6 AgeRE RB]
AQG. 6. il a0 ae
Reale a
I
Ra, ERAS
=Abie
AMnnWazeMe spc-oo7T=3A
:0M= 0. 4
a
wteece
ara, b
gaa
arEeE
HGRGRSSTE (385)
zmpit.s
Lan YRBS TS
|
Tidi2e-—q|
[P= 2ay9) F(R) favsc-t, 10.4]
Sarre
Tiol28—d|
[7—Aay99 b (i) feresea-t 10,
sa x7%
T10152-¢|
ayo o F(R) leriset-t, 10.4)
Sa xy%
Ti0104-0|
lave b (ia)
Sot 7 HA
Ti0103
Aa 9y7
WIN TX ¥]
Tse54-1
ep ey
FA|ABS 948]
ae
(ERES| BES
ue
icc
Be
7-
RBRDPEYIY ID
al
Al o92 11 11 pmuieH
1982 04
BHRE
EB 992 11
10
BG RB1992 11
11 Be
H/1
LAF RRIRRASH
ae
T5922-AAAB= 4
S 4B
Aa SPECIFICATION] DATIE UNCONTROLLED CORY.
14-Dec=95
sPC-0077
Page (1/2)
1 Application
‘This specifications apply to the pin jack Ass’y.Z\
2Electrical characteristic
No. Item T ‘Condition Standard
2-1 [Dielectric strength Between isolated electrical conductors [No deformation
Iwith AC S00V for tminute or AC 600V _|No breakege
for 1 second.
‘2-2 _|insulation resistance |Between Isolated electrical conductors [More than TOMS
|with S00V DC.
2-8 |Contact resistance [Between the center pin of pin plug and [Below 10m ~
ithe contact with TkHz and 100mA,
13. Mechanical characteristic
No. Tem Condition Standard
3-1 [Insertion of the plug [Using mating plug (specified in EIA [Below 20.4N(Gkef)
C5231),
‘3-2 [Retention of the plug [Using mating plug (specified in EIA |2.94~29.4N(03~3ka))
RO5231),
3-3 Tightening strength of |When torque with etatle torque of 785 [Must not be damage the body.
self tapping screw | x 10"Nm(8kgfem) using the self tapping |The tested sample shall be withstood
‘screw of M3 % 10 length B type that is |without slipping the thread of the
| [specified by JIS and thru a hole of |_| mounting hole,
imounting chassis thickness 1 mm.
3-4 Life of product [The sample for insertion and pull out of [Shall be satisfied,
ithe mating plug for 100 times. '2-8(contact resistance),
'3-1(insertion of the plug),
'3-2(retetion of the plug.
[Most not be capable of removing the
terminal
|4 Whether proof characteristic
No. Item Condition ‘Standard
4-1 [Rumiaity [The sample of products kept in the | The appearance of tested
chamber having humidity 99~ 95%
‘temperature 602°C for 96 hours
then the sample take out from
chamber and except water drop from
ithe face of the production, then
‘expose to the normal condition for
30 minutes.
|sample not have damage.
'shall be satified,
'2-1(Dielectric strength).
Insulation resistance
[More than 10MQ
A ‘Odegiri_| Fujiwara Item 6 addition
A 2 Odagiri | Fujiwara |The overall revision.
* Matsuzawa | Odagiri | Fujiwara |The overall revision
MARIC REVISER | CHECKED | APPROVED REVISION RECORD
14-Dec-95 |__I4-Deen95_| specification
a Ono PProved by! V Kurahashi umber | _SPC-0077
EMUDEN CORPORATION 4Ce = 2
SPECIFICATION| DATE LiconTRoweD cony
14-Dec-95
sPC-0077
Page (2/2)
No. Item | Condition ‘Standard
4-2. |Heat edietence |The sariple of products kept the |The sppearance of tasted aarple not
Jchember heving temperature 702:2°C have damage of itself end these parts
lfor 24 hours then the sample expose fare mounted have not deterioration of
tothe normal condition for 30 minutes. mecharical characteristics.
43 Temperature cycle [The test subject for 5 times to eample |The appearance of tested sample |
ofthe products then those sample |rot have damage
exposed to the normal condo for
T hour
condition | temperature™G)_| tine (ninutea)
Not a) 20
Nez 5x85 10~15
Noa exe 30
Not 05 re
r I
5,Other
No. Item Condition 1 Standard
‘6-1 [Ammonia 'The sample of production hang up a= |Metal parte oF sample of products
[not dip in the solution into vessel of |shall not have crack.
about 800cc having ammonia and water |
ot 1000pom, then a vessel in enclosed ||
lbtieen ambient ai then tis keep in|
| chamber temperature 40:22°C for 24 |
houre {
$2 [Solderna When dip the igs of product into the | The lg dal be Soatng_ tore then
soldering beth having tompersture 220°C|00% of outside of tet by solder.
| for 3:£0.5 seconds. The appearance of tested sample not
| as damage.
3-3 Heat resistance for [The carole mounted on the POB |The appearance ofteoted camel nat
solder
{through on the soldering bath having
‘temperature 260: 10°C for 10 seconds,
lor itis torched to metal parts with
soldering iron having temperature 350+
10°C for 3 sechnds.
Ihave damage.
6, Notes on solvent, medicine, and oil
A
Plastic may be eroded by solvent, medicine, and oil I it was exposed to the volatile
adhesion, functionality and performance degradation, cracks easily and melts.
Please note preservation and the produced environment.
TDS ieee ee
8 Ono APPFOWE OY! Vikuehaahi__|mumber” | SPC-0077
EMUDEN CORPORATION 12h/ ARTES T AE
as
sas oat
aoe a |e |e
xa | 300 | 450 | 300
BRI“ Labed
OBO
EAE (Customer name) 1/1 HHH(Carton No)
BEREB (Customer tio) — RPO
HALES (Proauct No) BE (Name of product)
30K_X 20K = KOK HEE (Guanty)
TAF RRL YH (Lot No) xewaneto