Professional Documents
Culture Documents
Hürner Manual Hydraulic: Whiteline
Hürner Manual Hydraulic: Whiteline
07.2021
HÜRNER WhiteLine
Manual Hydraulic
Manual 2.0 250-315-355
HÜRNER Schweisstechnik GmbH HÜRNER Welding Technology NZ Ltd HÜRNER Schweisstechnik Gulf L.L.C
12 Croskery Road Damascus Street, Al Qusais 4
Nieder-Ohmener Str. 26 Papakura DUBAI
35325 Mücke Auckland 2110 P.O.Box 233586
GERMANY NEW ZEALAND UNITED ARAB EMIRATES
Ph +49 6401 9127 0 Ph +64 9 299 3640 Ph +971 4 2584886
Fx +49 6401 9127 39 Fx +64 9 299 3740 Fx +971 4 2584887
E-Mail info@huerner.de E-Mail r.gruen@xtra.co.nz E-Mail info@hurnergulf.ae
Internet: www.huerner.de Internet: www.huerner.co.nz Internet: www.huerner.de EN
HÜRNER WhiteLine HÜRNER WhiteLine
Manual Hydraulic Manual Hydraulic
The Manual Hydraulic Series of butt-welding the heating element and the extra-large and closes the clamps of the machines sized up
machines in the new WhiteLine generation conveniently readable pressure gauge. to O.D. 315. No tools are needed for this.
makes a statement by its superior manufactur-
■■ All HÜRNER Manual Hydraulic butt-welding ■■ The facing tool with integrated micro-safety
ing quality and its scalability in the form of
machines can easily be upgraded with the switch is driven by a high-quality power
an easy upgrade to a data logging-enabled
HÜRNER data logger SPG 2.0 for welding drive engaged by a transmission chain. The
machine with the installation of an SPG 2.0
parameter viewing, monitoring, and record- precision heating element ships with a very
data logger for welding report generation.
ing. As a consequence the model version rugged anti-stick coating.
■■ The machine ships with a hydraulic unit “Manual + SPG” of the butt-welding
■■ A carrying rack is provided for the heating
that features, as a unique first, a totally machine complies with mains gas distribu-
element and the facing tool, to store them
integrated enclosure that also is a splash tors’ specification requirements, which state
with no worries about the heat.
and dirt shield for all components on the that data recording and report generation
inside. The front panel controls, too, are is mandatory, but do not require automatic ■■ Maximum protection of the machine,
included in the ingress protection according welding processes. while it is stowed away, is provided (up
to the IP 54 rating (where IP 64 is possible to O.D. 315) by an optionally available,
■■ The 4th clamp of the machine chassis can
upon request). high-quality transport box that has been
be easily removed by loosening 3 bolts,
specifically designed for the entire machine
■■ All connections, including an additional for welding operations at locations where
assembly, with drawer-style storage com-
power socket free to use for the opera- positioning the machine is a challenge and
partments for the reducer inserts.
tor’s convenience, are located at the back for joints with tees or other fitting elements.
of the controller. Both the facing tool and This turns the machine into a fully functional ■■ For all machines a welding neck support is
the heating element are also connected at “short” chassis with only three clamps. of course available, too.
the back panel of the hydraulic controller.
■■ The machine chassis is set on a specifically
Therefore, no additional power distribution
developed support frame exhibiting a warp
unit is needed.
resistance that manages with ease even the 2) Under development
■■ The hydraulic unit also doubles as the most extreme pipe parameters. Operators
central control panel of the machine with can be sure that the machine chassis does
which the user performs all relevant settings not tilt or twist even when very long lengths
and process steps. The front panel features of pipe with very thick walls are processed.
a GT keypad, the critical process controls,
■■ Large, knurled turning knobs mean easy
Stand-alone in Butt-Welding and also the digital temperature control for
handling for the operator who opens or
Automatic, “jumping”
n – n n – – – – – –
heating element*)
Included standard delivery
Hydraulic control-
HÜRNER Manual Hydraulic characteristics
ler for Manual with n n n n n n n n n n Welding monitoring system Heating element temperature
centralized controls
Display screen Numeric 7-segment characters, character height 10 mm
Basic machine chassis n n n n n n n n n n
Approvals, quality, ingress protec- CE, ISO 9001: 2015, IP 54 (IP 64 optional), WEEE Reg. No. DE 74849106, RoHS-compliant
Facing tool with tion
micro-switch n n n n n n n n n n
Hydraulic unit Only one external power supply needed, all connections and a power socket for the operator’s convenience at the back
PTFE-coated heating of the enclosure1)
element n n n n n n n n n n
Digital heating element temperature control, adjustable at the hydraulic unit
Hydraulic unit fully encased in rugged steel enclosure weighing as little as 19.5 kg (up to O.D. 335 mm)
Carrying rack n n n n n n n n n n Max. pressure, up to O.D. 355 mm, 130 bar, O.D. 500 - 630 mm, 150 bar, O.D. 800 - 1600 mm, 220 bar
HÜRNER transport Accurate and maintenance-free gauge showing the welding pressures
box for reducers and n n n n – – – – – –
machine, optional Easy upgrade of the hydraulic and control unit with a SPG 2.0 data logger for report generation
n Pressure sensor 160 bar installable to the hydraulic unit
HÜRNER aluminium n Specifically designed support for construction site-suitable installation of the data logger to the edge of the hydraulics
n*) – n n n n n n n n
reducers1) n Pressure and temperature lines connected directly to the hydraulic unit with very short lengths of hose or cable
HÜRNER steel n Power supply to the data logger from the power socket of the hydraulic unit
n*) n – – – – – – – –
reducers1) Manufacturer warranty 12 months
1) Modified design: Screw-Fastened
1) Only if prepared for SPG data logger
*) Available as an option