Professional Documents
Culture Documents
DRONE Pressure - Regulator
DRONE Pressure - Regulator
●● Simple to install and operate Analysed for Food Safety per HACCP-Analysis
Removable spindle enables simple setting of the Fulfils the requirements of EU Regulations (EC)
required outlet pressure 1935/2004, and (EC) 2023/2006
Can be positioned at any angle / orientation
For indoor and outdoor installation. Fulfils the requirements of German Food and Feed
(LFGB) Law, and is suitable for contact with food
●● Glycerine-filled manometer, gases
unfilled version for oxygen
Designed for Oxygen Service in accordance with EIGA
13/20 and CGA G-4.4: Oxygen Pipeline and Piping
Operation / Usage Systems
Ideal for process gas supply where pressure accuracy
is required even when inlet pressures and flow rates Cleaned for Oxygen Service in accordance with EIGA
33/18 and CGA G-4.1: Cleaning of Equipment for
are varying.
DR2.4 - E01/1D subject to change
Oxygen Service
High flow rates and outlet pressure accuracy are
achieved, even when the difference between inlet and Available upon request
outlet pressures is small. Certificates and test reports
Other Dome types
Maintenance
Switchover systems / parallel supply systems
Depending on application, moving wetted parts may
need replacement every 1-3 years. Customer-specific / customised versions
WITT-Gasetechnik GmbH & Co KG, Salinger Feld 4-8, D-58454 Witten, Tel. +49 (0)2302-8901-0, witt@wittgas.com
DOME PRESSURE REGULATOR SET 737 LE/S
Complete solution, own-medium controlled
Outlet pressure
0.5 - 10 bar
7 - 145 PSI
G 3/4 female,
Connections
3/4″ NPT female
Kv-Value 2.4
Cv-Value 2.8
Coefficient of increase
in pressure after closing
Coefficient as per R = 0.17
DIN EN ISO 7291
Coefficient of unevenness
I = 0.02
-30 °C to +50 °C
Temperature range
-22 °F to +122 °F
Housing Brass
Stainless steel (1.4301) spindle
Inlet filter
100 µm
Cartridge Stainless steel (1.4305)
Membrane CR
O-Ring NBR
Spring Stainless steel (1.4310)
Stainless steel housing
DIN EN ISO 5171 for O2,
Pressure gauge
DIN EN 837-1 glycerine-filled
for other gases
Weight approx. 13 kg / 29 lb
other material (material combinations) upon request
Connection Dimensions in mm
Model
G A B C C1 H L S SW
3/4″ female 192.6 79 3 - approx. 205 146 36 32
737 200
3/4″ NPT female 192.6 79 3 27 approx. 205 36 36
(L+2xC1)
other connections upon request
version
3/4″ NPT female 3/4″ female
C1 L C
4x threads
for hook
attachments
SW
etc. M8
DR2.4 - E01/1D subject to change
S
G
A B
For more pressure regulators visit www.domepressureregulators.com
WITT-Gasetechnik GmbH & Co KG, Salinger Feld 4-8, D-58454 Witten, Tel. +49 (0)2302-8901-0, witt@wittgas.com
DOME PRESSURE REGULATOR SET 737 LE/S
Complete solution, own-medium controlled
Pressure control performance examples (N2, 20 °C : apply conversion factor of x 0.8 for CO2)
12
10
pv: 15 bar
8 pv: 21 bar
pv: 8 bar
pv: 15 bar
4
Outlet pressure [bar]
pv: 6 bar
pv: 15 bar
2
0
0 100 200 300 400 500 600 700 800
Flowrate [m3/h], Pv = Inlet pressure [bar]
1 m3/h = 35.3 scfh
Example:
Inlet pressure: 10 barabs
DR2.4 - E01/1D subject to change
WITT-Gasetechnik GmbH & Co KG, Salinger Feld 4-8, D-58454 Witten, Tel. +49 (0)2302-8901-0, witt@wittgas.com
DOME PRESSURE REGULATOR SET 737 LE/S
Complete solution, own-medium controlled
Replacement filter
Model Order-No.
737LE/S 956.504300
DR2.4 - E01/1D subject to change
WITT-Gasetechnik GmbH & Co KG, Salinger Feld 4-8, D-58454 Witten, Tel. +49 (0)2302-8901-0, witt@wittgas.com