Professional Documents
Culture Documents
Calibration Procedure
Calibration Procedure
1. Calibration of 16 RPM
1. Connect Motor
2. Connect Potentio-meter (volume)
3. Connect Power supply
4. Insert Jumper in “16” RPM position
5. Insert jumper in “POT” position
6. Now adjust RPM by turnning Potentio-meter (Volume)
Rotate Potentio-meter (Volume) anti-clock wise to increase RPM
Rotate Potentio-meter (Volume) clock wise to decrease RPM
7. Remove jumper from “POT” position to finish calibration after setting desired RPM.
2. Calibration of 19 RPM
1. Connect Motor
2. Connect Potentio-meter (volume)
3. Connect power supply
4. Insert Jumper in “19” RPM position
5. Insert jumper in “POT” position
6. Now adjust RPM by turnning Potentio-meter (Volume)
Rotate Potentio-meter (Volume) anti-clock wise to increase RPM
Rotate Potentio-meter (Volume) clock wise to decrease RPM
7. Remove jumper from “POT” position to finish calibration after setting desired RPM.