Professional Documents
Culture Documents
Enclosure - CR 10-X CR 12-X CR 15-X - Quick Installation Guide
Enclosure - CR 10-X CR 12-X CR 15-X - Quick Installation Guide
Safety Connections (1) Perform connections at workstation. (2) Perform connections at digitizer.
WARNING:
Improper operation or service activities
may cause damage or injuries.
INSTRUCTIONS:
The following steps describe:
(1) Read the "Generic Safety Directions" Direct
document (See Agfa HealthCare Library) License network
Dongle
prior to attempting any operation, repair • Connections at NX workstation connection
or maintenance task on the equipment.
(2) Strictly observe all safety directions within • Connections at digitizer
the "Generic Safety Directions" and on the Mains HDMI to
product. DVI converter Mains
(3) Strictly observe all safety directions in (optional)
Mains
safety.cdr chapter 2 of the digitizer service manual. install_poster_02a.cdr
install_poster_003.cdr
Workstation Setup (3) Check NX SW version and switch on devices. (4) Load license. (5) Copy the NX Config Wizard to NX D:\drive.
A Copy the application license file (ALF) to the NX directory: A Insert the digitizer USB flash drive at the NX.
The following steps describe: C:\AGFA\Healthcare\NX\Configuration\Licensing
• Checking the NX software
• Loading the license file at NX
B Double-click the Licensing Manager 5
icon on the desktop.
License
• Running the NX config wizard on NX * Manager
C Select <Add License> and browse to the folder
where the ALF file is stored. Click: <open>. B Copy the folder \NX_Config_Wizard
from USB flash drive to drive D:\ on the NX.
C Re-insert the USB flash drive at the digitizer.
D Wait a few seconds until the message appears:
* config wizards for previous NX versions are The licenses have been updated. Press <OK>.
available from the Agfa HealthCare Library.
• Synchronizing the configuration database on NX E Close the License Manager. install_poster_05.cdr install_poster_06.cdr
(6) Run the Wizard: Set language, date and time. (7) Set keyboard and input language. (8) Define regional settings for new users. (9) Finalize the NX Config Wizard.
D:\NX_Config_Wizard\ActivateNXxxxxxx.exe
Change keyboards...
OK Cancel Apply
C Choose Language for the NX GUI D Next > Welcome screen and new user accounts settings
Reboot now
Text Services and Input Languages
Current user
Installed Services
Finish activation:
Ready to be activated E Activate C
New user accounts
DE German (Germany)
Keyboard
German
Add
C Add keyboard (if required) Welcome screen and system accounts
- Digitizer is configured on NX
- NX is set to
New user accounts
OK
Date and Time
H OK Cancel Apply
install_poster_08.cdr
F OK install poster 09.cdr
install_poster_10.cdr install_poster_10.cdr
Agfa Company Confidential Copyright © 2015 Agfa HealthCare N.V. Agfa HealthCare N.V., Septestraat 27, B-2640 Mortsel, Belgium
Quick Installation Guide
Installing the Digitizer at NX
(10) Login and stop NX. (11) Synchronize NX database. Installation Verification (12) Erase cassette.
A Login
User name Automatic A Double-click: "HostName Synchronizer" A Press the "Erase" button.
as service user Password
reboot The following steps describe: *
HostName
B Click: "Synchronize" Synchronizer
B Login User name
• Erasing a cassette
as service user Password
*************************************************
ARE YOU SURE?
*************************************************
12 – 14 must be performed with both, NIP and status LED turns green.
Press any key to continue ... and press any key to continue. Restart NX
PIP cassettes. D Remove cassette.
After restart of NX, digitizer status LED turns green.
install_poster_22.cdr install poster 23.cdr install_poster_24.cdr
(13) Expose flatfield. (14) Insert and identify cassette. (15) Evaluate flatfield image quality. Installation Finalization
A Insert cassette with B Identify cassette.
A Insert CU Filter If image quality is not OK:
black side facing up.
B Expose Cassette: See digitizer service manual
System chapter "Troubleshooting".
Large Focus
Diagnosis
12 mAs Genrad The following steps describe:
75 kVp
Flat • Performing the digitizer installation wizard
C Rotate cassette by 180°
1,3 m D Expose again
Field • Creating a backup
200
E Remove CU Filter • Finalizing the installation
Collimated
Area
Black side
facing up C Wait approx. 3 minutes until image transfer is complete. install_poster_15.cdr
install_poster_013.cdr
install poster 25.cdr
(16) Connect to digitizer service GUI. (17) Perform digitizer installation wizard. (18) Create a backup. (19) Finalize Installation.
192.192.192.192
A Select Service Menu "Backup".
Digitizer Installation Wizards starts up automatically: The mandatory connection and configuration steps for a
Backup standalone system are finished.
B Click: "Save to USB"
Authentication Required
Password:
C Click:
obtained in the Web based Training. - Put NX and digitizer in the local network
OK Cancel install_poster_17.cdr
install_poster_16.cdr install_poster_18.cdr
Agfa Company Confidential Copyright © 2015 Agfa HealthCare N.V. Agfa HealthCare N.V., Septestraat 27, B-2640 Mortsel, Belgium