Professional Documents
Culture Documents
FR4 4806
FR4 4806
FR4 4806
http://www.nh-laminate.com.hk/our_products/fr4-4806.htm
Conditions
Copper Cladding
Max. Operating Temp (Tg) Flame Class Specific Gravity Water Absorption Solder Float o (260 C )
1 of 2
11/19/2009 11:49 AM
http://www.nh-laminate.com.hk/our_products/fr4-4806.htm
Peel Strength
1.8 N/mm (Normal state) o 1.7 N/mm (Thermal shock, 550 F 10s) 1.6 N/mm (Post exposure to process solution) 618.3 N/mm2 For 0.8mm 2 735.1 N/mm For 1.6mm 8.47 x 1011 W (Normal state) 7.5 x 1010 W m (Normal state, 500Vdc) 5.2 x 1010 W m (Damp resistance test)
Flexural Strength Insulation Resistivity Volume Resistivity Dielectric Constant Dielectric Strength Dissipation Factors Bow & Twist High Current Arc Resistance Test Hot Wire Ignition Arc Resistance High Voltage Arc Resistance Arc Tracking Rate Comparative Tracking Index
IPC-TM-650
4.3 (Damp heat, steady state 96h, 1Mhz) IPC-TM-650 29.4kv/mm (Normal state) 24.0kv/mm (Moist state) 0.0265 (Damp heat, steady state 96h, 1Mhz) 0.31% Bowed and No Twist 17 arc for 0.8mm 18 arc for 1.6mm 120+ sec to ignition for 0.8mm 120+ sec to ignition for 1.6mm 93 sec 300+ sec 368mm/min for 0.8mm 267mm/min for 1.6mm 175 ASTM D 149 IPC-TM-650 IPC-TM-650 UL 746
The properties described herein are based upon test data generated at independent laboratories and is believed to be accurate. However, the final determination regarding the suitability of the material described herein for any contemplated use is the sole responsibility of the end user. There is no warranty, expressed or implied.
Copyright 1999 Nam Hing Industrial Laminate Limited. All Rights Reserved.
2 of 2
11/19/2009 11:49 AM