Professional Documents
Culture Documents
Grades 11 Lesson Plan I. Objectives: Basic Joints
Grades 11 Lesson Plan I. Objectives: Basic Joints
Grades 11 Lesson Plan I. Objectives: Basic Joints
I. OBJECTIVES At the end of the lesson, the students will be able to:
1. Familiarize with the basic welding joints
2. Draw the basic joints and groove weld edge preparations
3. collaboratively participate in the group activity
A. Content The learner demonstrates an understanding of the concepts and underlying principles in Shielded Metal .Arc Welding (SMAW).
Standard
B. Performance The learner independently performs Shielded Metal Arc Welding (SMAW) processes based on market standards.
Standards
C. Learning LO 2. Weld butt joint (close) in flat and horizontal position
Competencies Perform stringer beads in accordance with welding standard
TLE_IAAW9-12FW-IIIb-f-2
II. CONTENT Basic Joints
III. LEARNING
RESOURCES
A. References
1. Teacher’s Guide CG SMAW NCII
2. Learner’s
Materials Pages
3. Textbook Pages Shielded Metal Arc Welding (SMAW) - Part A pp. 9-11
4. Additional Laptop Computer, cell phones with pdf file of the reference, Projector, board and chalk
Materials from
LRMDS-
Learning
Resource (LR)
Portal
B. Other Learning
Resources
IV. PROCEDURES
Preparatory Activity Prayer
Greetings
Checking the Attendance
Page 1 of 3
Review Review from the previous topic: Different welding types
A. Activity ACTIVITY:
The students will be grouped into 4. Each group will be given a manila paper. They will draw different types of welding joints that
they remember. Each group will choose a presenter to report their output within 1-2 minutes.
B. Analysis GUIDE QUESTIONS-ACTIVITY:
1. 1. How did you find the activity?
2. 2. How did you come up with the drawing?
3. 3. Based from your output, what are the basic joints in welding?
4. 4. What are the bases of your solutions?
C. Abstraction
______ 2. T joint B.
REFLECTION
Page 3 of 3