Professional Documents
Culture Documents
Diagrama Eléctrico Controlador Temporizador
Diagrama Eléctrico Controlador Temporizador
Application
OFF OFF
TS-GM1 Timer controls any electrical installation by means of daily ON ON
Manual Index
programs. OFF OFF
mode
Installation ON
OFF
The timer must be installed and assembled by an authorized Hour Update light Programming dial
installer. They should be installed in switchboard cabinets made of
Turn the dial till the index to the current time.
35 mm symmetric sections in accordance with EN 50022.
The timer is protected internally against interference by a safety Manual Mode
device. However, particularly strong electromagnetic fields may =Automatic funtioning Wiring Diagram:
2 Positions:
alter its operation. I=Permanent connection L 1
N
Such interference can be avoided by adhering to the following L
Load
·The device should not be installed near inductive loads (motors, MCB
filter if necessary).
D
A
Power reserve(QRD,QRS): 100hours B
AC380V
·Inductive loads should be equipped with interference Load
Type of dial: Daily:96 pins C
suppressors (varistor, RC filter).
L
N KM
Timer TOSUN(Germany)GmbH
Made in China
01 02 03