Professional Documents
Culture Documents
staubli 枪头-法国
staubli 枪头-法国
NGV 1 Design
High flow receptacles and nozzles
Standard flow receptacles and nozzles
Safe design
Quick refuelling
■ Fleets
■ Self - serve
2
High flow type 1 nozzle :
GMV 09 for quick refuelling of heavy duty vehicles as
well as light duty vehicles from one dispenser
(bus refuelling within 3 minutes*)
Our experience pages 4 to 5
as a manufacturer Type 2 - 3 nozzles :
CMV 08 for time fill (or fast fill)
allows us to develop
pages 6 to 7
a complete range Stainless steel NGV 1 profile receptacles :
of NGV 1 compatible GMV 08 / C : for refuelling of light and heavy duty vehicles
page 8
products for the
GMV 09 : for refuelling of heavy duty vehicles
refuelling of all kinds page 9
In line Break-away :
of Compressed
BRW 02 : for time fill
Natural Gas BRW 08 : for fast and time fill
vehicles in a safe Security system between refuelling station and vehicle
page 10
environment.
Vehicle Check valve :
GMV 08 / C : for refuelling of light duty vehicles
GMV 09 : for refuelling of heavy duty vehicles
page 11
Refuelling lines ready to use
pages 12 to 13
Average filling flow of the NGV range
page 14
( * ) When using high flow nozzle and receptacle GMV 09 STÄUBLI
( 260 gallons (1000 l) at 3000 psi (200 bars) ).
Break-away
BRW 08
STÄUBLI products should be used in compliance with applicable federal, state and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility
with the environment and materials to be handled. You must check the regulations applicable to the country where the product will be in use and make your selection accordingly.
3
High flow type 1 nozzle,
for all types of compressed NGV’s
Applications
● Self serve applications.
● For quick refuelling of heavy duty
vehicles as well as light duty
vehicles from one dispenser
(bus refuelling within 3 minutes *)
in conjunction with STÄUBLI
high flow NGV 1 Receptacle ■ NGV 1 compatible
(GMV 09).
■ High flow in conjunction with
STÄUBLI NGV 1 receptacle
LING *
EFUEL
BUS R 3 MINUTES
WITHIN
4
FEATURES BENEFITS
Stäubli new high flow design • Fast refuelling : 260 gallons (1000 l)
at 3000 psi (200 bars) under 3 minutes
Technical data • Designed to refill high volume tanks
Internal diameter : 3/8” (9 mm). (busses, heavy duty trucks)
Flow area : 0.098 sq. in. (63 sq. mm).
Complies with NGV 1 standard • Can be used with any type of vehicles
Service pressures (heavy or compact) equipped with a
(connected and disconnected) : NGV 1 receptacle
3000 psi (200 bars)
Protected operating trigger • Excellent resistance against shock,
3600 psi (250 bars).
contamination or corrosion
Material : stainless steel. • Protected against dust
Flow rate : see page 14 . Ergonomic design • Light weight : 3.62 Lbs (1,640 kg )
Service temperature :
- 40° F to 185° F ( - 40° C to 85° C ). User friendly operation • Easy handling
4.21 0.43
Ø 3.35
2 screws M 0.24
4.33
3.35
N 007 446 00
Nozzle
THREADS NOZZLE PART NUMBERS
Thread (filling)
1.81 Ø 2.05
0.83/Flats
BLUE YELLOW
Filling Vent
3.54
0.43/Flats
0.79 7.95
3/4 - 16 UNF 7/16 - 20 UNF N 005 401 00 N 005 402 00
11.89
JIC 37° JIC 37°
All dimensions in inches
5
NGV 1 type 2-3 nozzles
Double alignment guiding system Available from stock in 2 different Can be used with any type of vehicle
ensures long life. service pressures. which has an NVG 1 receptacle.
Great for fleets who already have a Color coded sleeve visually identifies
three way valve installed. service pressure.
Storage requirement to protect
Keying system prevents higher Insulated coating protects hand from the nozzle for water and dirt.
pressure nozzle from connecting cold metal. When not in use, each nozzle must be
onto lower pressure receptacle. protected from water and dirt. It is why
Cycle tested to withstand more than
Automatic one-hand operation, 100,000 connections. we propose the nozzle storage rack
push to connect. shown in the opposite page.
Check valve prevents flow of gas
Ball locking for reliability. when nozzle is disconnected.
6
Technical data
Internal diameter : 5/16” (7.5 mm). Material : stainless steel.
Flow area : 0.068 sq. in. (44 sq. mm). Flow rate : see page 14.
Service pressures Service temperature :
(connected and disconnected) : - 40°F to 185°F ( - 40°C to 85°C ).
3000 psi (200 bars)
3600 psi (250 bars).
PART NUMBERS
Part numbers
THREAD BLUE YELLOW
3000 psi (200 bars) 3600 psi (250 bars)
4.47
SAE O-ring port for 8.64 AGA/NGV1: N 010 229 95 AGA/NGV1: N 010 230 95
3/8" OD tubing with 9/16 - 18 CGA/NGV1: N 010 229 95
9/16 - 18 UNF female UNF TÜV : N 002 271 95
left-handed thread LH
R 138 980 00
dirt when not in use. 3000 psi (200 bars) 3600 psi (250 bars)
Contact us for other options.
CMV 08. 9000/30
➤ ➤
➤ ➤
Applications
● Receptacle designed to last for
the lifetime of the vehicle.
• Quiet
The internal technology of the plug reduces
the intensity of vibrations caused by fluid
passage during refuelling.
GMV 08/C for refuelling
• Quick of light and heavy duty vehicles
• Efficient
Minimal pressure for valve opening.
• Long life expectancy
Due to its high quality construction,
the material used and the machining
accuracy. Keying system Technical data
Ensures that a 3600 psi pressure GMV 08/C and GMV 09
nozzle cannot connect onto a 3000 psi Service pressures
The STÄUBLI receptacles are pressure receptacle but allows a (connected and disconnected) :
leak-free at low and high pressure, 3000 psi pressure nozzle to connect 3000 psi (200 bars) - 3600 psi (250 bars).
whatever the temperature. onto a 3600 psi pressure receptacle. Material : stainless steel.
Service temperature :
when nozzle is disconnected. - 40°F to 250°F (- 40°C to 120°C)
Excellent flow rates make STÄUBLI Pressure A (in.) B (in.)
GMV 09
standard size receptacles the best 3000 psi (200 bars) 0.81 0.98 Internal diameter : 3/8” (9 mm).
choice for any type of vehicle. 3600 psi (250 bars) 0.81 0.94 Flow area : 0.098 sq. in. (63 sq. mm).
All STÄUBLI receptacles can be used Flow rate : see page 14.
with any STÄUBLI nozzle or with any Service temperature :
nozzle complying with the NGV 1 Storage requirement - 40°F to 185°F (- 40°C to 85°C).
requirements. Use a dust cap to keep dust and water
Stainless steel construction gives from entering the fuel system.
strength and durability.
Cycle tested to withstand more
than 20,000 connections.
8
Part numbers GMV 08/C recommended for light and heavy duty
Every receptacle (GMV 08/C and GMV 09) Thread Dimensions (in.) PART NUMBERS
is delivered with dust cap or Ø tube BLUE YELLOW
L L1 ØD H1 H2 H3
3000 psi (200 bars) 3600 psi (250 bars)
H3 / flats
Ø 0.94 ( 3600 PSI)
Ø 0.98 ( 3000 PSI)
9/16 - 18 0.90
Ø 0.81
Thread
Bulkhead mount for tubing 1/4” 3.27 0.59 0.65 0.94 0.55 N 011 402 96 N 011 403 96
(comes with double ferrule and nut)
3/8” 3.27 0.59 0.65 0.94 0.75 0.90 N 011 404 96 N 011 405 96
H1 /flats 0.98/flats 1/2” 3.42 0.59 0.88 1.06 0.87 (3000 psi) N 011 406 96 N 011 407 96
H2/flats
6 mm 3.07 0.43 0.72 0.87 0.55 N 011 408 96 N 011 409 96
Ø 0.81
ØD
8 mm 3.11 0.43 0.72 0.87 0.67 0.87 N 011 410 96 N 011 411 96
Ø tube
0.87
H3/flats (3600 psi)
0.55
1.67
2.89
Ø 1.50
1/2 BSP
N 002 300 98 N 002 301 98
Thread
1.97 1.70
Ø 1.50
UNF
1.97 1.70
1/2 BSP 1.20 1.30 1.14 1.38 N 002 304 98 N 002 305 98
ØD
0.06 min
0.24 max
2.48
L1
Bulkhead mount for tubing
(comes with double ferrule and nut)
H3 / flats
H1 / flats
H2 / flats
1/2” 4.49 1.20 1.30 1.14 0.87 1.38 N 002 306 98 N 002 307 98
Ø 0.81
Ø 1.65
ØD
Ø Tube
0.06 min
0.24 max
L1 2.48
L
Dust cap
for GMV 08/C and GMV 09 GMV 08.8550/30
Ø 0.2 Ø 0.9
➤
BRW 02
BRW 08
Applications
● Designed for Vehicle Refuelling
Appliances :
BRW 02 : for time fill. Technical data
BRW 08 : for fast and time fill.
BRW 02 BRW 08
● Positioned in the refuelling hose
Working pressure : Working pressures :
so that the hose will breakaway 3000 psi (200 bars). 3000 psi (200 bars),
if the car drives away with the
Material : aluminium and 3600 psi (250 bars).
nozzle connected.
stainless steel. Material : aluminium and stainless steel.
Service temperature : Flow rate : see page 14.
- 40°F to 185°F (- 40°C to 85°C). Service temperature :
Average air flow : 15 scfm (25 (n)m 3/h). - 40°F to 150°F (- 40°C to 65°C).
In-line mounting : minimum length of hose
between the dispenser and the break-
away must be 20 inches (500 mm). BRW 02 for time fill only
Automatically disconnects regardless of THREAD Dimensions (in) PART NUMBERS
whether the system is pressurized or L H 3000 psi (200 bars)
depressurized.
0.55 / flats
Ø 1.08
Thread
Ø 1.81
Check
In line checkvalve
valve
Ø tube
Ø 1/4 ” 0.71 2.22 N 009 247 97
B
C Ø 8 mm 0.73 2.24 N 009 335 98
Technical data
GMV 08/C check valve Fittings ( for GMV 08/C ) Dimensions (in) PART NUMBERS
Thread or Ø tube
Internal diameter : 1/4” (6 mm). B C H/flats 3000 psi (200 bars)
0.83 / flats
Flow area : 0.043 sq. in. (28 sq. mm). H / flats
Ø 6 mm 0.71 1.50 0.55 N 009 330 98
9/16-18UNF
Working pressures :
3000 psi (200 bars),
Ø tube
Ø 1.50
Hose characteristics
Technical data Construction
Service pressures : - Outer tube in black Polyurethane.
Filling : 5000 psi (345 bars). - Reinforcement in synthetic fibre
Vent : 1500 psi (100 bars). braid.
Service temperature : - Electroconductive inner tube
- 40°F to + 150°F ( - 40°C to + 66°C ). in Polyamide (PA).
12
6.10 (light duty)
9.25 157.48 6.89 (heavy duty) 19.68
1.18 *
➀ ➂ Thread (filling)
➁ ➃
➄ Thread (vent) ➅
188.98
* The filling hose must be 1.18” shorter than the venting hose.
Heavy duty 0.50 0.25 UNF 3/4 - 16 1/4 BSP N 007 211 00 N 007 212 00
Method of measurement
(according to the proposed standard
ISO/DIS 14 469)
Test fluid : air.
Pressure gauge 1
Filling at 3000 psi ( 200 bars ) of a
8 gallons (30 liters) receiver tank : R2 R 2.56
formula :
Q = 30 x P x 60
1.013 x t
with
Q = average flow in ( (n) l /mn )
P = final pressure of the receiver tank
R2 after 3 hours ( bars ).
t = filling time (s).
Result
Nozzle GMV 09 Receptacle GMV 08/C
1400 scfm Average air flow of filling
2334 (n)m3/h from 0 to 3000 psi ( 200 bars ) (air).
Initial pressure in the tank R1 :
3480 psi ( 240 bars ).
Nozzle CMV 08 Receptacle GMV 09 Initial pressure
1900 scfm in the receiver tank R2 : 0 psi.
3228 (n)m3/h
Upstream to downstream
volume ratio : 10.
Break-away BRW 08
1600 scfm
2766 (n)m3/h
“All illustrations and specifications in this leaflet are based on the latest product information available at the time of publication. STÄUBLI reserves the right to modify at any time materials, specifications, models…
and to discontinue models without prior notice or obligation.”
14
Z 960.06 us B
■ Sales coordination
● STÄUBLI subsidiaries
● Distributors