Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PRINCIPAL USES: Use

BOYSEN® Wallguard™ as an

BOYSEN
exterior finish for newly

constructed building as well

WALLGUARD as repainting old structures.

BOYSEN® Wallguard™ Dirt


PRACTICAL COVERAGE:

Resisting Latex #5715 is suitable


25 - 30 square meter / 4

to be used near industrial areas


liters /coat
and along highways. It is

BOYSEN®
specially suited for repainting

SURFACE DRY: Thirty (30)

Wallguard™
medium and high-rise building
minutes
DRY FILM THICKNESS: 1.5

Dirt Resisting
where the need to maintain a

freshly painted look with less


mils /coat
Latex maintenance is of prime
OVERCOATING INTERVAL:

importance. Allow one hour before

Introducing a new breed of


recoating.
Highly Resistant to airborne pollutants
latex paints that has a very
THINNING: Use as supplied.

and dust, 100% Acrylic, Highly alkaline


high resistance to dirt, dust,
resistant, Resist fading, cracking and If necessary, thin with not

smog and mildew. It can be


peeling, Good exterior durability, more than ½ liter of water per

painted even in a rigorous


Excellent gloss retention, Mildew 4-liter can
environment where there is
resistant, Good block and scrub APPLICATION: paint brush,

a very high concentration of


resistance roller or airless spray
airborne pollutants. PACKAGING: 4-liter cans

CONTACT US:
HOTLINE:
8364-9999
SURFACE
Repainting: Note:
PREPARATION: Remove all loose, scaling, flaking

and peeling off paint using

COLORANTS: Use only

New Masonry: BOYSEN® Paint and Varnish


BOYSEN® Latex Colors for

Allow new masonry to dry for 14 to


Remover #141, wire brushing,
tinting to achieve pastel

28 days under normal weather


scraping, or water blasting. Let it

conditions before painting. Surface


shades. To produce dark

dry. Sand smooth painted surfaces

to be painted should be clean and


for improved adhesion. In case of
shades, use factory mixed

dry, free from oil, grease, dust, dirt,


mildew infestation, treat with
colors.
contaminants, and all loose grit
BOYSEN® Fungicidal Wash

and mortar. Treat new masonry


Solution #74 or bleach solution (1:3, PAINTING SCHEDULE:
with a solution of 1 part BOYSEN®
laundry bleach to water,
New Painting:
Masonry Neutralizer #44 diluted in
1st coat: BOYSEN® Acrytex™

respectively) by swabbing or
Primer #1705
16 parts water, applying liberally by
brushing. To ensure proper
Putty: BOYSEN® Acrytex™ Cast

brush or roller. Let dry overnight


treatment, allow to stand on
#1711
2nd & 3rd coat: BOYSEN®

before rinsing with water to


surface for overnight before
Wallguard™ Dirt Resisting Latex
remove white crystals that form on
washing off residue. Let dry. Repainting:
the surface. Let dry before
Topcoat: Apply two coats of

painting. BOYSEN® Wallguard™ Dirt

Resisting Latex on properly

prepared surface.

Main Office:
67 Mauban Street corner
Matutum Street, Barangay
Manresa Quezon City
Telephone Numbers:
8364-3505 to 09
8365-0561 to 64
Fax Numbers:
8367-8881
8361-7164
Email Address:
inquiry@boysen.com.ph

You might also like