Professional Documents
Culture Documents
Simple Manual For Fingerprint USB Flash Drive
Simple Manual For Fingerprint USB Flash Drive
1. Software setup
First, to apply this fingerprint USB flash drive, user needs to install the
2. Initial use
a) Plug in and open the usb, then open the fingerprint identifying
software you just installed on your device, for the first time you
your usb drive for 10 times repeatedly. It will tells you when it’s
Note: The first one who sets the fingerprint will be the default
3. Verify login
Insert the USB flash drive, open the document then there will be a
successful. Managers and other users finger print can be single delete or
delete together, but single delete function can not delete the last
managers and other users will be deleted, then the fingerprint function
will return to the initial state. when open the document again will enter
Pic.3 Pic.4
4. Administration Authority
here.
administrator, whose Admin. column shows “ON”, can edit the user
corresponding trash icon. But have to click the icon marked with red
on the picture 6 if you want to delete the last user. The system will
prompt“ Delete All User?”, then click “OK”, all the users in the list
will be deleted.
Pic.5 Pic.6
5. Add Fingerprint
Click"+"(in the red frame like picture 7), it will show a message"
admin’s.
Pic.7 Pic.8
6. Language Selection
Select the bottom right corner in picture 9(the yellow square area)with
a left mouse click, and that will open the language selection interface.
Pic.9 Pic.10
7. Specifications
Unit dimension: 72.1*19.0*6.9mm
Interface: USB3.0
8. Range of Application
Humidity:20%RH-85%RH
9. Warranty
One year limited warranty (artificial damage and unwise application not
included).