Professional Documents
Culture Documents
Accura 2300/2350: Distribution Panel Digital Power Meter/Power Measuring Module
Accura 2300/2350: Distribution Panel Digital Power Meter/Power Measuring Module
ACCURA
2300/2350
Distribution Panel Digital Power
Meter/Power Measuring Module
Enables True Enterprise-wide Energy Management
Revision 4.00[English]
March 07, 2022
CONTENTS
06 Enterprise-wide
Energy Management System
08 Display
11 Digital Input/Output /
Communication
12 Installation Example
14 Internal Communication
15 External Communication
16 Product Features
19 Product Specifications
24 Standards
25 Product Information
26 Ordering Information
28 Product Images
30 Product Dimensions
4 Distribution Panel Digital Power Meter/Power Measuring Module
Top 10 CO2 Emitting Countries in 2014 42 % of Global CO2 Emissions in 2014 from Electricity and
Heat Generation
The top 10 CO2-emitting countries accounted for two-thirds of global CO2 Electricity and heat(42 %) is the largest source of global CO2 emissions in
emissions in 2014. The top 2 emitters were China(28 %) and the United 2014.
States(16 %), and these two countries alone produced 14.3 GtCO2. Korea
was the world's 7th largest emitter of carbon dioxide.
Source: CO2 Emissions from Fuel Combustion Highlights 2016, IEA(International Energy Agency) Source: CO2 Emissions from Fuel Combustion Highlights 2016, IEA(International Energy Agency)
Giga tons
42 %
8 40
6 30
23 %
19 %
4 20
7 th place 10 %
2 10 6%
0 0
China United India Russia Japan Germany Korea Iran Canada Saudi Electricity Residential Industry Transport Other
States Arabia and heat
Overview
Paradigm Shift in Energy Management Limits in Applying Digital Power Meters Used in Switch-
gear Panels to Distribution Panels
When energy costs were low, energy management mainly focused on Installing digital power meters used in existing switchgear panels at
controlling the total energy supply to all loads using switchgear panels, distribution panels entails limitations, such as narrow installation space,
including incoming feeders and ABS panels for stable power supply. electrical hazards arising from the voltage and current wiring process,
However, carbon pricing policies have been implemented since 2015, and and high installation costs. It makes it difficult for energy managers to
energy costs have sharply increased. This has resulted in a rapidly growing access energy data on individual branch loads and devise practical energy
need to manage energy usage on individual branch loads in distribution efficiency measures for each branch load.
panels at various industrial facilities, manufacturing plants, IDC centers, etc.
Power Meters Specialized for Managing Major Branch Accurate Measurements: ±0.2 %/±0.5 %1 of Reading(Volt-
Loads age/Current) and Class 0.5S/Class 0.2S2(Active Energy)
The distribution panel digital power meter product line includes Accura Due to greenhouse gas emission regulations, it has recently become essential
2300 installed on the front of distribution panels(including MCC panels) to establish enterprise-wide energy management systems for efficient
and Accura 2350 installed at individual branch loads inside distribution energy usage at sites such as plants, manufacturing factories, and buildings.
panels. Accura 2300 collects power data from multiple Accura 2350 A key factor determining the reliability of energy management systems is
modules via internal communication and displays measurement data for the measurement accuracy of meters. Accura 2300/2350 perform accurate
each branch load. This enables energy managers to check power data on voltage/current measurements with ±0.2/±0.5 %1 of reading accuracy. It
individual branch loads in distribution panels, which were unavailable with also meets IEC 62053-22 Class 0.5S/Class 0.2S2standards for active energy
the existing digital power meters installed at switchgear panels. measurement. Thus, this allows for accurate analysis and diagnosis of various
problems in energy management at power facilities.
1. Accura 2350-3PSC/1PSC modules provide ±0.5 % of reading accuracy for current measurement,
and the maximum accuracy error of ±1 % may occur according to the position of the holes
cables pass through.
2. Accura 2350-1PSCSH modules meet IEC 62053-22 Class 0.2S standards for active energy
measurement.
5
The CO2 emissions reduction targets of major emitting countries are Various countries in the world have devised and implemented harmonics
as follows. The reduction rates are based on the amount of the total monitoring standards to meet the need to improve power quality.
greenhouse gas emissions in 2005.
y) Source: CO2 Emissions from Fuel Combustion Highlights 2016, IEA(International Energy Agency)
8% 8%
80 8 IEC 61000-3-6
60 6
40-45 % 5% 5%
30 % 30 % 4%
40 4
20 %
20 17 % 2
0 0
China United Europe Korea Japan Japan Europe Singapore Korea United
States States
Proven Safety and Reliability with CE/UL Certifications Through-hole Type Structure for Easier and Safer
Installation
t The products’ internal and external structures(product and circuit design) Accura 2350-3P/1P power measuring modules feature the through-hole
, meet safety and reliability requirements for CE(EN 61326-1, EN 61326-2-1, type current sensing structure that does not require electrical contact with
, EN 61010-1) and UL(UL 61010-1, IEC 61010-2-030) standards. cables or busbars. Therefore, it ensures safety from electrical accidents, as
o well as easy installations. The TM-3P terminal block also allows for easier
y electrical wiring.
MCCB
Accura 2350-3P
TM-3P
- Split-core Structure Enabling Device Installation on Live Wires Compatible with MCCBs/ELBs with Various Ratings
(Applicable for the Split-core Modules)
l Accura 2350-3PSC/1PSC/1PSCSH modules feature the split-core structure. Accura 2350-3P/1P power measuring modules are compatible with MCCBs/
t It allows for the easy installation of the products on live wires without the ELBs with a range of current ratings since they have identical installation
. need to cut off power. dimensions and wiring hole positions. Thus, when installing the products, it
s is possible to integrate them into the existing MCCBs/ELBs in distribution
e panels.
t
y
s
MCCB
t,
s
Accura 2300/2350 provide energy data on Energy managers can identify the efficiency of a
individual branch loads in distribution panels. range of high-efficiency devices to be installed,
Therefore, it allows for a true enterprise-wide energy including LED lighting, motors, and power
management in conjunction with other Accura equipment based on the highly accurate energy
products(Accura 3300S/3500S/3550S/3700/7500) data provided by Accura 2300/2350 modules.
installed in switchgear panels.
g
hin
w itcb
S Hu
7
Steel Plant
❽ Furnace ❸ Selective check
❹ First product check
❺ Assembling products Building
❽ Air conditioner in a main conference room
8 Distribution Panel Digital Power Meter/Power Measuring Module
Display
Accura 2300 Accura 2300 displays data measured by Accura 2350 modules installed at each branch load,
including voltage, current, power, energy, and maximum/minimum values, as well as power
Distribution Panel Digital
quality information such as Dip, Swell, THD, and TDD on the LCD screen. When events like
Power Meter voltage dips(sags) and swells occur, the EVENT LED and LCD backlight blink to notify users
of the occurrence of the events.
Display Mode
Event Mode
Dip Start Event Log Dip End Event Log Swell Start Event Log Swell End Event Log
9
Accura 2350 Accura 2350 module shows the display screen in the following sequence. By short pressing the
SET button, users can manually change the display screen. Long press the SET button to enter
Power Measuring the setup mode.
Module
Accura 2350-3P/3PSC
Three-phase
Power Measuring
Module
Accura 2350-1P/1PSC
Single-phase
Power Measuring
Module
Accuracy D
Energy Active IEC 62053-22 Class 0.5S (Class 0.2S)4 0.4 % Ib – 120 % Ib
6 (1.0 % Ib – 120 % Ib)5
Reactive IEC 62053-24 Class 1
1. It is the value calculated from the phase voltage/current, thus the accuracy indicates the reading error of the maximum phase voltage/current
value among three-phase values.
2. Ib indicates the basic current of Accura 2350 module. C
3. Accura 2350-3PSC/1PSC modules provides ±0.5 % of reading accuracy, and the maximum accuracy error of ±1 % may occur according to the
position of the holes cables pass through.
4. Accura 2350-1PSCSH modules meet IEC 61557-12 Class 0.2 and IEC 62053-22 Class 0.2S standards.
5. It indicates the measuring range and minimum measured value of Accura 2350-3PSC/1PSC modules.
6. The data are not displayed on the LCD screen of Accura 2300 and provided only via communication.
7. It indicates the measurement accuracy when the measurement error of an external ZCT is zero.
Power Quality
Digital Input/Output
Accura 2300 has 2 digital input channels for detecting the status of input contact points and
1 digital output channel that can be controlled in distribution panels. If you choose the RS-485
option when ordering Accura 2300, the product comes with the RS-485 communication port
instead of digital input/output ports.
Rating: DC 5 V(self-excitation)
Communication
Accura 2350 Internal 2 ports(RJ12A, RJ12B) Dedicated communication with Accura 2300
or 2350 modules
1. The built-in Ethernet switch allows for daisy-chain connection between Accura 2300 modules without a separate
external switch.
2. If you choose the RS-485 option when ordering Accura 2300, the product comes with the RS-485 communication
port instead of digital input/output ports.
12 Distribution Panel Digital Power Meter/Power Measuring Module
Installation Example
Power Measuring Front panel Accura 2300 Distribution panel digital power meter
1. If the rated current exceeds 250 A, you should use Accura 2350-3P-CT5A-75 module with external CTs(the secondary
current rating: 5 A).
2. It is provided with the product. The conducting wire of the 6C telephone line should be at least 0.128 mm2(26 AWG).
3. The device communicates with the host system via Ethernet.
6C Telephone Line
Accura 2300
RJ12-1
Accura 2350-1PSH
TM-1P
Accura 2350-1P
13
Split-core Power Measuring Front panel Accura 2300 Distribution panel digital power meter
The split-core modules make Accura 2350-1PSC Split-core single-phase power measuring module
it possible to install them on live wires Internal communication 6C telephone line2 6C telephone line used for internal communication
without cutting off power due to its External communication Ethernet 3
Ethernet cable used for external communication
split-core structure.
1. For three-phase measurements, three Accura 2350-1PSCSH modules are needed, and one module is installed for each
phase. However in 3P3W mode, only two modules are needed.
2. It is provided with the product. The conducting wire of the 6C telephone line should be at least 0.128 mm2(26 AWG).
3. The device communicates with the host system via Ethernet.
NOTE
Ethernet
Accura 2300
RJ12-1
Accura 2350-3PSC
Accura 2350-1PSC
14 Distribution Panel Digital Power Meter/Power Measuring Module
Internal Communication E
Internal communication 6C telephone line2 6C telephone line used for internal communication
1. If the rated current exceeds 250 A, you should use Accura 2350-3P-CT5A-75 or Accura 2350-3PSC-CT5A-90 module with
external CTs(the secondary current rating: 5 A).
2. It is provided with the product. The conducting wire of the 6C telephone line should be at least 0.128 mm2 (26 AWG).
It is recommended to keep a distance of over 5 mm from power lines generating high levels of noise to prevent interference.
3. Up to 15 Accura 2350-3P/1P power measuring modules can be connected to each port(RJ12-1, RJ12-2) of Accura 2300.
For details about how to connect Accura 2300 to special-purpose modules, refer to the individual user manuals of
special-purpose modules.
4. It indicates the maximum length of the 6C telephone line used to connect Accura 2300 to all Accura 2350 modules
with each port (RJ12-1 or RJ12-2) on Accura 2300.
6C Telephone Line
Accura 2350-3P-CT5A-75
Accura 2350-3P
RJ12-2
RJ12-1
Ring topology
cannot be made.
Max number of Accura 2350 modules connected to 15 modules for each Accura 2350-1P
Accura 2300 port3
External Communication
*
STP(Shielded Twisted Pair)
SFTP(Screened Foiled Twisted Pair)
** Ethernet
RSTP(Rapid Spanning Tree Protocol)
Backbone Network
****
If you choose the RS-485 option
when ordering Accura 2300, the Switching Hub
product comes with the RS-485
communication. port instead of digital
input/output ports.
RS-485
(Option
(옵션 ****)
****)
Switching Hub
Backbone Network
STP/SFTP*
Switching Hub
Ethernet/RS-485 Converter
RS-485 Cable***
Product Features
Measurement Parameters
Voltage Line-to-neutral voltage, Line-to-line voltage, Frequency, Fundamental2, 3,
Harmonics2, 3, THD
Power Quality
Dip(Sag), Swell RMS voltage values measured over 1 cycle(refreshed every half cycle)
Measurement Events
Digital Input/Output7
Power Supply
1. The LCD screen only shows the measurement data of the selected Accura 2350 module.
2. It indicates the line-to-neutral voltage and line-to-line voltage values in 3P4W mode and 3P3W mode, respectively.
3. The data are not displayed on the LCD screen of Accura 2300 and are provided only via communication.
4. The residual voltage is the RMS value calculated by summing up three-phase voltage values.
5. RSTP(Rapid Spanning Tree Protocol), IEEE 802.1D-2004.
6. Up to 16 devices can be connected to each bus at 115,200 bps.
7. If you choose the RS-485 option when ordering Accura 2300, the product comes with the RS-485 communication
port instead of digital input/output ports.
17
Power Measuring Measures various power characteristics based on the sampled current data measured in the incoming feeder
or branch load, as well as the sampled voltage data received from Accura 2300 module
Modules
Model Basic Current
Accura 2350-3P-100A-75 60 A
Accura 2350-3P-60A-75 60 A
Accura 2350-3P-CT5A-75 1 CT 5 A
Single-phase Accura 2350-1P-250A-105 250 A
Accura 2350-1P-60A-50 60 A
Accura 2350-1P-50A-35 50 A
Accura 2350-1P-30A-35 30 A
Single-phase Accura 2350-1PSH-50A-35 50 A
single-hole
Accura 2350-1PSH-30A-35 30 A
Single-phase Measurements
power measuring
module Current RMS, Fundamental, THD, TDD, Harmonics2, Residual current3, Leakage current
Power Supply
1. If the rated current exceeds 250 A, you should use Accura 2350-3P-CT5A-75 module with external CTs
(the secondary current rating: 5 A).
2. The data are not displayed on the LCD screen of 2300 and are provided only via communication.
3. The data are available only when performing three-phase measurements.
18 Distribution Panel Digital Power Meter/Power Measuring Module
1PSC/1PSCSH Measures various power characteristics based on the sampled current data measured in the incoming feeder
or branch load, as well as the sampled voltage data received from Accura 2300 module
Power Measuring
Model Basic Current
Modules
Split-core Accura 2350-3PSC-250A-105 250 A
three-phase
Accura 2350-3PSC-125A-90 125 A
Accura 2350-3PSC-60A-75 60 A
1
Accura 2350-3PSC-CT5A-90 CT 5 A
Split-core Accura 2350-1PSC-250A-105 250 A
single-phase
Accura 2350-1PSC-125A-60 125 A
Accura 2350-1PSC-60A-50 60 A
Split-core Accura 2350-1PSCSH-800A 800 A
single-phase
Split-core Accura 2350-1PSCSH-630A 630 A
single-hole4
three-phase
power measuring Accura 2350-1PSCSH-400A 400 A
module
Measurements
Current RMS, Fundamental, THD, TDD, Harmonics2, Residual current3, Leakage current
Power Supply
Product Specifications
Power consumption Max 20 VA Varies by the number of connected Accura 2350 modules
Inrush current Peak 25 A, duration: less than 2 msec (AC 220 V)2
Voltage Input
Impedance 10 MΩ/phase
Digital Input/Output14
Rating DC 5 V(Self-excitation)
Digital Input/Output14
Voltage Measurement
Power Quality
Dip(Sag), Swell RMS voltage values measured over 1 cycle(refreshed every half cycle)
Voltage Harmonic order Up to the 40th order
harmonics 11
Measurement data THD, Magnitude of each harmonic
Voltage Line-to-neutral/Line-to-line voltage unbalance according to the NEMA standard
unbalance12
Zero-sequence/negative-sequence voltage unbalance
1. The maximum tightening torque of the terminal screws of the barrier-type terminal block is 1.36 Nm(14 kgf-cm, 12 lbf-in).
2. When installing a fuse at the voltage input line, it is recommended to use a fuse above 2 A/500 V due to inrush current.
3. It is provided with the product. 4C telephone lines cannot be used.
The conducting wire of the 6C telephone line should be at least 0.128 mm2(26 AWG). It is recommended to keep
a distance of over 5 mm from power lines generating high levels of noise to prevent interference.
4. It indicates the maximum length of the 6C telephone line used to connect Accura 2300 to all Accura 2350 modules
with each port(RJ12-1 or RJ12-2) on Accura 2300.
5. Up to 15 Accura 2350-3P/1P power measuring modules can be connected to each port(RJ12-1, RJ12-2) on
Accura 2300. For details about how to connect Accura 2300 to special-purpose modules, refer to the individual
user manuals of special-purpose modules.
6. The shielded cable should be connected to the Sh port on Accura 2300
7. Up to 16 devices can be connected to each bus at 115,200 bps.
8. The maximum screw tightening torque of the barrier-type terminal block for digital input/output ports is 0.9 Nm
(9 kgf-cm, 8 lbf-in).
9. Each pulse features a pulse period and pulse-on time.
10. It indicates the device’s input voltage range, thus the primary voltage refers to the value obtained by multiplying it by
the PT ratio when using external PTs.
11. It indicates the line-to-neutral voltage and line-to-line voltage values in 3P4W mode and 3P3W mode, respectively.
12. The data are not displayed on the LCD screen of Accura 2300 and are provided only via communication.
13. The residual voltage is the RMS value calculated by summing up three-phase voltage values.
14. If you choose the RS-485 option when ordering Accura 2300, the product comes with the RS-485 communication
port instead of digital input/output ports.
21
Power Quality
Current Harmonic order Up to the 31st harmonic
harmonics
Measured data THD, TDD, magnitude of each harmonic3
Current Current unbalance according to the NEMA standard
unbalance4
Zero-sequence/negative-sequence current unbalance
1. If the rated current exceeds 250 A, you should use Accura 2350-3P-CT5A-75 module with external CTs(the secondary current rating: 5 A).
2. It indicates the current input range for the CT secondary.
3. The data are not displayed on the LCD screen of Accura 2300 and are provided only via communication.
4. The data are available only when performing three-phase measurements.
5. It indicates the measurement accuracy when the measurement error of an external ZCT is zero.
6. The predicted demand is calculated based on the assumption that the current demand value is maintained during the
remaining demand subinterval within a demand subinterval.
22 Distribution Panel Digital Power Meter/Power Measuring Module
Measurement
Frequency 50/60 Hz, 42 – 69 Hz
measurement
Sampling FFT calculation(harmonic 64 samples/cycle
measurement)
RMS calculation(basic mea- 32 samples/cycle
surement)
Current Model Basic Measuring Range Min Meas. Hole
Current (Accuracy guaranteed) Value Dimensions
Accura 2350-3PSC-250A-105 250 A 2.50 A - 300 A 1.67 A 23.0 x 31.7 mm
Power Quality
Current Harmonic order Up to the 31st harmonic
harmonics
Measured data THD, TDD, magnitude of each harmonic5
Current Current unbalance according to the NEMA standard
unbalance6
Zero-sequence/negative-sequence current unbalance
1. If the rated current exceeds 250 A, you should use Accura 2350-3PSC-CT5A-90 module with external CTs
(the secondary current rating: 5 A).
2. It indicates the current input range for the CT secondary.
3. The middle hole of the module(Phase B) is little larger than other two holes(Phases A and C) in consideration of
installing two external CTs.
4. The maximum measurement error of ±1 % may occur according to the position of the hole through which cables pass.
5. The data are not displayed on the LCD screen of Accura 2300 and are provided only via communication.
6. The data are available only when performing three-phase measurements.
7. It indicates the measurement accuracy when the measurement error of an external ZCT is zero.
8. The predicted demand is calculated based on the assumption that the current demand value is maintained during the
remaining demand subinterval within a demand subinterval.
23
Measurement
Frequency 50/60 Hz, 42 – 69 Hz
measurement
Sampling FFT calculation (harmonic 64 samples/cycle
measurement)
RMS calculation(basic mea- 32 samples/cycle
surement)
Current Model Basic Measuring Range Min Meas. Hole
Current (Accuracy guaranteed) Value Dimensions
Accura 2350-1PSCSH-800A 800 A 3.20 A - 960 A 0.80 A 43.9 x 45.1 mm
Power Quality
Current Harmonic order Up to the 31st harmonic
harmonics
Measured data THD, TDD, magnitude of each harmonic1
Current Current unbalance according to the NEMA standard
unbalance2
Zero-sequence/negative-sequence current unbalance
1. The data are not displayed on the LCD screen of Accura 2300 and are provided only via communication.
2. The data are available only when performing three-phase measurements. Three-phase measurements can be
performed by installing one Accura 2350-1PSCSH module for each phase. However, in 3P3W mode you can perform
three-phase measurements by installing two Accura 2350-1PSCSH modules for A and C phases.
3. It indicates the measurement accuracy when the measurement error of an external ZCT is zero.
4. The predicted demand is calculated based on the assumption that the current demand value is maintained during
the remaining demand subinterval within a demand subinterval.
24 Distribution Panel Digital Power Meter/Power Measuring Module
Standards
Measurement Accuracy
IEC 62053-22 Static meters for AC active energy(classes 0.1S, 0.2S and 0.5S)
IEC 62053-24 Static meters for fundamental reactive energy(classes 0.5S, 1S, 1, 2 and 3)
Power Quality
Safety
UL 61010-1 Safety requirements for electrical equipment for measurement, control and
laboratory use
EMC
IEC 61000-4-11 Voltage dips, short interruptions and voltage variations immunity
Certifications
KC KN 22, KN 24
General
Product Information
Distribution panel digital power meter product lineup includes Accura 2300 mounted on the front of distribution
panels and Accura 2350 modules mounted in branch loads(or incoming feeder) inside the panel. Accura 2300
collects data from multiple Accura 2350 modules connected with 6C telephone lines1 and displays the data on its
LCD screen.
Distribution panel Accura 2300 Collects measurement data from Accura 2350 550 g
digital power meter modules and displays the data on the LCD screen2
Performs Ethernet or RS-485 communication3
Three-phase Accura 2350-3P-250A-105 Basic current 250 A 217 g
power measuring
module Accura 2350-3P-125A-90 Basic current 125 A 196 g
Accura 2350-3P-100A-75 Basic current 100 A 155 g
Accura 2350-3P-60A-75 Basic current 60 A 155 g
Accura 2350-3P-CT5A-754 Basic current CT 5 A 155 g
Single-phase Accura 2350-1P-250A-105 Basic current 250 A 217 g
power measuring
module Accura 2350-1P-125A-60 Basic current 125 A 99 g
Accura 2350-1P-100A-50 Basic current 100 A 85 g
Accura 2350-1P-60A-50 Basic current 60 A 85 g
Accura 2350-1P-50A-35 Basic current 50 A 74 g
Accura 2350-1P-30A-35 Basic current 30 A 74 g
Single-phase single-hole Accura 2350-1PSH-50A-35 Basic current 50 A 71 g
power measuring
module Accura 2350-1PSH-30A-35 Basic current 30 A 71 g
Split-core three-phase Accura 2350-3PSC-250A-105 Basic current 250 A 428 g
power measuring
Accura 2350-3PSC-125A-90 Basic current 125A 390 g
module
Accura 2350-3PSC-60A-75 Basic current 60 A 325 g
Accura 2350-3PSC-CT5A-904 Basic current CT 5 A 244 g (excluding
mounting wings)
Split-core single-phase Accura 2350-1PSC-250A-105 Basic current 250 A 428 g
power measuring
Accura 2350-1PSC-125A-60 Basic current 125 A 188 g
module
Accura 2350-1PSC-60A-50 Basic current 60 A 158 g
Split-core single-phase Accura 2350-1PSCSH-800A Basic current 800 A 569 g
single-hole
Accura 2350-1PSCSH-630A Basic current 630 A 383 g
power measuring
module5 Accura 2350-1PSCSH-400A Basic current 400 A 383 g
Three-phase TM-3P-105 For use with Accura 2350-3P-250A-105 module 339 g
terminal block
TM-3P-90 For use with Accura 2350-3P-125A-90 module 202 g
TM-3P-75L For use with Accura 2350-3P-100A-75 module 183 g
TM-3P-75 For use with Accura 2350-3P-60A-75 module 133 g
TM-3P-105-LB6 For use with Accura 2350-3P-250A-105 module 361 g
TM-3P-90-LB6 For use with Accura 2350-3P-125A-90 module 216 g
TM-3P-75L-LB6 For use with Accura 2350-3P-100A-75 module 220 g
TM-3P-75-LB6 For use with Accura 2350-3P-60A-75 module 160 g
Single-phase TM-1P-105 For use with Accura 2350-1P-250A-105 module 246 g
terminal block
TM-1P-60 For use with Accura 2350-1P-125A-60 module 134 g
TM-1P-50L For use with Accura 2350-1P-100A-50 module 121 g
TM-1P-50 For use with Accura 2350-1P-60A-50 module 88 g
TM-1P-105-LB6 For use with Accura 2350-1P-250A-105 module 246 g
TM-1P-60-LB6 For use with Accura 2350-1P-125A-60 module 142 g
6
TM-1P-50L-LB For use with Accura 2350-1P-100A-50 module 128 g
TM-1P-50-LB6 For use with Accura 2350-1P-60A-50 module 96 g
Mounting wings Accura 2350-3PSC-CT5A-90 - 4g
2
1. It is provided with the product. The conducting wire of the 6C telephone line should be at least 0.128 mm (26 AWG).
2. The LCD screen only shows the measurement data of the selected Accura 2350 module.
3. If you choose the RS-485 option when ordering Accura 2300, the product comes with the RS-485 communication port instead of digital input/output ports.
4. If the rated current exceeds 250 A, you should use Accura 2350-3P-CT5A-75 or Accura 2350-3PSC-CT5A-90 module with external CTs
(the secondary current rating: 5 A).
5. Three-phase measurements can be performed by installing one Accura 2350-1PSCSH module for each phase. However, in 3P3W mode you can
perform three-phase measurements by installing two Accura 2350-1PSCSH modules for A and C phases.
6. LB: Long Busbar
26 Distribution Panel Digital Power Meter/Power Measuring Module
IDC(DC Current Accura 2350-IDC Measures analog DC current inputs (-20 to 20 mA)
Input)module
GW(Gateway) Accura 2350-GW Collects data from peripheral devices supporting RS-485
module communication
DCM(DC Voltage/ Accura 2350-DCM -50 V - 80 A Measures DC voltage/current up to 50 V/ 80 A
Current)module
-500 V - 80 A Measures DC voltage/current up to 500 V/ 80 A
Ordering Information
TM - 3P - 090
TM - 3P - 75L
TM - 3P - 075
TM - 1P - 105
TM - 1P - 060
TM - 1P - 050L
TM - 1P - 050
TM - 3P - 105 - LB1
TM - 3P - 90 - LB1
TM - 3P - 75L - LB1
TM - 3P - 75 - LB1
TM - 1P - 105 - LB1
TM - 1P - 60 - LB1
TM - 1P - 50L - LB1
TM - 1P - 50 - LB1
Product Images
Distribution
Panel
Digital Power
Meter
Three-phase
Power Measuring
Module
Accura 2350- Accura 2350- Accura 2350- Accura 2350- Accura 2350-
3P-250A-105 3P-125A-90 3P-100A-75 3P-60A-75 3P-CT5A-75
Three-phase
Terminal Block
Single-phase
Power Measuring
Module
Single-phase
Terminal Block
Single-phase
Single-hole
Power Measuring
Module
Accura Accura
2350-1PSH-50A-35 2350-1PSH-30A-35
29
Split-core
Three-phase
Power Measuring
Module
Split-core
Single-phase
Power Measuring
Module
Split-core
Single-phase
Single-hole
Power Measuring
Module
Special-Purpose
Modules
Accura 2350-DO Accura 2350-VDC Accura 2350-IDC Accura 2350-GW Accura 2350-GAS
Product Dimensions
145.0mm
[5.71"]
112.0mm
[4.41"]
58.2mm
152.0mm 144.0mm [2.29"]
[5.67"] 5.3mm
[5.98"] [0.21"]
119.0mm 111.0mm
[4.69"] [4.37"]
14.9mm
[0.59"]
Ø21.0mm
[Ø0.83"]
Ø16.5mm
[Ø0.65"] Ø13.5mm
[Ø0.53"]
17.5mm
[0.69"] 15.0mm
[0.59"]
12.5mm
35.0mm [0.49"]
[1.38"] 105.0mm 30.0mm 90.0mm
[1.18"] [3.54"] 25.0mm 75.0mm
[4.13"]
[0.98"] [2.95"]
35.0mm
30.0mm 25.0mm
[1.38"]
[1.18"] [0.98"]
17.5mm
[0.69"] Ø16.4mm
[Ø0.65"] Ø13.5mm
[Ø0.53"]
35.0mm
[1.38"] 15.0mm
105.0mm [0.59"]
[4.13"] 12.5mm
60.0mm [0.49"] 50.0mm
[2.36"] [1.97"]
35.0mm 30.0mm
25.0mm
[1.38"] [1.18"]
[0.98"]
60.0mm 60.0mm
60.0mm 35.0mm
41.0mm 35.0mm [2.36"] [2.36"]
[2.36"] [1.38"]
[1.61"] [1.38"]
10.5mm 34.8mm
[0.41"] [1.37"] 17.4mm 34.8mm
[0.69"] [1.37"]
15.2mm
[0.60"]
9.1mm
[0.36"]
29.5mm 28.9mm
[1.16"] [1.14"]
1P-50A-35 1PSH-50A-35
1P-30A-35 1PSH-30A-35
32 Distribution Panel Digital Power Meter/Power Measuring Module
24.0mm 24.0mm
[0.94"] [0.94"]
6.5mm 6.5mm
[0.26"] [0.26"]
19.0mm 19.0mm
[0.75"] [0.75"]
105.0mm 105.0mm
[4.13"] [4.13"]
35.0mm 35.0mm
[1.38"] [1.38"]
93.3mm
84.8mm
[3.67"]
[3.34"]
56.0mm 56.0mm
23.0mm [2.20"] 23.0mm [2.20"]
[0.91"] [0.91"]
TM-3P-105 TM-3P-105-LB*
24.0mm 24.0mm
[0.94"] [0.94"]
4.0mm 4.0mm
[0.16"] [0.16"]
15.0mm 15.0mm
[0.59"] [0.59"]
Ø9.0mm Ø9.0mm
30.0mm 30.0mm
[Ø0.35"] [Ø0.35"]
[1.18"] [1.18"]
90.0mm 90.0mm
[3.54"] [3.54"]
30.0mm 30.0mm
[1.18"] [1.18"]
72.8mm 81.3mm
[2.87"] [3.20"]
56.0mm 56.0mm
[2.20"] [2.20"]
20.0mm 20.0mm
[0.79"] [0.79"]
TM-3P-90 TM-3P-90-LB*
24.0mm 24.0mm
[0.94"] [0.94"]
4.5mm 4.5mm
[0.18"] [0.18"]
12.0mm 12.0mm
[0.47"] [0.47"]
75.0mm 75.0mm
[2.95"] [2.95"] 25.0mm
25.0mm
[0.98"]
[0.98"]
67.2mm 75.7mm
[2.65"] [2.98"]
56.0mm 56.0mm
[2.20"] [2.20"]
17.2mm 17.2mm
[0.68"] [0.68"]
TM-3P-75 TM-3P-75-LB*
24.0mm 24.0mm
[0.94"] [0.94"]
4.5mm 4.5mm
[0.18"] [0.18"]
12.8mm 12.8mm
[0.50"] [0.50"]
R4.2mm R4.2mm
25.0mm [R0.17"] 25.0mm
[R0.17"]
[0.98"] [0.98"]
75.0mm
[2.95"] 75.0mm
[2.95"] 25.0mm
25.0mm
[0.98"] [0.98"]
72.5mm 81.0mm
[2.85"] [3.19"]
56.0mm 56.0mm
22.5mm [2.20"] 22.5mm [2.20"]
[0.89"] [0.89"]
TM-3P-75L TM-3P-75L-LB*
33
24.0mm 24.0mm
[0.94"] [0.94"]
6.5mm 6.5mm
[0.26"] [0.26"]
19.0mm 19.0mm
[0.75"] [0.75"]
35.0mm 35.0mm
[1.38"] [1.38"]
105.0mm 105.0mm
[4.13"] [4.13"]
Ø9.0mm 35.0mm Ø9.0mm 35.0mm
[Ø0.35"] [1.38"] [Ø0.35"] [1.38"]
93.3mm
84.8mm
[3.67"]
[3.34"]
56.0mm 56.0mm
23.0mm [2.20"] 23.0mm [2.20"]
[0.91"] [0.91"]
TM-1P-105 TM-1P-105-LB*
24.0mm 24.0mm
[0.94"] [0.94"]
4.0mm 4.0mm
[0.16"] [0.16"]
15.0mm 15.0mm
[0.59"] [0.59"]
60.0mm 60.0mm
[2.36"] [2.36"]
Ø9.0mm Ø9.0mm
30.0mm 30.0mm
[Ø0.35"] [Ø0.35"]
[1.18"] [1.18"]
72.8mm 81.3mm
[2.87"] [3.20"]
56.0mm 56.0mm
[2.20"] [2.20"]
20.0mm 20.0mm
[0.79"] [0.79"]
TM-1P-60 TM-1P-60-LB*
24.0mm 24.0mm
[0.94"] [0.94"]
4.5mm 4.5mm
[0.18"] [0.18"]
12.0mm 12.0mm
[0.47"] [0.47"]
75.0mm 75.0mm
Ø6.0mm [2.95"] Ø6.0mm [2.95"]
25.0mm 25.0mm
[Ø0.24"] [Ø0.24"] [0.98"]
[0.98"]
67.2mm 75.7mm
[2.65"] [2.98"]
56.0mm 56.0mm
[2.20"] [2.20"]
17.2mm 17.2mm
[0.68"] [0.68"]
TM-1P-50 TM-1P-50-LB*
24.0mm 24.0mm
[0.94"] [0.94"]
4.5mm 4.5mm
[0.18"] [0.18"]
12.8mm 12.8mm
[0.50"] [0.50"]
75.0mm 75.0mm
[2.95"] R4.2mm [2.95"]
R4.2mm
25.0mm [R0.17"] 25.0mm
[R0.17"]
[0.98"] [0.98"]
72.5mm 81.0mm
[2.85"] [3.19"]
56.0mm 56.0mm
22.5mm [2.20"] 22.5mm [2.20"]
[0.89"] [0.89"]
TM-1P-50L TM-1P-50L-LB*
34 Distribution Panel Digital Power Meter/Power Measuring Module
28.9mm 28.9mm
[1.14"] [1.14"] 53.0mm
53.0mm
[2.09"] [2.09"]
14.9mm
17.4mm [0.59"]
[0.69"]
18.2mm
23.0mm 30.0mm
[0.72"] 89.8mm
[0.91"] [1.18"]
104.8mm [3.54"]
35.0mm [4.13"]
[1.38"]
18.2mm
30.0mm
23.0mm [0.72"]
[1.18"]
[0.91"]
35.0mm
[1.38"] 14.9mm
18.2mm [0.59"]
[0.72"]
23.0mm 17.4mm
[0.91"] [0.69"]
31.7mm
[1.25"]
31.7mm
[1.25"] 86.6mm
[3.41"]
86.6mm 36.0mm
[3.41"] [1.42"]
36.0mm
[1.42"]
3PSC-250A-105 3PSC-125A-90
28.7mm 53.0mm
6.5mm
[1.13"] 53.0mm [2.09"]
[0.26"]
[2.09"]
15.0mm
12.4mm [0.59"]
[0.49"]
6.2mm
13.4mm 74.8mm 30.0mm
25.0mm [0.24"] 90.0mm
[0.53"] [2.94"] [1.18"]
[0.98"] [3.54"]
31.7mm
6.5mm
[1.25"]
[0.26"]
21.3mm
[0.84"]
86.4mm
[3.40"] 70.5mm
36.0mm 36.0mm [2.78"]
[1.42"] [1.42"]
3PSC-60A-75 3PSC-CT5A-90
35
28.9mm
[1.14"]
53.0mm
[2.09"]
17.4mm
[0.69"]
28.9mm 28.9mm
23.0mm [1.14"] [1.14"]
[0.91"] 53.0mm
35.0mm 53.0mm
[1.38"] [2.09"] [2.09"]
104.8mm
[4.13"]
14.9mm 12.4mm
23.0mm
[0.59"] 59.8mm [0.49"] 49.8mm
[0.91"]
35.0mm [2.35"] [1.96"]
17.9mm 13.0mm
[1.38"] 30.0mm 25.0mm
[0.70"] [0.51"]
[1.18"] [0.98"]
17.4mm 13.0mm 12.4mm
23.0mm 14.9mm [0.49"]
[0.69"] [0.51"]
[0.91"] 17.9mm [0.59"]
[0.70"]
31.7mm
31.7mm [1.25"]
31.7mm
[1.25"] [1.25"]
86.6mm
[3.41"]
86.6mm 86.6mm
[3.41"] [3.41"] 36.0mm
36.0mm [1.42"]
36.0mm
[1.42"] [1.42"]
54.2mm
[2.13"]
51.1mm
63.0mm [2.01"]
[2.48"]
63.0mm
[2.48"]
34.5mm
69.0mm
[1.36"]
[2.72"] 26.3mm 52.5mm
[1.04"] [2.07"]
45.0mm 41.2mm
[1.77"] [1.62"]
115.0mm
122.0mm
[4.53"]
[4.80"]
36.4mm 35.6mm
[1.43"] [1.40"]
1PSCSH-800A 1PSCSH-630A/400A
Rootech provides comprehensive energy
management solutions that ensure high-
accuracy measurements and perfectly meet
customer needs.
Accura 2300S/2350, Accura 2300S/2350-1P3FSC, Accura 2500/2550, Accura 2700/2750, Accura 3000, Accura 3300E,
Accura 3300S/3300, Accura 3500S/3500, Accura 3550S/3550, Accura 3700, Accura 5500, Accura 7500 are trademarks of Rootech Inc.
Contact us for detailed product specifications and ordering information. Information contained herein is subject to change without notice.
Printed In Korea. CopyrightⓒRootech Inc. Printed In Korea