Professional Documents
Culture Documents
Concrete Mix Design As Per Is 10262 - 2019
Concrete Mix Design As Per Is 10262 - 2019
Concrete Mix Design As Per Is 10262 - 2019
com
Thank you for Downloading and using this sheet for doing mix design calculations.
This sheet can be used for doing mix proportioning of Normal Mixes up to M60 Grade of Concrete.
This sheet allows you to prepare pure cement mixes and dual blend mixes.
You can also design high strength mixes using this sheet in dual blend mode and after proportioning,
you can manually add silica fume from 5% to 10% by relacing CM quanity to form triple blend.
It is important to do trial mixes after proportioning to verify the performance as well as need for re-designing.
For doing Mix Design do enter data only in "Mix Proportioning" Sheet.
Only edit cells which are highlighted with green color shown on left side of this cell.
You need to have the basic data about ingredients available with you for doing designing.
I have added alerts text at important locations to guide you if the entered data by you has issues.
Make sure you go step by step from top to bottom by adding data at all required fields.
After completion of mix proportioning, you will find three mixes on Trial Mixes sheet, do trials for all the mixes.
This sheet is designed in very user friendly way and the mix desin process is very quick.
If there are any error, issues, difficulties etc. do post about same of forum, we will update on same.
Do use this sheet for your personal as well as official work use.
Do not share the copies of it without taking concent from Author. This sheet is subjected to copyright.
Do Check sheets at Forum on Designing of Mass Concrete, Self Compacting Concrete, High Strength concrete etc.
Thank You!
https://civil4m.com
https://civil4m.com
https://civil4m.com
of Concrete.
https://civil4m.com
https://civil4m.com
proportioning,
e blend. https://civil4m.com
https://civil4m.com
s need for re-designing. https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
this cell. https://civil4m.com
https://civil4m.com
ng. https://civil4m.com
https://civil4m.com
has issues. https://civil4m.com
https://civil4m.com
s. https://civil4m.com
https://civil4m.com
do trials for all the mixes. https://civil4m.com
https://civil4m.com
. https://civil4m.com
https://civil4m.com
ate on same. https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
ed to copyright. https://civil4m.com
https://civil4m.com
High Strength concrete etc. https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
https://civil4m.com
Concrete Mix Design as per IS 10262 - 2019
Type of Cement:
Specific Gravity (SG):
SG is different, do specify:
SG Used for Design Calclulations:
Exposure Condition:
Durability Aspect as per Exposure Condition (IS 456)
Minimum Cement or Cementitious Content: Kg/Cum
Maximum Cement Content (OPC) as per IS 456: 450 Kg/Cum
Maximum Free W/C or W/CM ratio:
Minimum Grade of Concrete:
Type of Aggregate
Specific Gravity in
Water Absortion as %
Properties SSD Condition
Coarse Aggregates:
Fine Aggregates:
Note: As per the limits, Combination more often comes as 60:40, if you see red highlight on gradation cell or you wish
to adjust combination as per your own requirement, make sure combine gradation cells do showing green color only.
Note: Do take this data from Admixture Manufacturer and it is required only when admixture is to be used for
production of concrete.
Recommended
Replacement of Cement by Mineral Admixture Min % Max % Specify
0 NA NA Specify within Min-Max L
0 Kg
0 Kg
20 mm 0 In SSD (Saturated Surface Dry )Condition Kg
10 mm 0 In SSD (Saturated Surface Dry )Condition Kg
Sand Zone I In SSD (Saturated Surface Dry )Condition Kg
Water Kg
Chemical Admixture: 0 @% Kg
Total Wieght 0 Kg
Note: The slump shall be measured and the water content and dosage of admixture shall be adjusted for achieving the
required slump based on trial, if required. The mix proportions shall be reworked for the actual water content and
checked for durability requirements.
Note: Two more trials having variation of ± 10 percent of water-cement ratio shall be carried out and a graph between
three water-cement ratios and their corresponding strengths shall be plotted to work out the mix proportions for the
given target strength for field trials. However, durability requirement shall be met.
https://civil4m.com
https://civil4m.com
https://civil4m.com
Specify within Min-Max Limit or You can also do replacement as per your wish
Trial Mix 1 as per designed Proportions Trial Mix 2 with 10% less Water
Ingedients Quantity Ingedients
per Cum
0 OPC 33 Grade conforming to IS 269
0 GGBS conforming to IS 16714
20 mm 20 mm
10 mm 10 mm
Sand Sand
Water Water
Chemical Admixture: Chemical Admixture:
Total Wieght 0 Total Wieght
0% less Water Trial Mix 3 with 10% More Water
Quantity Ingedients Quantity
per Cum per Cum
OPC 33 Grade conforming to IS 269
GGBS conforming to IS 16714
20 mm
10 mm
Sand
Water
Chemical Admixture:
0 Total Wieght 0