Professional Documents
Culture Documents
BOQ Butt Silo Approach Road
BOQ Butt Silo Approach Road
M E A S U R E M E N T S:
Road 1.000 100.000 6.000 0.900 540.000
M E A S U R E M E N T S:
Road 1.000 100.000 6.000 600.000
M E A S U R E M E N T S:
Road 1.000 100.000 6.000 0.400 240.000
6 H003 Providing and laying of dry lean cement concrete sub base
(conforming to IRC SP 49) over a prepared sub-grade with
combined aggregate grading conforming to IS:383, the size of
coarse aggregate not exceeding 25 mm, aggregate cement ratio
not to exceed 12:1, aggregate gradation after blending to be as
per specifications, cement content not to be less than 140 Kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7
days, mixed in a batching plant, transported to site, for all leads &
lifts, laid with a mechanical paver, compacting with 8-10 tonne
vibratory roller, finishing and curing etc. complete as per direction
of Engineerin- charge.
M E A S U R E M E N T S:
Road 1.000 100.000 5.500 0.150 82.500
M E A S U R E M E N T S:
Road 1.000 100.000 5.000 0.250 125.000
M E A S U R E M E N T S:
Road 1.000 125.000 0.010 7.850 9.813
9 H019 Providing and laying at or near ground level factory made kerb
stone of M-25 grade cement concrete in position to the required
line, level and curvature, jointed with cement mortar 1:3 (1
cement: 3 coarse sand), including making joints with or without
grooves (thickness of joints except at sharp curve shall not to more
than 5mm), including making drainage opening wherever required
complete etc. as per direction of Engineer-in-charge (length of
finished kerb edging shall be measured for payment). (Precast C.C.
kerb stone shall be approved by Engineer-in-charge).
M E A S U R E M E N T S:
Road 2.000 100.000 0.300 0.600 36.000
M E A S U R E M E N T S:
Road 2.000 100.000 0.500 100.000
11 H017 Providing and laying non-pressure NP2 class (light duty) 300mm
dia R.C.C. pipes with Socket & spigot confirming to IS 458, Rigid
joint with stiff mixture of cement mortar in the proportion of 1:2 (1
cement : 2 fine sand) filled the annular space between Socket &
spigo, laying in proper slope and gradient, this rate includes testing
of joints, excavation, backfilling and anchor blocks etc. including
cost of all labour, materials, taxes, royalties, loading and
unloading, conveyance, sundries, T & P etc complete as per
drawing/specification and direction of Engineer in charge.
M E A S U R E M E N T S:
Drain Cross 1.000 50.000 50.000