Professional Documents
Culture Documents
DVMX. Between-Bearings, Multistage, Axially Split Pump. API-610,10th Edition ISO M A R E L L I
DVMX. Between-Bearings, Multistage, Axially Split Pump. API-610,10th Edition ISO M A R E L L I
Between-Bearings,
Multistage, Axially Split
Pump
API-610,10th edition
ISO 13709
M A R E L L I
Optional features
Sundyne Marelli provides the DVMX pump series with a range of customized features, to meet specific
application requirements.
Baseplate Designs
• Pre-grouted and non-grouted for all driver types.
• S
pecial base designs to match oversize drivers
or pumps.
• Tailor made baseplates are available.
• Skid mounting and oil field types available.
Applications Design
Sundyne Marelli, develops tailor made solutions for the Sundyne Marelli DVMX BB3 type pump series are horizontal
high-pressure movement of water, hydrocarbon, CO2 axial split case multi-stage pumps with opposed mounted
and other process liquids. Our solutions meet the most impellers running in heavy duty double volute casings,
stringent customer specifications for the following heavy nearly centerline mounted, that complies with API-610
industries: 10th edition / ISO 13709 standards.
Materials
According to Table H1 – API-610 10th Edition
PART
S1 S5 S6 S8 C6 A8 D1
Pressure
Carbon Steel (A216 WCB) 12% CHR 316 AUS Duplex
Casing
Impeller Cast Iron Carbon Steel 12% CHR 316 AUS 12% CHR 316 AUS Duplex
Shaft Carbon Steel AISI 4140 316 AUS 12% CHR 316 AUS Duplex
Bearing
Carbon Steel (A216 WCB)
housing
API-610,10th Edition ISO 13709 BB3 Type
Standard features and benefits
• A
PI-610, 10th Edition / ISO 13709 Full Compliance for
reliability and accountability.
• N
ear-centerline mounted pump casing maintains
alignment during operation at elevated temperatures.
• O
pposed impeller design for balanced axial thrust for Seals chamber. Designed to API-610 /
optimal seal and bearing life. ISO 13709. Ready to fit cartridge seals
under API-682 / ISO 21049.
• S
ingle suction closed impeller, with large suction eye for
low NPSH requirements.
• S
ide-Side nozzle arrangement. Nozzles are cast integrally
with lower casing half for easy disassembly without
disturbing auxiliary pipe work.
• B
alancing line design for equalizing pressures in seal
chambers for optimal seal life. Thrust bearings. Designed
with brass cage and double
• H
ighly maintainable and easily replaceable wear rings angular contact bearing.
to reduce overall life cycle costs (LCC).
• R
ing Oil Lubrication System that incorporates a constant
level oiler and a sight glass.
• D
ual volute for balancing radial thrust at each stage and
for optimizing seal and bearing life.
• C
artridge type mechanical seals for easy assembly and
proper installation.
• D
ynamic flows analysis assures stable performance and
high efficiency levels, with high mechanical reliability.
• S
eal chamber in compliance with API-682 3rd Edition /
ISO 21049, ready to accommodate single, tandem or
double mechanical seals.
• C
asings supplied under ASME B16.5 class 600,
900 and 1500.
• C
ap Nuts are arranged on the top half casing parting
flange, allowing easy casing removal for rotor inspection
and ease of maintenance.
• E
xtra large shaft diameter design to minimize deflection
in operation.
• C
hoice of multiple impellers in each hydraulic Finned bearing housing.
pump casing for optimum efficiency over a wide Improves heat dissipation.
operating range.
• A
variety of instrumentation options are available for
monitoring all key operating parameters (temperature,
pressure, vibrations, etc.). Bearing housing. Multiple
sizes available to meet load Heat exchanger.
• S
ocket welded, flanged drains and vents as standard. requirements. To improve heat
Gussets and bracing are also available. dissipation.
• L abyrinth bearing seals, deflector, to avoid external
contamination and maximizing seal and lubrication life.
Shaft. Suitable for all couplings Oil ports. Assures oil mist
defined under API-610 / ISO 13709. for every bearing.
Near-centerline
First stage impeller. Low suction
casing. Meets
specific speed and low NPSH.
API-610 / ISO
13709 nozzle loads.
Highest mechanical Flanges. ANSI B16, 600#RF,
stability. 900#RF & 1500#RF and their required
Axially split pump casing. Twin serrations. Also available flanges
volute configuration to minimize ASME/DIN/ISO/JIS.
radial loads and shaft deflections.
Flanges designed per ASME VIII.
8x10x14
6x8x11
8x10x14½
3x6x9 4x6x10 PUMPS
3x4x9
Compressors
electromagnetics
genuine parts
service
Worldwide Headquarters
Sundyne Corporation
14845 West 64th Avenue
Arvada, Colorado
USA
8x10x14
Phone: +1 303 425 0800
8x10x14½
3x6x9
4x6x10
6x8x11
Fax: +1 303 425 0896
E-mail: pumps@sundyne.com
3x4x9