Units command:
set scale to meters or millimeters.
Precision to 0,00 because it will become chaotic in the sheet? No use beyond two points
Extend command:
Intersect line
Trim
Dims?
Line can be made in 4 diff. Ways
1
Ab: absolute coordinate method
Set limits to 00 for x & y
Specify 1st point sets the x and y coordinates. Press tab to enter y coordinates.
Comma number denotes angle wrt ‘st point. E.g, 20,5 5 being the degree
Putting 0 will not change the y coordinates.,
Sir has 2 conditions
He has to move the point 20m away from the ‘1st point
Idk
The coordinates are subject to be in respect to the point they are taken from. Le. if you
put (5,5) from O then the line will move 5 units from both x and y coordinates. Now at the
ew point when you put (20,5) then the point will move 20 units along x axis and 5 units
along y axis. To obtain horizontal line the y coordinate has to be put 0 ie. (20,0)
Zentera
Zoom a for area
Switch btn angle and line by tab
Comma for coordinates
Tab for angles
What does @ do?