Professional Documents
Culture Documents
Features: Tenda Power Tdpower Ta5 WXDX Series Ac-Dc Power Supplies
Features: Tenda Power Tdpower Ta5 WXDX Series Ac-Dc Power Supplies
Features
ÿWide voltage input 85ÿ265VAC, 100ÿ370VDC, 47ÿ400Hz
ÿNo-load power consumption is as low as 0.1W, and full-load efficiency ranges from 72% to 80%
ÿWhen the two-way isolated output is used, the isolation voltage between the two-way output is greater than or equal to 1000VDC
ÿCE-EMC: B-E191227380
ÿCE-LVD: B-E191227381
Scope of application
ÿTA5 WxDx series power supply is an ultra-small volume AC and DC dual-purpose power supply module, the input range is 85ÿ265VAC, 100ÿ370VDC, the full load output can meet the maximum 5W,
The typical output ripple of the main circuit is 30mV; the no-load power consumption is as low as 0.1W, and the efficiency range is 72% to 80%;
Working temperature -40ÿÿ+85ÿ; input under-voltage protection, over-current protection, output short-circuit protection self-recovery.
ÿThis series is widely used in the Internet of Things, AI equipment, smart city, instrumentation, electricity, industrial control, office and civil industries.
ÿWhen the application has higher electromagnetic compatibility requirements, please refer to the EMC peripheral application circuit of this series of products.
Input characteristics
project instruction
Input voltage range Input 85ÿ265VAC, can resist 280VAC voltage shock for a short time
Output characteristics
project instruction
Vo1ÿ±2%
Output Voltage Accuracy
Vo2: "E" regulated version ÿ ±2%, "V" unregulated version ÿ ±5%
General characteristics of Tenda power supply TA5 WxDx Series AC-DC Power Supplies
TDPOWER
project instruction
isolation voltage ÿ2500VAC, isolation voltage between two isolated outputs ÿ1000VDC
EMC characteristics
Note 1: The maximum load capacity refers to the maximum load capacity of the main road.
Note 2: Ripple noise index refers to the maximum ripple noise of the main circuit output.
Remark 3: WEDI: "E" refers to the second regulated output, the output voltage accuracy is ÿ±2%, the output current is 100mA, and the output ripple noise is less than 5mV.
Note 4: WVDI: "V" refers to the second unregulated output, the voltage accuracy is ÿ±5%, the output current is 200mA, and an additional 100UF aluminum capacitor is required to reduce the output ripple noise to about 30mV
Note 5: If the above output voltage does not meet the requirements, please contact our sales department to customize the requirements.
Tel:010-82967628 WWW.TDPOWER.CN
Beijing Evergrande Tengda Technology Co., Ltd. Page 3 of 5
Machine Translated by Google
MOV is a piezoresistor, LDM is a differential mode electrical LCM is a common mode 105K/50V
TAS5-12-WEDT CX is a safety capacitor, NXA220uF/25V P6KE15A
T1A/250V Recommended value sense, the recommended value is sense, the recommended value is Y2:102M/250VAC (Sanhe tiles
TAS5-15-WEDT 104K/275~310VAC NXA220uF/25V P6KE18A
HEL10D471K 47UH 10mH capacitance)
element
FUSE MOV CX LCM C1 C2ÿC4 C3 C5
Product number
TAD5-0503-WxDI
HEL10D471K C 10mH
Tel:010-82967628 WWW.TDPOWER.CN
Beijing Evergrande Tengda Technology Co., Ltd. Page 4 of 5
Machine Translated by Google
Weight information: about 15g/piece, the gross weight is about 1Kg per box, and the gross weight is about 15Kg per box.