Professional Documents
Culture Documents
300 PTLC - Pub 3109
300 PTLC - Pub 3109
Everything that is needed to protect sensitive loads from power outages and transients is in one package, the ASCO SerieS 300 Automatic Power Transfer Switch with microprocessor digital controller. Versatile Square D Load Distribution Panel, and protective transient voltage surge suppression for normal and emergency. ASCO Automatic Transfer Switches are the standard of
the industry and represent the most advanced technology in transferring loads between two power sources. Available with 200 or 400 Amp rating, 120/240 VAC 60 hz single phase, 3 wire or 120/208 VAC, 60 hz three phase, 4 wire. The PTLC includes a 42position load distribution panel. Main circuit breakers provide overcurrent protection and disconnect
for convenient and safe serviceability. The shallow profile facilitates installation. When power fails, the automatic transfer switch follows user-set time delays to start the generator, transfer the load to the generator, reconnect to utility power and shut down the generator after generator cool down.
Features
Power Transfer Load Center is Service Entrance Rated and listed to UL67 Automatic Transfer Switch is listed to UL1008, the standard for Transfer Switch Equipment, and meets NFPA 110 for Emergency and Standby Power Systems and the National Electrical Code (NEC) articles 700, 701 and 702. Also CSA certified to CSA 22.2 No. 178-1978 True double-throw contacts eliminate simultaneous connection to utility and generator Adjustable close differential voltage sensing on the normal source Automatic engine exerciser to test the generator with or without loads. This is optional accessory 11BG on standard SerieS 300 products Pre-wired and factory tested for easy installation Space saving modular design provides easy access and serviceability Convenient terminals for connecting neutral and ground conductors Available in Type 1 (indoor) or Type 3R (non-secure outdoor) enclosures
Optional Features
Three source arrangement (stationary and portable generators) Generator single pole receptacles Generator multipole receptacle
ASCO
300L +
Product 300L
To order an ASCO SerieS 300L Power Transfer Load Center, complete the following catalog number:
4
Load Center 4 = 42 Circuits
200
Amperes
Continuous Rating
F
Voltage Code C F
1
Controller
X
Options Insert X
C
Enclosure
Type 1 (Standard) Type 3R Secure
200 400
C F
Notes:
ASCO
1. Auxiliary contacts indicate position of main contacts. Two (2) for normal and two (2) for emergency position (one set is standard) 2. Specify N for Utility (1 required), B for Utility and Generator (2 are required), and L for Load (1 required)
series 300L Power Transfer Load Center Dimensions and Shipping Weights1
Phase Poles 2 3 2 3 2 3 2 3 Enclosure Type Type 1 Type 1 Type 3R Non Secure Type 3R Non Secure Type 1 Type1 Type 3R Non Secure Type 3R Non Secure Dimensions2, In. (mm) Width Height 30 (762) 66 (1675) 30 (762) 66 (1675) 30 (762) 84 (2133) 30 (762) 84 (2133) 35 (888) 78 (1980) 35 (888) 78 (1980) 30 (762) 84 (2133) 30 (762) 84 (2133) Depth 6 (152) 6 (152) 10 (254) 10 (254) 7.25 (184) 7.25 (184) 10 (254) 10 (254) Approx. Shipping Weight Lb. (kg) 255 (118) 259 (120) 317 (146) 321 (148) 290 (134) 298 (138) 352 (163) 360 (166)
Switch Rating amps 200 200 200 200 400 400 400 400
Note: 1. Dimensional data is approximate and subject to change. Certified dimensions available upon request.
One #14 to 4/0 AWG Two 1/0 AWG to 250 MCM or One #4 AWG to 600 MCM
Note:
Publication 3109 R2
January, 2008