Professional Documents
Culture Documents
fcg01 Torisetsu e
fcg01 Torisetsu e
⑬ 5G/4G antenna
Names and functions of parts area*2
⑬ ⑭⑮ ⑯
⑭ Back camera
① Stereo earphones ① ②
Peel off the ⑬
port
transparent protection
② Second-mic*1
film attached to the ⑰ ⑲
③ Earpiece*1 ③ ④ ⑤
camera at the
④ Front camera
purchase before use.
⑤ Light/Proximity ⑱
⑮ mark
sensor*1
⑯ 5G/4G/GPS/Wi-Fi®/
⑥ Display (touch panel)
Bluetooth® antenna
⑦ Mic/Recorder mic*1
area*2
⑧ USB Type-C™ port
⑰ Flash/Light
⑨ Speaker*1
⑩ ⑱ Fingerprint sensor*3
⑩ Power key ⑥ ⑲ microSD memory
⑪ Volume up key ⑪
card/SIM card slot*4*5 ⑬
⑫ Volume down key
⑫
*1 Note that covering these parts with a protection sheet,
stickers, or fingers, etc. may hinder product performance.
*2 The antenna is built into the main unit. Covering
around the antenna by your hand may affect the
quality of call/communication.
*3 Do not attach a protection sheet or stickers, etc. on
the sensors.
⑦ ⑧ ⑨ *4 Install/remove after turning off the power. To avoid
water or dust infiltration, be sure to close firmly.
*5 A nameplate is inside and a sticker bearing the IMEI
information, etc. is attached. Please do not peel off
the sticker or remove the nameplate.
• The back cover is not removable. Removing forcibly
might cause damage or a malfunction. Also, battery is
built into the main unit and not removable by customers.
1 2
2 Set SIM card into the tray (for SIM card) with the
SIM card IC (metal) part facing down
Pay attention to the location of the notch.
Your phone number etc. is SIM card
Surely set SIM card into the tray not to come off.
recorded in SIM card. IC (metal) part
SIM lock is disabled for the
product. Notch
Front Back
Slot cap
3 4
5 6