Professional Documents
Culture Documents
Genset Hauling Methodology
Genset Hauling Methodology
Genset Hauling Methodology
OF PROCEDURE
HAULING AND
POSITIONING OF
GENERATOR
BY:
ALTERNATIVEPOWER SOLUTIONS, INC
EQUIPMENT TO BE LIFTED
Gross weight: 15
tons
ALTERNATIVEPOWER SOLUTIONS FAX NO. (02) 5195512
TEL NO. (02) 5190304
, INC EMAIL ADDRESS:
1424 LIBRADA AVELINO ST. apsi@alternative power
solution.net
PANDACAN MANILA
LIFTING ORGANIZATIONS
LIFTING PERSONNEL INCHARGE
● NOEL ALCANTARA LIFTING SUPERVISOR 09228481162
● MARK SATURNO SAFETY OFFICER 09328851337
● JOEL RICO LEADMAN 09182238478
● FRANKIE MAZO LEADMAN 09429820038
TOOLS AND EQUIPMENT FOR LIFTING
AND HAULING OF TRANSFORMER
● Mobile Crane for lifting
of basket and generator.
Spreader to spread the sling wire.
● Shackles attach at the
spreader.
● Solid bar at the bottom of
Generator for moving.
(Capacity of 1020 tons)
● Solid CChannel for
manual pushing of
generator.
● Roller Tank for moving of
generator.
● Hydraulic Jack for lifting
of generator (Capacity of
10 tons)
● Chain block 10 tonner for
pulling of generator.
PREPARATION FOR LIFTING OF
GENERATOR
● Make sure the working area and staging area is
clear for obstruction
● Safety Orientation
● Secure work and lifting permit
● Lifting Final briefing (Toolbox Meeting)
● Tools preparations
● Lift the generator using of hydraulic jack and insert
the roller tank at the bottom of generator.
● Move the generator at near position of mobile crane
for lifting.
● Set up the mobile crane
● Install sling wire and spreader.
● Attach the sling wire at the generator for lifting
● Lifting of generator through previous location of
alimak shaft.
● When the generator reach the B1 install roller tank
at the bottom of generator and move to concrete
pad.
● Attach chain block on generator for moving.
● Position the generator on the approve drawing and
position.
THANK YOU
ALTERNATIVEPOWER SOLUTIONS, INC