
417
279
297
166
176
226
242
549
565
117
125
190
210
150
170
80
100
4-18
4-18 100
76 40.8
43.2
Auto - Coupling Installation
SMS-5E-30DT 359 281 164 234 561 112 140 110 50 4-14 50 40
SMS-5E-30ET 367 285 166 238 565 114 160 130 65 4-14 65 41.8
SMS-5E-30FT 381 279 166 226 574 117 190 150 80 4-18 76 44.3
SMS-5E-30GT 417 297 176 242 590 125 210 170 100 4-18 100 47
SMS-5E-40DT 359 281 164 234 586 112 140 110 50 4-14 50 39.8
SMS-5E-40ET 367 285 166 238 590 114 160 130 65 4-14 65 45.6
SMS-5E-40FT 381 279 166 226 599 117 190 150 80 4-18 76 47.8
SMS-5E-40GT 417 297 176 242 615 125 210 170 100 4-18 100 51
SMS-5E-75DT 394 316 184 264 679 118 140 110 50 4-14 50 71
SMS-5E-75ET 417 333 196 274 693 125 160 130 65 4-14 65 72.7
SMS-5E-75FT 441 337 196 282 701 129 190 150 80 4-18 76 75.4
SMS-5E-75GT 464 342 196 292 711 134 210 170 100 4-18 100 77.3
SMS-5E-75IT 521 373 220 306 726 142 265 225 150 8-18 150 88
18
S TA I N L E S S S T E E L M E D I U M S E W A G E P U M P S GUIDE RAIL SYSTEM 19
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
H - (m)
Power Range 2.2 - 7.5 kW
45
Speed 2900 rpm
Versions 1Ph 230V, 50Hz
3Ph, 380V, 50Hz 40 DM
S-5
Pole 2 Pole E-4
0ET
Protection IP 68 35
Insulation Class Class F
Max. immersion depth 5m
30 DMS
Max. liquid temperature 40OC -5E-4
0FT
Impeller Type Closed Double Channel DM
25 S-
5E
- 22
ET
Meterials of Construction 20
Pump Name Material
Outer Casing SS 304 15
Pump Casing SS 304
Shaft SS 420
10
Mechanical Seal Carbon - Ceramic
Impeller SS 304
Cable H07RN-F 5
Handle Stainless Steel
Strainer SS 304
0
0 10 20 30 40 50 60 70
Q - (m³/h)
Performance Table
Power - P2 Outlet Max Max Duty Point 3” & 4” Outlet 2900 rpm
Weight
Model size Head Flow Flow Head 24
kW HP (kg)
(mm) (m) (m3/h) (m3/h) (m)
H - (m)
DMS-5E-22ET 2.2 3 65 30 33 15 25 28
DMS-5E-22GT 2.2 3 100 10 78 65 7 29 DM
20 S-5
DMS-5E-30FT 3 4 80 20 48 40 16 42 E-3
DMS-5E-30GT 3 4 100 13 78 65 10 33 0F
T
DMS-5E-40ET 4 5.5 65 40 50 20 35 47
DMS-5E-40FT 4 5.5 80 25 70 40 21 39
16
DMS-5E-55HT 5.5 7.5 120 15 120 100 12 85
DMS-5E-75IT 7.5 10 150 15 180 160 11 106
DMS-5
E-30GT
12
DMS-5
E-22GT
0
0 25 50 75 100 125
Q - (m³/h)
*In view of continuous developments, the information / description / specifications / illustrations are subject to change without notice. Note : Performance curve are as per specific gravity and viscosity of water.
20
S TA I N L E S S S T E E L D R A I N A G E P U M P S DMS SERIES 21
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
H - (m)
Speed 2900 rpm 2900 rpm
Versions 3Ph, 380V, 50Hz 1Ph, 230V, 50Hz
25
3Ph, 380V, 50Hz
Pole 2 Pole 2 Pole
20 Protection IP 68 IP 68
Insulation Class Class F Class F
15 Max. immersion depth 50m Upto 0.75 kW : 10m
DM
S-5 1.5 to 5.5 kW : 50m
E-5
5HT
Max. liquid temperature 40OC 40OC DM - 2M Series
10
Impeller Type Semi open multi channel Semi open multi channel
Solid Handling Capacity Upto 11.5 mm Upto 8.5mm
5 Outlet Size 2”, 3”, 4” & 6” 2”, 3” & 4”
Meterials of Construction
0
0 20 40 60 80 100 120 140 160 180 Pump Type DM - 1M Series DM - 2M Series
Q - (m³/h) Motor Body Cast Iron SS 304
Pump Casing Cast Iron Cast Iron
Shaft SS 420 SS 420
Mechanical Seal SiC - SiC SiC-SiC / Carbon - Ceramic
Impeller Cast Iron Cast Iron
Cable 2PNCT-F H07RN - F
Strainer Mild Steel SS 304
Hose Coupler Cast Iron ABS / SS 304 DM - 1M Series
Performance Table - DM-2M Series (*All DM-2M Models are supplied with float options)
6” Outlet 2900 rpm Max. Duty Point Dimensions (mm)
Power - P2 Outlet
24 Solid Max Max Weight
Model size Flow Head
kW HP Passage Head Flow Height OD (kg)
H - (m)
22
S TA I N L E S S S T E E L D R A I N A G E P U M P S DM SERIES 23
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
H - (m)
H - (m)
30
DM
-2 20
M
-3
7D
T
/D
M
-1
M
-3
DM
7D
20 T DM
-2M
DM -2
M
-22
-2 -5
M 5G
DT
-3
7G T
/D
/D
DM T
-2 10 /D M
M-
M M -1
M
1M
-1 -1
5D M -5
-3
-22
T 5G
/D 7G T
DT
10 M T
-1
M
-1
5D
T
0
0 10 20 30 40 50 60 70 80 90 100
0
0 10 20 30 Q - m³/h
Q - m³/h
H - (m)
H - (m)
DM
-1M
-150
GT
50
DM
-1
30 M
-1
10
GT
40
20
DM
30
D
-2
M
M
-2
DM
-5
M
5F
-3
-2
7-
DM M
-2
FT
/D
-2 2F
M
/D
M- T 20
-1
/D
M
15
DM
M
DM
-1
FT M
-5
10 DM
M
-1
-1M
5F
/D DM
-1M
-1M
-3
M- M
T
-2 -1M
7F
-75
-15
1M 2F
-75
IT
T
-1 T -11
IT
0IT
5F 10
GT
T
0
0 10 20 30 40 50 60 70 0
0 20 40 60 80 100 120 140 160
Q - m³/h Q - m³/h
Note : Performance curve are as per specific gravity and viscosity of water. Note : Performance curve are as per specific gravity and viscosity of water.
24
SUBMERSIBLE DRAINAGE PUMPS DM SERIES 25
COMMITMENT RELIABILITY INNOVATION Pumping trust. Worldwide.
Cut Sectional Drawing - DM - 1M Series SUBMERSIBLE SLURRY PUMPS - DMA SERIES (With Agitator)
1
Specifications
2 Item No. Part Name Pump Type DMA Series
17
1 Handle Power Range 4 - 9 kW
3 2 Cable
16 Speed 1450 rpm
4 3 Bearing Versions 3Ph, 380V, 50Hz
15 4 Shaft Pole 4 Pole
5 5 Rotor Protection IP 68
6 6 Stator Insulation Class Class F
7 Oil Max. immersion depth 30m
14 3 8 Impeller Max. liquid temperature 40OC
7 9 Pump Casing Impeller Type Semi open multi channel
13 10 Base Plate Solid Handling Capacity Upto 30 mm
11 Filter Strainer Outlet Size 3”, 4” & 6”
12 12 Oil seal bracket
8
13 Mechanical seal Meterials of Construction
9
14 Motor body
15 Upper cover Part Name Material
11 16 Motor protector Motor Body Cast Iron
17 Hose couples Pump Casing Cast Iron
10 Shaft SS 420
Mechanical Seal SiC - SiC
Impeller Cast Iron
Performance Table
Power - P2 Outlet Max Max Duty Point
Max.Solid
Model size Head Flow Flow Head
kW HP (mm)
(inches) (m) (m3/h) (m3/h) (m)
DMA-1M-40FT/4 4 5.5 3 30 14.8 100 50 11
DMA-1M-60GT/4 6 8 4 30 16.9 150 75 11
DMA-1M-90IT/4 9 12 6 30 21.5 170 100 15
H
B
Performance Curves
3”, 4” & 6” Outlet 1450 rpm
D
C.W.L 26
H-(m)
W1
A1
A
20
Model d A A1 B D H W1
DM-1M-15DT 50 235 173 517 216 486 120
DM-1M-15FT 80 235 173 517 216 486 120
DM-1M-21DT 50 235 173 517 216 486 120
DM
DM-1M-22FT 80 235 173 517 216 486 120 10 DM
A-
DM-1M-37DT 50 283 208 628 252 638 150 A-
1M
DM
1M
DM-1M-37FT 80 283 208 628 252 638 150 -6
-9
A-
0G
0I
1M
DM-1M-37GT 100 283 208 642 252 638 150 T/
T
4
/4
-4
0F
DM-1M-55FT 80 306 218 671 259 688 150
T/
DM-1M-55GT 100 306 218 686 259 688 150
4
DM-1M-75GT 100 330 240 764 314 676 190
DM-1M-110GT 100 373 255 807 350 695 190
0
DM-1M-75IT 150 330 240 790 314 676 190 0 60 120 180
DM-1M-110IT 150 373 255 807 350 695 190 Q-(m³/h)
*In view of continuous developments, the information / description / specifications / illustrations are subject to change without notice. Note : Performance curve are as per specific gravity and viscosity of water.
26
SUBMERSIBLE DRAINAGE PUMPS DMA SERIES 27
COMMITMENT RELIABILITY INNOVATION
2
17
3
1 4
5
15 Part No. Name
6 1 Handle
3 2 Cable
3 Bearing
16 4 Shaft
20
13
5 Rotor W I N N I N G W A Y S
14 6 Stator
7 Lube Oil
8 Impeller
9 Pump Casing When you have a good thing going it is quite
10 Base Plate
7 11 Strainer
12 Oil Seal Bracket
in the fitting of things that recognitions come
12 13 Mechanical Seal
9 14 Motor Body
8
15 Upper Housing
16 Motor protection our way. Several prestigious awards, which
18
17 Hose Coupler
11 10 18 Suction plate
19 Agitator decorate our shelf, say it all. These rewards
19 20 Bearing Housing
B1
C.W.L.
A1
A
W1
Model d A A1 B B1 D H W1
*In view of continuous developments, the information / description / specifications / illustrations are subject to change without notice.
28
SUBMERSIBLE SLURRY PUMPS