Professional Documents
Culture Documents
Electrical Installation Level 2 Cl. 1 (June 2022) - Instructor
Electrical Installation Level 2 Cl. 1 (June 2022) - Instructor
MATERIAL LISTING
TOOLS/MATERIALS/EQUIPMENT
PROJECT
CANDIDATE’S NO.: _____________________________________
INSTITUTION: _____________________________________
TASK: Install outlet and lighting circuit according to schematic diagram given
Criteria N/D 1 2 3 4 5
1. Correct tools listed and selected
2. Correct materials listed, quantified, and selected
3. Instruction sheet/job task diagrams interpreted accurately
4. Circuit board marked out accurately
5. All accessories accurately and firmly mounted
6. Ends of conduits anchored securely to fittings and fixtures
7. Breakers of correct current rating installed
8. Cable installation stripped neatly without nicking conductor
9. Conductor terminations made with strands securely anchored
10. Terminations mechanically and electrically sound
11. 900 bend accurately made
12. Offset bends accurately made
13. Conduits strapped securely to surface
14. Polarity correct on all accessories
15. Circuit wiring free of open circuit
16. Circuit wiring free of short circuit
17. Correct earthing procedures followed
18. Correct safety procedures followed
19. Correct operational procedures observed
20. Materials used economically
21. Tasks carried out in an organised manner, and work area kept neat
and tidy
22. Tasks completed within time specified
23. Appropriate PPE selected and used correctly
Sub-Total
Total
Final Average Percentage Score (%)
Rating Scale
5. Can perform the task with initiative and adaptability to problem situations.
4. Can perform the task satisfactorily without assistance and/or supervision.
3. Can perform the task but requires periodic assistance and/or supervision.
2. Can perform limited parts of the tasks satisfactorily, requires considerable assistance.
1. Has not demonstrated sufficient evidence on which judgement can be made.
N/D Not demonstrated
PROJECT
INSTRUCTION TO CANDIDATES: Read the following guidelines carefully before you begin. If you
have any questions, direct them to your instructor.
ii. Examine and interpret the diagram, instructions, and specifications for the allotted tasks.
Tasks
Install a plug and lighting circuit according to the schematic diagram given.
(i) Lay out the electrical accessories as outlined on the diagram (dimensions are not drawn to
scale).
(iii) Connect the outlet circuit according to the Jamaican Standard and Institute of Electrical
Engineers (IEE) Regulations.
Note
(ii) Where measurements are not indicated, the most suitable alignment must be used.
(iii) You are also required to create a video lasting no longer than 20 minutes, demonstrating the
laying out and wiring of the circuit, which must be given to your instructor for uploading.