Professional Documents
Culture Documents
Appleton Electric Apltonc00003 I7 I3 I10
Appleton Electric Apltonc00003 I7 I3 I10
Class I, Groups i
Class II, Groups E,F,G
c, D Sealing Fittings: EYS and ESU;
Class III Explosion-Proof, Dust-Ignition-Proof,
Raintight
UNILETS® for Use with Threaded Metal Conduit.
* U.L. Listed for use with Appleton "Kwiko" and Grouse-Hinds "Chico A" cement.
Features: All Fittings strict the passage of gases and explo- electroplate, (2) dichromate, and (3) epoxy
• Explosion-proof, dust-ignition-proof. sions in classified areas. powder coat, of steel have zinc electro-
• Smooth, rounded integral bushing in • Fiber Filler-makes dams around and be- plate, of aluminum 1/2" thru 2" have nat-
each hub protects conductor insulation. tween all conductors to prevent sealing ural finish and 2-1/2" thru 4" have epoxy
• Accurately tapped, tapered threads for compound from leaking while being powder coat.
tight, rigid joints and ground continuity. poured in its liquid state. • Sealing Fittings- EYSF/EYSM, ESUF/
Features: Non-Expansion Unions Features: Sealing Hubs ESUM, EYF/EYM, EYDM and SF/SFM,
OConcentric ring interlocked design of QUL Listed for use in hazardous locations EYD/EYS of malleable iron and Grayloy-
1/2", 3/4" and 1" sizes makes possible when Kwiko® Sealing Compound or iron have triple-coat-(l) zinc electroplate,
Grouse-Hinds Chico® A Sealing Com- (2) dichromate, and (3) epoxy powder
smaller diameter, allowing use in tighter
spaces. 1-1/4" and larger UNY sizes have pound are used to make the seal. coat, of Almag 35 aluminum have epoxy
powder coat.
removable male nipple. Features: Flexible Couplings
• Choice of malleable iron or aluminum. • Sealing Hubs- ES of malleable iron
©Heavy duty design resists mechanical have a triple-coat-(l) zinc electroplate, (2)
Features: Expansion Unions abuse. Watertight. dichromate, and (3) epoxy powder coat.
©One-piece design eliminates need for • Electrical conductivity equal to rigid con- • Flexible Couplings- EXGJH and EXLK
disassembly during installation. duit on a similar length basis—no bonding steel end fittings have zinc electroplate and
• Telescoping cylinder within cylinder de- jumper required. clear chromate, braid has natural finish.
sign permits expansion or contraction. • Interior insulating liner protects con- • Close-up Plugs- PLG of malleable iron
• Standard or long types available. ductors from abrasion under vibrating have a triple-coat-(l) zinc electroplate, (2)
• Small external diameters- excellent in conditions. dichromate, and (3) epoxy powder coat;
restricted areas in wiring of pumps, mo- • EXGJH- both end fittings are female, steel have zinc electroplate; aluminum
tors, and other equipment. each furnished with a removable male have natural finish.
• Internal phosphor bronze "bonding nipple. • Bell Reducers- BR of malleable iron
jumper" ring assures positive ground be- • EXLK- female end fitting with union at have a triple-coat-(l) zinc electroplate, (2)
tween telescoping cylinders. one end plus a female end fitting with a dichromate, and (3) epoxy powder coat;
removable male nipple at the other end. aluminum have natural finish.
Features: Sealing Fittings
© Raintight construction. Standard Materials • Elbows- EL and UNA are malleable
• Removable nipple in male sealing fitting • UNY and UNF (Non-Expansion) iron and have a triple-coat-(1) zinc elec-
may be used interchangeably in top or Unions, 1/2" thru 1": steel or aluminum. troplate, (2) dichromate, and (3) epoxy
bottom hub. 1-1/4" thru 6": malleable iron or aluminum. powder coat.
• EYS- for sealing vertical conduit. Large • UNY and UNF Expansion Unions: steel. • Combination Drain/Breathers- ECDB
opening for damming and filling. • UNL Unions: malleable iron and steel. are passivated stainless steel and have
• Expanded Fill EYSEF/EYDEF- allow up • EYSF/EYSM, EYF/EYM and EYDM a natural finish.
to 40% conduit fill in compliance with the Seals: malleable iron or Almag 35 Options
National Electrical Code. aluminum. • For ES Sealing Hubs, add suffix BLSG
• EYSF/EYSM- for sealing vertical con- • EYS, EYSEF/EYDEF, ESUF/ESUM for sealing gaskets and locknuts (provide
duit. Large opening for damming and filling. and SF/SFM Seals: malleable iron. a water and oil-tight connection).
• ESUF/ESUM for sealing vertical or hor- • EYD and EYS Seals: Grayloy-iron. • For EXGJH or EXLK Flexible Couplings,
izontal conduit. Pouring spout rotates 90°. • EXGJH and EXLK Couplings, 1/2" thru a pvc coating is available. Consult factory
Removable cover provides full access for 2": outer bronze braid, inner brass core for details and pricing.
damming. 2-1/2" thru 4" sizes have with insulating liner; 2-1/2" thru 4": outer Compliances
threaded cover openings for damming. stainless steel braid, inner stainless steel • UL Standard 886
• EYF/EYM- close radius type for sealing core with insulating liner. End Fittings: 1/2"
• Appleton malleable iron products con-
vertical or horizontal conduit runs. thru 2"-brass; 2-1/2" thru 4"-stainless
form to ASTM A47-77, Grade 32510,
• EYDM Drain Sealing Fittings- close steel.
which has the following properties: tensile
radius type for sealing vertical conduit • PLG Close-Up Plugs: malleable iron, strength, 50,000 psi; yield, 32,000 psi; and
runs. Access cover has drain valve for steel, or aluminum. elongation, 10%.
automatic draining of water accumulation • BR Reducers: malleable iron or • Appleton aluminum products are pro-
above the seal. aluminum. duced from a high strength copper-free
• SF/SFM Drain Sealing Fittings- for seal- • EL and UNA Elbows: malleable or cast (4/10 of 1% max.) alloy.
ing vertical conduit runs. Provide contin- iron. • Class I, Div. 1 & 2, and Class II, Div. 1
uous, automatic draining of water • ECDB Combination Drain/Breather: & 2, if installed as follows: Unions, Elbows,
accumulation above the seal. stainless steel. Plugs, Flex. Couplings— NEC 501-4
• Kwiko® sealing cement is a specially for- Standard Finishes (a)(b); Seals— NEC 501-5 (a)(b)(c)(d)(e)
mulated water soluble powder. Mixed to • Unions- UNY, UNF and UNL (Non-Ex- and NEC 502-5; Drains- NEC 501-5(f).
the proper proportions, it is poured in seal- pansion) and UNY and UNF (Expansion)
ing fittings and hardens to contain and re- of malleable iron have triplecoat-(l) zinc
Turnin
Radiu
i
A
I
EYSF and EYSM
B C Turning
Size (Length) (Width) (Hub CL) Radius*
A B C Turning
(Length) (Width) (Hub CL) Radius*
IV !
Turning 1/2
Radius - "7^J 3/4
3.25 1.13 1.81 8.3 2.9 4.6
TV
1-1/4 4.94 2.00 1.75 12.5 5.1 4.5
I \X A
i / 1-1/2 5.50 2.38 2.06 14.0 6.0 5.2
A I 2 6.13 2.88 2.31 15.6 7.3 5.9
I Without
Without Nipple \
Nipple 2-1/2 7.50 3.38 2.69 19.1 8.6 6.8
± 3 8.13 4.13 3.13 20.6 10.5 7.9
K-B-H 3-1/2 8.94 4.75 3.44 22.7 12.1 8.7
EYF/EYM EYF/EYM 4 9.38 5.13 3.69 23.8 13.0 9.4
1/2" thru 1" 1-1/4" thru 3" 5 10.81 6.25 4.69 27.5 15.9 11.9
6 11.81 7.31 5.38 30.0 18.6 13.7
EYS
1/2 3.69 1.50 1.16 9.4 3.8 2.9
Turning 3/4 3.69 1.50 1.25 9.4 3.8 3.2
Radius^U L_
1 4.31 1.75 1.38 11.0 4.4 3.5
1-1/4 5.06 2.19 1.75 12.9 5.6 4.4
IA / 1-1/2 5.50 2.44 2.06 14.0 6.2 5.2
I 2 6.25 3.00 2.31 15.9 7.6 5.9
Without 2-1/2 7.50 3.50 2.63 19.1 6.7
Nipple 8.9