Professional Documents
Culture Documents
Air Cooled Packaged - IE3
Air Cooled Packaged - IE3
Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.
AIR CONDITIONERS
shock, fire or explosion.
Read the user's manual carefully before using this product. The user's manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
FLOOR STANDING TYPE
DUCT TYPE
Cautions on product corrosion
1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.
2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install
COOLING ONLY 50Hz
the outdoor unit close to the sea shore, contact your local distributor.
DUCT TYPE
FDR05-20NY1G (IE3 Motor)
f o r
a b le s
u i t orie
S act
f
FLOOR STANDING TYPE
Specifications, designs and other content appearing in this brochure are current as of September 2018 but subject to change without notice. DIRECT AIR BLOW TYPE DUCT CONNECTION TYPE
FVGR05-10NV1 FVPGR10-20NY1G (IE3 Motor)
c All rights reserved
AK
for Factories and Offices Comfortable factory air conditioning using multiple indoor
units installed in accordance with the space.
Installation is next to walls, so units will not affect the
factory layout even if the changes are made.
Comfortable air conditioning of the entire factory by connecting a
blow duct at the top of the indoor unit.
Product Line Up
FLOOR STANDING TYPE Cooling only
50Hz
HP 5 6 8 10 13 15 18 20 Nice,
14.7 17.6 23.5 29.3 35.2 46.9 52.8 58.6
Capacity
1, 2
kW
Btu/h 50,000 60,000 80,000 100,000 120,000 160,000 180,000 200,000
cool air in the factory
kcal/h 12,600 15,100 20,200 25,200 30,200 40,300 45,400 50,400
or in the cafeteria
DIRECT AIR BLOW
TYPE
FLOOR STANDING TYPE
Specifications Page 5
Dimensions Page 10 Indoor unit FVGR05NV1 FVGR06NV1 FVGR08NV1 FVGR10NV1
Outdoor unit RUR05NY1 RUR06NY1 RUR08NY1 RUR10NY1
DUCT CONNECTION
TYPE
Specifications Page 5
Dimensions Page 11 Indoor unit FVPGR10NY1G FVPGR13NY1G FVPGR15NY1G FVPGR18NY1G FVPGR20NY1G
Outdoor unit RUR10NY1 RUR13NY1 RUR15NY1 RUR18NY1 RUR20NY1
OUTDOOR UNIT
Dimensions Page 14,15
DUCT TYPE
Specifications Page 6
Dimensions Page 12,13 Indoor unit FDR05NY1G FDR06NY1G FDR08NY1G FDR10NY1G FDR13NY1G FDR15NY1G FDR18NY1G FDR20NY1G
Outdoor unit RUR05NY1 RUR06NY1 RUR08NY1 RUR10NY1 RUR13NY1 RUR15NY1 RUR18NY1 RUR20NY1
OUTDOOR UNIT
Dimensions Page 14,15
Note : 1Rated cooling capacities are based on the following conditions: Return air temp., 27°CDB, 19.5°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 5 m (horizontal).
2
Capacity includes indoor fan motor heat.
1 2
AIR COOLED PACKAGED AIR CONDITIONERS
Standard model Temperature setting is possible by button operation. The set Pre-charged 1 Max. length Max. level
difference
Factory modification temperature is conveniently displayed on the LED. 50 m
RUR05NY1-20NY1 7.5 m (Equivalent length 70 m) 30 m
Floor Standing Type
Duct Duct Type Floor standing type (Standard accessory) 1
Note: Additional refrigerant charging is required if the refrigerant pipe is longer than the
Direct indicated length.
Connection
Air Blow
Type
9 8 Note.1 3
RUR10NY1 Auto restart
FVGR10NV1
Modify wiring for central control 6 4-direction piping affords more freedom
adapter kit (DTA107A55) installation
DUCT CONNECTION TYPE Discharge grill plenum chamber –
7
of layout (Applies to RUR05N/06N)
5 1
Piping can be run from the front, bottom, right or rear surface
Factory Modificaion
Side discharge grillon discharge plenum chamber – 2
Front suction high efficiency filter chamber – – according to how the unit is installed.
4
Note.1
Front suction base flange for front suction
– – In case of RUR08–20N, piping can be drawn out in two
high efficiency filter chamber
directions-front, and under side.
Suction grill for front suction
– – 1 On/Off button 4 Temp. setting down 7 Compressor operation lamp.
high efficiency filter chamber
2 Fan button 5 Mode button 8 Fan operation lamp.
Rear suction
Durability
3 Temp. setting up 6 LED display 9 Cool operation lamp.
Drain pump –
Note.1 It cannot be used for FVPGR10–20NY1G
Remote sensor(Thermistor for suction air) –
Note:
1
2
Wiring modification is needed on floor stand model to connect with central control ADP kit. Space savings
Need to use central control adapter kit for option connection. 1 Power 5 Next setting 9 Compressor 1 indicator lamp
3
Central control adapter kit and LCD remote controller is necessary for option connection.
2 Temperature scale 6 Fan indicator lamp 10 Temperature sensor Installation space is saved thanks to a more
RUR10NY1
FDR10NY1G 3 Temperature setting 7 Cool indicator lamp compact outdoor unit. This also makes it
4 Mode setting 8 Compressor 2 indicator lamp
easier to install.
Previous 20HP outdoor unit 53%
RUR20NY1 space saved
Reliability, long life and premium Equipped with scroll compressor for Designed for long refrigerant piping.
efficiency motor quiet operation 50 m maximum length and 30 m maximum level difference
to cover medium- and large-scale building needs. 690
mm 765
Reduce energy consumption, Smooth running, low 2,560mm 1,240mm mm
CO2 emissions and the vibration, low operating Outdoor unit roof
impact of industrial sound. installation possible
operations on the for plenty of leeway.
Sound level
environment. Outdoor unit
380V 415V
For FVPGR10-20NY1G RUR05NY1 59 dB 60 dB Max. length
FDR5-20NY1G
RUR06NY1 59 dB 60 dB
Max. level difference
3 4
FLOOR STANDING TYPE DUCT TYPE
DIRECT AIR BLOW TYPE
5HP 6HP 8HP 10HP 5HP 6HP 8HP 10HP
Model Indoor unit FVGR05NV1 FVGR06NV1 FVGR08NV1 FVGR10NV1 Model Indoor unit FDR05NY1G FDR06NY1G FDR08NY1G FDR10NY1G
Name Outdoor unit RUR05NY1 RUR06NY1 RUR08NY1 RUR10NY1 Name Outdoor unit RUR05NY1 RUR06NY1 RUR08NY1 RUR10NY1
Power supply 380–415 V, 50 Hz, 3 Phase, 4 Wires Power supply 380–415 V, 50 Hz, 3 Phase, 4 Wires
Cooling capacity 1, 3 kW 14.7 17.6 23.5 29.3 Cooling capacity 1, 3 kW 14.7 17.6 23.5 29.3
Btu/h 50,000 60,000 80,000 100,000 Btu/h 50,000 60,000 80,000 100,000
kcal/h 12,600 15,100 20,200 25,200 kcal/h 12,600 15,100 20,200 25,200
Power consumption 1 kW 5.5 6.4 8.6 11.2 Power consumption 1 kW 5.5 6.4 8.9 11.3
Running current A 9.0 10.5 14.0 18.2 Running current A 9.25 10.76 15.16 19.2
Starting current A 72.7 80.9 118.2 135.0 Starting current A 70.0 78.2 115.5 129.5
Power factor % 88.0 87.8 88.4 88.3 Power factor % 86.2 86.2 85.1 85.3
Colour lvory White Colour Galvanized steel
Indoor Indoor
Air flow rate (H) m3/min 42 42 54 80 Airflow rate (H) m3/min 46 54 68 78
unit unit
cfm 1,480 1,480 1,910 2,830 cfm 1,620 1,910 2,400 2,750
Fan Drive Direct Drive 3 Speed Fan External static pressure mmH2O 9 10
Sound level (H/M/L) 2 dBA 59/54/50 59/54/50 60/56/51 61/57/52 Driving system Belt drive
Dimensions (HXWXD) mm 1,870X750X510 1,870X750X510 1,870X950X510 1,870X1,170X510 Sound level (H) 2 dB(A) 49 51 53
Machine weight kg 90 90 107 143 Dimensions (HXWXD) mm 450X900X850 450X1,130X850 500X1,130X850 500X1,330X850
Operation range °CWB 14 to 25 Machine weight kg 74 81 97 108
Colour Ivory white Operation range °CWB 14 to 25
Outdoor
Compressor Type Hermetically sealed scroll type Colour Ivory white
unit Outdoor
Motor output kW 4.5 4.5 6.7 9.0 Compressor Type Hermetically sealed scroll type
unit
Refrigerant Model DAPHNE FVC68D POLYOL ESTER Motor output kW 4.5 4.5 6.7 9.0
oil Charge L 1.4 1.8 3.3 Refrigerant charge (R-410A) kg 2.5 (Charged for 7.5 m) 3.5 (Charged for 7.5 m) 4.5 (Charged for 7.5 m) 6.0 (Charged for 7.5 m)
Refrigerant charge (R-410A) kg 2.5 (Charged for 7.5 m) 3.5 (Charged for 7.5 m) 4.5 (Charged for 7.5 m) 6.0 (Charged for 7.5 m) Refrigerant Model DAPHNE FVC68D POLYOL ESTER
Sound level 2 380V dBA 59 59 60 61 oil Charge L 1.4 1.8 3.3 3.3
Dimensions (HXWXD) mm 1,345X900X320 1,680X930X765 Sound level 2 380V dBA 59 59 60 61
Machine weight kg 92 105 203 206 415V dBA 60 60 61 62
Operation range °CDB 21 to 46 Dimensions (HXWXD) mm 1,345X900X320 1,680X930X765
Refrigerant Indoor Liquid mm o/ 9.5 (Brazing) o/ 12.7 (Brazing) Machine weight kg 92 105 203 206
Piping unit Gas mm o/ 19.1 (Brazing) o/ 22.2 (Brazing) o/ 28.6 (Brazing) Operation range °CDB 21 to 46
Drain mm PS 1B Internal thread Piping Indoor Liquid mm o/ 9.5(Brazing) o/ 12.7(Brazing)
Outdoor Liquid mm o/ 9.5 (Flare) o/ 12.7 (Flare) connections unit Gas mm o/ 19.1(Brazing) o/ 22.2(Brazing) o/ 28.6(Brazing)
unit Gas mm o/ 19.1 (Flare) o/ 22.2 (Brazing) o/ 28.6 (Brazing) Drain mm PS 3/4B Internal thread
Drain mm o/ 26.0 (Hole) ---------- Outdoor Liquid mm o/ 9.5(Flare) o/ 12.7(Flare)
Max. interunit piping length m 50 (equivalent length 70 m) unit Gas mm o/ 19.1(Flare) o/ 22.2(Brazing) o/ 28.6(Brazing)
Max. installation level difference m 30 Drain mm o/ 26.0 (Hole) ----------
Max. interunit piping length m 50 (equivalent length 70 m)
Max. installation level difference m 30
5 6
Fan Performance
FLOOR STANDING TYPE DUCT TYPE
DUCT CONNECTION TYPE
FDR08NY1G FDR10NY1G
(mmH2O) (Pa)
FVPGR18NY1G 350
(mmH
H2O) (Pa)
UPPER : FAN PULLEY 35 140 350
FVPGR20NY1G (mmH2O)) (Pa)
( ) LOWER : MOTOR PULLEY 0rpm Upper limit of ESP 35
5
500 (standard ESP)
50
11 Upper limit of ESP Upper limit of ESP
81 2B-PD214
rpm (standard ESP) (standard ESP)
2B-PD160 300
30 300
450 0
30
45 11 130
00
rp
m
A160-24 0rp
m A150-24
130
0rp
2B-PD214 m
400 250
40 2B-PD155 25 250
20 200 200
2B-PD214 20
0
2B-PD150
30 300 10
110
0rp
m
00
rp
110
0rp
m
A140-24 A140-24
m
15 150 15
5 150
25 250
100
100 A132-24
0rp
m A132-24
0rp
m
20 200 100 10
0 100
90 10
0r
pm A125-24 900 A125-24
rpm
15 150 2B-PD214 900
2B-PD134 rpm
5 50 A116-24 5 50 A116-24
10 100 A112-24
80
0r
pm
0 0
2B-PD214 0 0 70 72 74 76 78 80 82 84 86 88 90 92 94
5 50 2B-PD125 61 63 65 67 69 71 73 74 75 79 81 82
Air flow (m³/min)
³ A106-24 A112-24
Air flow (m³/min)
³ A106-24
0 0
138 142 146 150 154 158 162 166 170 174 179 3D117526A
2B-PD214
2B-PD118 Air flow (m³/min) ³
SDR4150063
FDR13NY1G FDR18NY1G
FDR15NY1G FDR20NY1G
(mmH
H2O) (Pa) B224-28
B224 28 (mmH2O)) (Pa)
( )
350 350
35
5 35
5
Upper limit of ESP
Upper limit of ESP (standard ESP)
(standard ESP) 120
0rp
m
300 300
30
0 120
0rp
30
0
m
250 250
25
5 5
25 110
100 2B-250-3
2B-250-30
100
0rp
B186-28 0rp
m 2B-186-28
2B-186-2
m 5
15 150
15
5 150
2B-250-
2B-250-30
B177-28 2B-180-
2B-180-28
900
rpm
100
10
0 2B-250
2B-250-30
100
10
0 900
rpm
B170-28 2B-167-28
2B-167
800
B160-28
rpm 2B-250
2B-250-30
5 50
2B-160-28
2B-160
5 50
800
rpm
0 0
150 154 158 162 164 166 170 174 178 182 186 190 196 199
0 0
123 127 131 135 139 143 147 151 155 159 163 Air flow (m³/min)
³
Air flow (m³/min) 3D117527A
7 8
Wiring and Piping DIMENSIONS (Unit: mm)
510
2 Gas pipe conn. (D) C1220T brazing
3 Upper drain outlet (PS 1B Internal thread)
4 Power supply & control wire intake
5 Digital remote controller
Wiring Wiring
A 510
Refrigerant Refrigerant
piping piping
(Liquid, Gas) (Liquid, Gas)
330
Ground Ground
Ground Ground
370
35
DUCT CONNECTION TYPE
1870
1870
FVPGR10NY1G FVPGR13N/15N/18N/20NY1G
740
RUR10NY1 RUR13N/15N/18N/20NY1
150 50
1
Power Power 2
Power
100 100
4 3
Power
325
250
70
SDR3150151C
SDR3150152B
Wiring Wiring 474 SDR3150153C
B
Refrigerant Refrigerant
piping piping
(Liquid, Gas) (Liquid, Gas)
Ground
Ground Ground
Ground
FVGR10NV1
1170
510
DUCT TYPE 5 Digital remote controller
1170 510
330
Power Power Power Power Power Power
370
Wiring Wiring Wiring
35
Refrigerant Refrigerant Refrigerant
1870
1870
piping piping piping
Ground Ground Ground
(Liquid, Gas) (Liquid, Gas) (Liquid, Gas)
Ground Ground Ground
740
Remote Remote
Remote
Controller Controller Controller
150 50
1
100 100
4 3
325
250
70
9 10
DIMENSIONS (Unit: mm)
DUCT TYPE
DUCT CONNECTION TYPE
FVPGR10NY1G FDR05NY1G
1170
216 334 140 334 146 1 Liquid pipe conn. (ø 12.7) C1220T brazing
2 Gas pipe conn. (ø 28.6) C1220T brazing
31
52
6
3 Upper drain outlet (PS 1B Internal thread) 35 850 35
4 Power supply & control wire intake 756 3
5 Digital remote controller
292
510
390
9
1187
4XP.150=600
4XP.150=600
1000
735
735
900
950
510 1170
177
9 9
9
390
800 or more
40 250
571
50
Service Space
3
290
250
1200 or more
50
63
3 Drain pipe connection (PS 3/4B Internal thread)
1740
50
50
4 Earth terminal
75
724
58
58
5 Power supply
261
50 6 Suspension bracket
150
266
266
150
1
418
450
2
150 2-M4 Burring holes 9 9
100 100
4 3 (Both sides) 2-M4 Burring holes
(Both sides)
325
46
3 1
250
90 85
70
1147
470
3D062899C
SDR3150176
FVPGR13NY1G A FDR06NY1G
A B C D E F G H J K
FVPGR15NY1G B C D
FVPGR13NY1G 1170 477 398 295 344 1187 1170 1147 205 o/ 12.7
33 6
FVPGR18NY1G FVPGR15NY1G 1170 477 398 295 344 1187 1170 1147 205 o/ 15.9 35 850 35
756 3
52
FVPGR20NY1G FVPGR18NY1G 1470 558 474 438 407 1487 1470 1447 237 o/ 15.9
9
FVPGR20NY1G 1470 558 474 438 407 1487 1470 1447 237 o/ 15.9
E
602
720
5XP.180=900
5XP.180=900
5 Digital remote controller
1130
1180
1230
967
967
F
720
G J
6-M4 6-M4
Burring holes Burring holes
(Both sides) (Both sides)
5 9 9
510
50
9
800 or more
Service Space 3
50
1200 or more
1 Liquid pipe connection (ø 9.5)
1800
2 5 4 4 Earth terminal
63
50
5 Power supply
75
50
150 58
150 58
50
1 6 Suspension bracket
261
266
266
450
418
2
150
4
100 100
SDR3150177 46
3 1
250
SDR3150178 90 85
3D062900C
SDR3150179
H
70
11 12
DIMENSIONS (Unit: mm)
OUTDOOR UNIT
FDR08NY1G / 10NY1G
RUR05NY1 Hole for anchor
6 RUR06NY1 bolt 4-M12
30
39 850 39
732 3
(345 355)
9
320
350
61
48
41
30
96
140 620 140
30 900
C
D
B
A
E
A
B
4
2
F F
(Both sides) (Both sides) 1
3
10 10 7
6
1345
7
58
9
800 or more
Service Space 3 5 6
[FDR08NY1G] [FDR10NY1G]
5 5
55
1200 or more
1 Liquid pipe connection (ø 12.7)
435
55
60
410
2 Gas pipe connection (G)
223
155
95
95
95
1 5 47 4 3 Drain pipe connection
84
63
54
24
89
50
50
53
54
100
4 Earth terminal
160 67
160 67
89 19 19 80 52
5 Power supply
311
294
294
6 Suspension bracket
468
79 142 145 13 67
500
8
10 10 71 16
2-M4 Burring holes 2-M4 Burring holes
16
(Both sides) (Both sides)
1 Gas pipe connection
70 102 117
46 2 Liquid pipe connection
3 2
58
3 Service port (in the unit)
A B C D E F G 4 Grounding terminal M5 (in switch box)
Supporting plate 8
722 737
(Commercially available) 12.7 Flare connection
100 or more
1
*1
A
(Upward and downward) 2
6XP.150=900
1045
*1
7- o/ 3.1 holes
393
(Upward and
G
C
D
B
E
F
downward)
C
6 6 163 A
3 176
72.5
224
10
476.5
1680
7 DETAIL FOR FRONT SIDE
1570
7 64 64
4 4
10
172
6 1
H
55
(knock-out hole)
2
55
800 or more
205 80 205 80
9 8
393
577
(knock-out hole)
577
Service Space
5
100 177
3 4
[FDR13NY1G] [FDR18NY1G]
234
163
[FDR15NY1G] [FDR20NY1G] 500 or more 123 176
B
100 600 1 Evaporator air inlet connection 129 160 67 67 163 224
35 850 35 2 Evaporator air outlet connection 661
5
(knock-out hole) 765 DETAIL FOR BOTTOM SIDE
*1 738
*1 4- o/ 3.1 holes 3 Liquid pipe connection (J) 930
3- o/ 3.1 holes (Both sides) 4 Gas pipe connection (K)
(Both sides) 1 Liquid pipe connection port
1 5 Drain pipe connection 746
2 2 Gas pipe connection port
A B C D E F G H J K (PS 1B Internal thread) 215
3 Grounding terminal
22.5 2XP.150=300
6 Earth terminal
70
17
3XP.150=450
FDR13NY1G 10- o/ 3.1 holes 9XP.150=1350 1402 1620 1710 1750 1770 24 ø12.7 ø28.6 4 Power cord routing hole (side)
349
8
7 Power supply intake
133
5 Power cord routing hole (front)
160
544
625
FDR15NY1G 10- o/ 3.1 holes 9XP.150=1350 1402 1620 1710 1750 1770 24 ø15.9 ø34.9 8 The holes for anchor bolts 6 Power cord routing hole (front)
10 7 Power cord routing hole (bottom)
A B C D
257
FDR18NY1G 10
11XP.150=1650 1762 1980 2070 2110 2220 54 ø15.9 ø34.9
FDR20NY1G 12- o/ 3.1 holes 3D062912C
RUR08NY1 69 16 165 22.2 (knock-out hole) 45 7 (knock-out hole)
8 Wire routing hole (front)
3D062913C 9 Pipe routing hole (front) 3D062886B
38
45
61
Notes: 1Prepared holes for M4 tapping screw. 763 3D062914C RUR10NY1 75 22 171 28.6 10 Pipe routing hole (bottom) 3D062887B
805 10
13 14
DIMENSIONS (Unit: mm) Space required for indoor unit installation (Unit: mm)
1102
FVGR05NV1 FVPGR10NY1G
RUR13NY1 (Pitch of foundation bolt holes)
4-15
(Foundation bolt hole)
22.5-mm-Oblong holes
3D062890B FVGR06NV1 FVPGR13NY1G
RUR15NY1 3D062891B
FVGR08NV1 FVPGR15NY1G
737
FVPGR20NY1G
722
1
2
100 or more
100 or more
393
100 or more
171
900 or more 900 or more
163 48 176
64 Service Area Service Area
64 224
1680
1570
4 DETAIL FOR FRONT SIDE
4
6 1
(knock-out hole)
FDR05NY1G FDR13NY1G
2
9 FDR06NY1G FDR15NY1G
8
FDR08NY1G FDR18NY1G
393
577
577
(knock-out hole)
FDR10NY1G FDR20NY1G
100 177
234
163
123 176
A
129 160 163 224
972 67 67
1049 5 765 DETAIL FOR BOTTOM SIDE
1240 (knock-out hole)
213 Notes)1.Detail For Front Side And Detail For Bottom Side 2 Gas pipe connection port
Indicate The Dimensions After Fixing The Attached Piping. 800 or more
3 Grounding terminal
17
70
1200 or more
RUR13NY1 22 28.6 12.7 Liquid pipe 6 Power cord routing hole (front)
(C) Flare connection 7 Power cord routing hole (bottom)
RUR15NY1 10 8 Wire routing hole (front)
RUR18NY1 24 34.9 15.9 7 (knock-out hole) 800 or more
(knock-out hole) 45 9 Pipe routing hole (front)
RUR20NY1
10 Pipe routing hole (bottom) 800 or more
230 230
or more or more
When installing the switch box, the suspension bolt should be When installing the switch box, the suspension bolt should be
230 mm or more away from the unit 230 mm or more away from the unit
(so that maintenance can easily be carried out the switch box). (so that maintenance can easily be carried out the switch box).
Provide enough clearance between the unit and Provide enough clearance between the unit and
the surrounding walls to prevent contact. the surrounding walls to prevent contact.
Ceiling surface
Ceiling surface
720 or more
A or more
60 or more
Return air filter
(commercially avaliable)
Drain pan
Supporting plate
Return air filer (commercially avaliable)
(commercially
available)
Model
FDR05-06 type FDR08-10 type
A 520 570
15 16
Space required for outdoor unit installation (Unit: mm)
For RUR05NY1/06NY1 For RUR08NY1/10NY1/13NY1/15NY1/18NY1/20NY1 (Please refer to engineering databook for other installation patterns.)
When there is an obstruction When there is an obstruction For single unit installation For installation in rows
on the inlet side on the outlet side
Pattern 1 Pattern 1
When the overhead space is open When the overhead space is open
300 or more 300 or more
1. For single unit installation 1. For single unit
installation
When there is an
obstruction only 10 Front 10 10 Front 10
or more or more or more 20 or more 20 or more or more
on the inlet side 2. For series installation 500 or more 500 or more
ore
or m
(more than two units) 500
ore
0o
rm Pattern 2 Pattern 2
10 100 or more 100 or more
1000 or more
Wall height unrestricted
1. For single unit
Wall height
installation 300 or more unrestricted 300 or more
1000 or more
100
0o
rm
ore Pattern 1
An obstruction
200 ore in the overhead space 300 or more 300 or more
rm
or m 0o
ore 30
ore
rm 10 10 10 10
0o Front 20 or more or more Front 20 or more or more
100 or more or more
600 or more 500 or more Front
When there is an obstruction
in the overhead space
When there are obstructions on both
1. For single unit installation
the inlet and outlet sides 10 Front 20 or more
10 300 or more
When there is an or le
ss or more or more
1000 or more
500
For other patterns, please refer 500 or more 10 10
obstruction on the Pattern 1 to engineering databook. or more 20 or more or more
inlet side When the obstruction on the outlet side is higher than
the unit itself (There is no limit to the height of the
obstruction on the outlet side.) Pattern 2
An obstruction
in the overhead space 100 or more 100 or more
ore When the overhead space is open
rm
10 0o
When there are obstructions 1. For single unit installation
on the inlet side and ss
or le
1000 or more
An obstruction
in the overhead space
ore
or m
00
150 L H o re 1
or
mo or m 50 50
re 500 or more Front 100 or more or more
150 ore 50 100 or more 50
or o rm 500 or more or more 100 or more or more
mo
re 150
2. For series installation Unit : mm
2. For series installation (more than two units) (more than two units)
When there are obstructions Notes:
on the inlet side and 1
Heights of walls in case of Patterns 1 and 2:
Front : 1500 mm
both lateral Suction side : 500 mm
sides Side : Height unrestricted.
L
ss Installation space to be shown in this drawing is based on the cooling operation at 35 degrees outdoor air temperature.
1000 or more
or le
h2
500 When the design outdoor air temperature exceeds 35 degrees or the load exceeds maximum ability because of much
An obstruction ore generation load of heat in all outdoor unit,take the suction side space more broadly than the space to be shown in this drawing.
in the overhead space L H or m 2
If the above wall heights are exceeded then h2/2 and h1/2 should be added to the front and suction side service spaces
300
ore respectively as shown in the figure on the right.
rm
1500 mm
100 0o 3 Suction
h1
0o 100 When installing the units most appropriate pattern should be selected from those shown above in order to obtain the best fit in Front
Side
rm the space available always bearing in mind the need to leave enough space for a person to pass between units and wall and
ore
for the air to circulate freely.
500 mm
If more units are to be installed than are catered for in the above patterns
ore your layout should take account of the possibility of short circuits.
200 o rm
or
mo 3 00 4
The units should be installed to leave sufficient space at the front for the on site refrigerant piping work to be carried out
re
comfortably.
17 18