Professional Documents
Culture Documents
P2 - XII Adv. PCM - 23.08.2022
P2 - XII Adv. PCM - 23.08.2022
Single correct
1. The average of the number n sin n° for n = 2, 4, 6…..180, is
(A) 1 (B) cot 1° (C) tan 1° (D) 1/2
x
dt
2. Let f x . Let g(x) is the inverse of f(x). Then which of the following statement is true?
0 1 t3
(A) 3g2 = 2g” (B) g2 = –g” (C) g2 = – 2g” (D) 2g2 = 3g”
2
3. A variable straight line passing through the point A (9, 5) cuts the parabola y = 6x at the points B and C.
The locus of the mid-point of BC is a conic whose length of latus-rectum is
(A) 4 (B) 3 (C) 2 (D) 1
x 7 y 5 z 3 x 1 y 1 z 1
4. If a line with direction ratio < 2, 2, 1 > intersects the line and at A
3 2 1 2 4 3
and B, then AB =
(A) 2 (B) 2 (C) 3 (D) 21
x2 y2
5. If the normal at the point ' ' on 2
1 intersects, the curve again at ' ', then
a b2
Multiple choice
n
a
7. In the expansion of x a 0 if term independent of x does not exist, then n must be
x2
(A) 15 (B) 10 (C) 16 (D) 20
1
8. If tan 1 2tan2 tan 1 tan , then tan is
3
(A) 0 (B) –1 (C) 1 (D) –2
255 255
9. N = 144 + 192 , then
(A) N is divisible by 7 (B) N is divisible log 49 (C)N is divisible by 35 (D)N is divisible by 28
2 2 2 2
10. If (a, 0) is point on diameter of circle x + y = 4, then x – 4x – a = 0 has
(A) exactly one root in [2, 5] (B) exactly one root in (–1, 0)
(C) distinct roots less than 5 (D) distinct roots greater than –1
–1 2 2 2 2 –1
11. If sin (a x + b y ) + cos |ax + by| = , where ab < 0, then
1 1 1 1
(A) a = b = x = y = 1 (B) ay , bx 1 (C) ax , by (D) ab , xy 1
2 2 2 2
12. The transverse axis a hyperbola is the line y = x and one of its asymptotes is the line y = 2x. If the given
hyperbola passes through the point (3, 4), then the equation of hyperbola is equal to
5
(A) x 2 y2 xy 37 0 (B) 2x 2 2y 2 5xy 46 0
2
(C) 2x2 2y2 5xy 10 (D) 2x2 2y2 5xy 10 0
Passage-1
In a ABC , the equation of the side BC is 2x – y = 3 and its circumcentre and orthocentre are at (2, 4) and
(1, 2) respectively.
13. Length of circumradius of ABC is
61 51 41 43
(A) (B) (C) (D)
5 5 5 5
14. The distance of orthocentre to vertex A is equal to
1 6 3 2
(A) (B) (C) (D)
5 5 5 5
Passage-2
2
Let f(x) = x – 3x + 2 be a function, x R.
15. The area bounded by the curve y = |f(|x|)| between 1 x 2 and x-axis is
(A) 1/5 sq. unit (B) 1/4 sq. unit (C) 1/3 sq. unit (D) 1/2 sq. unit
2 2
16. The number of solution y f x and x y 2 is
(A) 4 (B) 5 (C) 6 (D) 8
Numerical grid
1 1
18. If A and det A n I 1 n
,n N then the value of is
1 1
x
1 1
19. Let f x sin t 2 t x dt, then the value of f " f is______.
0
2 2
20. The set of natural numbers N partitioned into arrays of rows and columns in the form of matrices as
6 7 8
2 3
M1 1 , M2 , M3 9 10 11 .... and so on, where the sum of the elements of the diagonal in M6 is
4 5
12 13 14
440 , then is______
n
4r f 3r
r 1
21. If f(x + y + z) = f(x) + f(y) + f(z) with f(1) = 1 and f(2) = 2 and x, y, z R, then lim is equal to__.
n n3
A)
r q
B)
q
C)
r 1 q D)
r 1 q
4 r22 4 r r22 4 r
2
2
4 r r22
2. A parallel plate capacitor (plate area: A) connected to battery of emf ‘V’ and
negligible internal resistance, so that one of the plate is made to oscillate and distance
between plate varies as d d0 a cos t , a d0 . If maximum current observed in
circuit is I 0 then maximum possible amplitude of vibration (a) is
a2 I0 I 0 d0 I 0 d 02 I 0 d0
A) B) C) D)
VA 0 V A 0 VA 0 VA 0
3. A slit is cut along the left bottom edge of a rectangular tank. The slit is closed by a
wooden wedge mass ‘M’ and apex angle ‘ ’ as shown in diagram. The vertical plane
surface of the wedge is in the contact with the left vertical wall of the tank. Coefficient
of static friction between these surfaces in contact is ‘ ’. To what maximum height,
can water be filled in tank without any leakage through the silt? The width of tank is
‘b’ and density of water is ‘ ’
2M 4M
A) B)
b tan b tan
2M 2 M cos
C) D)
b sin cos b tan cos
4. A small disc is attached at one end of a light inextensible string that passes through a
hole in a frictionless horizontal tabletop. Initially the disc moves on a circle of radius
R with kinetic energy K 0 . The other end of the string is slowly pulled so that the disc
finally moves on a circle of radius R / . What is the work W done by the pulling
agency?
A) W 0 B) W 2 K 0 C) W 2 1 K 0 D) W 1 K 0
7. A narrow beam of monochromatic light of wavelength ' ' emitted by source of power
‘P’ propagating in positive x-direction gets reflected from perfectly reflecting plane
mirror having area vector A A i j . (velocity of light is c)
^ ^
C) Magnitude of force exerted by light beam on mirror depends only on ‘P’ & ‘c’
Qq 1 r r
F
where : positive constant, r is position vector of charge ‘q’ relative
4 0 r 3
to ‘Q’
qenctosed
C) Gauss’s law E.ds 0
holds true
V V V V
A) sin 1 B) sin 1 C) cos 1 D) cos 1
2 R 2 R R R
11. If wedge is moving with acceleration a as shown in the figure then value of net force
on m is
mg 2m 2 g
A) ma B) 2 ma C) 2 D)
2m M 2m M
12. Two loud speakers M and N are located 20m apart and emit sound at frequencies
118Hz and 121Hz respectively. A car is initially at point P, 1800m away from the
midpoint Q of the line MN and moves towards Q constantly at 60km/hr along the
perpendicular bisector of MN. It crosses Q and eventually reaches a point R, 1800m
away from Q. Let v t represent the beat frequency measured by a person sitting on the
car at time t. Let vP , vQ and vR be the beat frequency measured at locations P,Q, and R
respectively. The speed of sound in air is 330ms 1 . Which of the following statements
are true regarding the sound heard by the person?
A) The plot below represents schematically the variation of beat frequency with time
B) The rate of change in beat frequency is maximum where the car passes through Q
C) vP vR 2vQ
D) The plot below represents schematically the variation of beat frequency with time
SECTION-III
(Paragraph Type)
Paragraph
A horizontal conveyor belt is running at a constant speedb 3.0m / s . A small disc
enters the belt moving horizontally with a velocity 0 4.0m / s that is perpendicular to
the velocity of the belt. Coefficient friction between the disc and the belt is 0.50
13. What should the minimum width of the belt be so that the disc always remains on the
belt?
A) 0.9 m B) 1.6 m C) 2.0 m D) 2.5 m
14. What is the minimum speed of the disc relative to the ground?
A) 0.0 m / s B) 1.8 m / s C) 2.4 m / s D) 3.0 m / s
Paragraph
A hollow cylinder made of a thermally insulating material is equipped with a horizontal
piston P of mass m and area A . The piston is also made of a thermally insulating
material. There is no friction between inner surface of the cylinder and the piston.
Above the piston, a liquid of density is filled up to brim of the cylinder. The piston is
supported at the position shown due to pressure of an ideal gas filled in the lower
portion of the cylinder. Number of moles of the gas is n , atmospheric pressure is p0
and initial temperature of the gas is T0 . The heater H is switched on till the liquid
completely spills out (assume Quasi static process)
15. Work done by the gas on the piston in the entire process is
A) gh 2 A mgh B) p0 hA gh 2 A mgh
C) p0 hA 0.5 gh 2 A mgh D) 0.5 p0 hA gh 2 A mgh
16. Final temperature of the gas is
p0 gh p0
A) 2T0 B) 2T0
p0 p0 gh
p0 A ghA mg p A mg
C) 2T0 D) 2T0 0
p0 A mg p0 A ghA mg
SECTION – III
(INTEGER ANSWER TYPE)
17. The power radiated by a black body is P, and it radiates maximum energy around the
wave length 0 . If the temperature of black body is now changed so that it radiates
30 64 P
maximum energy around a wavelength , the new power radiated by it is n , then
4 81
find the value of ‘n’.
24
18. The potential difference VB VA for the circuit shown in the figure is V . Then find the
K
value of K .
19. In the setup shown, magnitude of the force F exerted on the block A is so adjusted that
the block B and the ball C remain motionless relative to the block A without contact
between A and C. All surfaces in contact are frictionless. Masses of the bodies are
mA 12 kg , mB 5 kg and mc 3 kg respectively. Acceleration of free fall is g 10 m / s 2 . The
necessary force F is 30 K Newton. Find K
20. A particle of mass m moving with velocity v makes a head-on elastic collision with a
stationary particle of mass 2m . Kinetic energy lost by the lighter particle during period of
k 2
deformation is mv . Find K
9
21. A disc of mass M 2.0 kg is connected with two identical discs each of mass m 1.0 kg
with the help of two light inextensible threads each of length l 50 cm .initially the system
rests on a frictionless horizontal floor with centers of the discs in a straight line and the
threads straight. Now the middle disc is projected along the floor with a velocity
u 2 m / s perpendicular to the threads. Find tensile forces in (Newtons) the threads when
the end discs are about to collide.
22. Top of a large block A of mass 4kg consists of a frictionless slope of height 40cm which
smoothly merges into a horizontal flat portion. The block rests on a frictionless
horizontal floor. When a small block B of mass 1.0 kg is released on the top of the slope,
it slides down the slope and then stops after sliding a distance 1.0 m on the horizontal
portion of the top of the block A. Find coefficient of friction between the block B and
horizontal portion of the top of the block A.
1 1 1 1
3 VI 3 3 (V VI ) 3 6 (V VI ) 3 6 VI 3
(A) (B) (C) (D)
2 NAn 2 NAn NAn NA n
2. Which of the following specie(s) is/are NOT having only one corner shared per tetrahedron.
(A) Si2O76– (B) Cr2O72– (C) S2O72– (D ) Si 3O96–
3. How many moles of sodium hydroxide can be added to 1.00 L of a solution 0.1 M in NH3 &
0.1 M in NH4Cl without changing the pOH by more than 1.00 unit ? Assume no change in
volume. Kb(NH3) = 1.8 × 10–5.
(A) 0.0818 moles (B) 0.0516 moles (C) 0.0718 moles (D) 0.0926 moles
4. The heat capacity of liquid water is 75.6 J/mol K, while the enthalpy of fusion of ice is
6.0 kJ/mol. What is the smallest number of ice cubes at 0°C, each containing 9.0 g of
water, needed to cool 500 g of liquid water from 20°C to 0°C?
(A) 1 (B) 7 (C) 14 (D) None of these
5.
18
(A) CH3–O– (B) CH 3– O –
18
(C) CH3– O –CH3 (D)CH3–O–CH3
9. Study the following figure and choose the correct options from the given below (assuming
both dissociate completely).
(A) There will be no movement from any solution across the membrane
(B) Osmotic pressure of 0.1 M Ba 3(PO4)2 will be higher than 0.1 M MgSO4 solution
(C ) There will be flow from right side of S.P.M. to that of left
(D) White precipitate (BaSO4) will not be formed in right side of the S.P.M.
10. Which of the following statements are correct about half life period ?
(A) It is proportional to initial concentration for a zero order reaction.
(B) Average life = 1.44 times half life for a first order reaction.
(C) Time of 75% reaction is thrice of half life period in second order reaction.
(D) 99.9% reaction which is first order, takes place in 100 minutes if the rate constant of the
reaction is 0.0693 min–1.
11. In the manufacturing of metallic sodium by fused salt–electrolysis method (Down’s
process), small amount of CaCl2 that added is known as auxiliary electrolyte and in
used to :
(A) improve the electrical conductance (B) decrease the melting point of NaCl
(C) stabilise the metallic sodium (D) increase the temperature of electrolysis
12. Correct water solubility order/is amongst the following pairs is/are.
(C) <
(D) >
Comprehansion :
Aldehydes and ketones react with oine molecule of analcohol to form compounds called
hemiacetals, in which there is one hydroyl group and one either-like group. Reaction of
a hemiacetal with a second molecule of alcohol gives an acetal and a molecule of water.
We study this reaction
Draw structural formulas for the hemicetal and acetal formed from these reagents. The
stoichiometry of each reaction is given in the problem.
(A)
(B)
(C)
13. Product P is -
14. Product Q is -
(A) (B)
(C) (D)
comprehension-2
The protective power of the lyophilic colloids is expressed in terms of gold number a
term introduced by Zsigmondy Gold number is the number of milligram of the protective
colloid which prevent the coagulation of 10 ml of red gold sol, when 1 ml of a 10 percent
solution of sodium chloride is added to it. Thus, smaller the gold number of lyophilic
colloid, the greater is the protective power.
15. On addition of one mL of solution of 10% NaCl to 10 mL of red gold sol in presence of
0.025 g of starch, the coagulation is just prevented. The gold number of starch is
(A) 0.025 (B) 0.25 (C) 2.5 (D) 25
16. Which of the following statement(s) is/are correct
(A) Higher the gold number, more to the protective power of colloid
(B) Lower the gold number, more the protective power
(C) Higher the coagulation value, more the coagulation power
(D) Lower the coagulation value, lower the coagulation power
Integer Type
17. The number of primary, secondary and tertiary amines possible with the molecular for-
mula C3H9N are x, y, z respectively then find x + y + z
18. Find out the total number of major products (including stereoisomers) are obtained in
each of the following reactions.
(i) (a) 1-butene + HCl x
(ii) 1-butene + HBr + peroxide y
Find the value of (x + y) ?
21. In a collection of H–atom, electrons make transition from 5th excited state to 2nd
excited state then maximum number of different types of photons observed are :
22. Igniting MnO2 in air converts it quantitatively to Mn 3O4. A sample of pyrolusite
has MnO2 80%, SiO2 15% and rest having water. The sample is heated in air to
constant mass. What is the % of Mn in ignited sample ?