Professional Documents
Culture Documents
TLE 3RD Grading
TLE 3RD Grading
TLE 3RD Grading
Multiple Choice Directions: Read and analyze each statement below. Choose the correct answer and write on the space
provided before each number.
___1. It measures 12 -18 inches and can be used for drawing straight lines and cutting lines.
___2. This is used to shape the depth of the neck hole and armhole of the pattern.
___4. A small hard pitted cup worn for protection on the finger that pushes the needle in sewing.
___6. A machine that is run by foot which may also be converted to electric power machine is known as:
___8. The part of the sewing machine that controls the looseness and tightness of Stitches.
___10. A flexible tape with different type of measurements essential for taking body measurements.
___12. What do you call the tool that holds the straight pins and needle while working to prevent accidents?
___16. It is the curve part of the head containing mechanism for operating the needle.
___19. What do you call when the pure colors are mixed with white?
___20. What do you call when the pure colors are mixed with black?
___21. One of the following is the function of pitman rod of the Lockstitch sewing machine.
a. Leads the balance wheel through the belt connection. c. moves the band wheel
b. holds the treadle to band wheel crank. d. removes the belt from the wheel
___22. One of the following is the function of treadle of the Lockstitch sewing machine.
a. protects the dress from the wheel. c. supports the cabinet of the machine.
b. where the feet are stationed to the band wheel through the pitman rod. d. holds the head of the
machine.
___23. Which of the following tool moves the fabric while sewing?
a. Metric System b. English System c. Metric and English System d. Tape Measure
___28. The ______measurement is taken from the left of the figure to the right.
___30. Which of the following is taken from nape down the center back to the desired length?
___31. You need to buy a 60 inches’ length of fabric to be used in making a dress to your customer. You have known
that the cost of the fabric that you are going to use is P5.00 per centimeter. How much will you need/pay to buy it?
a. 152.4 cm and ₱777.00 b. 153.4 cm and ₱888.00 c. 154.4 cm and ₱999.00 d. ₱1, 111.00 only
a. red, blue, green b. red, blue, orange c. red, blue, green d. red, blue, yellow
a. orange, green, red b. orange, green, blue c. orange, green, violet d. orange, red, yellow
___35. What will be the result if you add black to red?
___36. This is used to hold fabric temporarily in place, until permanently stitched.
___37. This stitch is used for a flat finish next to fabric, such as seam binding on the hem.
___38. Any source of potential damage, harm or adverse health effects on something or someone under
___39. The chance of probability that a person will be harmed or experience an adverse health effect if
exposed to a hazard. It may also apply to situations with property or equipment loss.
___40. To make this stitch, push point of needle in and out of the fabric until you have several stitches on the needle.
___44. It resembles machine stitching and is used to strengthen a seam made by hand.
___47. It can be defined as a dangerous condition where a worker could make electrical contact with
energized equipment or a conductor, and from which the person may sustain an injury from shock.
___49. All of the following are the most common types of physical hazards, EXCEPT.
___50. What do you called a hazard that threaten your physical safety?
***END OF TEST
“STUDY while others are sleeping, WORK while others are loafing, PREPARE while others are
1.C 26.C
2.A 27.B
3.A 28.B
4.A 29.A
5.A 30. D
6.C 31. A
7.A 32. A
8.D 33.D
9.B 34.C
10.B 35.C
11.D 36.A
12.C 37. A
13.B 38.A
14.D 39.B
15.A 40.C
16.A 41.C
17.B 42.C
18.C 43.D
19.D 44.B
20.C 45.A
21.B 46.C
22.B 47.A
23.C 48.C
24.D 49.C
25. D 50.D