Professional Documents
Culture Documents
Sony MHC w555 Manual de Usuario
Sony MHC w555 Manual de Usuario
Sony MHC w555 Manual de Usuario
Mini Hi-Fi
Component
System
Operating Instructions
MHC-W555
©1998 by Sony Corporation
This stereo system is equipped with the Dolby* B-
WARNING type noise reduction system.
* Dolby noise reduction manufactured under
To prevent fire or shock hazard, do not license from Dolby Laboratories Licensing
expose the unit to rain or moisture. Corporation.
To avoid electrical shock, do not open the cabinet. “DOLBY” and the double-D symbol a are
Refer servicing to qualified personnel only. trademarks of the Dolby Laboratories Licensing
Corporation.
2
Table of Contents
Basic Operations
Other Features
Playing a CD ......................................... 11 Singing along: Karaoke ...................... 32
Recording a CD .................................... 13 Falling asleep to music ........................ 33
Listening to the radio ........................... 14 Waking up to music ............................. 34
Recording from the radio .................... 15 Timer-recording radio programs ....... 35
Playing a tape ........................................ 16 EN
Recording from a tape ......................... 17
Additional Information
Precautions ............................................ 36
The CD Player
Troubleshooting ................................... 37
Using the CD display ........................... 19 Specifications ........................................ 40
Playing the CD tracks repeatedly ...... 19 Index ....................................................... 42
Playing the CD tracks in random
order ................................................ 20
Programming the CD tracks ............... 21
Playing CDs without interruption ..... 22
DJ Effects
Looping part of a CD ........................... 26
Flashing part of a CD ........................... 26
3
Getting Started
AM loop antenna
FM antenna
Right Speaker 6 Left Speaker
1 3
2 4
2 5 2
‘
’
AUTO indicator
SLIDING SENSOR OPEN/CLOSE
continued
5
Step 1: Hooking up the system
(continued) 1 Press CLOCK/TIMER SET.
The hour indication flashes.
When carrying this system RELAY TUNED DBFB
t DAILY 1 2 REC SLEEP STEREO
Do the following to protect the CD a
ß
DOLBY NR
MONO
SYNC
SUR
REC
mechanism. PROGRAM
SHUFFLE
STEP
kHz
REPEAT1 MHz VOLUME
a
MONO
DOLBY NR
SYNC
REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
5 Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
Step 2: Setting the If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
time Note
The previous explanation shows you how to set the
time while the power is off. To change the time
You must set the time before using the timer while the power is on, do the following:
functions. 1 Press CLOCK/TIMER SET.
2 Turn the jog dial to select SET CLOCK.
1 2,4 3,5 3 Press ENTER/NEXT.
4 Perform steps 2 through 5 above.
DSP
CD
6
Step 3: Presetting 3 Press TUNING MEMORY.
A preset number appears in the display.
radio stations Preset number
RELAY TUNED
t DAILY 1 2 REC SLEEP ß STEREO SUR
You can preset up to 40 stations, 20 for FM, 10 1 DOLBY NR
ALL 1 DISC S
MONO
SYNC
REC
1/u
(power) 4 2 5 31 4 Turn the jog dial to select the preset
number you want.
5 Press ENTER/NEXT.
The station is stored.
DSP
7
Connecting an MD deck for analog
Connecting optional recording
Make sure to match the color of the plugs and
AV components the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until “MD” appears.
To enhance your system, you can connect
optional components. Refer to the To the audio output To the audio input
instructions of each component. of the MD deck of the MD deck
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
Note
If you cannot select “MD” even when you have
pressed FUNCTION, press 1/u (power) while
pressing FUNCTION when the power is turned off.
“VIDEO 1” will be switched to “MD”. To return to
“VIDEO 1”, do the same procedure.
8
Connecting a super woofer Connecting a video game
speaker player
You can connect an optional super woofer
speaker. You can enjoy video games with audio
emphasis by connecting a video game player.
To super woofer
To listen to and watch a video game, press
FUNCTION repeatedly until “VIDEO 2”
appears.
Press OPEN/CLOSE or place your hand to
the sliding sensor to slide the panel. Connect
a video game player as shown below:
Connecting a VCR EQ
Note
The sliding panel does not close when the AV
INPUT jacks are connected.
continued
9
Connecting optional AV
components (continued)
Connecting outdoor
antennas
Connect the outdoor antenna to improve the
reception.
FM antenna
Connect the optional FM outdoor antenna.
You can also use the TV antenna instead.
Screw clamp
75-ohm coaxial cable
(not supplied) AM
FM
75Ω
AM antenna
Connect a 6- to 15- meter (20- to 50- feet)
insulated wire to the AM antenna terminal.
Leave the supplied AM loop antenna
connected.
Screw clamp
AM
FM
75Ω
Ground wire
(not supplied)
Important
If you connect an outdoor antenna, ground
from y terminal with the screw clamp. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
10
Basic Operations
CD
2 Press one of the DISC 1~3 buttons.
The disc tray closes and play starts.
If you press ·P (or CD ( on the
remote), play starts from the CD loaded
DISC SKIP/ on the tray whose button is lit green.
EX-CHANGE 2 1
Basic Operations
Disc tray number Playing time
Track number
VOL +/–
continued
11
Playing a CD (continued) Tips
• Pressing ·P when the power is off
automatically turns the power on and starts CD
To Do this playback if there is a CD in the tray (One Touch
Play).
Stop play Press p (p on the remote). • You can switch from another source to the CD
Pause Press ·P (P on the remote). player and start playing a CD just by pressing
Press again to resume play. ·P or the DISC 1~3 buttons (Automatic Source
Selection).
Select a track During play or pause, turn the
• If there is no CD in the player, “CD NO DISC”
jog dial clockwise (to go
appears in the display.
forward) or counterclockwise
• When a disc tray is selected or the CD placed on
(to go back) and release it
that tray is playing, the DISC 1~3 button for the
when you reach the desired
respective tray lights green.
track. (Or press + (to go
forward) or = (to go back)
on the remote.)
Find a point in Press and hold down ) or
a track 0 (or )/0 on the
remote) during play and
release it at the desired point.
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP/EX-CHANGE.
Play only the Press PLAY MODE
CD you have repeatedly until “1 DISC”
selected appears.
Play all CDs Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Remove the CD Press OPEN/CLOSE 6.
Exchange other Press DISC SKIP/
CDs while EX-CHANGE.
playing
Adjust the Turn VOLUME (or press VOL
volume +/– on the remote).
12
Recording a CD 2 Press OPEN/CLOSE 6 and place a
CD.
— CD Synchro Recording Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
The CD SYNCHRO button lets you record
EX-CHANGE repeatedly so that it lights
from a CD to a tape easily. You can use TYPE
green.
I (normal) or TYPE II (CrO2) tapes. The
recording level is adjusted automatically.
DISC SKIP/
EX-CHANGE 2 With the label
side up. When
you play a CD
single, place it on
the inner circle of
the tray.
3 Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. ·
(for front side) lights up.
DOLBY NR
Basic Operations
3 54 1 4 Press DIRECTION MODE
repeatedly to select A to record on
one side. Select ß (or RELAY) to
1 Press § and insert a blank tape into
record on both sides.
deck B.
With the side 5 Press P PAUSE on deck B.
you want to
record facing
Recording starts.
forward
ª AUTO REVERSE ·
To stop recording
Press π on deck B or p on the CD player.
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing CD
SYNCHRO.
Notes
• You cannot listen to other sources while recording.
• Dolby NR and DIRECTION MODE (ß or
RELAY) is off when the mains AC power supply
is switched off.
13
Listening to the radio 2 Turn the jog dial (or press = or
+ on the remote) to tune in the
–– Preset Tuning desired preset station.
RELAY TUNED
t DAILY 1 2 REC SLEEP ß STEREO SUR
1
MONO
DOLBY NR
SYNC
ALL 1 DISCS REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
DSP
To Do this
CD
TUNER/BAND
To listen to non-preset radio
stations
Use manual or automatic tuning. For manual
tuning, press 0 – or ) + repeatedly. For
automatic tuning, press and hold 0 – or
) +.
Tips
• Pressing TUNER BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
VOL +/– just by pressing TUNER BAND (Automatic Source
Selection).
• When an FM program is noisy, press STEREO/
MONO so that “MONO” appears in the display.
There will be no stereo effect, but the reception
will improve. Press the button again to restore the
1 Press TUNER BAND repeatedly stereo effect.
• To improve broadcast reception, reorient the
until the band you want appears in
supplied antennas.
the display.
Every time you press the button, the
band changes as follows:
FM n MW n SW
n
14
Recording from the 3 Press § and insert a blank tape into
deck B.
radio With the side
you want to
record facing
You can record the radio program on a tape forward
by calling up a preset station. You can use ª AUTO REVERSE ·
1/u
(power) 2 1 4 Press r REC.
Deck B stands by for recording.
CD
6 Press P PAUSE on deck B.
Recording starts.
Basic Operations
To stop recording
Press π on deck B.
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use 0 – and ) +
DOLBY NR
465 3 to tune in the desired station manually.
• When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
1 Press TUNER BAND to select the “DOLBY NR ON” appears after pressing r REC.
• If noise is heard while recording from the radio,
band you want. move the respective antenna to reduce the noise.
RELAY TUNED
t DAILY 1 2 REC SLEEP ß STEREO SUR
1
MONO
DOLBY NR
SYNC
ALL 1 DISCS REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
15
Playing a tape 1 Press § and insert a recorded tape
in deck A or B.
With the side
You can use any type of tape, TYPE I you want to
play facing
(normal), TYPE II (CrO2) or TYPE IV (metal) , forward
since the deck automatically detects the tape ª AUTO REVERSE ·
3 Press ·.
Press ª to play the reverse side. The
DSP
CD
VOL +/–
16
Tips
• Pressing · or ª when the power is off
automatically turns the power on and starts tape
Recording from a
playback if there is a tape in the deck (One Touch
Play).
tape
• You can switch from another source to the tape — High-speed Dubbing
deck just by pressing · or ª (Automatic Source
Selection).
• If the tape you want to play is recorded with You can use TYPE I (normal) or TYPE II
DOLBY NR, you can reduce the noise by pressing (CrO2) tapes. The recording level is
the DOLBY NR so that “DOLBY NR ON” appears. automatically adjusted.
• When dubbing tapes originally recorded with
Dolby NR B, the dubbed tape is automatically
1/u
played with Dolby NR B. (power)
Basic Operations
Example: searching forward 2 songs
RELAY TUNED
t DAILY 1 2 REC SLEEP ß STEREO
MONO
SUR
DOLBY NR
SYNC
ALL 1 DISC
DISCS REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
Notes
• The AMS function may not operate correctly
under the following circumstances:
– When the unrecorded space between songs is
less than 4 seconds long. DOLBY NR
– If completely different information is recorded
on the left and right channels.
1 2 43 1
– When there are continuous sections of
extremely low level or low frequency sound 1 Press § and insert a recorded tape
(like those of a baritone sax). in deck A and a blank tape in deck
– When the unit is placed near a television. (In
this case, we recommend moving the unit B.
farther away from the television or turning off With the side
the television.) you want to
• Dolby NR and DIRECTION MODE (ß or play/record
RELAY) is off when the mains AC power supply facing forward
ª AUTO REVERSE ·
is switched off.
continued
17
Recording from a tape (continued)
4 Press P PAUSE.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION MODE to ß when the
tapes you use have different lengths, the tape in
each deck reverses independently. If you select
RELAY, the tapes in both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Note
Dolby NR and DIRECTION MODE (ß or RELAY)
is off when the mains AC power supply is switched
off.
18
The CD Player
1/u
(power) REPEAT PLAY MODE
DSP
CD
DSP
CD
19
To cancel Shuffle Play
Playing the CD tracks Press PLAY MODE repeatedly until
“SHUFFLE” or “PROGRAM” disappears
in random order from the display. The tracks continue playing
in their original order.
–– Shuffle Play
To select a desired CD
You can play all the tracks on one CD or all Press DISC 1~3.
CDs in random order.
Tips
1/u
(power) 12 • You can start Shuffle Play during normal play by
pressing PLAY MODE repeatedly to select
“SHUFFLE”.
• To skip a track, turn the jog dial clockwise (or
press + on the remote).
DSP
CD
DISC 1-3
3
1 Press FUNCTION repeatedly until
“CD” appears in the display, then
place a CD.
3 Press ·P.
“J” appears and then all the tracks play
in random order.
20
Programming the CD 1 Press FUNCTION repeatedly until
“CD” appears in the display, then
tracks place a CD.
–– Program Play
2 Press PLAY MODE repeatedly until
You can make a program of up to 32 tracks “PROGRAM” appears in the
from all the CDs in the order you want them display.
to be played.
1/u
3 Press one of the DISC 1~3 buttons to
(power) 12 45 select a CD.
1
MONO
DSP DOLBY NR
SYNC
ALL 1 DISC REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
CD
Track number
5 Press ENTER/NEXT.
The track is programmed. “STEP” and
the programmed playing order appear,
followed by the total playing time.
Total playing time
RELAY TUNED
t DAILY 1 2 REC SLEEP ß STEREO SUR
1
MONO
DOLBY NR
SYNC
ALL 1 DISC REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
continued
21
Programming the CD tracks
(continued) Playing CDs without
To Press interruption
Check the program CHECK on the remote
repeatedly. After the last –– Non-Stop Play
track, “CHECK END”
appears.
You can play CDs without pausing between
tracks.
Clear a track from CLEAR on the remote in
the end stop mode. 1/u
Clear a specific CHECK on the remote (power) 1 2 3
track repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the 1 Select the disc tray with a
program DISC 1~3 button.
2 Select the track by DSP
Tips
• The program you made remains in the CD player
even after it has been played back. Press ·P to
play the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20
– the total playing time has exceeded 100 minutes.
3 Press ·P.
22
The Tape Deck
Note
Dolby NR and DIRECTION MODE (ß or RELAY)
is off when the mains AC power supply is switched
off.
DOLBY NR
35 4 1
1 Insert a blank tape into deck B.
3 Press r REC.
Deck B stands by for recording. · (for
front side) lights up.
23
Recording a CD by 1 Place a CD and insert a blank tape
into deck B.
specifying track order
— Program Edit
2 Press FUNCTION repeatedly until
“CD” appears in the display.
You can record tracks from all the CDs in the
order you want. When programming, make 3 Press PLAY MODE repeatedly until
sure the playing times for each side do not “PROGRAM” and “DISC” appear in
exceed the length of one side of the tape. the display.
1/u
(power) 2 3 56 1 4 Press one of the DISC 1~3 buttons to
select a CD.
RELAY TUNED
CD t DAILY 1 2 REC SLEEP ß STEREO SUR
1
MONO
DOLBY NR
SYNC
ALL 1 DISC REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
Track number
6 Press ENTER/NEXT.
The track is programmed. “STEP” and
the programmed playing order appear,
followed by the total playing time.
Total playing time
RELAY TUNED
t DAILY 1 2 REC SLEEP
4 11 1
ß STEREO SUR
1
MONO
DOLBY NR
SYNC
ALL 1 DISC REC
PROGRAM STEP
SHUFFLE kHz
10 12
REPEAT1 MHz VOLUME
24
8 Press P on the remote to insert a
Selecting tape length
pause at the end of side A. automatically
“P” appears in the display and the total — Tape Select Edit
playing time resets to “0.00” in the
display. You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing more
9 Repeat steps 5 and 6 for tracks from than 20 tracks.
the same disc or steps 4 to 6 for
tracks from another disc to program 1 Insert a CD.
the remaining tracks to be recorded
on side B.
2 Press FUNCTION repeatedly until
“CD” appears in the display.
10 Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. ·
3 Press EDIT once so that “EDIT”
(for front side) lights up. flashes. The required tape length for
the currently selected CD appears,
11 Press DIRECTION MODE followed by the total playing time
repeatedly to select A to record on for side A and side B respectively.
one side. Select ß (or RELAY) to
record on both sides. Note
You cannot use this function after programming. In
12 Press P PAUSE on deck B. order to use this function, you must first cancel the
Recording starts. program by pressing PLAY MODE repeatedly until
“PROGRAM” or “SHUFFLE” disappears from the
display.
To stop recording
Press π on the deck B or p on the CD player.
Tip
When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
“DOLBY NR” appears after pressing CD
SYNCHRO.
25
DJ Effects
With the loop function, you can repeat part of With the flash function, you can “flash” the
a CD during playback. This lets you create CD sound during playback. This lets you
original recordings. create original recordings.
1/u 1/u
(power) LOOP jog dial (power) FLASH jog dial
DSP DSP
CD CD
/ Press and hold LOOP (or LOOP on / Press and hold FLASH (or FLASH
the remote) during playback at the on the remote) during playback at
point you want to start the Loop the point you want to start the Flash
function, and release to resume function, and release to resume
normal play. normal play.
Notes
• The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
• To record the flash effect, use the analog MD/
VIDEO 1 OUT connections or this unit’s tape deck.
26
Sound Adjustment
For a powerful sound (GROOVE)
Adjusting the sound Press GROOVE. The volume switches to
power mode, DBFB is automatically set to full
strength, the equalizer curve changes, and the
GROOVE button lights up. Press GROOVE
You can reinforce the bass, create a more
again to return to the previous volume.
powerful sound, and listen with headphones.
1/u
Notes
(power) DBFB • With some songs, the music will sound distorted
when you use the DBFB system with the graphic
equalizer if the bass is too strong. Adjust the bass
slowly while listening to music so that you can
monitor the effect of the adjustment.
• Canceling GROOVE sets DBFB to DBFB LOW and
flattens the equalizer curve. Press DBFB +/– to
adjust DBFB level. Adjust the equalization to
DSP
obtain the effect you desire.
CD
To listen through the headphones
Connect the headphones to PHONES jack. No
sound will come from the speakers.
PHONES GROOVE
EQ
27
To cancel the effect
Selecting the audio Press EFFECT ON/OFF repeatedly (or FILE
SELECT ON/OFF on the remote) so that
emphasis “EFFECT OFF” appears in the display.
BATTLE
ADVENTURE
PLACE DISCO Special listening
23 CLUB
LIVE HOUSE
locations
CHURCH
1 Press MOVIE, MUSIC, GAME, or CONCERT HALL
PLACE to select a menu. P FILE P FILE 1 ~ 5 Personal music
See the chart “Music menu options” file
below. The last effect chosen from that
menu appears in the display.
To change the spectrum analyzer
2 Use the jog dial (or press FILE display
SELECT V/v on the remote Press DISPLAY/DEMO repeatedly to select
one of the displays below.
repeatedly) to select the preset you
desire. Spectrum analyzer
The preset name appears in the display. t DAILY 1 2 REC SLEEP
RELAY
ß
TUNED
STEREO SUR
1
MONO
DOLBY NR
SYNC
ALL 1 DISC REC
PROGRAM STEP
3 Press ENTER/NEXT.
SHUFFLE
REPEAT1
kHz
MHz VOLUME
1
MONO
DOLBY NR
SYNC
ALL 1 DISC REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
Note
The spectrum analyzer display changes each time
you cycle through the information display (e.g.
function n clock n effect)
28
Activating the surround
Adjusting the audio effect
emphasis You can enjoy the surround effect.
ranges.
Before operation, first select the audio
CD
1/u
(power) 3 2 SURROUND +/–
EQ
EQ
Note
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
4 Press ENTER/NEXT.
The adjusted sound effects are stored
under the selected file number. The
settings previously stored at this
DSP memory location are erased and
replaced by the new settings.
CD
NAME IN CHAR
EQ
DELETE
INSERT 2
30
Naming the personal file To call up the personal file
1 Press OPEN/CLOSE or place your hand to 1 Press P FILE to display the last selected
the sliding sensor to slide the panel. Press personal file.
NAME IN. 2 Use the jog dial (or press FILE SELECT
TUNED
V/v on the remote repeatedly) to select the
t DAILY 1 2 REC SLEEP
1
ß
DOLBY NR
STEREO
MONO
SYNC
personal file you desire.
ALL 1 DISC REC
PROGRAM
SHUFFLE
STEP
kHz
VOLUME
3 Press ENTER/NEXT.
REPEAT1 MHz
You don’t need to press ENTER/NEXT
2 Use the jog dial to select the file number when you use the remote.
you want to name.
Tip
3 Press ENTER/NEXT.
The programmed P file will be retained for a day if
t DAILY 1 2 REC SLEEP ß
TUNED
STEREO SUR
the power cord is unplugged or there is a power
1
MONO
DOLBY NR
ALL 1 DISCS
SYNC
REC
failure.
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
31
Other Features
CD
DSP
2 CD
Effect (or P FILE) name select the source you desire and set
N
or “EFFECT ON (OFF)”
it to pause mode.
The h indicator appears in the display
when a karaoke mode is activated. 2 Do the above steps 1 to 5. Then,
To sing karaoke with decreasing the insert a tape in deck B.
vocal level of a CD, select KARAOKE
PON. To sing karaoke of multiplex CD
or tape, select MPX RIGHT or MPX
LEFT.
32
3 Press r REC.
Falling asleep to
4 Press P PAUSE. music
— Sleep Timer
5 Start playing the source selected in
step 1. You can let the system turn off at the preset
Playback starts. Start singing along with time, so you can sleep to the music. You can
the music. preset the time to be turned off by 10
minutes.
To stop recording
Press π on deck B. SLEEP
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
CD function and not playing a CD.
Notes
• If you press EFFECT ON/OFF or recall a sound
effect, the karaoke mode is cancelled.
• The instrumental sound may be reduced as well as
the singer’s voice when the sound is recorded in
monaural.
• The singer’s voice may not be reduced when:
– only a few instruments are playing
– a duet is being played
– the source has strong echoes or chorus / Press SLEEP on the remote.
– the singer’s voice deviates from the center.
Every time you press the button, the
– the voice on the source is singing in high
minute display (the turn-off time)
soprano or tenor.
changes as follows:
AUTO n 90min n 80min n 70min
n … n 10min n OFF n AUTO …
33
Waking up to music 5 Set the time to start playback.
Turn jog dial to set the hour, then press
— Wake-up Timer ENTER/NEXT.
The minute indication starts flashing.
1
MONO
DOLBY NR
SYNC
every day. Make sure you have set the clock ALL 1 DISCS
PROGRAM
REC
STEP
SHUFFLE kHz
(see “Step 2: Setting the time”). REPEAT1 MHz VOLUME
DSP
3 2 N TAPE PLAY N
34
Timer-recording radio 4 Set the time to start recording.
Turn jog dial to set the hour, then press
programs ENTER/NEXT.
The minute indication starts flashing.
1
MONO
station (see “Step 3: Presetting radio DOLBY NR
ALL 1 DISCS
SYNC
REC
PROGRAM STEP
1
MONO
DOLBY NR
SYNC
ALL 1 DISCS REC
PROGRAM STEP
SHUFFLE kHz
REPEAT1 MHz VOLUME
35
Additional Information
Cleaning the cabinet
Precautions Use a soft cloth slightly moistened with mild
detergent solution.
To remove the speaker grille
On operating voltage Use both hands and pull the grille straight forward
to prevent the ribs from breaking.
Before operating the system, check that the
operating voltage of your system is identical with
the voltage of your local power supply.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
• Unplug the system from the wall outlet (mains) if To save a tape permanently
it is not to be used for an extended period of time. To prevent a tape from being accidentally recorded
To disconnect the cord (mains lead), pull it out by over, break off the cassette tab from side A or B as
the plug. Never pull the cord itself. illustrated.
• Should any solid object or liquid fall into the
component, unplug the stereo system and have
the component checked by qualified personnel
before operating it any further.
• The AC power cord must be changed only at the
qualified service shop. Detector slots
On placement
• Place the stereo system in a location with adequate Tab of side B Tab of side A
ventilation to prevent heat build-up in the stereo
system.
• Do not place the unit in an inclined position.
• Do not place the unit in locations where it is; Side A
— Extremely hot or cold
— Dusty or dirty Break off the
— Very humid cassette tab
— Vibrating of side A
— Subject to direct sunlight
On operation
• If the stereo system is brought directly from a cold
If you later want to reuse the tape for recording,
to a warm location, or is placed in a very damp
cover the broken tab with adhesive tape. However,
room, moisture may condense on the lens inside
be careful not to cover the detector slots which
the CD player. Should this occur, the system will
allow the tape player to automatically detect the
not operate properly. Remove the CD and leave
type of tape.
the system turned on for about an hour until the
moisture evaporates. Tape type:
• When you move the system, take out any discs. CrO2/Metal Normal
continued
37
Troubleshooting (continued) Speakers
Sound comes from one channel or
There is severe hum or noise. unbalanced left and right volume.
•A TV or VCR is placed too close to the •Check the speaker connection and
stereo system. Move the stereo system speaker placement.
away from the TV or VCR.
Sound lacks bass.
The sound from the connected source is •Check that the speaker’s + and – jacks are
distorted. connected correctly.
•If “VIDEO 1” appears in the display
when you press FUNCTION, switch the
display to “MD” (see “Notes: Connecting
a VCR” on page 9). CD Player
The timer does not function.
The CD tray does not close.
•Set the clock correctly.
•The CD is not placed properly.
DAILY1, DAILY 2, and REC do not appear
when you press the TIMER SELECT button. The CD will not play.
•Set the timer correctly. •The CD is not lying flat in the disc tray.
•Set the clock. •The CD is dirty.
•The CD is inserted label side down.
The remote does not function. •Moisture condensation has built up.
•There is an obstacle between the remote Remove the CD and leave the system
and the system. turned on for about an hour until the
•The remote is not pointing in the moisture evaporates.
direction of the system’s sensor.
Play does not start from the first track.
•The batteries have run down. Replace the
batteries. •The player is in program or shuffle mode.
Press PLAY MODE repeatedly until
There is acoustic feedback. “PROGRAM” or “SHUFFLE” disappear.
•Decrease the volume level. “OVER” is displayed.
•Move the microphone away from the •You have reached the end of the CD.
speakers or change the direction of the Press and hold 0 to return.
microphone.
The color irregularity on a TV screen
persists.
•Turn off the TV set once, then turn it on
after 15 to 30 minutes. If the color
irregularity still persists, place the
speaker farther away from the TV set.
38
Tape Deck Tuner
The tape does not record. Severe hum or noise (“TUNED” or
•No tape in the cassette holder. “STEREO” flashes in the display.)
•The tab has been removed from the •Adjust the antenna.
cassette (see “To save a tape •The signal strength is too weak. Connect
permanently” on page 36). the external antenna.
•The tape has reeled to the end.
A stereo FM program cannot be received in
The tape does not record nor play or there stereo.
is a decrease in sound level. •Press STEREO/MONO so that “STEREO”
•The heads are dirty. Clean them (see appears.
“Cleaning the tape heads” on page 37).
•The record/playback heads are
magnetized. Demagnetize them (see If other troubles not described
“Demagnetizing the tape heads” on page above occur, reset the system as
37). follows:
The tape does not erase completely. 1 Unplug the power cord.
•The record/playback heads are 2 Plug the power cord back in.
magnetized. Demagnetize them (see 3 Press DISPLAY/DEMO, ENTER/NEXT,
“Demagnetizing the tape heads” on page and EDIT at the same time.
37).
There is excessive wow or flutter, or the
sound drops out.
•The capstans or pinch rollers are dirty.
Clean them (see “Cleaning the tape
heads” on page 37).
Noise increases or the high frequencies are
erased.
•The record/playback heads are
magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
37).
After pressing ( (9) or §, there is a
mechanical noise, “EJECT”appears in the
display, and the unit enters standby mode
automatically.
•The cassette tape was not inserted
correctly. Eject the tape and turn the
power back on.
39
CD player section
Specifications System Compact disc and digital
audio system
Laser Semiconductor laser
Amplifier section (λ=780nm)
Emission duration:
The following measured at AC 230 V, 50/60 Hz continuous
DIN power output (rated) Laser output Max. 44.6 µW*
95 + 95 watts *This output is the value
(6 ohms at 1 kHz, DIN) measured at a distance of
Continuous RMS power output 200 mm from the
110 + 110 watts objective lens surface on
(6 ohms at 1 kHz, the Optical Pick-up Block
10% THD) with 7 mm aperture.
The following measured at AC 120, 220, 240 V, 50/ Frequency response 20 Hz – 20 kHz (±1 dB)
60 Hz Wavelength 780 – 790 nm
DIN power output (rated) Signal-to-noise ratio More than 90 dB
100 + 100 watts Dynamic range More than 90 dB
(6 ohms at 1 kHz, DIN) CD OPTICAL DIGITAL OUT
Continuous RMS power output (reference) (Square optical connector jack, rear panel)
120 + 120 watts Wavelength 600 nm
(6 ohms at 1 kHz, Output Level –18 dBm
10% THD)
Peak music power output 2000 watts
Inputs MD/VIDEO 1 IN (phono Tape player section
jacks): voltage 450/250 Recording system 4-track 2-channel stereo
mV, impedance 47 Frequency response 40 – 13,000 Hz (±3 dB),
kilohms (DOLBY NR OFF) using Sony TYPE I
AV INPUT AUDIO cassette
(phono jacks): 40 – 14,000 Hz (±3 dB),
voltage 250 mV, using Sony TYPE II
impedance 47 kilohms cassette
MIX MIC (phono jack): Wow and flutter ±0.15% W.Peak (IEC)
sensitivity 1 mV, 0.1% W.RMS (NAB)
impedance 10 kilohms ±0.2% W.Peak (DIN)
Outputs MD/VIDEO 1 OUT
(phono jacks): voltage
450/250 mV, impedance
1 kilohm
PHONES (stereo phone
jack): accepts headphones
of 8 ohms or more.
FRONT SPEAKER:
accepts impedance of 6 to
16 ohms
REAR SPEAKER: accepts
impedance of 16 ohms
SUPER WOOFER:
voltage 1 V, impedance
1 kilohm
Video section
Inputs AV INPUT VIDEO
(phono jack):
1 Vp-p, 75 ohms
Outputs MONITOR OUT
(phono jack):
1 Vp-p, 75 ohms
40
Tuner section General
FM stereo, FM/AM superheterodyne tuner Power requirements 120 V , 220 V or 230 -
240 V AC, 50/60 Hz
FM tuner section Adjustable with voltage
selector
Tuning range 87.5 – 108.0 MHz Power consumption 240 watts
Antenna FM lead antenna Dimensions (w/h/d) STR-W555
Antenna terminals 75 ohm unbalanced Approx. 288x 205 x 375
Intermediate frequency 10.7 MHz mm
HTC-W555
AM tuner section Approx. 288 x 205 x 360
Tuning range MW: mm
531 – 1,602 kHz Mass STR-W555 : Approx. 7.8
(with the MW tuning kg
interval set at 9 kHz) HTC-W555 : Approx. 4.4
530 – 1,710 kHz kg
(with the MW tuning Supplied accessories: AM loop antenna (1)
interval set at 10 kHz) Remote RM-SR5 (1)
SW: Size AA (R6) batteries (2)
5.95 – 17.90 MHz FM lead antenna (1)
(with the SW tuning Speaker cords (2)
interval set at 5 kHz) Speaker pads (8)
Intermediate frequency 450 kHz
Antenna AM loop antenna
External antenna terminal Design and specifications are subject to change
without notice.
Speaker
SS-W777G
Speaker system 4-way, 5-unit,
bass-reflex type,
magnetically shielded
type
Speaker units
Woofer: 20 cm dia., cone type
Center Tweeter: 3 cm dia., dome type
Side Tweeter: 5 cm dia., cone type x 2
Super Tweeter: 2 cm dia., dome type
Nominal impedance 6 ohms
Dimensions (w/h/d) Approx. 227 x 410 x 340
mm
Mass Approx. 6.5 kg net per
speaker
41
K R
Index Karaoke 32 Radio stations
presetting 7
L, M tuning in 14
A Recording
Loop 26
Adjusting a CD 13
the audio emphasis 29 a radio program 15
the sound 27
N timer recording 35
the volume 12, 14, 16 Non-Stop Play 22 Repeat Play 19
Antennas 5, 10 Normal Play 11 Resetting the system 39
Automatic Source Selection
12, 14, 17 O S
Automatic sliding sensor 5
One Touch Play 12, 14, 17 Saving recordings 36
Selecting the audio emphasis
B 28
P,Q
Batteries 5 Setting the time 6
Personal file 30 Shuffle Play 20
Playing Sleep Timer 33
C
a CD 11 Sound adjustment 27
CD player 11, 19 a preset radio station 14 Speakers 4, 9
CD Synchro Recording 13 a tape 16
Clock setting 6 tracks in random order
T, U, V
Connecting. See Hooking up (Shuffle Play) 20
tracks in the desired Timer
D order (Program Play) 21 falling asleep to music
tracks repeatedly 33
Display 5, 19, 28 (Repeat Play) 19 timer recording 35
without interruption waking up to music 34
E (Non-Stop Play) 22 Troubleshooting 37
Presetting radio stations 7 Tuner 7, 14
Edit 25, 39
Preset tuning 14 Tuning interval 7, 41
Program Play 21
F, G Protecting recordings 36 W, X, Y, Z
Flash 26
Wake-up timer 34
H, I, J
Hooking up
optional components 8
optional speakers 8, 9
the antennas 5, 10
the power 5
the system 4
42
43
Sony Corporation Printed in Vietnam
44