Professional Documents
Culture Documents
CA-DQP (X) Series: Instruction Manual
CA-DQP (X) Series: Instruction Manual
1
LED Products Connecting the Illumination Unit to an
The degree of risk of this product is shown below. Illumination Expansion Unit and a
24 VDC Power Supply
Product name Model LED color Degree of risk*
Pattern Projection • When you connect or disconnect this unit to or
CA-DQPX White Risk group 1
Light from other device, make sure to first power off both
* The degrees of risk of LED illuminations are classified as shown below this unit (CA-DQP25X*) and the other device.
according to IEC 62471 (JIS C 7550). Failure to do so may result in malfunction of this
• Exempt group Objects that do not cause any unit and the other device
photobiological injury.
NOTICE • Align the cable's round connector with the notch,
• Risk group 1 (low risk) Objects that do not cause injury that
insert the connector all the way to the back, and
makes constraints on normal actions
necessary. then completely tighten the fixing ring to connect
• Risk group 2 (moderate risk) Objects that do not cause injury the connector. An incomplete connection may lead
accompanied by unpleasant feelings and to illumination malfunctions and defective
thermal discomfort. operation.
• Risk group 3 (high risk) Objects that cause injury even due to
temporary or short-term exposure. * For the CA-DQP12X, connecting to a 24 VDC power supply is not needed
because power is supplied to it through the LED illumination cable.
FCC Regulations
This product complies with the following regulations specified LED illumination cable
by the FCC. Power cable with connector
• Applicable regulation: FCC Part 15 Subpart B Class A
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1)This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
• FCC CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Use the following cable (not supplied) as power
Reference
Checking the Package Contents cable with connector:
OP-88356 Power Cable (2 m)/OP-88357 Power Cable
This product includes the following items. Make sure that all of (5m)/OP-88358 Power Cable (10 m)
the items are in the package.
Connecting an LED Illumination Cable to the
Illumination Unit
CA-DQP12X/CA-DQP25X...One of these items Illumination Expansion Unit
Instruction Manual (this document) Connect the LED illumination cable to the corresponding
connector on the illumination expansion unit.
2
Connecting the Power Cable with Connector to a You can also perform installation using the four through holes
(4×Ø9) provided in the four corners of the unit.
24 VDC Power Supply (CA-DQP25X Only*) In this case, use metal fittings of such shape that they do not
interfere with lighting elements while they support this unit by all
Connect the power cable with connector (not supplied) to a 24
the attachment areas around the through-holes indicated
VDC power supply.
below.
* For the CA-DQP12X, connecting to a 24 VDC power supply is not needed
because power is supplied to it through the LED illumination cable.
.4
Power cable with connector Terminal block of CA-U5 Compact
11
(not supplied) Switching Power Supply
(electric wire: AWG16 or equivalent)
ø9
Core wire coating color
52
24 VDC Brown +24 V
DC output terminal + R2
0V Blue +24 V
0V
DC output terminal –
0V
3
Dimensions WARRANTIES AND DISCLAIMERS
(1) KEYENCE warrants the Products to be free of defects in materials and
CA-DQP12X workmanship for a period of one (1) year from the date of shipment. If any
models or samples were shown to Buyer, such models or samples were
used merely to illustrate the general type and quality of the Products and
not to represent that the Products would necessarily conform to said
models or samples. Any Products found to be defective must be shipped to
KEYENCE with all shipping costs paid by Buyer or offered to KEYENCE
for inspection and examination. Upon examination by KEYENCE,
KEYENCE, at its sole option, will refund the purchase price of, or repair or
replace at no charge any Products found to be defective. This warranty
166
115
does not apply to any defects resulting from any action of Buyer, including
but not limited to improper installation, improper interfacing, improper
repair, unauthorized modification, misapplication and mishandling, such as
4xM4, Depth: exposure to excessive current, heat, coldness, moisture, vibration or
6 max. outdoors air. Components which wear are not warranted.
115
(2) KEYENCE is pleased to offer suggestions on the use of its various
166
Products. They are only suggestions, and it is Buyer's responsibility to
ascertain the fitness of the Products for Buyer’s intended use. KEYENCE
will not be responsible for any damages that may result from the use of the
50
Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are
not to be used internally in humans, for human transportation, as safety
55.6
48.8
4xø9
115.2
150
278
309
KEYENCE CORPORATION
1-3-14, Higashi-Nakajima, Higashi-Yodogawa-ku,
Osaka, 533-8555, Japan
93 PHONE: +81-6-6379-2211
AUSTRIA HONG KONG NETHERLANDS TAIWAN
Ph: +43 2236 378266 0 Ph: +852-3104-1010 Ph: +31 40 20 66 100 Ph: +886-2-2721-8080
72.25
72.8
10.7