Professional Documents
Culture Documents
FRFD Series: Flush Face Radial Flow Diffuser
FRFD Series: Flush Face Radial Flow Diffuser
FRFD Series: Flush Face Radial Flow Diffuser
Product Information
FRFD
• Diffuser frame and control blades
- aluminum
• Plenum and equalization baffle -
- steel
• Finish: B12
- white powder coat
AFRFD
• All-aluminum construction
• Finish: B12
- white powder coat
FRFDSS
• All-stainless steel construction
- #4 Finish on exposed surfaces
Performance Data
24”x24” 300 0.036 0.055 -- 1-2-4 1-4-6 3-5-8 1-2-4 2-3-5 2-4-5
10” 400 0.065 0.098 23 3-4-6 4-5-7 5-6-8 3-4-6 4-5-6 4-5-6
Inlet 600 0.145 0.221 38 4-5-6 5-6-8 6-7-8 5-5-6 5-8-9 6-8-10
24”x48” 400 0.036 0.069 23 1-1-2 1-2-2 3-4-5 2-2-3 2-2-3 3-3-4
10” 600 0.081 0.156 35 2-2-3 4-5-6 5-6-7 3-4-4 4-5-6 5-6-6
Inlet 800 0.144 0.278 44 4-4-5 6-7-7 8-8-9 5-5-6 6-6-7 6-7-8
24”x48” 600 0.054 0.091 28 1-2-3 2-4-5 4-5-6 1-2-3 2-3-3 3-4-4
12” 800 0.096 0.161 37 2-3-4 4-5-6 5-6-7 2-3-5 4-4-5 5-6-6
Inlet 1000 0.150 0.252 43 3-4-4 5-5-6 6-6-7 4-5-6 5-6-7 6-7-7
Performance Notes:
1. Units are tested in accordance with ASHRAE Standard
70-2006. FRFD DIFFUSER END VIEW
2. Air flow is in cubic feet per minute, cfm.
3. All pressures are in inches of water., in. w.g.
4. The NC values, sound pressure level, are based on a room
absorption of 10 dB re 10-12 watts and one diffuser.
5. Blanks (--) indicate an NC value less than 20. Vertical Throw
Horizontal Throw
Product Overview
2 Way Full-Radial
2 Way Horizontal
RFD - Aluminum Radial Flow Diffuser AFRFD - Aluminum Flush Face Radial Flow Diffuser
Supply and install Price RFD radial flow diffusers of the sizes, Supply and install Price AFRFD Flush Face Radial Flow diffuser
configurations and capacities indicated on the drawings of the sizes and capacities indicated on the drawings or diffuser
and/or diffuser schedule. schedule. Each diffuser shall supply a (2 way/1 way) radial, non-
Each diffuser shall supply a radial, non-aspirating, low velocity aspirating, low velocity air pattern.
air pattern. The Flush Face Radial Flow Diffuser, Model AFRFD, shall be
The diffuser shall consist of a multi-angular perforated face that constructed of air deflector blades below an equalization baffle.
extends below the ceiling by approximately 5.75” (146), and an The entire face of the diffuser shall lay even with the ceiling line,
integral plenum with duct connection. no part of the diffuser shall project below the ceiling system.
Face frame, border, deflector blades, equalization baffle, and
The face shall be 0.04” (1) thick aluminum perforated and plenum components shall be constructed of aluminum.
shall incorporate directional control vanes, quick- release
latches and full length hinging to the plenum. The hinging shall The diffuser face shall open easily with quarter-turn fasteners
be designed to allow the complete separation of the face and and safety cable for damper adjustment and cleaning.The plenum
plenum if required. Room-side access shall be available to the shall be fully accessible for cleaning with no internal baffles or
interior of the unit without moving the backpan/plenum. Screw obstructions. Diffusers shall have a B12 white powder coat finish
and/or clip mounting of the diffuser face is unacceptable. which will withstand cleaning with high concentration cleaning
solutions and agents.
The plenum shall be fully accessible for cleaning with no internal
baffles or obstructions. FRFDSS - Stainless Steel Flush Face Radial Flow Diffuser
The perforated face shall be constructed of aluminum with a Supply and install Price FRFDSS Flush Face Radial Flow diffuser
white baked enamel finish. The plenum shall be aluminum with of the sizes and capacities indicated on the drawings or diffuser
a white powder coat finish. Optional B12 white powder coat schedule. Each diffuser shall supply a (2 way/1 way) radial, non-
finish available for both face and plenum. aspirating, low velocity air pattern.
RFDSS - Stainless Steel Radial Flow Diffuser The Flush Face Radial Flow Diffuser, Model FRFDSS, shall be
constructed of air deflector blades below an equalization baffle.
Supply and install Price RFDSS stainless steel radial flow The entire face of the diffuser shall lay even with the ceiling line,
diffusers of the sizes, configurations, and capacities indicated no part of the diffuser shall project below the ceiling system.
on the drawings and/or diffuser schedule. Face frame, border, deflector blades, equalization baffle and
Each diffuser shall supply a radial, non-aspirating, low velocity plenum components shall be constructed of .037” (1 mm) 304
air pattern. stainless steel.
CRITICAL ENVIRONMENTS
The diffuser shall consist of a multi-angular perforated face that The diffuser face shall open easily with quarter-turn fasteners
extends below the ceiling by approximately 5.75” (146), and an and safety cable for damper adjustment and cleaning. The
integral plenum with duct connection. plenum shall be fully accessible for cleaning with no internal
The face shall incorporate directional control vanes, quick-release baffles or obstructions.
latches and full length hinging to the plenum. The hinging shall FRFDA - Flush Face Radial Flow Adjustable Diffuser
be designed to allow the complete separation of the face and Supply and install Price FRFDA Flush Face Radial Flow diffuser
plenum if required. Room-side access shall be available to the of the sizes and capacities indicated on the drawings or diffuser
oving the backpan/plenum. Screw
interior of the unit without m schedule.
and/or clip mounting of the diffuser face is unacceptable.
The Flush Face Radial Flow Diffuser, Model FRFDA, shall be
The plenum shall be fully accessible for cleaning with no internal constructed of air deflector blades below an equalization baffle.
baffles or obstructions. The entire face of the diffuser shall lay even with the ceiling line,
The perforated face, internal components, and plenum shall with no part of the diffuser projecting below the ceiling system.
be constructed of 304 stainless steel. The perforated face shall Face frame, border, and deflector blades components shall be
have a #4 finish. constructed of aluminum. Equalization baffle and plenum may
FRFD - Flush Face Radial Flow Diffuser be provided in painted steel.
Supply and install Price FRFD Flush Face Radial Flow diffuser Each diffuser shall be adjustable to supply a precise, repeatable
of the sizes and capacities indicated on the drawings or diffuser full 2 way radial, full 1 way radial, 2 way horizontal or vertical,
schedule. Each diffuser shall supply a (2 way/1 way) radial, non- non-aspirating, low velocity air pattern. Pattern adjustments must
aspirating, low velocity air pattern. be affected by setting pattern adjustment controllers in
predetermined locations above the equalization baffle. Pattern
The Flush Face Radial Flow Diffuser, Model FRFD, shall be adjustment at the face using movable blades is not acceptable.
constructed of air deflector blades below an equalization baffle.
The entire face of the diffuser shall lay even with the ceiling line, The diffuser face shall open easily with quarter-turn fasteners
with no part of the diffuser projecting below the ceiling system. and safety cable for damper adjustment and cleaning. The
Face frame, border, and deflector blades components shall be plenum shall be fully accessible for cleaning with no internal
constructed of aluminum. Equalization baffle and plenum may baffles or obstructions. Diffusers shall have a B12 white powder
be provided in painted steel. coat finish which will withstand cleaning with high concentration
cleaning solutions and agents.
The diffuser face shall open easily with quarter-turn fasteners
and safety cable for damper adjustment and cleaning. The
plenum shall be fully accessible for cleaning with no internal
baffles or obstructions. Diffusers shall have a B12 white powder
coat finish which will withstand cleaning with high concentration
cleaning solutions and agents.
E-189
© Copyright Price Industries Limited 2011. All Metric dimensions ( ) are soft conversion.
Imperial dimensions are converted to metric and rounded to the nearest millimeter.