Professional Documents
Culture Documents
Nathdwara-Nathdwara Town PROJECT Box Tunnel: Main Geometry of Single Cell Box
Nathdwara-Nathdwara Town PROJECT Box Tunnel: Main Geometry of Single Cell Box
Nathdwara-Nathdwara Town PROJECT Box Tunnel: Main Geometry of Single Cell Box
Box Tunnel
SOIL PROPERTIES
Angle of internal friction ( ) = 35.000 Degree
Angle of wall friction ( ) = 11.667 Degree
Slope of wall with respect to verti = 0.000 Degree
Slope of earth fill ( i ) = 0.000 Degree
CALCULATION OF Ka
Value Of DEGREE RADIAN
= 35.000 0.6
= 11.7 0.2
= 0.000 0
= 0.000 0
Ka= cos2( )
2 1/2 2
cos x cos( )x[1+{sin()xsin()/cos()xcos()} ]
Ka= 0.251
G.L
0.7 m
7 m
0.7 0.7
7.5 m
0.7 m
2 2 3 Red Nodes
Blue Members
8.2 m
1 3
1 4
7.7 m
NOTE :- Provide springs in the base as
1. At corners
2. At the pts of faces of walls.
3. Distance between remaining nodes = 0.875 m 0.875
2
S.B.C for design = 20 Mt/m
Assume settlement below foundation = 25 mm
2
Therefore Mod. Of subgrade rxn 'K' = 2000 Mt/m /m
Spring constant = Force req. to cause unit deflection.
Spring constant Kfy = K x A
Generally Kfx = 0.5 Kfy
Area 'A' = (Half distance on either side of spring) x (width)
And width is kept as 1m.
section for top member for bending moment 0.045 0.955 ** values in blues are the fractional
length of the member
section for side member for bending moment 0.043 0.957